ALL BEST TECHNOLOGY HS1-QI Bluetooth Speaker System with Alarm Clock Wireless Charging Station User Manual 311 XXX A0 THS1qi BAS T1WC 180313

All Best Technology Limited Bluetooth Speaker System with Alarm Clock Wireless Charging Station 311 XXX A0 THS1qi BAS T1WC 180313

User Manual

HS1-qiWireless Charging with Bluetooth SpeakerTIPS / IMPORTANT:All safety and operation instructions should be read thoroughly before proceeding and please keep the handbook for future reference.
IMPORTANT SAFETY INSTRUCTIONS2
3IMPORTANT SAFETY INSTRUCTIONSFCC STATEMENT1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and(2) This device must accept any interference received, including interference that may cause undesired operation.2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:　 Reorient or relocate the receiving antenna.　 Increase the separation between the equipment and receiver.　 Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.　 Consult the dealer or an experienced radio/TV technician for help.FCC Radiation Exposure StatementThis equipment complies with FCC radiation exposure limits set forth for an uncontrolledenvironment. This equipment should be installed and operated with minimum distance 20cmbetween the radiator & your body
4INFORMATIONBluetooth Specification: 4.2+EDRBluetooth Profiles: HSP、HFP、A2DP and AVRCPOperating Distance: 10 meters Class IIOutput Power: 3W+3WDriver Unit: 4Ohm 3w 2inFrequency Range: 40Hz-20KHzS/N Ratio:＞65dBDistortion Rate:＜1%FM Frequency Range: 87.5-108MHzSPECIFICATIONS
5UNIT FEATURES & FUNCTIONSFM FREQUENCYUSB MODEALARM TIMESLEEPTIME SETTINGTIME SETTINGTIME SETTING
6UNIT FEATURES & FUNCTIONSUSB MODEBLUETOOTHNEXT SONG/Adjusting Alarm TimeVOL-AUX INFMBACKWARD SONG/Adjusting Alarm TimeWireless Charging Wireless Charging StationFM ModeSkip Backwards last song/Adjusting Alarm TimePLAY/PAUSE,TALK,SCAN FMAUX IN ModeBluetooth&USB,Play/Pause,Answer the phone and Hang up,Auto scan FM stationUSB Play ModeBluetooth ModeAlarm Setting,On/OffSkip Forwards Next Song/Adjusting Alarm Time
7BASICWhen palying music, press“ ”to pause the music. Press“ ” to skip backwards last song;Press“ ” to skip forwards next song.Press“ ” to put FM Radio on, “ ” appears on the LCD display. Press and hold “ ” to autoscan radio staon and store the scanned staons 3)Press “ ”to put Bluetooth on. Go to moblie seng, turn on Bluetooth and search Blue-tooth devices. Connect “HS1-qi”. When it is su-ccessfully paired,you will hear a sound of“DU”.Play music from your mobile now.(when Blue-tooth is connected,press “ ”or other mode key to switching it to other mode, Bluetooth will be OFF automacally and get disconnect-ed with mobile. When switching it to Bluetoothmode again,connect“HS1-qi”manually or auto-macally.)When a phone call is coming, press“ ”to answer the phone.HS1-qi OPERATIONANSWER THE PHONESET ALARM TIMEWhen alarm is off, press “ “ to set alarm me. Press “ ” or “ “ to adjust alarm me. It will confirm and exit seng in 5 seconds if no operaon on any key. Press “ ”to hand up when having a phonecall.HANG UPPLAY MUSICor press and holdsnooze.Alarmsocket
8BASICThe 3.7V lithium baery is to retain the clock/alarmin case of a power failure. It can not display the alarm/clock me when baery is low,need charge.Back-up the lithium batteryInfrared remote control(Option)Press“ ” to put AUX IN on, “ ” appears on the LCD dis-play. Pug in the 3.5mm audiocable into the AUX IN jack.Play music now.accordingly.The frequency starts from 87.5MHz to108MHz and skips at every 0 .1 MHz in scanning process. Once catching a staon , it stops a secondand store it , then connues the auto-scanning. When it scans from 87.5MHz to 108MHz, it will stop scan automaccally. Press“ ” or “ ”to select the staon. Install the baery: Unscrew the back cover of the remote control, open the screws, install 3 pieces AAA baery, lock the screw and screw the back cover. Sync me with phone: Unscrew the back cover of the remote control, connect the remote control's lightning connector to the iPhone interface. In this way, the me will be synced with iPhone. Sync me with the reomte control: Align the remote control with the alarm screen,press the sync buon on the remote control, the me of the remote control will be transmied to the alarm clock and turn off the alarm, reset the alarm.
9WIRELESS CHARGE
10CARE AND MAINTENANCE / FAQs
11NOTICEBackup battery was low, so please charge it.* Please comply with the actural product if there is any discrepancy between the product and the content of the manual
Homtime Group LTDinfo@homtime.comwww.homtime.comwww.facebook.com/homtime.global

Navigation menu