Akai CD3000XL CD3000XL(E) User Manual To The A162e467 990d 4202 Bc19 C0fca7afd268

User Manual: Akai CD3000XL to the manual

Open the PDF directly: View PDF .
Page Count: 323 [warning: Documents this large are best viewed by clicking the View PDF Link!]

Scroll down to view the document on your mobile browser.

WARNING
CONTENTS
INTRODUCTION
- FEATURES
- ABOUT THIS MANUAL
- FRONT PANEL
- CD ROM DRIVE FEATURES
  - MAINTAINANCE
- FLOPPY DISK DRIVE
- TAKING CARE OF YOUR DISKS
- REAR PANEL
- SETTING UP THE CD3000XL
- LOADING THE DEMO FLOPPY DISKS
- MOUNTING THE CD3000XL
- GETTING AROUND THE CD3000XL
- LCD CONTRAST
- RECORD LEVEL, MAIN VOLUME, HEADPHONE OUTPUT
- HOW THE CD3000XL WORKS
- CD3000XL FLOWCHART
SINGLE MODE
- SELECTING PROGRAMS
- VIEWING PROGRAMS
- SETTING UP THE CD-ROM
- MARKING FILES
- SEARCHING FOR FILES ON THE CD-ROM
- LOADING SETUPS FROM FLOPPY
- SCROLLING THROUGH MARKED FILES
- USING SETUPS
- SETTING PROGRAM LEVELS, PAN, FX SENDS
- SETTING PROGRAMSﾕ MIDI PARAMETERS
- SETTING PROGRAM LOUDNESS AND VELOCITY
- LOADING FROM FLOPPY DISK
- LOADING FROM HARD DISK
- DELETING PROGRAMS
- RENUMBERING PROGRAMS
- USING THE CD3000XL IN ﾔOLD AKAIﾕ MODE!
MULTI MODE
- ASSIGNING PROGRAMS TO PARTS
- SETTING A PARTﾕS MIDI CHANNEL
- MIXING THE PARTS
- SENDING PARTS TO THE INTERNAL EFFECTS
- ASSIGNING PARTS TO THE INDIVIDUAL OUTPUTS
- TUNING AND TRANSPOSING PARTS
- SETTING A PARTﾕS LOW AND HIGH KEYRANGES
- SETTING A PARTﾕS PRIORITY
- INITIALISING A PART
- SETTING UP A MULTI
- MODIFYING THE MULTI
- NAMING A MULTI
- SAVING A MULTI
- LOADING A MULTI
- RENUMBERING PROGRAMS
- USING MULTI MODE FOR LAYERING PROGRAMS
- USING MULTI MODE TO SET KEYBOARD SPLITS
- COMBINING THESE TECHNIQUES
PROGRAM EDITING
- WHAT IS A KEYGROUP?
- KEYGROUP ZONES
- OVERLAPPING AND CROSSFADING KEYGROUPS
- ASSIGNABLE PROGRAM MODULATION
- EDIT SINGLE
- NAMING PROGRAMS - COPYING AND RENAMING
- DELETING PROGRAMS
- MIDI PAGE
- OUTPUT LEVELS PAGE
- PAN PAGE
- THE TUNE PAGE
- MODULATION PAGES
  - PITCH BEND
  - LFO1
  - SETTING LFO1 MODULATION DEPTH
  - LFO2
  - SETTING UP THE SOFT PEDAL
  - PORTAMENTO
    - NOTES ON USING PORTAMENTO
- KEYGROUP PARAMETERS - CREATING KEYGROUPS
  - MAPPING OUT YOUR KEYGROUPS - SETTING KEYSPAN
- ASSIGNING SAMPLES TO KEYGROUPS AND ZONES - SMP1
  - SMP2
  - SMP3
- THE FILTERS
- ENV1 - SHAPING AMPLITUDE
- ENV2 - SHAPING THE FILTER
  - USING THE FILTER AND ENVELOPE GENERATORS
- THE SECOND FILTERS
  - CREATING 24db/8ve 4-POLE LOWPASS FILTER
  - THE TONE PAGE
- ENV3
- KEYGROUP PITCH/AMPLITUDE MODULATION
  - SUGGESTIONS FOR THE PITCH MOD2 INPUT
EDIT MULTI
- SCREEN DIFFERENCES IN EDIT MULTI
SAMPLE MODE
- WHAT IS SAMPLING?
- RECORD MODE
- THE MAIN RECORD PAGE
- RECORDING FROM AUDIO CDs
- NAMING SAMPLES IN THE RECORD PAGE
- ADJUSTING THE RECORDING AND THRESHOLD LEVELS
- RECORDING ON THE CD3000XL
- DIGITAL RECORDING
EDIT SAMPLE
- NAMING SAMPLES - COPYING AND RENAMING
- DELETING SAMPLES
- TRIMMING SAMPLES
- LOOPING
- LOOP AUTO FIND AND CROSSFADE LOOPING
  - MAKING A GOOD LOOP
- LEVEL NORMALISATION
- DSP FUNCTIONS - TIMESTRETCH, RE-SAMPLING AND EQ
- FURTHER EDITING FUNCTIONS
EFFECTS MODE
- ORGANISATION OF EFFECTS FILES
- ASSIGNING EFFECTS TO SINGLE PROGRAMS
- ASSIGNING EFFECTS TO MULTI PARTS
- ASSIGNING EFFECTS TO INDIVIDUAL KEYGROUPS
- PROCESSING EXTERNAL SOUND SOURCES THROUGH THE EFFECTS
- ROUTING EXTERNAL SOUNDS THROUGH THE EFFECTS
- SELECTING THE EFFECTS OUTPUT
- CHAINING EFFECTS
- MUTING EFFECTS
EFFECTS EDIT
- DISTORTION/RING MODULATION
- EQ
- MODULATION EFFECTS
- DELAY AND ECHO EFFECTS
- REVERB EFFECTS
  - REVERSE REVERB
  - GATED REVERB
- EFFECTS OUTPUT SECTION
- EFFECTS DIRECTION
- SOLOING THE CURRENT EFFECT
- COPYING EFFECTS
  - COPYING EFFECTS BETWEEN DIFFERENT EFFECTS FILES
SAVE MODE
- SELECTING FLOPPY OR HARD DISK
- SELECTING THE HARD DISK PARTITION
- SELECTING THE HARD DISK VOLUME
- SELECTING THE TYPE OF SAVE
- SAVING TO FLOPPY DISK
- SAVING TO HARD DISK
- RENAMING FILES
- DELETING ITEMS FROM DISK
- HARD DISK CONTROL
- FORMATTING A FLOPPY DISK
- FORMATTING A HARD DISK
- NOTES ON USING EXISTING S1000/S1100 SOUND LIBRARY
LOAD MODE
- SELECTING FLOPPY OR CD-ROM
- SELECTING THE HARD DISK OR CD-ROM PARTITION
- SELECTING THE HARD DISK OR CD-ROM VOLUME
- SELECTING THE TYPE OF LOAD
- LOADING FROM FLOPPY DISK
- LOADING FROM HARD DISK OR CD-ROM
- LOADING S900/S950 SAMPLES AND PROGRAMS
- LOADING S1000/S1100 DATA
- AUTO LOADING FROM DISK
- SEARCHING FOR FILES - USING THE FIND FUNCTION
- USING THE TAG DIRECTORY SYSTEM
  - NAMING TAGS
  - NOTES ON USING THE TAGGING SYSTEM
- HARD DISK CONTROL
- IMPORTING SOUNDS FROM OTHER MANUFACTURERﾕS CD-ROMS
  - NOTES REGARDING LOADING OTHER MANUFACTURERS SOUND LIBRARY
GLOBAL MODE
- TUNING THE CD3000XL
- SETTING THE MASTER OUTPUT LEVEL
- MIDI FUNCTIONS
- ME35T DRUM SETTINGS
- DAT BACK-UP AND RESTORE
  - PERFORMING A DAT BACK UP
  - PERFORMING A DAT RESTORE
- STANDARD MIDI FILE - MIDI SONG FILE PLAY
  - LOADING STANDARD MIDI FILES
  - USING THE SMF FUNCTION
- HARD DISK RECORDING
FLASH ROM
- HOW THE FLASHROM WORKS
- FORMATTING THE FLASHROM
- ARRANGING THE FLASHROM
- SAVING DATA TO THE FLASHROM
- USING THE FLASHROM AS A FAST HARD DISK
- EDITING SOUNDS ON THE FLASHROM
- COPYING A FLASHROM SAMPLE TO RAM
- SAVING FLASHROM DATA BACK TO DISK
- BACKUP/RESTORE OF THE FLASHROM TO/FROM DAT
APPENDIX 1
- CONNECTING AN EXTERNAL HARD DISK DRIVE
- NOTES ON USING HARD DISK DRIVES
APPENDIX 2
- DATA COMPATIBILITY ISSUES
APPENDIX 3
- INSTALLING THE OPTIONSﾑTO SERVICE TECHNICIANS
- INSTALLING MEMORY EXPANSION
- INSTALLING THE FLASHROM
APPENDIX 4
- S3000XL SYNTHESISER PANEL
APPENDIX 5
- MIDI CONTROLLER LIST
SPECIFICATIONS
MIDI IMPLEMENTATION CHART

Navigation menu