Airtronics ATX035 M8 75MHz Synthesized Module User Manual Attachment to Users Manual

Airtronics Inc M8 75MHz Synthesized Module Attachment to Users Manual

Contents

Attachment to Users Manual

Download: Airtronics ATX035 M8 75MHz Synthesized Module User Manual Attachment to Users Manual
Mirror Download [FCC.gov]Airtronics ATX035 M8 75MHz Synthesized Module User Manual Attachment to Users Manual
Document ID413789
Application IDHX6QEiThk8MAw5LfWT45hw==
Document DescriptionAttachment to Users Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize46.86kB (585774 bits)
Date Submitted2004-04-13 00:00:00
Date Available2004-06-07 00:00:00
Creation Date2004-04-13 15:37:56
Producing SoftwareAcrobat 4.0 Import Plug-in for Windows
Document Lastmod2004-04-13 15:38:25
Document TitleAttachment to Users Manual
Document CreatorAcrobat 4.0 Import Plug-in for Windows

%AIBTMNIL‘$“ —
Get The Advantage
Yhaiik you tor purchasing your new Airtroniee Synthesizer product. This manual will cover
both 27 and 75 MHz ME synthesized modules as well as both 27 and 75 MHz synthesized remlvers,
Beiore installing and using your new synthesized product. please read this manual careiuiiy first.
With your new synthesizer product. you now have the ability to change channel ireouencias with just
a turn ol‘ a dial This makes channel irequericy changing last and easy No more having to remove and
replacing crystals. Sy hestzed Receivers 27 and 75 MHz
PLEASE NOTE: Beiore you turn on the transmitter and receiver power switch. make certain that the “sum you, symmeszed New
Pm” °“’""°' “Wm“ '5 59's?“ °" “ll‘ me l’flf‘sm‘m” “5 '°°°"""' CMCK'“ (“film “W "u“ Make sure you install your synthesized receiveras far away as possible from ESC's. electric motors and
the channel'requencii you are some to use Is not being used by someone else- Tummfl 0" W" use double sided learn tape to secure in place. DO NOT hard mount the receiver to the chases.
lmnsminel when ll ls an the same channel liequency as someone else will cause [ham to lose Conlvol
and could cause daniaga.Always make sure it is sale to use PM: In ms “was and mam, Paws, to me prover smi
with the power in the oit position, adjust the channelirequency dials using the supplied screwdriver. See
examples under M8 Synlhesizad Modules.
M8 Syn he ed Modules 27 and 75 MHz
Alteryour channel ireeuancy has been set. make sure it is sale to turn on your transmitter rirst.
llyour Me has a standard crystal type module, you can remove it by compressing the two tabs locales Voul transmitter must always be turned on first belore the receiver and the receiver must be turned oil
on both sides at the module and gently pull me module out beiore your transmnter is turned oil
asters instaiiing the new synthesized module. please notice the long pin connectors located on the ,
light side olthe module cavity, Setting for CH 89 7 Selling for CH 4
Align the pins with the holes in the synthesized module and gently insertthe module in place. Make ' so is l ‘ 5a
sure that both side taps are locked in place, “ZXE: “2h“; ‘ ix?
0' a
The lait dial on the synthesized module is used fortha first digit oitha channel number and the right Flllelgll'B" singie Dlal w
is lortha second digit. Sea drawlng below tor example same Dm J
7 7 7277 MPH
NOTE: Transmitter power must be In (he offfiaslllan when charming chin/leis.
Setting lor channel as Channel Frequ “GIGS
Wa rra my
V75Ml-iz i" ii“
l if} “(032 Firs! Digit use only: 6.7.9.9
l - - - i
FlrstDlQll”5" l 5m“ D'g“ “5° 0 1 13,455,153 22 Your synthesized module and or Receiver carries a 90 day warranty.
second Digit is“ i See channel “mm mm m, 5 Failure to read and ioiiow warnings can result in the destruction oi
i 77) “nab“, 75 MHZ chmmls_ 55 your module and or receiver and wlli void any stated or implied
ea warranty, so please read them carefully prior to installation.
2; 75 55° Arly warranty repair rriost be sent to Alrtronlcs. inc. and must
, l 69 755,“ include a copy oiyoursales receipt before any warranty work can
Setting lor channel 4 i W 75590 be “one
i ii rsaio
singe Dial use only i.2,3.4,5,e 35 $23
7. 75570
See channel irequency chart lor rs 75590
available 27 MHz channels. 3? gig
35 I; Egg www.Airtronics.net
After selecting a channel frequency, make sure your receiver is on the same channel lrequenq/ beiore 3? lg 23
turning on eighterthe transmittsror receiver. it your are using a ciysmi type receiver. adiustihe module a, 75334:
to the receivers channel number. The synthesizer module will work with olherAirlmntcs FM crystaitype ea 75550
receivers as well. Just make sure the channel iraquancies match on both transmitter and receiver. 3 $233;
as 75910
57 2593“ Airtronrcs, the
fi £32“; l 1155 Stanford Court
at 75990 l Anaheim, CA 92305th (714) 975-1895 Fax: (714) 975-1540

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Modify Date                     : 2004:04:13 15:38:25-07:00
Create Date                     : 2004:04:13 15:37:56-07:00
Creator                         : Acrobat 4.0 Import Plug-in for Windows
Producer                        : Acrobat 4.0 Import Plug-in for Windows
Page Count                      : 1
EXIF Metadata provided by EXIF.tools
FCC ID Filing: AXYATX035

Navigation menu