Alco Electronics RTS7220B2 Home Theater Sound Bar User Manual

Alco Electronics Ltd Home Theater Sound Bar

User Manual

Home Theater Sound BarRTS7220B-2User ManualIt is important to read this user manual prior to using your new product for the first time.FCC INFORMATIONThis device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:• Reorientorrelocatethereceivingantenna.• Increasetheseparationbetweentheequipmentandreceiver.• Connecttheequipmentintoanoutletonacircuitdifferentfromthattowhichthe receiver is connected.• Consultthedealeroranexperiencedradio/TVtechnicianforhelp.WARNING:Changesormodicationstothisunitnotexpresslyapprovedbythe party responsible for compliance could void the user’s authority to operate the equipment. FOR CUSTOMERS IN CANADAThis apparatus complies with the Class B limits for radio noise emission set out in radio interference regulations.CANICES-3(B)/NMB-3(B)Warning:• TheACadapterisusedasdisconnectdeviceanditshouldremainreadilyoperable during intended used. In order to disconnect the unit from the mains completely, the AC adapter should be disconnected from the mains socket outlet completely.• The AC adapter of unit should not be obstructed OR should be easilyaccessed during intended use.• Minimum 10 cm (4 inches) distances around the unit for sufcientventilations.• Theventilationshouldnotbeimpededbycoveringtheventilationopeningswith items such as newspaper, table-cloths, curtains, etc.• Nonakedamesourcessuchaslightedcandlesshouldbeplacedontheunit.ON SAFETY• Shouldanyobjectsorliquidsfallintotheunit,disconnectthepowersupplyand have the unit checked by qualified personnel before any further operation.• Theunitshallnotbeexposedtodrippingorsplashingandthatnoobjectsfilled with liquid, such as vases, shall be placed on the unit.ON USENever use the unit where it would be subject to:-  Heat sources such as radiators or air ducts.-  Direct sunlight.1.   MUTE button2. BLUETOOTH   button3. VOL /  button / /  button4. AUXbutton5. BASS  /  button6.   button7.  LINE IN button8.  OPTICAL button9. TREBLE  /  button10 SOURCE  /  buttonRemotecontrol(with2xAAAbatteries)........................................... x1AC power adapter ............................................................................. x1Audio Cable ..................................................................................... x1Rubber Pad....................................................................................... x2Please locate the included accessories.Toorderreplacementunits,visithttp://www.RCAav.comREMOTE CONTROL1. STANDBY/ONbutton2. SOURCE   button3. BLUETOOTH   / LEVELindicator4. AUXIN/LEVELindicator5. OPTICALIN/LEVELindicator6. LINEIN/LEVELindicator7. VOLUME /  button8.  LINE IN 3.5mm jack9.  OPTICAL IN jack10.AUXINL/Rjack11.  DC IN jack12.  Remote SensorAVC MULTIMEDIA (“AVC”) makes the following limited warranty.  This limitedwarranty extend to the original consumer purchaser and is limited to non-commercial use of the product.ONE YEAR PARTS & LABOR WARRANTYAVC products purchased in the United States are warranted to be free fromdefects in materials or workmanship for a period of one year from the date of their original retail purchase. If the unit fails to conform to this warranty, we will service theproductusingneworrefurbishedpartsandproducts,atAVC’ssolediscretion.Duringaperiodof oneyearfromtheeffectivewarrantydate,AVCwillprovide,when needed, service labor to repair a manufacturing defect at its designated Service Center. To obtain warranty service in the United States, you must first call ourCustomerSupportCenterat1-800-506-5746or1-877-252-6873,duringthehourslistedintheboxbelow.ThedeterminationofservicewillbemadebyAVCCustomerSupport.PLEASEDONOTRETURNYOURUNITTOAVCWITHOUTPRIOR AUTHORIZATION.  New or remanufactured replacements for defective partsorproductswillbeusedforrepairsbyAVCatitsdesignatedServiceCenterfor one year from the effective warranty date. Such replacement parts or products are warranted for an additional one year from the date of repair or replacement.  The Customer will be required to ship the unit to the Service Center indicated at the time Customer Support is contacted to make the necessary repairs.  The customer is responsible for all transportation charges to the service facility. PACKAGING AND SHIPPING INSTRUCTIONWhenyousendtheproducttotheAVCservicefacilityyoumustusetheoriginalcartonboxandpackingmaterialoranequivalentasdesignatedbyAVC.LIMITED WARRANTYYOUR RESPONSIBILITY(1) You must retain the original sale receipt to provide proof of purchase.(2) These warranties are effective only if the product is purchased and operated in the U.S.A. or Canada.(3)Warranties extend only to defects in material or workmanship, and do notextendtoanyproductorpartswhichhavebeenlostordiscarded,ordamagetoproduct or parts caused by misuse, accident, improper operation or maintenance, or use in violation of instructions provided with the product, or to product which hasbeenalteredormodiedwithoutauthorizationofAVC,ortoproductsorpartsthereof which have had the serial number removed or changed.1.PressSTANDBY/ONbuttonontheSoundbaror  button on the remote to turn on the unit.2. Press SOURCE  /  on the remotetoselectAUXIN,OPTICALIN,LINE IN or Bluetooth source (input).  The LEDs located on top of Sound Bar will indicate the currently-selected source.3.PressVOLUME /  , BASS  /  or TREBLE  /  on the remote toadjustVolume,BassorTreblelevels.WhenadjustingVolume,BassorTreble, the four LEDs will temporarily display the current level setting (see illustration below).Note: When mute is enabled, the 4 LED indicators will ash. Press theMUTE button on the remote control to disable the mute function and LED ashingstop.Before Bluetooth pairing, you should turn on the Bluetooth function of your other device (such as, mobile phone with Bluetooth function).1.  Press SOURCE button on the unit or   button on the remote control to select BT (Bluetooth) mode.  The Bluetooth indicator light on the soundbar will blink.2.  On your device (mobile phone, MP3 player, etc.), select RCA RTS7220B-2 from the list of available Bluetooth connections.    Note: If your Bluetooth device (such as, mobile phone) requires a password whilepairing,pleaseenter4-digitnumber:0000. • IftheBluetoothpairingissuccessful,theBluetoothindicatorwillilluminate.• IftheBluetoothpairingisunsuccessful,theBluetoothindicatorwillblinkatslow speed.  Please try again.ENJOY THE  MUSIC THROUGH BLUETOOTH• Press  to begin or pause playback• Press /  to select a specific track• Pressandhold / tostartmovingbackward/forwardathighspeed.Caution:• WerecommendthatWall-mountingbecarriedoutbyaprofessional.Thewallmountbracket“key-holes”areintendedforusewith#8(Imperial)orM4(Metric)withheadsize:Diameter7.5-9.4mm.Additionaloralternativeparts may be needed for certain types of wall constructions.• Makesurethatthewall-mountisxedsecurelyenoughsothatitmeetssafety standards.• Allowatleast2”(5cm)separationinalldirectionsbetweentheSoundBarandotherAVequipment(suchasyourTVorSet-TopBox).• It is recommended that all cables (AC adapter and Audio cables) beconnected to the Sound Bar before placing it on the wall.Specifications and external appearance are subject to change without notice.Need more help?Please visit online help at www.RCAav.comSOLUTIONS• Makesureitispluggedin.• PressSTANDBY/ONbuttontoturnontheSoundBar.• PresstheVOLUME /  button on the top of the Sound BarorVOL /   button on the remote.• Ensurethesourceyou’veselectedisoutputtingaudio.Ifyou’re using“audio out”from yourTV,ensure yourTV isconguredtooutputaudio(seeTV’smenusettings).• Ensure your AV connections are properly made (ensureyou don’t have any loose connections).• Ensure you’ve selected the correct source (input) -  theLEDs located on the top of the Sound Bar will indicate the currently-selected source (input).• Mute is activated (the 4 LEDs on top of the Sound Barashes).Pressthemutebuttonontheremotecontrol.• Ensure the input source is selected PCM output on thesetup menu of the input device.• Reset the bluetooth connection by turning off and onyour connectind device, or this Sound Bar, or select other SOURCE on this Soundbar then back to BT mode again.• Ifbatteryisweak,pleasereplacethebatteryandensurethe new battery is installed correctly. • Pleaseensurethereisnothingblockingtheremotesensoron the front of the Sound Bar.PROBLEMSThe unit does not switch on.I have no sound.Cannot setup Bluetooth pairingThe remote control doesn’t workUSING THE AC ADAPTERUsing an AC adapter other than the one supplied with the unit may damage the unit.Caution:• Beforeuse,ensure theratedvoltageofthe adaptermatches yourlocalvoltage.• TheincludedACadapterisforusewiththisunitonly.Donotuseitwithother equipment.• If you are not going to use the unit for a long time, disconnect the ACadapter from the wall outlet.• WhenevertheACadapterispluggedintoawalloutlet,theACadapterwilldraw some power, even when the Sound Bar is turned off. Printed in ChinaThe Soundbar can be placed freestanding on a table or mounted on a wall. PLACING THE SOUNDBAR ON A WALLThe Soundbar requires additional mounting hardware that must be purchased separately.1.AfxtheRubberPads(included)totheSoundbarasshown.2.  Place the Wall Mount Template (supplied) on the wall and then mark the locations of the screw holes.3.  Drill the screws (not supplied) into the wall carefully.4.GentlyhangtheSoundbarontothescrewsinthewall.Note: Allow 2mm space between screw and the wall for fitting the wall mount bracket.USING THE REMOTE CONTROL• Point the remote control at the REMOTE SENSOR located on the unit(see Front Panel illustration for precise location).• When there is a strong ambient light source, the performance of theinfrared REMOTE SENSOR may be degraded, causing unreliable operation.• Therecommendedeffectivedistanceforremoteoperationisabout16feet(5 meters).TO CHANGE REMOTE BATTERIES1. Open the battery door. 2. Insert two AAA batteries.BATTERY REPLACEMENTWhen the batteries become weak, the operating distance of the remote control is greatly reduced and you will need to replace them.Notes:  • Iftheremotecontrolisnotgoingtobeusedforalongtime,removethebatteries to avoid corrosion damage caused by battery leakage.• Do not mix old and new batteries. Do not mix ALKALINE, standard(CARBON-ZINC)orrechargeable(NICKEL-CADMIUM)batteries.• Alwaysremovebatteriesassoonastheybecomeweak.• Weakbatteriescanleakandseverelydamagetheremotecontrol.• WARNING:Donotdisposeofbatteriesinare.batteriesmayexplodeorleak.CAUTION: Dangerofexplosionifbatteryisincorrectlyreplaced.Replaceonlywiththesame or equivalent type.CONNECT AUDIO THROUGH A DIGITAL OPTICAL CABLEConnect an Optical Cable (not supplied) from the OPTICAL IN jack on the SoundBar totheOPTICALOUT jackof yourTV,Set-TopBoxor Blu-ray/DVDPlayer.Note: OPTICAL IN only supports PCM signal.CONNECT AUDIO THROUGH AN ANALOG AUDIO CABLEConnect the supplied Audio Cable:1. from the LINE IN jack on the Sound Bar to the AUDIO OUT jacks of your TV,Set-TopBoxorBlu-ray/DVDPlayer.or2.fromtheAUXINjackstotheHeadphoneOutjackofyourTV,Set-TopBoxorBlu-ray/DVDPlayer.ConnectanAudioCable(notsupplied)fromtheAUXINjacksontheSoundBartotheAUDIOOUTjacksofyourTV,Set-TopBoxorBlu-ray/DVDPlayer.Plug one end of a 3.5mm Audio Cable (not included) into the LINE IN jack (top panel) on the Sound Bar and other end into your iPad®, iPhone®, iPod® or other audio devices.Wall mount bracketRubber PadLOCATION OF CONTROLS CONNECTIONSBASIC  OPERATIONBLUETOOTH PAIRINGPOWER SUPPLYREMOTE CONTROLTROUBLESHOOTINGPLACEMENTACCESSORIESSAFETY PRECAUTIONSLIMITED WARRANTYOUT OF WARRANTYIn the event your product requires repair after the limited warranty period has expired, please contact our Customer Support Center at 1-800-506-5746,1-877-252-6873 or www.RCAav.com Hours:  Monday–Thursday: 9am–7pm, Friday: 9am–5pm, Saturday: 9am–NOON Eastern time.Important:  You are responsible for any transportation, shipping or insurance relative to the return of product to our Product Returns Center.All warranties implied by state law, including the implied warranties of merchantability and tness for a particular purpose, are expressly limitedto the duration of the limited warranties set forth above.With the exception ofany warranties implied by state law as hereby limited, the foregoing warranty is exclusiveandinlieuofallotherwarranties,guarantees,agreementsandsimilarobligations of manufacturer or seller with respect to the repair or replacement of anyparts.InnoeventshallAVCbeliableforconsequentialorincidentaldamages.No person, agent, distributor, dealer or company is authorized to change, modify or extend the terms of these warranties in any manner whatsoever.The timewithinactionmustbecommencedtoenforceanyobligationofAVCarisingunderthe warranty or under any statute, or law of the United States or any state thereof, is hereby limited to one year from the date of purchase. This limitation does not apply to implied warranties arising under state law.This warranty gives you specific legal rights and you may also have other rights, which may vary, from state to state. Some states do not allow limitation on how longanimpliedwarrantylasts,whenanactionmaybebrought,ortheexclusionor limitation of incidental or consequential damages, so the above provisions may not apply to you.For more information on other products and services, please visit our web site at www.RCAav.com.Important:Alsokeepyour“BillofSale”asproofofpurchase.Serial no ......................................................Invoice no .........................................Date purchased ...........................................Dealer name .....................................FORSERVICEANDREPAIR,PLEASEVISITwww.RCAav.com.

Navigation menu