Alpha Networks 2520090401-1 WiMAX MiniPCI Card User Manual User s Manual
Alpha Networks Inc. WiMAX MiniPCI Card User s Manual
Manual
tia 802.16e Mini-card Module fid en Manual v1.00 om pa ny on Product Model Name: WMX-MC01 Version: 0.1 2008/09/12 This document contains confidential proprietary information and is the property of Alpha Networks Corporation. The contents of this document may not be disclosed to unauthorized persons without the written consent of Alpha Networks Corporation. Alpha Networks Proprietary and Confidential Information Contents 1.0 SCOPE....................................................................................................................................................................1 1.1 DOCUMENT ...........................................................................................................................................................1 1.2 PRODUCT FEATURES ..............................................................................................................................................1 2.0 REQUIREMENTS.................................................................................................................................................1 om pa ny on fid en tia 2.1 FUNCTIONAL BLOCK DIAGRAM ..............................................................................................................................1 2.2 GENERAL REQUIREMENTS ......................................................................................................................................1 2.2 GENERAL REQUIREMENTS ......................................................................................................................................2 2.2.1 IEEE 802.16e Section....................................................................................................................................2 2.2.2 General Section.............................................................................................................................................2 2.3 COMPATIBILITY REQUIREMENTS.............................................................................................................................3 2.4 REGULATORY REQUIREMENTS ................................................................................................................................3 2.5 REQUIREMENTS OF RELIABILITY, MAINTAINABILITY AND QUALITY..........................................................................3 2.6 ENVIRONMENTAL REQUIREMENTS ..........................................................................................................................3 Alpha Networks Proprietary and Confidential Information ii 1.0 Scope 1.1 Document This document is to specify the product requirements for 802.16e Mini-Card Module. This Card is based on Sequans 1130/1140 chipset that complied with IEEE 802.16e standard at 2.5GHz band. en tia 1.2 Product Features 2.0 Requirements The following sections identify the detailed requirements of the 802.16e Mini-Card Module. fid 2.1 Functional Block Diagram 40MHz Oscillator on 12MHz 32.768KHz 40MHz CLK Pin 5 Pin 7 PERST# Tx1N TxB/IQ RxA/IQ Balun LPF Rx1P Transceiver Rx1N SQN1140 Balun RxB/IQ Tx2N Balun Rx2N IPEX Connector HWS 466 Tx0 LPF IPEX SPDT Connector Rx2P AND SPDT PA Tx2P Pin 22 MAC/BB SQN1130 PA Tx1P TxA/IQ ny Pin 3 RFDATA7 Network LED RFDATA6 IDL_EN RFDATA1 SPI_ ADDR_BYTE_SEL PLL pa Expresscard connector USB I/F Internal Logic USB port MII I/F Balun HWS 466 Tx1 UART SDRAM MT48H8M16LF 128 M Bit A[12:0] D[15:0] Serial Flash M25P64 64Mbit Serial EEPROM AT25256A JTAG om Reset IC Alpha Networks Proprietary and Confidential Information 2.2 General Requirements 2.2.1 IEEE 802.16e Section 2.2.1.3 2.2.1.4 2.2.1.5 2.2.1.6 2.2.1.7 2.496GHz to 2.69GHz for licensed band Depends on the limitation of country regulatory TDD For profile 3A, support 5MHz and 10MHz bandwidth Typical RF Output Power (Tolerance +-2dB) at each modulation type and at room Temp. 25degree C and 4.2V 23 dBm at 16QAM Typical Sensitivity for 5MHz Bandwidth (AWGN) at which Bit Error Rate = 10-6 and at room Temp. PUSC CTC-QPSK -1/2 -91.5 PUSC CTC-QPSK -3/4 -88.1 PUSC CTC-16QAM-1/2 -85.8 PUSC CTC-16QAM-3/4 -81.7 PUSC CTC-64QAM-1/2 -80.6 PUSC CTC-64QAM-2/3 -77.5 PUSC CTC-64QAM-3/4 -76.4 PUSC CTC-64QAM-5/6 -74.5 FUSC CTC-QPSK -1/2 -91.4 FUSC CTC-QPSK -3/4 -88.0 FUSC CTC-16QAM-1/2 -85.7 FUSC CTC-16QAM-3/4 -81.6 FUSC CTC-64QAM-1/2 -80.5 FUSC CTC-64QAM-2/3 -77.4 FUSC CTC-64QAM-3/4 -76.3 FUSC CTC-64QAM-5/6 -74.4 om pa ny on 2.2.1.8 IEEE 802.16e QPSK, 16QAM, 64QAM, OFDMA Standard Radio and Modulation Schemes Operating Frequency Channel Numbers Duplexing Modes Channel Bandwidth Transmitter Output Power at each Antenna Connector Receiver Sensitivity at each Antenna Connector tia 2.2.1.1 2.2.1.2 Detailed Description en Feature fid Typical Sensitivity for 10MHz Bandwidth (AWGN) at which Bit Error Rate = 10-6 and at room Temp. PUSC CTC-QPSK -1/2 -88.5 PUSC CTC-QPSK -3/4 -85.1 PUSC CTC-16QAM-1/2 -82.8 PUSC CTC-16QAM-3/4 -78.7 PUSC CTC-64QAM-1/2 -77.6 PUSC CTC-64QAM-2/3 -74.5 PUSC CTC-64QAM-3/4 -73.4 PUSC CTC-64QAM-5/6 -71.5 FUSC CTC-QPSK -1/2 -88.4 FUSC CTC-QPSK -3/4 -85.0 FUSC CTC-16QAM-1/2 -82.7 FUSC CTC-16QAM-3/4 -78.6 FUSC CTC-64QAM-1/2 -77.5 FUSC CTC-64QAM-2/3 -74.4 FUSC CTC-64QAM-3/4 -73.3 FUSC CTC-64QAM-5/6 -71.4 2.2.2 General Section Feature Detailed Description Alpha Networks Proprietary and Confidential Information 2.2.2.3 Wireless transmission PHY Operating Voltage Current Consumption Form Factor 2.2.2.4 2.2.2.5 2.2.2.6 Min-Card with USB2.0 I/F and MII I/F ( MII mac mode only ) U.F.L & SMA Plug Re ve rs e compatible connector Support 2X2 MIMO 3.3 VDC +/- 5% < TBD Non-standard size ( 66 X 30 mm ) 2.3 Compatibility Requirements This device passes the following compatibility requirements. 2.3.1 2.3.2 WiMax Physical Layer and Functionality Detailed Description en Feature Conformable with WiMAX Forum Wave II certification Meet Alpha Networks Engineering Test Plan and Test Report 2.4 Regulatory Requirements Feature Detailed Description TBD on 2.4.1 fid Interface Antenna Type tia 2.2.2.1 2.2.2.2 2.5 Requirements of Reliability, Maintainability and Quality Feature 2.5.1 2.5.2 2.5.3 MTBF Maintainability Quality Detailed Description Mean Time Between Failure > 30,000 hours There is no scheduled preventive maintenance required The product quality is followed-up by Alpha Networks factory quality control system ny 2.6 Environmental Requirements Feature 2.6.1 Operating Temperature Conditions Non-Operating Temperature Conditions Operating Humidity conditions Non-Operating Humidity Conditions 2.6.2 om 2.6.3 pa The product is capable of continuous reliable operation when operating in ambient temperature of 0 ℃ to 45 ℃. Neither subassemblies is damaged nor the operational performance is degraded when restored to the operating temperature after exposing to storage temperature in the range of –20 ℃ to +75 ℃. The product is capable of continuous reliable operation when subjected to relative humidity in the range of 10% and 90% noncondensing. The product is not damaged nor the performance is degraded after exposure to relative humidity ranging from 5% to 95% noncondensing 2.6.4 Detailed Description Alpha Networks Proprietary and Confidential Information Federal Communication Commission Interference Statement Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. en tia This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: fid This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. on FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 30cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. ny Due to the essential high output power natural of WiMAX device, use of this device with other transmitter at the same time may exceed the FCC RF exposure limit and such usage must be prohibited (unless such co-transmission has been approved by FCC in the future). pa FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. om This device is intended only for OEM integrators under the following conditions: 1) The antenna must be installed such that 30 cm is maintained between the antenna and users, and 2) The transmitter module may not be co-located with any other transmitter or antenna, 3) For all products market in US, OEM has to limit the operation frequencies in 2496MHz – 2690MHz by supplied firmware programming tool. OEM shall not supply any tool or info to the end-user regarding to Regulatory Domain change. 4) This module may be used only for a WiMAX user station as regulated in US CFR part 27.50 (h)(2). As long as 4 3 conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed (for example, digital device emissions, PC peripheral requirements, etc.). IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered Alpha Networks Proprietary and Confidential Information valid and the FCC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization. End Product Labeling This transmitter module is authorized only for use in device where the antenna may be installed such that 30cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following: “Contains FCC ID: RRK2520090401-1”. Manual Information To the End User om pa ny on fid en tia The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user’s manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual. Alpha Networks Proprietary and Confidential Information
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Encryption : Standard V4.4 (128-bit) User Access : Print, Copy, Extract, Print high-res Author : sam Create Date : 2009:07:30 17:46:46+08:00 Modify Date : 2009:07:30 08:12:37-07:00 Has XFA : No XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Creator Tool : pdfFactory Pro www.ahasoft.com.tw/FinePrint Metadata Date : 2009:07:30 08:12:37-07:00 Format : application/pdf Creator : sam Title : User's Manual.doc Producer : pdfFactory Pro 3.10 (Windows XP Professional Chinese) Document ID : uuid:b8d6b28b-3174-400d-9ad4-98a5e7c3c9dc Instance ID : uuid:ee80952a-679a-4233-b81f-858f01248fe6 Page Count : 7EXIF Metadata provided by EXIF.tools