Albatron Technology Dm 5952Kf Users Manual Xx52KF

dm5952kfdm6952kf 254f0503-3fe8-4ee0-95ea-f668fc79b152 Albatron Technology Computer Monitor DM-5952KF User Guide |

2015-02-05

: Albatron-Technology Albatron-Technology-Dm-5952Kf-Users-Manual-506226 albatron-technology-dm-5952kf-users-manual-506226 albatron-technology pdf

Open the PDF directly: View PDF .
Page Count: 20

Download
Open PDF In Browser	View PDF

USER MANUAL
High Definition Multimedia
Pure Flat Monitor
DM-5952KF / DM-6952KF

A73110002790

1. FCC STATEMENT
TABLE OF CONTENTS
1. FCC STATEMENT................................................................................. 1
2. SAFETY INSTRUCTIONS..................................................................... 2
3. README FIRST .................................................................................... 4
4. WITHOUT VISION CONVERTER ......................................................... 6
5. WITH【CT-1871】VISION CONVERTER ............................................ 7
6. WITH【CT-1890∕CT-1892】VISION CONVERTER.................................... 8
7. INSTALLATION ..................................................................................... 9
8. USING THE MONITOR ....................................................................... 12
9. Using the Remote Control ................................................................... 14
10. ACCESSING THE MAIN MENU........................................................ 18
11. ENERGY SAVING ............................................................................. 22
12. REAR CONNECTORS【CT-1871】................................................. 23
13. REAR CONNECTORS【CT-1890∕CT-1892】 ............................... 24
14. SIMPLE TROUBLE SHOOTING TIPS .............................................. 25
15. Model：DM-6952KF SPECIFICATIONS........................................... 26
16. Model：DM-5952KF SPECIFICATIONS........................................... 27
17. VGA CONNECTOR ASSIGNMENT .................................................. 28
18. RS-232 CONNECTOR ASSIGNMENT ............................................. 29
19. FACTORY PRESET AND COMPATIBLE MODE ............................. 30
20. IR REMOTE CONTROLLER CODE.................................................. 31
21. DM RS232 QUICK INSTALLATION .................................................. 32

This equipment has been tested and found to comply within regulations for a
Class B digital device, pursuant to Part 15 of the FCC rules. These regulations
are designed to provide protection against harmful interference in a residential
installation. This equipment can generate, use and radiate radio frequency
energy, and if not installed and∕or used in accordance with the instructions
provided, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures：
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver. Connect the
equipment into an outlet on a circuit different from that to which the receiver
is connected.
• Consult the dealer or an experienced radio∕TV technician for assistance.

Warning：
Only use shielded cable to connect I/O devices to this equipment.
Changes or modifications not expressly approved by the party responsible for
compliance could void your authority to operate this equipment.

3. Follow all warnings and instructions marked on the product.

12. Never push objects of any kind into this product through cabinet slots as
they may touch dangerous voltage points or short out parts that could
result in a frisk of fire or electric shock. Never spill liquid of any kind on
the product.
13. Do not attempt to service this product yourself, as opening or removing
covers may expose you to dangerous voltage points or other risks. Refer
all servicing to qualified service personnel.

4. Unplug this product from the wall outlet before cleaning. Do not use liquid
cleaners or aerosol cleaners. Use a damp cloth for cleaning.

14. Unplug this product from the wall outlet and refer servicing to qualified
service personnel under the following conditions:

2. SAFETY INSTRUCTIONS
1. Read all of these instructions.
2. Save these instructions for later use.

5. Do not use this product near water.

a. When the power cord or plug is damaged or frayed.

6. Do not place this product on an unsuitable cart, stand or table; the product
may fall causing damage or injury.

b. If liquid has been spilled into the product.

7. Slots and openings in the cabinet and the back or bottom are provided for
ventilation. To ensure reliable operation of the product and to protect it
from overheating, these openings must not be blocked or covered.
Placing the product on a bed, sofa, rug, or other similar surface should
never block the openings. This product should never be placed near or
over a radiator or heat register. This product should not be placed in a
built-in installation unless proper ventilation is provided.
8. This product should be operated from the type of power source indicated
on the marking label. If you are not sure what type of power available,
consult your dealer or local Power Company.

c. If the product has been exposed to rain or water.
d. If the product does not operate normally when the operating
instructions are followed. Adjust only those controls that are covered
by the operating instructions since improper adjustment of other
controls may result in damage and will often require extensive work by
a qualified technician to restore the product to normal operation.
e. If the product has been dropped or the cabinet has been damaged.
f. If the product exhibits a distinct change in performance, indicating a
need for service.

9. This equipment is to be electrically grounded. This product is equipped
with a three-wire plug with a third (grounding) pin. This plug will only fit
into a grounded AC outlet. This is a safety feature. If you are unable to
insert the plug into the outlet, contact a licensed electrician to replace the
outlet with a properly grounded outlet. Do not defeat the purpose of the
grounding plug!
10. Do not allow anything to rest on the power cord.
product where persons will walk on the cord.

Do not locate this

11. If an extension cord is used with this product, make sure that the total of
the ampere ratings on the products plugged into the extension cord does
not exceed the extension cord ampere rating. Make sure that the total of
all products plugged into the wall outlet does not exceed 15 amperes.

3. README FIRST

USING WITH A LAPTOP

These easy start-up tips will guide you in making the connections to get you
up and running.

If you are using Notebook；Press Fn. + F5 (or Fn. + F3) to output the display
to CRT only (CRT output combination key might be different on every
notebook), or press combination key again to show on both CRT and LCD
display.

USING WITH A DESKTOP PC OR LAPTOP
1. Prior to connecting the monitor, if you have a desktop monitor connected to
your PC, please insure that the video card refresh rate is set within the
Monitors frequency range by going to：
Start…Settings…Control
Panel…Display…Settings…Advanced…Adapter.
Set the Adapter refresh rate to 60Hz or “Adapter Default”. This applies to
the three supported resolutions of 640×480, 800×600 and 1024×768.
Otherwise, the monitor will not display and the unit will go into
standby mode (Yellow-orange LED).
2. Plug the AC power cord from the power source (outlet) to the AC input of
the monitor.
3. Connect the VGA cable provided from your computer’s VGA output to the
input on the monitor.

USING WITH A MAC
1. Plug the AC power cord from the power source (outlet) to the AC input of
our monitor.
2. Connect the MAC adapter to the MAC monitor output (if required the MAC
model). Refer to the adapter user’s manual for the proper dipswitch settings.
The optimum setting for the monitor is a resolution setting of 800ɰ600 and
a refresh rate of 60Hz. Make sure the display settings of the MAC is set to
800ɰ600 at 60Hz as well.
Note ： You need a MAC adapter when using the monitor with older MAC
Computers. The MAC adapter converts the output to VGA HD-15 pin
out. This adapter is available at an additional cost.
3. Connect the VGA cable from the monitor to the MAC adapter.

VGA 1 VGA 1 input port located in the rear of the monitor.
VGA 2 VGA 2 input port located in the front of the monitor.
Note：Be sure the PC is powered on before the monitor.
Press the VGA1∕VGA2 select button, located next to the front VGA
connector and on the Remote Control until the computer image is
displayed.

SIMULTANEOUS VIEWING OF THE MONITOR AND STANDARD PC
MONITORS
Connect the VGA cable from the PC’s VGA output to the VGA input. Then
plug the desktop monitor’s VGA cable to the monitor VGA output.

4. WITHOUT VISION CONVERTER

5. WITH【CT-1871】VISION CONVERTER
Note：Only for Rev.K-1 or higher.

FIGURE 1：DM-XX52KF W/O VISION CONVERTER CONNECTION

FIGURE 2：DM-XX52KF CONNECT WITH CT-1871 VISION CONVERTER

6. WITH【CT-1890∕CT-1892】VISION CONVERTER

7. INSTALLATION
Precautions

Note：Only for Rev.K-1 or higher.

Monitor shall be placed at least 6 inches away from the obstructer.
a. Monitor will work well when connect with computer and any high
definition receiver. With a high definition resolution, Monitor is designed
without video converter with it. To work as a TV or using with VCR and
DVD, you must to connect with a video converter.
b. The following descriptions are based on Monitor connected with video
converter ready. 【See Figure 2 ~ 3】

Television

FIGURE 3：DM-XX52KF CONNECT WITH CT-1890/CT-1892 VISION CONVERTER

1. Install cable from antenna or cable TV to the “F” connector labeled “ANT
IN”.
2. Press the Power ON, and the Red LED Indicator should be lit on the
monitor, and the monitor is on STAND BY mode.
3. Press the POWER button on the Remote-controller; the Red indicator
should turn into green.
4. Press TV∕PC∕AV button or press TV button on Remote-Controller
until the monitor displays MAIN NTSC TV.
5. To switch to TV∕CATV mode, select TV if you are using an antenna, or
select CATV if you have a cable service.
6. Press AUTO button with your remote control, and Monitor will now
preset all active channels into memory.
7. Selecting a channel.
a. Press CH▲∕▼to select channels on Remote control or on the front
panel.
b. Press the numeric key to select a desired channel.
8. Press VOL +∕VOL - to adjust the volume on remote control or the front
panel.

Video Recorder (VCR)
1. To connect the signal by F Connector, following the instruction to setup
your Television.
2. If using the Video (Composite) from the VCR, connect the Video input
with Left, and Right Speaker.
3. Start the VCR.
4. Using the Remote control press TV∕ PC ∕ AV button until or press
VIDEO button until VIDEO appears on the screen.
5. If using the S-Video output of the VCR. Connect an S cable from the
VCR to Monitor.

6. Connect the Left and the Right audio channel to monitor.
7. Start the VCR.
8. Press the TV∕PC∕AV button or press S-VHS button by remote control
until S-VHS appears on the screen.

DVD player
1. Connect the Video input with Left and Right speaker on DVD.
2. Start the DVD player.
3. Press the TV ∕ PC ∕ AV button or press VIDEO button by Remote
control until VIDEO appears on the screen.
4. If using the S-Video output of the DVD, connect an S cable from the
DVD with monitor.
5. Connect the Left with the Right audio channel.
6. Start the DVD player.
7. Press TV∕PC∕AV button or S-VHS button until appears on the screen.
8. If using the component output of the DVD, connect a component video
cable from the DVD with monitor.
9. Connect the left with the right audio channel.
10. Start the DVD player.
11. Using the Remote Control, press the TV ∕ PC ∕ AV button or the
Component button until Y, Cb, Cr∕Y, Pb, Pr appears on the screen.

High Definition Receiver
1. If your HD receiver has a VGA connector, it can be used to input monitor.
2. Connect a Receiver to the monitor using the VGA1 located on the rear
panel or VGA2 located on the front panel.
3. Connect the Audio to appropriate audio connectors next to the VGA
connector.
4. Using the Remote control, press the TV∕PC∕AV button or press VGA1
∕VGA2 button until VGA1∕VGA2 appears on the screen.
5. Press MENU, then press the right arrow key on the picture to adjust the
geometry controls for a good picture.
6. If using the component output of the DVD, connect an component video
cable from the DVD with monitor.
7. Connect the left with the right audio channel.
8. Start the DVD player.
9. Using the Remote Control, press the TV ∕ PC ∕ AV button or the
Component button until Y,Cb,Cr∕Y,Pb,Pr appears on the screen.

Computer
1. Connect the computer with the monitor by using VGA1 that located on
the rear panel, or VGA2 that located on the front panel.
2. Connect the Audio to the appropriate audio connector next to the VGA
connector.
3. Press the TV ∕ PC ∕ AV button or press VGA1 ∕ VGA2 button until
VGA1 ∕VGA2 appears on the screen.
4. If monitor has no display, check your video card on the appendix B.
5. If there is no display on the screen, verify if the proper input VGA1∕
VGA2 has been manually selected.

8. USING THE MONITOR
This section describes how to use and make adjustments to the monitor. It
also provides a reference to the control panel and the remote control.

POWER

(Toggle) Starts or stops the monitor function.

DEGAUSS

This is a dual function key:

(PC⁄TV⁄AV)

a. Switch the input source through TV∕PC∕VIDEO∕SVideo ∕COMPONENT∕TV while connect with a vision
converter.

Using the Control Panel
Using control panel to control the monitor instead of the remote control.
However, some other functions are not set on control panel. There are 7 panel
keys, and following lists the function buttons on the control panel:

b. Press this key to execute degaussing while in normal
status. Each degauss is lasting for 4 seconds, and
waiting for 5 minutes to re-do degauss.
MENU

(Toggle) Enables/Disables the on-screen display menu, or
return to the upper level menu in the menu mode.

SEL＋∕CH＋

This is a dual function key:

SEL－∕CH－

a. Press SEL＋∕－ to serve as menu item selection.
b. Press CH＋∕－ to adjust the channel.

DM-XX52KF VGA2 IN & PANEL KEYS

Note：

Indicators
a. Power LED shows power on∕off, and power saving status.
b. Stereo LED is lit when the TV programs being received.
c. SAP LED is lit when the program is broadcast in Sub-audio.(2nd audio
program)
Power LED
Stereo LED
SAP LED
Normal on
Green
Stereo On (Red)
Main Audio Off
Stand by
Amber
Mono Off
Sub Audio On (Yellow)
Red
Suspend∕Active off
Power off

Red

When you are adjusting a function under the magnitude bar, you may also
adjust other items in the same group by pressing the up∕down keys. Don’t
go back to the previous menu by way of the MENU key.
VOL＋∕－

This is a dual function key:
a. Press VOL＋ ∕－to control volume in any mode, except
in menu function.（optional）
b. Press VOL＋ ∕－to control the selection function while
in menu mode.

TV∕CATV
(VGA 1∕VGA2)

Select TV or CATV pair as inputs. While in the TV/CATV
mode; the VGA 1∕VGA 2 key serves as TV∕CATV key.

TABLE 1：INDICATOR OPERATION DESCRIPTION

Note ： Auto-switch function ： On VGA mode, upon POWER-ON, and at
POWER-ON only, the monitor will automatically switch to the other port
when NO signal appears after 8 seconds. On other words, VGA1 will
switch to VGA2, and vice versa. But if ports have NO input, this monitor
will switch back to the original default port.

9. Using the Remote Control
Using remote control instead of the control panel is convenient to operate the
monitor. Some of the keys must to work by connect with MATE, and these are
DISP, SLEEP, MTS, JUMP, ADD ∕ ERASE, AUTO, TV, VIDEO, S-VHS,
COMPONENT, TV∕PC∕AV, TV∕CATA, PIC-STD, PIC∕PAGE, PIC-SEL,
SYSTEM, FINE TUNING, CH-LOCK, FIELD, LANG, CAP∕TXT, CCD.

Note:
The mute function will automatically unlock if any adjusts are made related to
audio (i.e., volume, bass, etc.)
Following lists the function keys on the remote control:
POWER

Starts or stops the monitor function.

POWER ON∕OFF To Start or stop the multiple monitors function in the
meanwhile. In general, this function is used well with
multiple monitors’ control.

REMOTE CONTROL

DISP

Display the current mode on the present status.

SLEEP

To set the sleep timer, each press will increase the sleep
timer in 10-minute intervals up to 120 minutes (then back to
00). When the sleep count reaches the last 5 minutes, the
screen will show up every minute for 3 seconds. During the
last minute, and it will display every 10 seconds.

MTS

Multi-Sound selection.

MUTE

Cuts audio and turns audio back on.

JUMP

Returns to the previous channel.

ADD∕ERASE

Allows the user to Add∕Erase channels manually.

AUTO

Automatically scan all the channels by signal responds, and
to set them on the preset mode.

Enable/Disables the On-Screen Display Menu.

MIC∕SEL＋

This is a dual function key:

MIC∕SEL－

a. Press SEL ＋∕－ to serve as menu item selection.
b. MIC for R mode.

VOL＋∕－

This is a dual function key:
a. Press VOL ＋ ∕ － to control volume in any mode.
（optional）
b. Press VOL＋∕－ to control the selection function while in
menu mode.

Note：Volume control function will effect while connect with Vision Converter.
SET

Through DM RS232 V0.9 (Serial Transmission Communication
interface) to remote control the device. To identify the monitor, you
must to set an ID number (ID=1~99) to each of the monitor under
DM RS232 V0.9 Control page.

SYSTEM

Changes the video system on TV, Video, and S-VHS.
System types are PAL, PAL-M, PAN-N, and SECAM.

FINE TUNING

Allows for fine-tuning of channels.

CH-LOCK

For Parental Control.

FIELD

A FIELD 1 or FIELD 2 toggle. (Useable only when CCD is
on).

To set the ID number to control the monitor from the other.

Select TV source.

LANG

Language Selection (1 or 2).

VIDEO

Select VIDEO source.

CAP∕TXT

Accessible only when CCD is on.

S-VHS

Select S-VHS source.

CCD

Caption control.

Component

Select a Compound signal source:
Y,Pb,Pr —For High definition component inputs.(CT-1890).
Y,Cb,Cr—For Conventional component inputs.( CT-1890∕
CT-1892).

VGA 1

Select VGA 1 source.

VGA 2

Select VGA 2 source.

TV∕PC∕AV

Select TV∕PC∕VIDEO∕S-Video∕COMPONENT∕switch
source.

TV∕CATV

Select TV∕CATV source.

CH+∕CH-

Steps through the channels.

PIC-STD

Factory preset.

PIC∕PAGE ▲▼ Control and select items PIC-SEL button.
PIC-SEL

User video adjustment screens.

10. ACCESSING THE MAIN MENU

Following lists the function keys on the OSD:

Access the OSD Menu by control panel on the monitor or the remote control
to make the operation.

Note:

Screen-1

Screen-2

Screen-3

Press the Menu button on the control panel or the remote
control to display the main menu.
Press the SEL +/- buttons on the control panel or remote control
to scroll through the menu.
Press the VOL +/-buttons on the control panel or the remote
control to adjust the setting values.
Press Sub-menu to return to upper level while in any sub-menu.
To exit the menu mode, press the menu button while in the toplevel menu.

MAIN MENU
Screen-4

Screen-5

Screen-6

Picture Menu

Fine tunes the Picture image quality manually:
CONTRAST 、 BRIGHTNESS 、 H ∕ V SIZE 、 H ∕ V
POSITION、PINCUSHION、TRAPEZOID、TOP-CORNER、
BOTTOM-CORNER 、 PIN-BALANCE 、 PARALLELORGAM 、
ROTATION and RECALL.

Note：

Screen-7

Screen-8

Screen-9

a. Recall will replace current settings by the factory-preset values. You can
only recall factory settings when the PC mode is in one of the 14 predefined
modes. See Table 3 appendix B for preset modes. Color recall is used to
call back the factory setting of R.G.B.
b. Above parameters is for PC mode only, and can’t be reached in TV ∕AV
mode. In TV ∕ AV mode, you can adjust the TV parameters by remote
control.

OSD FUNCTION CHART

Color Menu

Select the color temperature to make colors more pure
and vivid. Select user item to adjust the color intensity
by VOL＋∕－key.

Audio Menu

Fine tune the audio functions manually:
Bass、Treble、Balance、Volume.

Special Menu

Fine tunes and sets the special functions manually:
ID-NUMBER （ 1~99 ） 、 INSTANT-ON 、 DEGAUSS 、
AUTO-SAVING 、 AUTO DEGAUSS 、 AUTO SHIFT 、
OSD BACKGROUND、OSD CONTRAST、AND OSD H
∕V-POSITION、MOIRE、 KEY LOCK、PASSWORD.

a. ID Number

Through DM RS232 V0.9 (Serial Transmission
Communication interface) to remote control the
device. To identify the monitor, you must to set an ID
number (ID=1~99) to each of the monitor under DM
RS232 V0.9 Control page.
1. Select the ID number (1~99) by tab.

g. Moiré

For some modes, it is better to switch the moiré off to get
better video performance, and this option is provided
when Moiré is ON, adjust MOIRE pops out, and adjust
moiré by using ＋∕－key. In TV∕AV mode, moiré can’t
be adjusted.

h. Key Lock

Enable∕Disable the front panel function operation.

i. Password

To release the disable front panel function operation by
set the password.

j. OSD
Background

Switch the OSD background ON or OFF to adapt to
different software background of the PC.

2. After you set the ID, choose high/light to identify the
monitor with has been set with a valid number. The
monitor will correspond with the current status, and this
could control the OSD function directly.
b. Instant-On

Enable∕Disable the INSTANT-ON. Set the INSTANT–
ON YES, the Monitor will start up immediately while the
Power switch on, and the green LED is lit on. The monitor
will stay in the saving mode till the power be turn-on again
while the INSTANT-ON is switch off, and the red LED is lit
on.

c. Auto Saving

The power will shut down automatically and be in the
power-saving status while the Auto Saving switch on.

e. Degauss

Enable∕Disable the AUTO DEGAUSS.
The AUTO DEGAUSS will be executed automatically by
every 24 hours since switch on the function.

f. Auto Shift

Active AUTO SHIFT to protect the screen from result in
the image-remain. The picture will be auto-shift once
every 6 hours.

11. ENERGY SAVING

12. REAR CONNECTORS【CT-1871】

All monitor is Energy Star compliant. It contains special hardware that
provides energy saving, automatic Stand By and Shut OFF features. After a
period of time, the monitor will be in power-saving status automatically until
the mouse or use the keyboard.
Automatic Stand By and Shut OFF are set through a software program
on your computer.

Model
DM-6952KF
DM-5952KF

MAX. Power on
200W
210W

Stand by
90W
90W

Suspend
5W
5W

POWER CONSUMPTION STATUS

Off
5W
5W

1. AC in
2. VGA out
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.

Video out
Audio out (Left)
Audio out (Right)
Video in
Audio in (Left)
Audio in (Right)
Audio in (Left)
Audio in (Right)
S-Video in
VGA1 in
Audio in
Antenna in
RS-232 In
RS-232 Out

Connect the power source to the monitor.
Video signal connector Output the signal to another
monitor.
Composite Video output to another device.
Left speaker signal to another device.
Right speaker signal to another device.
Composite from a VCR or DVD player
Composite, from a VCR or DVD player.
Composite, from a VCR or DVD player.
For S-Video signal.
For S-Video signal.
From a VCR or DVD player.
From Computer or HDTV receiver.
From Computer.
From antenna or cable TV.
Connect the external source from PC to the monitor.
Connect the external source From monitor to other
external source.

CT-1871 REAR CONNECTORS

13. REAR CONNECTORS【CT-1890∕CT-1892】
1. AC in
2. VGA out
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.

Video out
Audio out (Left)
Audio out (Right)
Video in
Audio in (Left)
Audio in (Right)
Audio in (Left)
Audio in (Right)
S-Video in
VGA1 in
Audio in
Antenna in
Y in

16. Pb∕Cb in
17. Pr∕Cr in
18.
19.
20.
21.

Audio in (Left)
Audio in (Right)
RS-232 In
RS-232 Out

Connect the power source to the monitor.
Video signal connector Output the signal to another
monitor.
Composite Video output to another device.
Left speaker signal to another device.
Right speaker signal to another device.
Composite from a VCR or DVD player
Composite, from a VCR or DVD player.
Composite, from a VCR or DVD player.
For S-Video signal.
For S-Video signal.
From a VCR or DVD player.
From Computer or HDTV receiver.
From Computer.
From antenna or cable TV.
Component Video Input, from a DVD player or HDTV
receiver.
Component Video Input from a DVD player or HDTV
receiver.
Component Video Input from a DVD player or HDTV
receiver.
For Component Video Signal.
For Component Video Signal.
Connect the external source from PC to the monitor.
Connect the external source From monitor to other
external source.

14. SIMPLE TROUBLE SHOOTING TIPS
In the rare occasion, you have might problem with your Monivision monitor,
please look at these simple troubleshooting steps to fix the problem.
PROBLEM
LED Not Lit
No Display on monitor

LED Red

Display Color Error
Discoloration

Other Problems
CT-1890/CT-1892 REAR CONNECTORS

TROUBLESHOOTING
Check your power cord connection.
A. PC/MAC：Check the resolution settings of the control
panel display settings in windows to make sure they are
set within the perimeters of our monitors. If you are using
a notebook computer with our monitor you need to
change the configuration of your notebook. The output
needs to be set to CRT.
B. Video：Check all of the video connections（RCA, SVideo）for proper connection.
C. Television ： Make sure the RF cable is connected
properly. Check to see if the monitor is programmed via
our auto programming function. The cable might need to
be set to the proper carrier；STD, HRC or IRC.
D. Notebook：If a notebook PC is used, make sure the
customer uses the control F function to make sure the
external monitor function is being used.
A. Check frequency and resolution settings.
B. Power down and re-power the monitor. Bypass ★ the
converter box, if there is one and plug the VGA signal
directly into the monitor.
★
BYPASS THE CT CONVERTER BOX TO MAKE SURE
THE PROBLEM IS WITH THE MONITOR.
Check the pins of the signal cable; Make sure the monitor is
plugged to the PC before the PC is booted up.
When operating the monitor, users may find out that putting
the monitor in different locations or switching directions
may render the screen’s display colors abnormal. It is
caused by the influence of the earth’s magnetic field. After
you push the “DEGAUSS” key, the colors should become
normal again.
If the display becomes abnormal due to an electrostatic
abnormal, turn the power off and wait for five seconds, then
turn the power on again and the monitor should function
normally.

15. Model：DM-6952KF SPECIFICATIONS
16. Model：DM-5952KF SPECIFICATIONS
CRT Size∕Type

32V Pure flat square screens with 104-degree
magnetic deflection, dynamic focus forming, and
75% transmission.

CRT Size∕Type

27V Pure flat square screens with 108-degree
magnetic deflection, dynamic focus forming, and
53.5% transmission.

Dot Pitch（mm）

0.9mm

Dot Pitch（mm）

0.68mm

Maximum Resolution

XGA；1024×768ȞNon-Interlacedȟ

Maximum Resolution

XGA；1024×768ȞNon-Interlacedȟ

Horizontal frequency

30 kHz to 52 kHz Auto Synchronous

Horizontal frequency

30 kHz to 52 kHz Auto Synchronous

Vertical frequency

50－120 Hz

Vertical frequency

50－120 Hz

Bandwidth

65 MHz

Bandwidth

65 MHz

Video input signal

Analog (0.7 Vp-p)

Video input signal

Analog (0.7 Vp-p)

VGA input∕output

15 PIN D-Sub

VGA input∕output

15 PIN D-Sub

RS-232 input/output

9 PIN D-Sub (Female/Male)

RS-232 input/output

9 PIN D-Sub (Female/Male)

Sync. input

Separate Sync. TTL Level Positive∕Negative
Composite Sync. TTL Level Positive∕Negative

Sync. input

Separate Sync. TTL Level Positive∕Negative
Composite Sync. TTL Level Positive∕Negative

Compatibility

VGA、SVGA、XGA、VESA.
DTV：480p、720p、1080i (Via VGA Input).

Compatibility

VGA、SVGA、XGA、VESA.
DTV：480p、720p、1080i . (Via VGA Input)

Speaker & Amplifier

15W×2

Speaker & Amplifier

15W×2

Keys

DEGAUSS（TV∕PC∕AV）、MENU、 SEL∕CH
＋、SEL∕CH－、VOL＋、VOL－、VGA1∕VGA2
（TV∕CATV）.

Keys

DEGAUSS（TV∕PC∕AV）、MENU、 SEL∕CH
＋、SEL∕CH－、VOL＋、VOL－、VGA1∕VGA2
（TV∕CATV）.

Connectors

AC IN, VGA IN, VGA OUT, Audio IN（R/L）,
RS232 IN, RS232 OUT.

Connectors

AC IN, VGA IN, VGA OUT, Audio IN（R/L）,
RS232 IN, RS232 OUT.

Power

AC 100V~240V Universal；200 W (Max).

Power

AC 100V~240V Universal；210 W (Max).

Power Factor

Up to 0.9

Power Factor

Up to 0.9

Display area (mm)

620×465（Factory Default）

Display area (mm)

520×390（Factory Default）

Dimension (mm)

865(W)×680(H)×565(D)

Dimension (mm)

750(W)×591(H)×504(D)

Net weight (kg)

70/78 Kg

Net weight (kg)

49.5Kg

Operating
Environment

T：

40°C

H：30 to 80 % RH

Operating
Environment

T：

35°C

H：30 to 80 % RH

Storage environment

T： －20 to＋60 °C

H：10 to 90 % RH

Storage environment

T： －20 to＋60 °C

H：10 to 90 % RH

5 to

17. VGA CONNECTOR ASSIGNMENT

18. RS-232 CONNECTOR ASSIGNMENT
1

---------------------------

Red

---------------------------

Green

---------------------------

Blue

---------------------------

Ground

---------------------------

No Connection

---------------------------

R-Ground

---------------------------

G-Ground

---------------------------

B-Ground

---------------------------

No Connection

---------------------------

Ground

---------------------------

Ground

---------------------------

SDA

---------------------------

H-sync

---------------------------

V-sync

---------------------------

SCL

Input Connector Assignment

1. ----------------------------------2. ----------------------------------3. ----------------------------------4. ----------------------------------5. ----------------------------------6. ----------------------------------7. ----------------------------------8. ----------------------------------9. -----------------------------------

No Connection
TXD
RXD
No Connection
No Connection
No Connection
Ground
No Connection
No Connection
5

1
9

OUT CONNECTOR ASSIGNMENT

No Connection
RXD
TXD
No Connection
No Connection
No Connection
Ground
No Connection
No Connection

19. FACTORY PRESET AND COMPATIBLE MODE
Mode Resolution H freq (kHz)

V freq (Hz)

H polarity

V polarity

Remarks

640×480

31.469

59.941

－

VGA

720×400

31.469

70.087

－

＋

VGA

640×350

31.469

70.087

＋

－

VGA

800×600

37.879

60.317

＋

VESA

800×600

48.077

72.188

＋

VESA

1024×768

48.363

60.004

－

VESA

480P

31.469

60.000

N/A

DTV

1080I

33.750

60.000

N/A

DTV

720P

45.000

60.000

N/A

DTV

800×600

35.150

56.250

＋

VESA

640×480

37.860

72.810

－

VESA

TABLE 3：FACTORY PRESENT

20. IR REMOTE CONTROLLER CODE
CODE
000H
001H
002H
005H
006H
007H
008H
00AH
00CH
00DH
00EH
00FH
010H
011H
012H
013H
014H
015H
016H
02CH

KEY
Display
CH-UP
CH-DOWN
AIR/CATV
SYSTEM
SLEEP
Quick View
AUTO search
ADD/ERASER
PC/TV/AV SW (& Y,Pb,Pr direct
key)
POWER on/off
MTS
Number key 0
Number key 1
Number key 2
Number key 3
Number key 4
Number key 5
Number key 6
ID

CODE
017H
018H
019H
035H
036H
037H
058H
059H
05AH
05BH

KEY
Number key 7
Number key 8
Number key 9
PIC STD
Fine Tuning UP
Fine Tuning DOWN
PIC SEL (& Parental control)
PIC UP (& Parental control)
PIC DOWN (& Parental control)
Parental control menu

09CH
09DH
09EH
09FH
0A0H
0A1H
034H
00BH
01AH
02FH

CCD
CCD CAP/TXT
CCD LANG
CCD FIELD
Power ON
Power OFF
TV direct key
VIDEO direct key
SVHS direct key
Y, Pb, Pr direct key

VIDEO CONVERTER CODE

CODE
01BH
01CH
01DH
01EH

KEY
VGA1 direct key
VGA2 direct key
MENU
SEL＋

CODE
01FH
003H
004H
009H
MONITOR KEY CODE

KEY
SEL－
VOL＋
VOL－
MUTE

21. DM RS232 QUICK INSTALLATION

Enjoy your new DM RS232 V0.9!
★ The

version mow is V0.9 and will
be updated in the future if
necessary.

Before install DM RS232 V0.9 software, you must to follow the steps
below:
1. Make sure the monitors and computer is turned OFF.
2. Connect the Monitor (COM1/COM2 port) with your computer by DM RS232
V0.9 cable.

Starting Setup
Turn ON the monitor, and turn ON the computer.
Before you can start Setup, the DM RS232 V0.9 software must be installed
and running on each computer with windows operation system.

Step 1:
Download the DM RS232 V0.9 driver on ALBATRON Website
(http://www.albatron.com.tw/images/product/ia/high_definition_monitor/softwar
e/rs232.zip).

Figure A:DM RS232 V0.9 CONTROL PAGE

START YOUR DM RS232 V0.9
Select Serial Port
Under DM RS232 V0.9 Control Page, Select COM1 on the Select Serial Port.

Step 2:
Extract Zip file to “RS232” sub-directory.

Step 3:

Note: The select serial will be set on COM1 automatically, and you will be
warning while the COM1 port has been selected by other interface
each time you enter.

Following the on-screen instructions.

Setting an ID number

Step 4:

Through DM RS232 V0.9 (Serial Transmission Communication interface)
to remote control the device. To identify the monitor, you must to set an ID
number (ID=1~99) to each of the monitor under DM RS232 V0.9 Control
page.

Installation is complete.

Step 5:
Press START and opening up DM RS232 V0.9 page under Program tools
group.
START PROGRAM DM RS232 V0.9 DM RS232 V0.9

1. Select the ID number (1~99) by tab.
2. After you set the ID, choose high/light to identify the monitor with has
been set with a valid number. The monitor will correspond with the
current status, and this could control the OSD function directly.

Select Mate Signal
1. Under Select Mate Signal to select a video signal to each monitor.
2. Wait for 2 seconds to switch the signal while change the Video signal.
The system will give you a warning message while an error operation.

Exit the Setting
Select the Exit tab to quit DM RS232 V0.9 Control page.
32

STATUS CONTROL
There are 6 control entries under status control, the following statements
are related to each Control function:（See Figure A）
While without setting ID, （ ID=NO ） the Power 、 VGA 、 Instant 、 AutoSaving、Auto- Degauss、Auto- Shift modes and select mate signal can be
controlled to ALL devices.
Power

VGA
Instant

Auto-Saving

Auto-Degauss
Auto-Shift

Background
Moiré

1. In general, select On to start the multi monitors’ functions by DM
RS232 V0.9 control.
2. Select Off and the power will be in the power-saving status
automatically.
Select VGA1/VGA2 tab to switch the signal source.
Enable/Disable the INSTANT-ON.
1. Set the INSTANT–ON YES, the Monitor will start up immediately
while the Power switch on, and the green LED is lit on.
2. The monitor will stay in the saving mode till the power is turn-on
again while the INSTANT-ON is switch off, and the red LED is lit
on.
Select Yes to shut down the power automatically while the current
mode without signal responds or detecting a over-frequency, and
the system will be in the power-saving status while the Auto Saving
switch on.
Enable/Disable the AUTO DEGAUSS.
1. Select Yes and the AUTO DEGAUSS will be executed
automatically by every 24 hours while switch on the function
Active AUTO SHIFT to protect the screen from result in the imageremain.
1. Select Yes to active Auto Shift, and the picture will be auto-shift
once for every 6 hours.
2. Select No to quit Auto Shift set
Switch ON/OFF the OSD background to adapt to different OSD
background.
In general, it is better to switch OFF the moiré to get better video
performance. For some mode, is provided when Moiré is ON, adjust
MOIRE pops out, and adjust moiré by using ＋/－key. In TV/AV
mode, moiré can’t be adjusted.

Audio Control:
There are 5 entries under Audio control to fine-tune the Audio Volume, Bass,
Treble, Balance.
1. Select the option button on the Audio frame
2. Move the H scroll bar to adjust the audio quality.
Bass

Control the sub-woofer volume by adjusts the H scroll bar.

Treble

Control the Treble volume by adjusts the H scroll bar.

Balance

To adjust volume output balance by adjusts the H scroll bar.

Volume

Control the volume by adjusts the H scroll bar.

Moire. Degauss Control:

Picture Control:

Select Moire. Degauss tab to adjust the H moire / V moire by drag the H scroll
in the scroll bar.

1. Select any label on the picture frame to adjust the picture quality。
2. To adjust the color contrasts by drag the Scroll Bar or input an applicable
value in each textbox on the control page.
3. Press Recall to restore the pre-set picture quality。

Color Control:
1. In the Color frame, select a direct label what you want to adjust to.
2. To adjust the color contrasts by drag the Scroll Bar on the Control page.
3. Press Recall 9300K∕6500K∕5500K/ TV to restore the pre-set the RGB
value of 9300K∕6500K∕5500K/ TV。

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : Yes
Create Date                     : 2003:08:15 13:50:32+08:00
Modify Date                     : 2003:08:15 13:50:32+08:00
Page Count                      : 20
Creation Date                   : 2003:08:15 05:50:32Z
Mod Date                        : 2003:08:15 05:50:32Z
Producer                        : Acrobat Distiller 5.0 (Windows)
Author                          : johnsontsai
Metadata Date                   : 2003:08:15 05:50:32Z
Creator                         : johnsontsai
Title                           : Microsoft Word - DM-xx52KF.doc

EXIF Metadata provided by EXIF.tools

Albatron Technology Dm 5952Kf Users Manual Xx52KF

dm5952kfdm6952kf 254f0503-3fe8-4ee0-95ea-f668fc79b152 Albatron Technology Computer Monitor DM-5952KF User Guide |

Navigation menu

Versions of this User Manual:

Views

Navigation