Alpha Comm S500 Bluetooth Headset User Manual Bluetooth Headset
Alpha Comm Enterprises, Inc. Bluetooth Headset Bluetooth Headset
user manual
USER MANUAL
Bluetooth Headset
Model Name: S500
FCC ID : X6HS500
S500 stereo Bluetooth headset
Operation Instructions
Power on
When the headset is off, press and hold the Multi-function Button (MFB) for 2 seconds, the LED
indicator will flash slowly in blue. Meantime, you will hear a tone ”Hello” from the speaker of the
headset; the headset will be paired with last connected bluetooth devices or mobile phones
automatically when it’s on.
Power off
When the headset is power on, press and hold the MFB for 4 seconds, the LED indicator will flash
slowly in red. Meantime, you will hear a tone “Goodbye” from the speaker, the headset will be
turned off when disconnected with any phone.
Pairing mode
When the headset is off, press and hold MFB for 5 seconds until LED flashes red and blue in
alternating colors, together with a tone “discovering”.
※ If you release the MFB before headset goes into pairing mode, it will power on and connect
with the last paired devices, if you want to pair the headset with a new phone, please power
it off and then enter into pairing mode, the headset will stop pairing when fail to connect
with any phone in 3 minutes.
Easy connect function
If the headset doesn’t connect with any phone when it’s on, it will be entering into pairing mode
by pressing V+& V- concurrently.
Answering calls
If a call comes in when listening to the music or headset standing by, press MFB to answer the
incoming call, together with a tone “call answered”, the music will be paused during this time,
indicator light
V+(next)
MFB
V-(previous)
after finished your call the music will be playing on automatically.
Reject calls
If a call comes in when listening to the music or headset standing by, press and hold MFB for 2
seconds to reject the call, meantime you can hear a tone “call rejected” from the speaker of the
headset.
End calls
Press MFB button to terminate a phone call, meantime you can hear a tone “call terminated”
from the speaker, at the same time, music will restart automatically if you are listening to
previously.
Volume adjust when talking on the phone
By pressing the V+/V- to make volume up/down, you’ll hear a warning tone when reaching
max/min volume.
Last number redials
When listening to the music or headset standing by, double click MFB to redial the last number,
meantime you can hear a tone “last number redial” from the speaker, the music will be paused
during this time.
Mute
When talking on the phone, press and hold Vol+ or Vol- for 2 seconds to hold your microphone,
you can hear from the caller but the caller fails to hear from you, there will be a warning tone
from the headset every 3 seconds.
Quit mute
By pressing and holding Vol+ or Vol- for 2 seconds to quite the mute mode.
Switching between your mobile phone and headset
When talking on the phone, double-click the MFB to switch the voice from your headset to
mobile phone, by double click MFB again, the voice will back to the headset together with a tone
“transfer audio”.
Reconnect:
When the headset and mobile phone are disconnected, you can hear a tone “your device is
disconnected”, meantime if you press MFB, it will be reconnect together with a tone “your device
is connected”, some phones may be prompted whether you’d like to be paired.
Voice dial
If your mobile phone supports this function, press and hold V+ or V- for 2 seconds to activate
voice commands when the headset standby or music playing, meantime you will hear a tone
“voice dial”, by re-pressing and re-holding V+ or V- for 2 seconds during the voice dialing, the
voice dial will be cancelled, please refer to the manual of your mobile phone for support about
voice commands
Pause and restart music：
When listening to the music, click MFB to pause, click MFB again to restart it.
Play previous song
Press V+ for 2 seconds, play PREV song.
Play next song
Press V- for 2 seconds, play next song.
Connect with 2 mobile phones
A, please disconnect the Bluetooth device from your phone 1 if it’s connected already.
B, by pressing V+&V- concurrently to make the headset in pairing mode.
C, Turn on& search Bluetooth device on your second phone until you find “S500”, and then please
make pairing till success.
D, please do pairing with your phone 2.
E, now 2 mobile phones connecting finished.
Transfer call.
When you’re talking on the phone and another call coming in, press MFB for 2 seconds to reject
the incoming call, if you click V+& V- concurrently, you can receive the incoming call, your first call
will be hold on, when you click V+& V- concurrently again, you’ll back to the first call. To switch
back to the first call, click V+V- concurrently until you hear a beep again, you can answer the
second call by ending the first call with a simple click on MFB, press and hold V+& MFB for 2
seconds until you hear a beep again.
Note: this operation requires that your mobile phone supports the call waiting feature.
LED indicator status
Charging
Red LED lights
Charging complete
Blue LED lights
Power on
(Connected)
Blue LED flashes once every 3 seconds
Power on
(Talking)
Blue LED flashes once every three seconds
Power on
(Incoming call)
Blue LED flashes continuously
Music playing
Blue LED flashes twice every 4 seconds
Power on
(Not connected)
Blue LED flashes once every 5 seconds
Battery low
Red LED flashes once every 20 seconds
with a tone “battery low”
Pairing mode
LED flashes in red and blue alternatively
Specifications
V3.0+V4.0 Bluetooth Technology
Profile supports: HSP、HFP、A2DP、AVRCP
Transmission Distance: 10m
Model: S500
Pin Code: 0000
Transmission range: 2.402GHz～2.480GHz
Music time: about 4.5 hours
Talk time: about 4 hours
Standby time: about 100 hours
Operating temperature: 0～40℃(charging)、-20～60℃(peacetime)。
Important Regulatory Information
This device complies with part 15 of the FCC rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
Changes or modifications to this unit not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.