Alligator Game KC9512 FM Transmitter with Auto Power Adapter User Manual

Download:
Mirror Download [FCC.gov]
Document ID	631358
Application ID	WrZygz8b88UOCSigy3qGAw==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	4.13kB (51618 bits)
Date Submitted	2006-02-24 00:00:00
Date Available	2006-02-24 00:00:00
Creation Date	2006-02-23 17:34:05
Producing Software	pdfFactory v1.57 (Windows XP Chinese)
Document Lastmod	0000-00-00 00:00:00
Document Title	Microsoft Word - User manual.doc
Document Creator	pdfFactory http://www.pdffactory.com
Document Author:	cee3

KC-9512/P-25 Digital FM Transmitter with Auto Power
Adaptor
Instruction Manual
FM Transmitter with Car Adapter is designed for the iPod/mini iPod/iPod Photo/iPod nano/iPod Video consoles
to use on the road. The Car Adapter not only charges your iPod, but also broadcast music through the FM radio
channels in automobile. FM Transmitter can memorize the channel for easier search. It enables iPod playing
music without earphone and let everyone inside automobile could share the joy of listening hot songs together.
Features
1.
2.
3.
4.
5.
6.
7.
8.
9.
Listening and Charging iPod at the same time
Safe placement to your iPod by 6 plates for different models of iPod.
Car Adaptor can move up and down with 5 different angles for large extent of flexibility
The clear blue bar
Lcd display the frequency
Easy Operation by Up and Down buttons to select radio frequency
Digital frequency selection allows stable and clear broadcast of the FM Transmitter
LED lights up on the top of Car Adapter for indication of connection
Memorize your channel, keep away interference from other FM signals
Operation
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
Turn off iPod console before connecting FM Transmitter with Car Adapter
Select the appropriate tray (shown under the tray) to match up with your corresponding iPod console.
Plug the Car Adapter into the cigarette socket of your car, the LED on the top of Car Adapter will then
light on and the FM transmitter will then display the channel
Plug the power cable into the iPod console which will indicates charging status if connected properly
Turn on the iPod
Press the Up or Down button of FM transmitter to select the frequency
Make sure to match the FM Transmitter with your car radio on the same frequency, and then car’s FM
stereo could broadcast the music of iPod if succeed.
Pressing MEM(M) button to memorize the desired radio channel
Turn off iPod before unplug FM transmitter with Car Adapter or when not in use
Store and overwrite the channel:
Choose the desired frequency by pressing UP or Down button
Press the MEM continuously until the “M” appears on the screen and the unit of frequency
flashes below.
When the unit of frequency flashes 3 times, it represents for success of storage. Release the
button and select the other desired frequency.
Specification
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
Input Voltage:
DC12 V
0.8A
Output Voltage:
DC11.3 V 0.8A
Safety fuse:
1A
High-stability crystal oscillator
Phase-lock loop control
Radio Frequency Range:
88.1MHz-107.9MHz
Frequency Response: 150Hz to 20KHz
Stereo separation:-25dB at 25cm
Signal distortion: less than 5%
Station Memory Presets:
10 Channels
Maximum receivable range: 19.5 feet
Precautions
When iPod is in use with FM transmitter with Car Adaptor, avoid using it with any devices simultaneously.
"NOTE:Changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment."
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC ID: S4CKC9512
MADE IN CHINA
This device complies with part 15 of the FCC
Rules. Operation is subject to the following
two conditions: (1) this device may not cause
harmful interference, and (2) this device must
accept any interference received, including
interference that may cause undesired
operation.
Date:25/11/2005

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Title                           : Microsoft Word - User manual.doc
Author                          : cee3
Creator                         : pdfFactory http://www.pdffactory.com
Producer                        : pdfFactory v1.57 (Windows XP Chinese)
Create Date                     : 2006:02:23 17:34:05
Page Count                      : 2

EXIF Metadata provided by EXIF.tools