Alpha Comm QUIKCELL Bluetooth Stereo Headset User Manual
Alpha Comm Enterprises, Inc. Bluetooth Stereo Headset
User manual
Bluetooth Stereo Headset User Manual ˄Quikcell˅ FCC ID: X6HQUIKCELL Basic Specifications Size: 580(R*125+L*406.2*Frame 48.8)*12.35*8.35 mm Weight: 9.7g˄Net Weight˅ Charging Port: Micro USB Keys: 3 (MFB button, volume+/backward button, volume- /forward button,) Battery: Rechargeable lithium polymer battery 3.7V; Charging Specifications: DC 5V/60mA Charger Output: 5V/0.5~1.0A Charge Indicator: Red LED light (Charging) / Blue LED light (Charging completed) Standby Time: 100 hours Talk Time: 4.5 hours and upwards Music Time: 4 hours and upwards Charging Time: 1.5 hours Volume Control / Variable for per stage : Stage 16 / 1.5dB variable for per stage. Indicator for Charge in working stage: Battery voltage lower than 3.3V˄the stage of battery lower than 15%˅, there will be a warning tone with LED indicator flashing in red; battery voltage lower than 3.1V ( the stage of battery lower than 5%), the headset will power off directly. Operating Temperature: Charging 0 ~ 40ć, charging than -20 ~ 60ć. ƵStorage Temperature: -40 ~ 80ć. Speaker and MIC parameters Speaker Specifications / mode:9.0mm, Dynamic Distortion˖Below 1% Impedance:32¡/typ Frequency(Hz): 20Hz̚20KHz MIC Sensitivity: -42f3dB Bluetooth Parameters Bluetooth Version: 4.0 Support Profile: HSP, HFP, A2DP, AVRCP The Remote Control to Speaker: MFB (Power ON / Power Off / Play / Pause) ; Vol+/Next song, Vol-/Previous song. Device Name: Quikcell Pass: 0000 RF Transmitter: class II (-6dBm ~ +4dBm) Receive Sensitivity: -90dBm 2.480GHz Transmission Range (Hz): 2.402GHz 2.40GHz ~~2.48GHz Transmission Distance: 10m Operating Instructions(The Switching between Spanish and English ) The Switching between Two Kinds of Language˖Double click the MFB button when the headset is power on and make sure it disconnects with any device. At this time you will hear the warning tone. Power On When the headset is off, press and hold the multi-function Button (MFB) for 3 seconds. The LED indicator will flash twice in blue. At this time you will hear the words “Power ON/” from the headset. The headset will be paired with the last connected Bluetooth device or mobile phone automatically when turned on. Power Off When the headset is on, press and hold the MFB for 3 seconds. The LED indicator will flash once slowly in red. At this time, you will hear the words “Power Off/” from the headset. The headset will disconnect from your phone devices when turned off. Pairing Mode When the headset is off, press and hold MFB for 6 seconds until the LED indicator flashes red and blue in alternating colors. At this time, you will hear the words “Pairing/” from the headset. Ć If you release the MFB before the headset goes into pairing mode, it will power on. If you want to enter into pairing mode again, please power off the headset or press the Vol+ and Vol- button concurrently. Easy connection function If the headset doesn’t connect with any phones when it is on, you can enter into speed pairing mode by pressing the Vol+ and Vol- button concurrently and connect with your phone. Answering calls If a call comes in when listening to music or headset is standing by, press the MFB shortly to answer the incoming call. If the music is playing, it will pause automatically during the call, the music will start playing automatically. Reject Calls If a call comes in, press and hold the MFB button for 2 seconds to reject the incoming call. End Calls Press the MFB shortly to terminate when you finished your call. Volume To adjust the volume when talking on the phone, press the Vol+ and Vol- to make volume do up and down. When you reach the max/min volume, you will hear a warning tone. Last Number Redial When listening to music or headset is standing by, double click MFB to redial the last number. If you are listening to music, it will pause automatically during the call. Mute When talking on the phone, press and hold Vol+ or Vol- for 2 seconds to mute your phone. You will hear the caller, but the caller will not hear you. There will be a warning tone every 10 seconds, reminding you that you are in mute mode. Quit Mute Press and hold Vol+ or Vol- for 2 seconds to exit mute mode. Switching Between Your Mobile Phone and Headset When talking on the phone, double-click the MFB to switch the voice from your headset to your mobile phone. By double-click the MFB again, the voice will switch back to the headset. Reconnect When the headset is disconnected from your mobile phone, you will hear the words “Your headset is disconnected”. If you press the MFB, it will reconnect. You will hear the words “Your headset is connected” from the headset. Ć Some mobile phone may have a prompt screen, that will ask you if you would like to pair your device. Voice-Command Dial If your mobile phone supports this function, press and hold Vol+ or Vol- for 2 seconds to activate voice command. By re-pressing and re-holding vol+ or vol- for 2 seconds during the voice dial mode, voice dial will be canceled. Ć Please refer to the manual of your mobile phone for voice-command dial support. Connect with 2 mobile phones A. First disconnect the Bluetooth device from your phone if it is already connected. B. Press vol+ and vol- concurrently to put the headset in pairing mode. C. Turn on and search Bluetooth device on your second phone until you find “SH19” and select to begin pairing. D. Please reconnect with your first mobile phone device. E. Now you should have two mobile phones connected with the headset. Transfer Calls When you are talking on the phone and receive another incoming call, press the MFB for 2 seconds to reject the incoming call. If you click Vol+ and Vol- concurrently (with the reminding tone), you will answer the incoming call. Your first call will be placed on hold. When you click Vol+ and Vol- concurrently again, you will transfer back to your first call. You should hear a beep. During this time your second call will be placed on hold. You can also end the call by clicking the MFB. Music Play Operating Music Play Operate on the phone or Click MFB of the headset. (Music will play automatically on some mobile phones when it connect with Bluetooth device) Pause and Restart Music When listening to music, click MFB to pause music and click MFB again to restart music. Volume To adjust the volume when listen music, press the V+ or V- to adjust the volume up or down. When you reach the max/min volume, you will hear a warning tone. Play Previous Song Press volume- for 2 seconds to play previous song. Play Next Song Press volume+ for 2 seconds to play next song. LED Indicator Status Charging Red LED Light Charging Complete Blue LED light Power ON Blue LED light flashes twice slowly Power Off Red LED light flashes once slowly Pairing Mode LED light flashes in red and blue alternately Power On (Not Connected) Blue LED light flashes once every 5 seconds Power On (Connected) Blue LED light flashes once every 3 seconds Power On (Talking) Blue LED light flashes once every 3 seconds Power On (Dial Call) Blue LED light flashes continuously Power On (Incoming Call) Blue LED light flashes continuously Power On (Play Music) Blue LED light flashes twice every 4 seconds Battery Low Red LED light flashes once every 20 seconds with reminding tone “battery low” Notes: It will turn off automatically after 5 minutes if without any connection with mobile phone when it turns on. Pairing time: 3 minutes. It will quit the pairing mode automatically after 3 minutes if without any connection with mobile phone when it is in the state of pairing. FCC Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Author : Administrator Create Date : 2015:02:25 14:15:30+08:00 Modify Date : 2015:03:07 13:30:17-05:00 XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Producer : Acrobat Distiller 9.0.0 (Windows) Metadata Date : 2015:03:07 13:30:17-05:00 Creator Tool : PScript5.dll Version 5.2 Document ID : uuid:922C463123B0E411A318C3065C16BB21 Instance ID : uuid:469d3842-7e3d-4fa4-994a-ede80125beac Derived From Instance ID : uuid:febffa2b-2297-4ee6-bd7e-0a6bdd93b606 Derived From Document ID : uuid:ed68f3e7-66c9-4e9a-b290-894f4a08df10 Format : application/pdf Title : untitled Creator : Administrator Page Count : 7EXIF Metadata provided by EXIF.tools