AlarmForce RC7N315 Remote Controller User Manual
AlarmForce Industries Inc. Remote Controller Users Manual
Users Manual
Remote Controller (RC-7N) The Remote Controller is used to remotely arm or disarm the system, activate the panic alarm, and put the system in the "HOME" mode. Identifying the parts BUTTON Pressing this button will put the system into the Armed mode. BUTTON Pressing this button for 3 seconds will trigger the panic alarm regardless of whether the system is Armed, Disarmed or Home. BUTTON Pressing this button will put the system into the Home mode. BUTTON Pressing this button will put the system into the Disarmed mode. If the alarm is sounding, pressing this button will stop the alarm. TX INDICATOR BATTERY COMPARTMENT TX Indicator When any of these four buttons is pressed, TX LED will on. Please hold the button until the TX LED is off to indicate the Remote Controller has successfully sent out a signal to the Main Unit.On pressing of Panic button, the TX LED will first flash for three seconds then stay on to indicate a successful transmission. Battery The Remote Controller uses one “CR2032” 3V 230 mAh Lithium battery as its power source. Battery life is over 2 years in a normal domestic environment. Getting Started Remove the battery cover by using a coin to turn counter-clockwise. Insert the battery as shown in diagram, with unmarked side (negative) of the battery facing down. Replace the battery cover – secure the cover by using a coin to turn clockwise. This device complies with Part 15 of the FCC Rules and RSS-210 of Canada. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. FCC Caution : To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. (Example - use only shielded interface cables when connecting to computer or peripheral devices) 20070303
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No XMP Toolkit : 3.1-701 Producer : Acrobat Distiller 7.0 (Windows) Create Date : 2007:03:09 16:21:39+08:00 Creator Tool : PScript5.dll Version 5.2 Modify Date : 2007:03:09 16:21:39+08:00 Format : application/pdf Title : Microsoft Word - RC-7N 315M for Alarmforce 20070303.doc Creator : Jessica Document ID : uuid:7d97f257-2b49-45e6-a594-2609b8d12074 Instance ID : uuid:f95ddbe1-57cf-448e-855d-ad135cd06d68 Page Count : 1 Author : JessicaEXIF Metadata provided by EXIF.tools