Alco Electronics W101 10.1 Inches Windows Tablet User Manual WT19303W87 Venturer QSG 2015 06 01

Alco Electronics Ltd 10.1 Inches Windows Tablet WT19303W87 Venturer QSG 2015 06 01

User Manual

Equipment tested forcompliance as acomplete unitWT19303W87Turning on your tablet for the first timeTablet dockingPress and hold the Power button 4~5seconds until the RCA logo appears.Select the region and language, then tap andfollow the onscreen instructions to setup the tablet.Be sure your home Wi-Fi network is turned on and connected to the internet.To wall outletNOTEThe keyboard connects to the tablet via the Connector. When the connection is successful, the tablet willautomatically adjust its settings to use the keyboard.Remove tablet from keyboardPower off the tabletTurn on the tablet in standby modePress the Power button to turn on thetablet screen.Swipe up the lock screen fromthe bottom edge of the display.Sleep / Standby modePress the Power button to turn off the tablet screen.You can shut down your tablet by doing either of the following:a. If your tablet is unresponsive, Press and hold thePower button until the message "Slide toshut down you PC" appears.b. Slide to the bottom edge of the display, then thetablet will be completely powered off.Tap Settings from the Charms bar, then tap Powerand select Shut down to do a normal shutdown.Volume +/-ConnectorUse to connect the tablet to keyboard.Touch padKeysThere are two ways to dock the tablet onto the keyboard.orQuick Start GuideGetting To Know Your TabletWindows buttonPress to open/closethe Windows Startscreen.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not causeharmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules.These limits are designed to provide reasonable p rotection against har mful int erfere nce in a re sidenti al inst all ation. Thisequipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouragedto try to correct the interference by one or more of the following measures:sReorient or relocate the receiving antenna.sIncrease the separation between the equipment and receiver.sConnect the equipment into an outlet on a circuit different from that to which the receiver is connected.sConsult the dealer or an experienced radio/TV technician for help.Warning: Changes or modifications not expressly approved by the party responsible for compliance (MLB International Inc., PO Box 1214, Lockport, NY, 14095, Tel: 716-240-0902) could void the user’s authority to operate the equipment.CAN ICES-3(B) / NMB-3(B)Warning: the AC adapter is used as disconnect device and it should remain readily operable during intended use. In order todisconnect the mains plug from mains completely, the AC adapter should be disconnected from the mains socket outlet completely.Some of the following information may not apply to your particular product; however, as with any electronic product, precautions should beobserved during handling and use.sRead these instructions.sKeep these instructions.sHeed all warnings.sFollow all instructions.sDo not use this apparatus near water.sClean only with dry cloth.sDo not block any ventilation openings. Install in accordance with the manufacturer’s instructions.sDo not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produceheat.sProtect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where theyexit from the apparatus.sOnly use attachments / accessories specified by the manufacturer.sUnplug this apparatus during lightning storms or when unused for long periods of time.sRefer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such aspower-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has beenexposed to rain or moisture, does not operate normally, or has been dropped.IMPORTANT SAFETY INSTRUCTIONSADDITIONAL SAFETY INFORMATIONsThe AC adapter and apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shallbe placed on the apparatus.sAlways leave sufficient space around the product for ventilation. Do not place product in or on a bed, rug, in a bookcase or cabinetthat may prevent air flow through vent openings.sDo not place lighted candles, cigarettes, cigars, etc. on the product.sCare should be taken so that objects do not fall into the product.sDo not attempt to disassemble the cabinet. This product does not contain customer serviceable components.sTo prevent the risk of fire or electric shock, do not expose this apparatus to rain or moisture.sDo not play your headset at high volume. Hearing experts warn against extended high-volume play.Copyright and Trademark NoticesIntel Inside logo is trademarks of Intel Corporation in the U.S. and /or other countries, Copyright Intel Corporation, 2015. All rightsreserved.The Wi-Fi CERTIFIED Logo is a certification mark of the Wi-Fi Alliance. The Wi-Fi Protected Setup Mark is a mark of the Wi-Fi Alliance.TheBluetooth®word mark and logos are registered trademarks owned by theBluetoothSIG Inc. Other trademarks and trade names arethose of their respective owners.About HDMIHigh-Definition Multimedia Interface (HDMI) is a high-speed digital interface that can transmit uncompressed high definition video and digitalmultichannel audio. It delivers high quality picture and sound quality. HDMI is fully backward compatible with DVI. As required by the HDMIstandard, connecting to HDMI or DVI products without HDCP (High bandwidth Digital Content Protection) will result in no Video or Audiooutput.The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMILicensing LLC in the United States and other countries.All other trademark appearing herein are the property of their respective owners. Specifications subject to change without notice.This device complies with Industry Canada Licence-exempt RSS-210. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

Navigation menu