Airwave Technologies AWW902TX wireless camera User Manual Manual AWWS916A 930506

Download:
Mirror Download [FCC.gov]
Document ID	425127
Application ID	nwTjmx9SluZE8pikv5co5g==
Document Description	users manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	4.36kB (54491 bits)
Date Submitted	2004-05-25 00:00:00
Date Available	2004-05-25 00:00:00
Creation Date	2004-05-06 15:19:27
Producing Software	pdfFactory Pro v1.57 (Windows 2000 Chinese)
Document Lastmod	2004-05-07 03:11:23
Document Title	Microsoft Word - Manual-AWWS916A_930506.doc
Document Creator	pdfFactory Pro http://www.pdffactory.com
Document Author:	a0272

Wireless Camera/Baby Monitor
Display
Receiver
AWW902/AWWS916
Volume Control
Features:
1.
Crisp picture and voice quality.
2.
Handset size monitor, suitable for hand-held, pocket, or stationary display.
3.
Power save mode by turning video off when only voice monitoring is needed.
4.
Use 2.4GHz ISM band for RF transmission.
5.
Battery for 3 hours audio & video operation, or 5 hours voice only operation.
6.
Receiver can output to TV or VCR.
7.
Other applications include security surveillance, activity monitoring, etc.
Brightness
Channel Selector
Status Indicator
Line Out
Ear Phone
Power Jack
How to use:
1.
a)
Identify the following parts:
Display On/Off
Power On/Off
Camera
Antenna
Power On/Off
Microphone
Wireless Camera unit
Power Indicator
b) Wireless Receiver unit
c)
Two power adapters
(Input: either AC120V/60Hz for US or AC230V/50Hz for Europe)
IR LED
d) Ear Phone - RCA cable
e)
2.
a)
This Instruction pages
Lens
To activate wireless camera:
Channel selector
Plug the power adapter into the power jack.
Power Jack
b) Turn on the power with the power on/off switch.
c)
3.
a)
Select any one of the channels with Channel selector.
To activate wireless receiver:
Plug power adapter in to power jack or install 3 AA batteries.
b) Push power on/off button to turn on the power.
c)
Set the channel same as the one on the camera.
d) Adjust the volume control.
e)
4.
a)
Now the receiver shall start to function
Silent mode / Video mode
You can enter the power saving mode when baby is silent by simply pressing
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
the “Display on/off” button once
b) When some voice heard, the receiver will automatically go back to video mode
Any changes or modifications not expressly approved by the party
responsible for compliance could void the authority to operate equipment.
PDF created with FinePrint pdfFactory Pro trial version http://www.pdffactory.com
Notice:
1.) The Baby Monitor can transmit and receive audio and video
signals on four distinct frequencies, or channels. This allows you to
monitor up to four different cameras using a single receiver, to
monitor a single camera with two receivers, or to use any other
combination of transmitters and receivers.
2.) If baby monitor reception is not clear, select a different channel for
both the camera and receiver.
3.) Do not place camera in direct sunlight or high light, or expose to
excessive dust or humidity. Never aim camera directly into the sun.
4.) There is a Power indicator on the top-front of camera to show the
power-on status.
5.) For the receiver, under normal operations, the green power-on
signal flash slowly, but when the power is low, the green signal
will flash fast and the system will automatically shut down. There
is no audible or video warning prior to shutdown.
6.) The receiver is designed for portability and convenience. It can be
held in your hand and carried around, stored in a packet, or placed
at a comfortable viewing angle on a flat surface.
Specifications:
1. Frequency range:
2. Channel:
3. Video format support:
Transmitter (Camera)
4. V/A modulation type:
5. Lens:
6. View angle:
2400-2483MHz
4 Channels
NTSC or PAL-S
FM/FM
F1.8, f6.0mm
120∘
7. Image sensor:
8. Effect pixels:
1/3” CMOS image sensor
NTSC－510(H) X 492(V)
PAL － 628(H) X 582(V)
9. Resolution:
10. Minimum illumination:
11. Auto white balance:
12. Auto electronic exposure:
13. Video signal format:
14. Power consumption:
More than 230 TV lines
3 Lux (F1.2)
Auto
1/60-1/15000 second
Composite video sync. Positive
DC12V/300~350mA
Receiver
15. Receive sensitivity:
16. Display screen & type:
17. Display resolution:
18. View angle:
19. Headphone output power:
20. A/V output:
21. Battery type:
22. Adaptor:
23. Standby current :
-85dBm
1.8” (4.6cm) diagonal TFT LCD
558(H)*234(V) dot
Up:17∘Down:35∘
Left & Right: 45∘
15mW into 32 Ohms headphone
3.5 mm Phone jack
“AA” battery X 3 (option)
DC6V/600~700mA regulated
10mA
DOC0000-0202
PDF created with FinePrint pdfFactory Pro trial version http://www.pdffactory.com

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Encryption                      : Standard V1.2 (40-bit)
User Access                     : Print, Fill forms, Extract, Assemble, Print high-res
Create Date                     : 2004:05:06 15:19:27Z
Modify Date                     : 2004:05:07 03:11:23+08:00
Page Count                      : 2
Author                          : a0272
Producer                        : pdfFactory Pro v1.57 (Windows 2000 Chinese)
Creation Date                   : 2004:05:06 15:19:27Z
Mod Date                        : 2004:05:07 03:11:23+08:00
Metadata Date                   : 2004:05:07 03:11:23+08:00
Title                           : Microsoft Word - Manual-AWWS916A_930506.doc
Creator                         : a0272

EXIF Metadata provided by EXIF.tools