Akg Acoustics Solid Tube Condenser Microphone Users Manual Data Sheets/tiffs
Tube Condenser Microphone to the manual 0649d6c6-ad9e-5794-b1cb-583d1b50ea4a
2015-02-05
: Akg-Acoustics Akg-Acoustics-Solid-Tube-Tube-Condenser-Microphone-Users-Manual-506099 akg-acoustics-solid-tube-tube-condenser-microphone-users-manual-506099 akg-acoustics pdf
Open the PDF directly: View PDF .
Page Count: 2
Download | |
Open PDF In Browser | View PDF |
SOLIDTUBE Tube Condenser Microphone Description The AKG Model Solidtube is a large diaphragm condenser microphone that benefits from the combination of modern solid-state technology and vacuum tube driven circuitry. The microphone, released in 1997, AKG’s Jubilee year, provides the characterisitc warmth and generous margin of overload expected from classic tube powered designs. Solid state electronics within the N-Solid power supply ensure quiet and reliable operation. The Solidtube has a large double screened housing that reacts minimally with the capsule and provides shielding from RF interference. Frequency response remains relatively flat within the range of ±2 dB. The mid-range cut at approximately 2 kHz and presence rise above 10 kHz are signature characteristics of AKG large diaphragm condenser mics dating back to the classic C 12. They provide depth and clarity to any recording. Mid-band pattern rejection at 1800 is in excess of 20 dB. The microphone is response tailored for solo vocal and instrumental pickup in the studio, and as such, has only a dedicated cardioid pattern. The Solidtube is shipped with all necessary cabling, an isolation shock mount, windscreen and a custom aluminum flight case. Specifications SOLIDTUBE Microphone: Transducer type: 1 in. (25 mm) diaphragm pressure gradient Diaphragm material: Gold-sputtered mylar foil Tube type: ECC 83 (12AX7) Frequency response: 20 Hz - 20 kHz Polar pattern: Cardioid Impedance: 200 ohms ±25% Recommended load impedance: greater than 600 ohms Sensitivity at 1 kHz: 20 mV/Pa; -34 dB (dB re 1 V) Equivalent noise level (A-weighted): 20 dB-A (DIN 45412) Sound pressure level for 3% THD: 130 dB (145 dB SPL with 20 dB pre-attenuation) Dynamic Range: 110 dB S/N ratio re 1 Pa (A-weighted): 74 dB Pre-attenuation switch: -20 dB Low frequency roll-off: 12 dB/octave below 100 Hz Current consumption: less than 2 mA Microphone size: 2.5” (63.5 mm) diameter; 8.6” (219 mm) length Microphone net weight: 2 lb. (0.92 kg) Features • Dedicated cardioid pattern with response tailored to solo vocals and instrumentals in the modern studio • Wide dynamic range of 110 dB in the studio • Integral 20-dB pre-attenuation switch • Low frequency cut at 100 Hz • Includes aluminum flight case, with all necessary cabeling, shock mount and windscreen Specifications contd. SOLIDTUBE Power Supply: Power requirements: 115/230 Vac Current consumption: 40 mA @ 230 Vac, 80 mA @ 115 Vac Fuse size/type: Type TO, 1 A slow blow, (5 x 20 mm) Power supply dimensions: 9” x 2.8” x 5.9” (W x H x D), (228 x 70 x 150 mm) Power supply weight: 3.2 lb. (1.5 kg) Microphone connector: 6 pin XLR Output connector: 3 pin XLR LF cut: 12 dB/octave, 100 Hz Ground lift: isolates signal ground from chassis ground Included accessories: N-SOLIDTUBE power supply unit H-SOLID elastic shock mount suspension MK-SOLID power supply cable 30 ft. (10 m) W-SOLID foam wind/pop screen Power cables (European and North American) Custom flight case SOLIDTUBE system shipping weight: 11 lb. (5.0 kg) Architects and Engineers Specifications The microphone shall be a 1 inch tube type condenser with a dedicated cardioid pattern. The diaphragm material shall be goldsputtered mylar foil, and the on-axis sensitivity shall be no less than 20 mV/Pa. The inherent noise floor of the microphone shall be no greater than 20 dB (A-weighted), and the operating sound field for 3% THD shall be no less than 130 dB. The microphone size shall be no greater than 2.5 inches in diameter and 8.62 inches in length, and the microphone net weight shall be no greater than 2.02 pounds. The microphone shall be powered by an external power supply. Facilities for low cut, 12 dB/octave at 100 Hz, and pre-attenuation of 20 dB shall be included. An aluminum flight case, all cabling, isolation shock mount, and windscreen shall be included as standard accessories.The microphone shall be the AKG Acoustics Model SOLIDTUBE. AKG is constantly improving and modifying its products, therefore, specifications are subject to change without notice. Graphical Data Cardioid Limited Warranty Valid only in the United States. AKG Acoustics warrants AKG products against defects in material or workmanship for a period of three years from the date of original purchase for use, and agrees to repair or, at our option, replace any defective unit without charge for either parts or labor. Important: This warranty does not cover damage resulting from accident, misuse or abuse, lack of reasonable care, the affixing of any attachment not provided with the product, loss of parts or connecting the product to any but the specified receptacles. This warranty is void unless service or repairs are performed by an authorized service center. No responsibility is assumed for any special, incidental or consequential damages. However, the limitation of any right or remedy shall not be effective where such is prohibited or restricted by law. Simply take or ship your AKG product prepaid to our service department. Be sure to include your sales slip as proof of purchase date. (We will not repair transit damage under the no-charge terms of this warranty.) Note: No other warranty, written or oral is authorized by AKG Acoustics, Inc. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Some states do not allow the exclusion or limitation of incidental or consequential damages or limitation on how long an implied warranty lasts, so the above exclusions and limitation may not apply to you. Microphones · Headphones · Wireless Microphones · Wireless Headphones · Headsets · Electroacoustical Components AKG Acoustics GmbH Lemböckgasse 21–25, P.O.B. 158, A-1230 Vienna/AUSTRIA Tel: (43 1) 86 654-0*, Fax: (43 1) 86 654-516 Internet: http://www.akg.com AKG Acoustics; A Division of Harman Pro Germany Bodenseestraße 228, D-81243 München/GERMANY Tel: (089) 87 16-0, Fax: (089) 87 16-200 Arbiter Pro Audio Wilberforce Road, London NW9 6AX/ENGLAND Tel: (0181) 202 1199, Fax: (0181) 202 7076 Specifications subject to change without notice. AKG ACOUSTICS, U.S. 914 Airpark Center Drive Nashville, TN 37217, U.S.A. Tel: (615) 620-3800, Fax: (615) 620-3875 Studer Japan Ltd. 2-43-7, Uehara, Shibuya-ku, Tokyo 151-0064/JAPAN Tel: (813) 3465-2211, Fax: (813) 3465-2214 Erikson Pro Audio 620 McCaffrey, St-Laurent, Quebec, H4T 1N1, CANADA Tel: (514) 738-3000, Fax: (514) 737-5069 Internet: www.jam-ind.com/eriksonpro DS-SOLIDTUBE
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : Yes Modify Date : 2003:04:03 14:43:39-06:00 Create Date : 2003:04:03 14:43:27-06:00 Title : Data Sheets/tiffs Author : Lisa Roiseman Creator : QuarkXPressª 4.1: PSPrinter 8.3.1 Producer : Acrobat Distiller 4.05 for Macintosh Page Count : 2EXIF Metadata provided by EXIF.tools