Alco Electronics RTS7010B Soundbar with Bluetooth User Manual

Alco Electronics Ltd Soundbar with Bluetooth

user manual

Home Theater Sound BarRTS7010BUser ManualSafety PrecautionsIt is important to read this user manual prior to using your new product for the first time.Remote ControlAccessoriesRemote control (with 2 x AAA batteries) ..........................................................................x 1AC power adapter .....................................................................................................................x 1Wall Mount Bracket (with screws x 4).................................................................................x 2Please locate the included accessories.To  order  replacement  units,  visit  http://www.RCAav.comLocation of ControlsPlacementConnectionsBasic OperationBluetooth PairingAVC MULTIMEDIA (“AVC”) makes the following limited warranty.  This limited warranty extend to the original consumer purchaser and is limited to non-commercial use of the product.One Year Parts & Labor WarrantyAVC products purchased in the United States are warranted to be free from defects in materials or workmanship for a period of one year from the date of their original retail purchase. If the unit fails to conform to this warranty, we will service the product using new or refurbished parts and products, at AVC’s sole discretion.During a period of one year from the effective warranty date, AVC will provide, when needed, service labor to repair a manufacturing defect at its designated Service Center. To obtain warranty service in the United States, you must first call our Customer Support Center at 1-800-506-5746 or 1-877-252-6873, during the hours listed in the box below. The determination of service will be made by AVC Customer Support. PLEASE DO NOT RETURN YOUR UNIT TO AVC WITHOUT PRIOR AUTHORIZATION.  New or remanufactured replacements for defective parts or products will be used for repairs by AVC at its designated Service Center for one year from the effective warranty date. Such replacement parts or products are warranted for an additional one year from the date of repair or replacement.  The Customer will be required to ship the unit to the Service Center indicated at the time Customer Support is contacted to make the necessary repairs.  The customer is responsible for all transportation charges to the service facility. Packaging and Shipping InstructionWhen you send the product to the AVC service facility you must use the original carton box and packing material or an equivalent as designated by AVC.LIMITED WARRANTYYour Responsibility(1) You must retain the original sale receipt to provide proof of purchase.(2) These warranties are effective only if the product is purchased and operated in the U.S.A. or Canada.(3) Warranties extend only to defects in material or workmanship, and do not extend to any product or parts which have been lost or discarded, or damage to product or parts caused by misuse, accident, improper operation or maintenance, or use in violation of instructions provided with the product, or to product which has been altered or modified without authorization of AVC, or to products or parts thereof which have had the serial number removed or changed.Out of WarrantyIn the event your product requires repair after the limited warranty period has expired, please contact our Customer Support Center at 1-800-506-5746, 1-877-252-6873 or www.RCAav.com Hours:  Monday–Thursday: 9am–7pm, Friday: 9am–5pm, Saturday: 9am–NOON Eastern time.Important:  You are responsible for any transportation, shipping or insurance relative to the return of product to our Product Returns CenteAll warranties implied by state law, including the implied warranties of merchantability and fitness for a particular purpose, are expressly limited to the duration of the limited warranties set forth above. With the exception of any warranties implied by state law as hereby limited, the foregoing warranty is exclusive and in lieu of all other warranties, guarantees, agreements and similar obligations of manufacturer or seller with respect to the repair or replacement of any parts. In no event shall AVC be liable for consequential or incidental damages.No person, agent, distributor, dealer or company is authorized to change, modify or extend the terms of these warranties in any manner whatsoever. The time within action must be commenced to enforce any obligation of AVC arising under the warranty or under any statute, or law of the United States or any state thereof, is hereby limited to one year from the date of purchase. This limitation does not apply to implied warranties arising under state law.This warranty gives you specific legal rights and you may also have other rights, which may vary, from state to state. Some states do not allow limitation on how long an implied warranty lasts, when an action may be brought, or the exclusion or limitation of incidental or consequential damages, so the above provisions may not apply to you.For more information on other products and services, please visit our web site at www.RCAav.com.Important: Also keep your “Bill of Sale” as proof of purchase.Serial no ................................................................... Invoice no ..................................................................................Date purchased ..................................................... Dealer name .............................................................................FOR SERVICE AND REPAIR, PLEASE VISIT www.RCAav.comCaution:• We recommend that Wall-mountingbe carried out by a professional. The wall mount bracket “key-holes” are intended for use with #8 (Imperial) or M4 (Metric) with head size: Diameter 7.5 - 9.4 mm. Additional or alternative parts may be needed for certain types of wall constructions.• Make sure that the wall-mount isfixed securely enough so that it meets safety standards.• Allowatleast2”(5cm)separationinalldirections between the Sound Bar and other AV equipment (such as your TV or Set-Top Box).• It is recommended that all cables(AC adapter and Audio cables) be connected to the Sound Bar before placing it on the wall.Specifications and external appearance are subject to change without notice.Need more help?Please visit online help at www.RCAav.comTroubleshootingLimited WarrantyPower SupplyUSING THE AC ADAPTERUsing an AC adapter other than the one supplied with the unit may damage the unit.Caution:• Before use, ensure the rated voltageof the adapter matches your local voltage.• The included AC adapter is for usewith this unit only. Do not use it with other equipment.• If you are not going to use the unitfor a long time, disconnect the AC adapter from the wall outlet.• WhenevertheACadapteris pluggedin to a wall outlet, the AC adapter will draw some power, even when the Sound Bar is turned off.Printed in ChinaThe Soundbar can be placed freestanding on a table or mounted on a wall. PLACING THE SOUNDBAR ON A WALLThe Soundbar requires additional mounting hardware that must be purchased separately.1.  Install the Wall Mount Brackets to the Soundbar as shown below.2.  Place the Wall Mount Template (included) on the wall and then mark the locations of the screw holes.3.  Drill the screws (not supplied) into the wall carefully.4.  Gently hang the Soundbar onto the screws in the wall.Note: Allow 2mm space between screw and thewall for fitting the wall mount bracket.USING THE REMOTE CONTROL• Point the remote control at theREMOTE SENSOR located on the unit (see Front Panel illustration for precise location).• When there is a strong ambient lightsource, the perform ance of the infrared REMOTE SENSOR may be degraded, causing unreliable operation.• The recommended effective distancefor remote operation is about 16 feet (5 meters).TO CHANGE REMOTE BATTERIES1.  Open the battery door.2.  Insert two AAA batteries.BATTERY REPLACEMENTWhen the batteries become weak, the operating distance of the remote control is greatly reduced and you will need to replace them.Notes:  • If the remote control is not going tobe used for a long time, remove the batteries to avoid corrosion damage caused by battery leakage.• Donotmixoldandnewbatteries.Donot mix ALKALINE, standard (CARBON-ZINC) or rechargeable (NICKEL-CADMIUM) batteries.• Always remove batteries as soon asthey become weak.• Weak batteries can leak and severelydamage the remote control.• WARNING:Donotdisposeofbatteriesin a fire. batteries may explode or leak.CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.FCC INFORMATIONThis device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:(1)This device may not cause harmful interference, and (2)This device must accept any interference received, including interference that may cause undesired operation.NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receivingantenna.• Increase the separation between theequipment and receiver.• Connecttheequipmentintoanoutleton a circuit different from that to which the receiver is connected.• Consult the dealer or an experiencedradio/TV technician for help.WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FOR CUSTOMERS IN CANADAThis apparatus complies with the Class B limits for radio noise emission set out in radio interference regulations.CAN ICES-3 (B) / NMB-3 (B)Warning:• The AC adapter is used as disconnectdevice and it should remain readily operable during intended used. In order to disconnect the unit from the mains completely, the AC adapter should be disconnected from the mains socket outlet completely.• The AC adapter of unit should notbe obstructed OR should be easily accessed during intended use.• Minimum 10 cm (4 inches) distancesaround the unit for sufficient ventilations.• Theventilationshouldnotbeimpededby covering the ventilation openings with items such as newspaper, table-cloths, curtains, etc.• Nonakedamesourcessuchaslightedcandles should be placed on the unit.ON SAFETY• Should any objects or liquids fall intothe unit, disconnect the power supply and have the unit checked by qualified personnel before any further operation.• The unit shall not be exposed todripping or splashing and that no objects filled with liquid, such as vases, shall be placed on the unit.ON USENever use the unit where it would be subject to:-  Heat sources such as radiators or air ducts.-  Direct sunlight.1.   MUTE button2. BLUETOOTH  button3. VOL   /   button  /   /   button4.  AUX button5. BASS   /   button6.   button7.  LINE IN button8.  OPTICAL button9. TREBLE   /   button10 SOURCE   /   buttonREMOTE CONTROL1.   Standby/ON button2. SOURCE   button3. BLUETOOTH   / LEVEL indicator4.  AUX IN / LEVEL indicator5.  OPTICAL IN / LEVEL indicator6.  LINE IN / LEVEL indicator7.   /    VOLUME button8.  DC IN jack9.   AUX IN R / L jack10.  LINE IN 3.5mm jack11.  OPTICAL IN jack12.  Remote SensorPlug one end of a 3.5mm Audio Cable into the LINE IN jack and other end into your iPad®, iPhone®, iPod® or other audio devices.Before Bluetooth pairing, you should turn on the Bluetooth function of your other device (such as, mobile phone with Bluetooth function).1.   Press SOURCE button on the unit or   button on the remote control to select BT (Bluetooth) mode.  The Bluetooth indicator light on the soundbar will blink.2.  On your device (mobile phone, MP3 player, etc.), select RCA RTS7010B from the list of available Bluetooth connections.    Note: If your Bluetooth device (such as, mobile phone) requires a password while pairing, please enter 4-digit number: 0000.•IftheBluetoothpairingissuccessful,the Bluetooth indicator will illuminate.• If the Bluetooth pairing isunsuccessful, the Bluetooth indicator will blink at slow speed.  Please try again.TO DISCONNECT THE CURRENTLY PAIRED DEVICE1. On your currently paired and connected device, select RCA RTS7010B  from the list and disconnect it.or2.  turn off the connected device.ENJOY THE MUSIC THROUGH BLUETOOTH• Press  to begin or pause playback• Press  /   to select a specific track• Press and hold   /   to start moving backward/forward at high speed.1. Press   STANDBY/ON button on the Soundbar or   button on the remote to turn on the unit.2.  Press SOURCE   /   on the remote to select AUX IN, OPTICAL IN, LINE IN or Bluetooth source (input).  The LEDs located on top of Sound Bar will indicate the currently-selected source.3.  Press VOLUME   /   , BASS   /   or TREBLE  /   on the remote to adjust Volume, Bass or Treble levels.  When adjusting Volume, Bass or Treble, the four LEDs will temporarily display the current level setting (see illustration).Note:Whenmuteisenabled,the4LEDindicatorswillash.PresstheMUTEbuttonontheremotecontroltodisablethemutefunctionandLEDashingstop.SOLUTIONS• Makesureitispluggedin.• Press  STANDBY/ON button to turn on the Sound Bar.• PresstheVOLUME   /    button on the top of the Sound Bar or VOL   /    button on the remote.• Ensure the source you’ve selected is outputting audio.  If you’reusing “audio out” from your TV, ensure your TV is configured to output audio (see TV’s menu settings).• EnsureyourAVconnectionsareproperlymade(ensureyoudon’thave any loose connections).• Ensure you’ve selected the correct source (input) -  the LEDslocated on the top of the Sound Bar will indicate the currently-selected source (input).• Muteisactivated(the4LEDsontopoftheSoundBarashes).Pressthe mute button on the remote control.• EnsuretheinputsourceisselectedPCMoutputonthesetupmenuof the input device.• Reset the bluetooth connection by turning off and on yourconnectind device, or this Sound Bar, or select other SOURCE on this Soundbar then back to BT mode again.• Ifbatteryisweak,pleasereplacethebatteryandensurethenewbattery is installed correctly. • Pleaseensurethereisnothingblockingtheremotesensoronthefront of the Sound Bar.PROBLEMSThe unit does not switch on.I have no sound.Cannot setup Bluetooth pairingThe remote control doesn’t workCONNECT AUDIO THROUGH AN ANALOG AUDIO CABLEConnect an Audio Cable:1. from the AUX IN jacks to the Headphone Out jack of your TV, Set-Top Box or Blu-ray/DVD Player.2. from the LINE IN jack to the AUDIO OUT jacks of your TV, Set-Top Box or Blu-ray/DVD Player.CONNECT AUDIO THROUGH A DIGITAL OPTICAL CABLE3.  Connect an Optical Cable from the OPTICAL IN jack to the OPTICAL OUT jack of your TV, Set-Top Box or Blu-ray/DVD Player.Note: OPTICAL IN only supports PCM signal. You may need to activate PCM (Downmix) on your source device, e.g. TV, Set-Top Box or Blu-ray/DVD Player.

Navigation menu