Alcatel Y800 Operating Instructions One Touch Y280 USER GUIDE

Y800 - Operating Instructions OT-y800-UM-ENG Free User Guide for Alcatel Mobile Phone, Manual - page7

: Alcatel Alcatel-Y800-Operating-Instructions-782292 alcatel-y800-operating-instructions-782292 alcatel pdf

Open the PDF directly: View PDF .
Page Count: 18

Download
Open PDF In Browser	View PDF

User Manual

1

Safety Precautions
Read the safety precautions carefully to ensure the correct and safe use of your
wireless device.
Do not switch on your device when the device use is prohibited or when
the device use may cause interference or danger.
Follow the rules or regulations in hospitals and health care facilities.
Switch off your device near medical apparatus.
Switch off your device in an aircraft. The device may cause interference
to control signals of the aircraft.
Switch off your device near high-precision electronic devices. The
device may affect the performance of these devices.
Do not attempt to disassemble your device or its accessories. Only
qualified personnel are allowed to service or repair the device.
Do not place your device or its accessories in containers with strong
electromagnetic field.
Do not place magnetic storage media near your device. Radiation from
the device may erase the information stored on them.
Do not put your device in a high-temperature place or use it in a place
with flammable gas such as a gas station.
Keep your device and its accessories away from children. Do not allow
children to use your device without guidance.
Use approved batteries and chargers only to avoid explosion.
Observe the laws or regulations on device use. Respect others’ privacy
and legal rights when using your device.

It is recommended that the equipment only be used in the environment where
temperature is between -10℃ and 50℃ and humidity is between 10% to 90%. Keep
the equipment in the environment where temperature is between -10℃ and 70℃ or
humidity is between 10% to 90%.

2

Content
Safety Precautions .................................................................................................. 2
1. ICON .................................................................................................................... 4
2. Quick Setup ......................................................................................................... 4
3. Connection .......................................................................................................... 4
3.1 Connection status ............................................................................................. 5
3.2 Profile management .......................................................................................... 5
3.3 Network .............................................................................................................. 6
3.4 PIN management ............................................................................................... 6
3.5 Connection Mode .............................................................................................. 7
4. SMS ...................................................................................................................... 7
5. Settings ................................................................................................................ 8
5.1 Wi-Fi ................................................................................................................... 8
5.2 WPS .................................................................................................................... 8
5.3 Router ................................................................................................................ 9
5.4 Language ........................................................................................................... 9
5.5 System ............................................................................................................. 10
6. Battery Charging ............................................................................................... 10
7. Warranty ............................................................................................................ 10
8. Q&A .................................................................................................................... 12
9. Warning and Precautions ................................................................................. 15

3

1. ICON
The icon description as bellow:

Category

Icon Display

Signal Strength

Connection
Status

SMS

From no signal to excellent

Disconnect

disable,

Connected

enable,

Battery

Wi-Fi status

SMS is full,

Unread

From lowest power to full power

Wi-Fi is active

2. Quick Setup
Admin Password:

Login Password: Set the password for login.
Wi-Fi settings:

SSID: Set the network name of this device.

Security: Configure the security mode for Wi-Fi connection.
Select an encryption mode in the list and set your password.
If you select "None", any Wi-Fi enabled device can connect to the device without
the password.
WEP: Lower security. Works with older Wi-Fi devices.
Recommended only if your devices don't support WPA or WPA2.
WPA: A strong security standard, supported by most Wi-Fi devices.
8 to 63 ASCII characters needed.
WPA2: A stronger, newer security standard. Limited to newer Wi-Fi devices.
8 to 63 ASCII characters needed.

3. Connection
You can move the mouse to "Connection" and click the items you want. In this section,
the following items are included:
4








Connection Status: current connection, WAN status, WLAN status;
Profile management: manage account settings, which includes your preferred
network connection as well as the Access Point Name (APN).
Network: choose and set up preferred network settings.
PIN management: manage PIN, enable/disable/change/verify;
Connection Mode: Set the dial mode of this device, default is Auto.

3.1 Connection status
Current status





Active profile: Select the profile you want to use from the drop down box.
Rate: current download speed from 4G/3G network;
Duration time: the duration for current connection;
Roaming: display whether you are in roaming network or not;

WAN status





IP address: this is the IP address arranged for this device.
Network name: the 4G/3G network you used;
SIM card status: No SIM card, invalid SIM card, PIN lock, PUK lock; SIM card
ready;
Network type: GPRS/EDGE/UMTS/HSDPA/HSUPA/HSPA+/LTE;

WLAN status




SSID: the network name of this device.
Security: the cipher type of the Wi-Fi used;
User: the users connected to this device and max capacity ;

3.2 Profile management
Add a new profile:
1, Click ;
2, Input the correct parameters you get from the operator;
Note: Profile Name/Number/APN is the mandatory to be filled.
3, Click ;
Edit a profile:
1, Select the profile from the connection profile list;
2, Change the parameters;
3, Click ;
5

Delete a profile:
1, Select the profile from the connection profile list;
2, Click ;
3, On the pop up dialog ”are you sure to delete this profile?”, click ;
Note: the default profile can not be deleted.
Set as default:
1, Select the profile from the connection profile list;
2, Click ;
3, On the pop up dialog ”are you sure to set this profile as default?”, click .
Note: Once set the profile as default,(D) will be added as a mark.

3.3 Network
 Network Mode:Automatic/4G only/3G only/2G only, default is automatic
 Network Selection: Automatic/Manual, default is automatic
Select a Network Manually
1,Choose Manual in the network selection;
2,Click ;
3,Click  to list the available network;
4,Choose the network and Click  to register;
Note: For the Services,4G(LTE),H+(HSPA+),H( HSUPA/HSDPA),3G(UMTS),
2G(Edge/GPRS);For the Status, Active( the network registered), Available( the
network can be used).

3.4 PIN management
Enable PIN
1, When PIN is disable, click , PIN input page is displayed;
2, Enter the PIN you want to set, only number is accepted;
3,Click ;
Disable PIN
1, When PIN is enable, click , PIN input page is displayed;
2,Enter the correct PIN;
3,Click ;
Change PIN
1, When PIN is enable, click ,PIN input page is displayed;
2,Enter the Old PIN/New PIN/Confirm PIN;
3,Click ;
Note: when you entered wrong PIN 3 times, PUK is needed, you can get this key from
the operator.
6

3.5 Connection Mode
Manual: The device dials to connect to Internet by clicking "Connect" button in the
connection page.
Auto: The device dials automatically to connect to Internet when user turn it on.
Default is Auto.

4. SMS
You can move the mouse to "SMS" and click the items you want. In this section, the
following items are included:

New: write the new SMS;

Read: list the SMS received;

Sent: list the SMS sent successfully.

Draft: save the SMS not sent or sent failed.

SMS settings: set the SMS center number and the SMS saved location ;

Read SMS
Left click the content of the SMS to read;
Sent SMS
1,Move the mouse to “SMS”;
2,Left click “Write SMS”;
3,Input the number and the content;
4,Click ;
Forward SMS
1,Left click the content of the SMS you want to forward;
2,Click ;
3,Input the number;
4,Click ;
Reply SMS
1,Left click the content of the SMS you want to reply;
2,Click ;
3,Input the content;
4,Click ;
Delete SMS
1,Left click the Mark of the SMS you want to delete;
2,Click ;
7

Delete all SMS
1,Click ;
2, Click ;
SMS settings
SMS Center Number: You can get it from your operator;
SMS Save Mode: the location SMS stored, default is SIM card;

5. Settings
You can move the mouse to "Settings" and click the items you want. In this section,
the following items are included:

Wi-Fi: set the parameters related to Wi-Fi;

WPS: set the method used for WPS;

Router: set the parameters related to router;

Language: set the language displayed on the web UI

System: display the device info, save & restore the configuration;

5.1 Wi-Fi
In this page, you can set the parameters of Wi-Fi.


802.11 Mode: selected the mode used, such as 802.11 b/802.11 g/802.11 n;



SSID: This is the name of Wi-Fi network, which was used to identify your Wi-Fi
network. The length of the SSID should be 1-32 characters including “_”.
SSID Broadcast: The default setting is “Enable”.
Wi-Fi Channel: Different domain has different channels (Channel 1~11 in FCC
(US)/IC (Canada); Channel 1~13 in ETSI (Europe); Channel 1~13 in MKK
(Japan)).
Max Number of Users: Set the maximum number of Wi-Fi users. The default and
maximum value is “10”.






5.2 WPS
WPS (Wi-Fi Protected Setup) provide a more intuitive way of wireless configuration
between your device and the wireless client. Please make sure that the client support
WPS.


PBC(Push Button Configuration):
1, Long press WPS button of this device until WPS show in the screen;
2, On the client (eg PC), select the Wi-Fi access utility which includes WPS
8

support (provided by PC vendor) and select the PBC.
3, Login web page(192.168.1.1),settings->WPS;
4, Enable PBC and click "

";

Note: If the WPS function start correctly, the info will display in the page as bellow:
"Succeeded!", Else displayed "Failed!" to indicate
the problem happened during the WPS setup.


PIN:
1, Long press WPS/Wake Up button of this device until WPS show in the screen;
2, On the client (eg PC), select the Wi-Fi access utility which includes WPS
support (provided by PC vendor) and select the PIN method, then a 8 digits
PIN code will be generated;
3, Login web page(192.168.1.1),settings->WPS;
4, Enable PIN and entered the 8 digits PIN code;
5, Click ;
Note: If the WPS function start correctly, the info will display in the page as bellow:
" Succeeded!", else displayed" Failed!" to indicate the problem happened during the
WPS setup.

5.3 Router
DHCP:








Router IP Address: The router's IP address on the LAN. The default setting is
“192.168.1.1”.
Subnet Mask: The router's internal LAN subnet mask. The default setting is
“255.255.255.0”.
Host Name: Name of web server.
DHCP Server: DHCP Server will automatically assign IP addresses to devices on
the network. The default setting is “Enable”.
DHCP IP Pool: Set a range of IP addresses available to access.
DHCP Lease Time: Amount of time that a Wi-Fi enabled device can use its
assigned IP address before it is required to renew the lease.

MAC Filtering:
MAC filtering is used to control specific MAC addresses to access.
 Select “Disable" : All terminal devices are allowed to access the network.
 Select “Enable": Only devices in this list are allowed to access the network.
You can add, edit or delete the configuration.
Note: The maximum allowed MAC list is 10.

5.4 Language
Change language:
1,Choose the language,

;
9

2, Click .
The default language is English.

5.5 System
Reboot
Click  to restart the device.
Reset
Reset the device to the original factory settings. you can also use the hardware reset
button under the back cover, marked with R.
Save the configuration
1,Click ;
2,Select the location to save current settings.
Restore the configuration
1,Click ;
2,Select a file saved previously to restore the settings.

6. Battery Charging
There are two types of charging, one is via Main charger, the other is via PC USB
cable.
Charging rates depend on whether the device is connected to the 4G/3G network ,
whether the Wi-Fi is transmitting, and whether the device is connected to the mains
charger or to a PC. And the mains charger is recommended as the main charging.
Main charger:
When power off, it will take a maximum of 3 hours.
PC USB Cable:
When power off, it will take a maximum of 4 hours.
Note: In order to protect the battery, when low power
charging;

7. Warranty

10

is indicated, please do



The device is warranted against any deviation from technical specifications for a
period of twelve (12) months from the date specified on your original invoice1.



Under the terms of this warranty, you must immediately inform your vendor in
case of a conformity defect on this device, and present a proof of purchase.



The vendor or repair center will decide whether to replace or repair this device, as
appropriate.



Repaired or replaced this device are warranted ONE (1) month unless there are
statutory provisions to the contrary.



This warranty shall not apply to damage or defects to this device due to:

1)

Not following the instructions for use or installation,

2)

Not being compliant with technical and safety standards applicable in the
geographical area where this device is used,

3)

Improper maintenance of sources of energy, and of the overall electric
installation,

4)

Accidents or consequences of theft of the vehicle in which this device is
transported, acts of vandalism, lightning, fire, humidity, infiltration of liquids,
inclement weather,

5)

Connecting to or integrating into this device any equipment not supplied or not
recommended by the manufacturer,

6)

Any servicing, modification or repair performed by individuals not authorised by
the manufacturer, the vendor or the approved maintenance centre,

7)

Use of this device for a purpose other than that for which it was designed,

8)

Malfunctions caused by external causes (e.g., radio interference from other
equipment, power voltage fluctuations),

9)

Faulty connections resulting from unsatisfactory radio transmission or caused by
the absence of radio relay coverage.



Warranty is also excluded for this device on which markings or serial numbers
have been removed or altered.

1 The mandatory warranty period may vary if overriding statutory provisions are applicable in
your jurisdiction.
11



This device is also warranted against hidden defects (defects inherent in the
design, manufacture, etc.).



There are no other express warranties than this printed limited warranty,
expressed or implied, of any nature whatsoever.



In no event shall the manufacturer be liable for incidental or consequential
damages of any nature whatsoever, including but not limited to trading loss,
commercial loss, to the full extent those damages can be disclaimed by law. Some
countries/states do not allow the exclusion or limitation of incidental or
consequential damages, or limitation of the duration of implied warranties, so the
preceding limitations or exclusions may not apply to you.

8. Q&A
1. Q: Which browser does the device support?
A: It supports Firefox, Safari 4.0.2----5. 2,IE 7.0----10.0,Opera; Chrome;
2. Q: Which OS does the device support?
A: It supports windows Xp/Vista/7/8; Mac OS X10.5----10.8;
3. Q: How to connect to the device?
A: Open your wireless network connection list and select the relative SSID.
Windows: Right-click Wireless network connection on the task bar,
and select View Available Networks.
Mac:

Pull down list from AirPort icon.
Select the SSID from the dropdown menu.

iOS: Settings->Wi-Fi. Choose the SSID from the available Networks.
Android: Settings->Wireless controls->Wi-Fi settings. Choose SSID from the
available Networks.
4. Q: How to do if I see the SSID but failed to connect?
A:

<1, Check the password you entered is the right one;
<2, Touch any key to light the screen to check the Wi-Fi
users connected, the maximum users permitted is 10

.

<3, Check if WPS security enabled on your PC? If so, check the device
12

to see if it is expecting a WPS action from your PC.
5. Q: How to do if No service displayed on the screen?
A: the possible reason are listed as bellow:
<1. Unstable local signal.
<2. Hardware problem.
You may:
<1. If you are inside a building or near a structure that may be blocking
the signal, change the position or location of the device. For example,
try moving the device close to a window.
<2. Check the hardware or use another device and retry.
<3. Check the device Status Display for error messages or information.
6. Q: How to do if I forgot Wi-Fi Key?
A: You can reset the device to factory defaults by long press the master
reset button, marked with RESET.
7.

Q: Why the SSID does not appear in the wireless network list?
A: you can check the device as the suggestion bellow:
●Check the device Status Display for error messages or information.
●Refresh your network list on your computer.
Windows: Click Refresh Network List on the left side of the Wireless
Network Connection screen.
If that does not work you can try the following:
<1. Open Network Connections.
<2. Right-click Wireless Network Connection and select Properties.
<3. Click the Wireless Networks tab.
<4. Delete any unused wireless connections from the Preferred Networks list
and click OK.
<5. Restart your computer.
Mac: Try rebooting your computer

8.

Q: How to do if “No SIM” or “SIM invalid” displayed on the screen?
A: the possible reason as bellow:
<1,There is no SIM card inserted or inserted incorrectly.
13

<2,The SIM card is de-activated.
You may:
<1,Pull out and re-insert the SIM card. Be careful not to touch the contact
points when handling the SIM card.
<2,Contact your operator for advice
9.

Q: How to do if “PIN lock” or “PUK lock” displayed on Screen?
A: The SIM card is locked. Login Web page and Enter your PIN code or
PUK code you got from the operator.
Note: if you entered wrong PIN 3 times, then PUK is needed,
and if the wrong PUK entered 10 times, the SIM card will be locked forever.

10. Q: How to find out the network technology and provider currently in use?
A: <1,Touch “WPS” to light the screen,
: EDGE/GPRS

: UMTS

:HSDPA/HSUPA

:HSPA+

:LTE

<2,Login web browser, go to Connection->Connection Status
11. Q: How to connect to the 4G/3G network?
A: Login the web browser, go to Connection->Connection status, click
"Connect"
12. Q: How to disconnect from the 4G/3G network?
A: Login the web browser, go to Connection->Connection status,
click "Disconnect"
13. Q: How to set a new PIN for my SIM card?
A: Login web browser, Go to Connection->PIN Code Management
14. Q: Where can I find information about Internet connectivity and Wi-Fi setup?
A: Login web browser, Go to Connection->Connection status
15. Q: How to check the volume and time i used before?
A:Login web browser, Go to Connection-> Connection status ->Usage
History
14

16. Q: How to search the network manually?
A: Login web browser, Go to Connection->Network, choose manual for
network selection, click ,then click .
17. Q: How to check the model number and firmware versions of my device?
A: Login web browser, go to Settings->System->Device information
18. Q: Can I backup and restore my configuration settings?
A: Login web browser, go to Settings->System, click "Backup"
to backup and "Restore" to restore.
19. Q: How to set the device dials to connect internet automatically

when turn on the device?
A: login web browser, and go to Connection->Connection mode->AUTO
20. Q: How to change the SSID?
A: login web browser, and go to Quick setup->Wi-Fi settings->SSID
21. Q: How to change the login password?
A: login web browser, and go to Quick setup->admin password->login
password
22. Q: How to change the Wi-Fi Key?
A: login web UI, and go to Quick setup-> Wi-Fi setting->Security

9. Warning and Precautions
Electronic Device
Turn off your device near high-precision electronic devices. The wireless device may
affect the performance of these devices. Such devices include hearing aids,
pacemakers, fire alarm system, automatic gates, and other automatic devices can be
affected. If you are using an electronic medical device, consult the device
manufacturer to confirm whether the radio wave affects the operation of this device.
15

Hospital
Pay attention to the following points in hospitals or health care facilities:


Do not take your wireless device into the operating room, intensive care unit, or
coronary care unit.



Do not use your wireless device at places for medical treatment where wireless
device use is prohibited.

Storage Environment


Do not place magnetic storage media such as magnetic cards and floppy disks
near the wireless device. Radiation from the wireless device may erase the
information stored on them.



Do not put your wireless device and other accessories in containers with strong
magnetic field, such as an induction cooker and a microwave oven. Otherwise,
circuit failure, fire, or explosion may occur.



Do not leave your wireless device in a very hot or cold place. Otherwise,
malfunction of the products, fire, or explosion may occur.



Do not subject your wireless device to serious collision or shock. Otherwise,
wireless device malfunction, overheat, fire, or explosion may occur.

Children Safety


Put your wireless device in places beyond the reach of children. Do not allow
children to use the wireless device without guidance.



Do not allow children to put the device in mouth.



Do not allow children to touch the small fittings. Otherwise, suffocation or gullet
jam can be caused if children swallow the small fittings.

Operating Environment


The wireless device is not water-resistant. Keep it dry. Protect the wireless device
from water or vapor. Do not touch the wireless device with a wet hand. Otherwise,
short-circuit and malfunction of the product or electric shock may occur.



Do not use the wireless device in dusty, damp and dirty places or places with
magnetic field. Otherwise, malfunction of the circuit may occur.



On a thunder stormy day, do not use your wireless device outdoors.



The wireless device may interfere with nearby TV sets, radio and PCs.



In accordance with international standards for radio frequency and radiation, use
wireless device accessories approved by the manufacturer only.

Traffic Safety
When driving, do not use the device.
16

When

switched on, this device emits electromagnetic waves that

can interfere with the vehicle’s electronic systems such as ABS anti-lock brakes
or airbags. To ensure that there is no problem, do not place this device
on top of the dashboard or within an airbag deployment area.
Check

with your car dealer or the car manufacturer to make sure that the

dashboard is adequately shielded from this device RF energy.
Conditions of Use:
Switch

this device off before boarding an aircraft.

Switch

this device off when you are in health care facilities, except in

designated areas. As with many other types of equipment now in regular use,
this device can interfere with other electrical or electronic devices,
or equipment-using radio frequencies.
Switch

this device off when you are near gas or flammable liquids. Strictly

obey all signs and instructions posted in a fuel depot, petrol station, chemical plant,
or in any potentially explosive atmosphere.
When

this device is switched on, it should be kept at least 15 cm from any

medical device such as a pacemaker, a hearing aid or insulin pump, etc.
Do

not let children use this device without supervision.

When

replacing the cover, please note that this device may contain

substances that could create an allergic reaction.
Always

handle this device with care and keep it in a clean and dust-free place.

Do

not open, dismantle or attempt to repair this device yourself.

Do

not drop, throw or bend this device.

Do

not paint it.
17

Collection Point:
This symbol on this device means that these products must be taken to
collection points at the end of their life:
Municipal waste disposal centers with specific bins for these items of equipment.
Collection bins at points of sale.
They will then be recycled, so that their components can be reused, and to prevent
substances being disposed of in the environment.
In European Union countries:
These collection points are accessible free of charge.
All products with this symbol must be brought to these collection points.
In non-European Union jurisdictions:
Items of equipment with this symbol are not to be thrown into ordinary bins if your
jurisdiction or your region has suitable recycling and collection facilities; instead they
are to be taken to collection points for recycling. In the United States, please visit
www.recyclewirelessphones.org for more information on recycling wireless products.
Protection against theft
This device is identified by an IMEI (modem serial number) shown on
the packaging label. We recommend that you note the number the first time
you use your this device by login web browser and go to "Settings" ->
"System" to get it.

18


Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 18
Language                        : zh-CN
Tagged PDF                      : Yes
Title                           : One Touch Y280 USER GUIDE
Author                          : chenyi2
Creator                         : Microsoft® Word 2010
Create Date                     : 2013:08:14 16:19:33+08:00
Modify Date                     : 2013:08:14 16:19:33+08:00
Producer                        : Microsoft® Word 2010

EXIF Metadata provided by EXIF.tools








				
				

							
		
		

			
Navigation menu