Alpha Networks 2005100093 Wireless Lan Card User Manual User s manual For FCC user only960824

Alpha Networks Inc. Wireless Lan Card User s manual For FCC user only960824

Manual

Download: Alpha Networks 2005100093 Wireless Lan Card User Manual User s manual  For FCC user only960824
Mirror Download [FCC.gov]Alpha Networks 2005100093 Wireless Lan Card User Manual User s manual  For FCC user only960824
Document ID834834
Application ID3ulah5k1FkQk+S9l21taEg==
Document DescriptionManual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize13.07kB (163409 bits)
Date Submitted2007-08-28 00:00:00
Date Available2007-08-28 00:00:00
Creation Date2007-08-24 16:32:31
Producing SoftwarepdfFactory Pro 3.10 (Windows XP Professional Chinese)
Document Lastmod2007-08-24 16:34:33
Document TitleUser's manual _For FCC user only960824_.doc
Document CreatorpdfFactory Pro www.ahasoft.com.tw/FinePrint
Document Author: Carol

User’s Manual
Model : WMP-G11
(Wireless Lan Card)
1.0 Scope
1.1 Document
This document is to specify the product requirements for 802.11 g/b Wireless Lan
Card. This Card is based on Ralink chipset that complied with IEEE 802.11g and
IEEE 802.11b standard from 2.4~2.5GHz, and it can be used to provide up to 54Mbps
for IEEE 802.11g, or 11Mbps for IEEE 802.11b to connect your wireless LAN.
With seamless roaming, fully interoperability and advanced security with WEP
standard, 802.11 g/b Wireless Lan Card offers absolute interoperability with
different vendors’ 802.11g and 802.11b Access Points through the wireless LAN.
1.2 Product Features
Ÿ
Compatible with IEEE 802.11g high rate standard to provide wireless 54Mbps
data rate
Ÿ
Compatible with IEEE 802.11b high rate standard to provide wireless 11Mbps
data rate
Ÿ
Operation at 2.4 ~ 2.5GHz frequency band to meet worldwide regulations
Ÿ
Dynamic date rate scaling at 6, 9, 12, 18, 24, 36, 48, 54Mbps for IEEE 802.11g
Ÿ
Dynamic date rate scaling at 1, 2, 5.5, and 11Mbps for IEEE 802.11b
Ÿ
Maximum reliability, throughput and connectivity with automatic data rate
switching
Ÿ
Supports wireless data encryption with 64/128-bit WEP for security
Ÿ
Supports infrastructure networks via Access Point and ad-hoc network via
peer-to-peer communication
Ÿ
One-piece PC Card design to fully support PC Card type II defined mechanical
and environmental stress conditions
Ÿ
Support WPA and WPA2 enhanced security
Ÿ
Friendly user configuration and diagnostic utilities
Ÿ
Drivers support Windows 98SE, ME, 2K, and XP
2.0 Requirements
The following sections identify the detailed requirements of the 802.11 g/b Wireless Lan Card.
2.1 Functional Block Diagram
Mini CPI
PC
802.11b/g
802.11b/g
MAC/BB
Radio
PA TQP
Transceiv
777002
2.2 General Requirements
2.2.1 IEEE 802.11g Section
Feature
Detailed Description
2.2.1.1
Standard
Ÿ
IEEE 802.11g
2.2.1.2
Radio and
Ÿ
BPSK, QPSK, 16QAM, 64QAM, OFDM
Ÿ
2400~2483.5 MHz ISM band
Ÿ
11 channels for United States / Canada
Modulation
Type
2.2.1.3
Operating
Frequency
2.2.1.4
Channel
Numbers
13 channels for Europe Countries
13 channels for Japan
11 channels for Taiwan
2.2.1.5
Data Rate
Ÿ
6, 9, 12, 18, 24, 36, 48, 54Mbps
2.2.1.6
Media Access
Ÿ
CSMA/CA with ACK
Ÿ
Average Power 12dBm at 6Mbps ~ 54Mbps
Ÿ
Typical Sensitivity at Which Frame (1000-byte
Protocol
2.2.1.7
Transmitter
Output Power
2.2.1.8
Receiver
Sensitivity
PDUs) Error Rate = 10%
Ÿ
–85dBm at 6Mbps
Ÿ
–79dBm at 24Mbps
Ÿ
–70dBm at 48Mbps
Ÿ
–67dBm at 54Mbps
2.2.2 IEEE 802.11b Section
Feature
Detailed Description
2.2.2.1
Standard
Ÿ
IEEE 802.11b
2.2.2.2
Radio and
Ÿ
DQPSK, DBPSK, DSSS, and CCK
Ÿ
2400~2483.5MHz ISM band
Ÿ
11 channels for United States / Canada
Modulation
Schemes
2.2.2.3
Operating
Frequency
2.2.2.4
Channel
Numbers
13 channels for Europe Countries
14 channels for Japan
#
Feature
Detailed Description
11 channels for Taiwan
2.2.2.5
Data Rate
Ÿ
11, 5.5, 2, and 1Mbps
2.2.2.6
Media Access
Ÿ
CSMA/CA with ACK
Ÿ
Average Power 16dBm at 11, 5.5, 2, and
Protocol
2.2.2.7
Transmitter
Output Power
2.2.2.8
1Mbps
Receiver
Ÿ
Typical –83dBm for 11Mbps @ 8% PER
Sensitivity
Ÿ
Typical –88dBm for 2Mbps @ 8% PER
2.2.3 General Section
Feature
Detailed Description
2.2.3.1
Antenna Type
Ÿ
Integrated Printed-PCB antennas with dual
diversity function
2.2.3.2
Ÿ
3.3VDC +/- 5%
Current
Ÿ
450 mA at transmit mode
Consumption
Ÿ
300 mA at receive mode
Ÿ
50 mA at sleep mode
Ÿ
PC Card Type II
Ÿ
Power LED
Ÿ
Link LED
Operating
Voltage
2.2.3.3
2.2.3.4
Form Factor and
Interface
LEDs
2.3 Software Requirements
The Configuration Software supports Microsoft Windows 98SE, ME, 2000, and XP. This configuration
software includes the following functions:
Ÿ
Information
Information allows you to monitor network status.
Ÿ
Configuration
Configuration allows you to configure parameters for wireless networking.
Ÿ
Security
Supports enhanced security WEP, 802.1x,WPA,WPA2
2.3.1 Information
Feature
Detailed Description
2.3.1.1
General
Ÿ
General Information shows the name of
Wireless Adapter, Adapter MAC Address,
Information
Regulatory Domain, Firmware Version, and
Utility Version.
2.3.1.2
Current Link
Ÿ
Current Link Information shows the Current
Setting ESSID, Channel Number, Associated
Information
BSSID, Network Type (infrastructure or
Ad-hoc network), WEP Status (enable or
disable), Link Status (Connect or Dis-connect),
802.11g Transmit Speed (6, 9, 12, 18, 24, 36,
48, 54Mbps), 802.11b Transmit Speed (1, 2,
5.5, 11Mbps), Signal Strength, and Link
Quality.
2.3.1.3
Site survey
Ÿ
To search the neighboring access points and
display the information of all access points.
2.3.2 Configuration
Feature
Detailed Description
2.3.2.1
ESS ID
Ÿ
Input an SSID number if the roaming feature is
enabled
2.3.2.2
Network Type
Ÿ
Supports for ASCII printable characters.
Ÿ
Ad-hoc Mode and 802.11 Ad-hoc Mode for
network configurations that do not have any
access points
Ÿ
Infrastructure Mode for network
configurations with access points
2.3.2.3
Power Save
Ÿ
Extend the battery life of clients by allowing
the client to sleep for short periods of time
while the Access Point buffers the messages.
2.3.2.4
RTS Threshold
Ÿ
Set the number of bytes used for fragmentation
boundary for messages
2.3.2.5
Fragment
Ÿ
Threshold
2.3.2.6
Transmission
Speed
Set the number of bytes used for RTS/CTS
boundary
Ÿ
This indicates the communication rates. Select
appropriate transmission speed to match your
#
Feature
Detailed Description
wireless LAN settings
2.3.2.7
Roaming
Ÿ
Support Automatic or Manual Rescan to
associate with access point.
2.3.3 Security
Feature
Detailed Description
2.3.3.1
Encryption
Ÿ
RC4 encryption algorithm
Ÿ
Support 64-bit and 128-bit WEP encryption
Ÿ
Support open system and shared key
authentication
2.3.3.2
WEP
Ÿ
Four WEP keys can be selected
Management
Ÿ
STA with WEP off will never associate any AP
with WEP enabled
2.3.3.3
802.1x
Ÿ
WEP Key Format: Option for Hex format
Ÿ
Support EAP-TLS, EAP-TTLS, and
EAP-PEAP
2.3.3.4
WPA&WPA2
Ÿ
Support WPA/WPA2-PSK and
WPA/WPA2-EAP
Ÿ
Support Cipher Mode AES and TKIP
2.4 Mechanical Requirements
Feature
Detailed Description
2.4.1
Length
Ÿ
110mm
2.4.2
Width
Ÿ
54mm
2.4.3
Height
Ÿ
5mm
2.5 Compatibility Requirements
This device passes the following compatibility requirements.
Feature
Detailed Description
2.5.1
Wi-Fi
Ÿ
Meet Wi-Fi certification for IEEE 802.11a and
IEEE 802.11b/g product
2.5.2
WHQL
Ÿ
Meet applicable WHQL certification
requirements
2.5.3
Physical Layer and
Functionality
Ÿ
Meet ALPHA Engineering Test Plan and Test
Report
2.6 Requirements of Reliability, Maintainability and Quality
Feature
Detailed Description
2.6.1
MTBF
Ÿ
Mean Time Between Failure > 30,000 hours
2.6.2
Maintainability
Ÿ
There is no scheduled preventive maintenance
required
2.6.3
Quality
Ÿ
The product quality is followed-up by ALPHA
factory quality control system
2.7 Environmental Requirements
Feature
Detailed Description
2.7.1
Operating
Ÿ
Temperature
operation when operating in ambient
temperature of 0 ℃ to +55℃.
Conditions
2.7.2
Non-Operating
The product is capable of continuous reliable
Ÿ
Neither subassemblies is damaged nor the
Temperature
operational performance is degraded when
Conditions
restored to the operating temperature after
exposing to storage temperature in the range
of –20 ℃ to +75 ℃.
2.7.3
2.7.4
Operating
Ÿ
The product is capable of continuous reliable operation
Humidity
when subjected to relative humidity in the range of 10%
conditions
and 90% non-condensing.
Non-Operating
Ÿ
The product is not damaged nor the
Humidity
performance is degraded after exposure to
Conditions
relative humidity ranging from 5% to 95%
non-condensing
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
no guarantee that interference will not occur in a particular installation.
However, there is
If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
FCC Caution: Any changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate this equipment.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20cm
between the radiator & your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.
IEEE 802.11b or 802.11g operation of this product in the U.S.A. is firmware-limited to channels
1 through 11.
This device is intended only for OEM integrators under the following conditions:
The antenna must be installed such that 20 cm is maintained between the antenna and users,
and
The transmitter module may not be co-located with any other transmitter or antenna,
For all products market in US, OEM has to limit the operation channels in CH1 to CH11 for
2.4G band by supplied firmware programming tool. OEM shall not supply any tool or info to the
end-user regarding to Regulatory Domain change.
As long as 3 conditions above are met, further transmitter test will not be required. However,
the OEM integrator is still responsible for testing their end-product for any additional
compliance requirements required with this module installed (for example, digital device
emissions, PC peripheral requirements, etc.).
IMPORTANT NOTE: In the event that these conditions can not be met (for example certain
laptop configurations or co-location with another transmitter), then the FCC authorization is no
longer considered valid and the FCC ID can not be used on the final product. In these
circumstances, the OEM integrator will be responsible for re-evaluating the end product
(including the transmitter) and obtaining a separate FCC authorization.
End Product Labeling
This transmitter module is authorized only for use in device where the antenna may be
installed such that 20 cm may be maintained between the antenna and users. The final end
product must be labeled in a visible area with the following: “Contains FCC ID:
RRK2005100093”.
Manual Information To the End User
The OEM integrator has to be aware not to provide information to the end user regarding how
to install or remove this RF module in the user’s manual of the end product which integrates
this module.
The end user manual shall include all required regulatory information/warning as show in this
manual.
Industry Canada Statement
This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the
following two conditions:
1) this device may not cause interference and
2) this device must accept any interference, including interference that may cause undesired
operation of the device
This device has been designed to operate with an antenna having a maximum gain of 4.74
dBi.
Antenna having a higher gain is strictly prohibited per regulations of Industry Canada. The
required antenna
impedance is 50 ohms.
To reduce potential radio interference to other users, the antenna type and its gain should be
so chosen that the EIRP is not more than required for successful communication.
IMPORTANT NOTE:
IC Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled
environment. End users must follow the specific operating instructions for satisfying RF
exposure compliance. To maintain compliance with IC RF exposure compliance requirements,
please follow operation instruction as documented in this manual.
以下警語適用台灣地區:
經型式認證合格之低功率射頻電機,非經許可,公司、商號或使用者均不得擅自變更頻率、加大
功率或變更原設計之特性及功能。
低功率射頻電機之使用不得影響飛航安全及干擾合法通信;經發現有干擾現象時,應立即停用,
並改善至無干擾時方得繼續使用。前項合法通信,指依電信法規定作業之無線電通信。低功率射
頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。
本模組於取得認證後將依規定於模組本體標示審驗合格標籤,並要求平台上標示「本產品內含射
頻模組:ID 編號」

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Copy, Extract, Print high-res
XMP Toolkit                     : 3.1-701
Create Date                     : 2007:08:24 16:32:31+08:00
Creator Tool                    : pdfFactory Pro www.ahasoft.com.tw/FinePrint
Modify Date                     : 2007:08:24 16:34:33+08:00
Metadata Date                   : 2007:08:24 16:34:33+08:00
Format                          : application/pdf
Creator                         : Carol
Title                           : User's manual _For FCC user only960824_.doc
Producer                        : pdfFactory Pro 3.10 (Windows XP Professional Chinese)
Document ID                     : uuid:a9ae309f-94e8-4fb9-a989-9177b34d17fc
Instance ID                     : uuid:0c3a6964-7977-46c2-ba7a-e5515afdd86c
Page Count                      : 11
Author                          : Carol
EXIF Metadata provided by EXIF.tools
FCC ID Filing: RRK2005100093

Navigation menu