AlarmForce PB7315 PANIC BUTTON User Manual PB 7 MANUAL

Download:
Mirror Download [FCC.gov]
Document ID	880102
Application ID	+GAsAJmaGABllhygwU2tCw==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	5.55kB (69423 bits)
Date Submitted	2007-12-15 00:00:00
Date Available	2007-12-15 00:00:00
Creation Date	2007-12-11 09:59:34
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2007-12-11 09:59:34
Document Title	Microsoft Word - PB-7 MANUAL.doc
Document Creator	PScript5.dll Version 5.2
Document Author:	Administrator

PB - 7
The Panic Button is used to activate the panic alarm.
PANIC BUTTON
Pressing this button once will trigger the panic alarm regardless
of whether the system is Armed or Disarmed.
TX INDICATOR
When the Red Panic button is pressed, the TX LED will flash to
indicate the PB-7 is transmitting a signal to the Control Panel.
Battery
The Panic Button uses one CR2032 Lithium battery as its power source. The battery is good for at least 5 years
before it needs changing.
PB-7 can also detect the low battery status. The low battery signal will be sent to the Control Panel along with
regular signal transmission for the Control Panel to display the status accordingly.
Getting Started
Remove the screw to separate the top cover from the base.
Insert the battery with negative of the battery on the spring side.
Place the top case over the base and tighten them with the screw.
Put the Control Panel into “Device +/-“ menu and then select “Add Device” menu.
Press any buttons on the PB-7.
Refer to the operation manual of your control panel under the section of “Device +/-“ to complete the
learn-in process.
Mounting the PB-7
There are two ways to mount the PB-7 by either Self-adhesive installation or Screw mounting.
Self adhesive installation
I. Clean the surface with a suitable degreaser.
II. Remove the protective covering from one side of the double-sided adhesive pad and firmly apply to
the back of the device.
III. Next remove the other cover and firmly press the item onto the desired location.
< NOTE >
Do not use the adhesive pad method of installation on a surface with peeling or cracked paint,
or on a rough surface.
Screw Mounting
The base has two knockouts, where the plastic is thinner for mounting purpose. To mount the PB-7:
I.
Remove the screw to separate the top cover from the base.
II. Break through the knockouts on the base.
III. Using the holes as a template, drill two holes and insert the wall plug.
IV. Screw the base into the wall plug.
V. Screw the top cover back on to its base
This device complies with Part 15 of the FCC rules and RSS-210 of CANADA. Operations is subject to the
following two conditions: (1)This device may not cause harmful interference, and (2)This device must accept
any interference received, including interference that may undesired operation.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2007:12:11 09:59:34+08:00
Create Date                     : 2007:12:11 09:59:34+08:00
Format                          : application/pdf
Title                           : Microsoft Word - PB-7 MANUAL.doc
Creator                         : Administrator
Document ID                     : uuid:623999f1-7231-4830-9e1f-0916d4e6609a
Instance ID                     : uuid:7bb5b165-7c7e-4924-b2e9-0566606f83dd
Page Count                      : 1
Author                          : Administrator

EXIF Metadata provided by EXIF.tools