Alpha Networks NECNP02LM Wireless LAN Unit User Manual NP02LM UserMan rev1

Alpha Networks Inc. Wireless LAN Unit NP02LM UserMan rev1

NP02LM_UserMan_rev1

Download: Alpha Networks NECNP02LM Wireless LAN Unit User Manual NP02LM UserMan rev1
Mirror Download [FCC.gov]Alpha Networks NECNP02LM Wireless LAN Unit User Manual NP02LM UserMan rev1
Document ID1311637
Application IDMSeK0VErH9oGjCh3Hou1Yw==
Document DescriptionNP02LM_UserMan_rev1
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize28.45kB (355587 bits)
Date Submitted2010-07-15 00:00:00
Date Available2010-07-15 00:00:00
Creation Date2010-07-12 21:45:34
Producing SoftwareAcrobat Distiller 6.0.1 (Windows)
Document Lastmod2010-07-14 17:26:38
Document TitleMicrosoft Word - NP02LM_InstallGuide_PJ_EN20100712.doc
Document CreatorPScript5.dll Version 5.2.2
Document Author: 1139010529968

Wireless LAN Unit
Installation Guide
Model: NP02LM
NEC Display Solutions, Ltd. 2010
FCC Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference and (2) this device must accept any
interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate this equipment.
IEEE 802.11b or 802.11g operation of this product in the U.S.A. is firmware-limited to
channels 1 through 11.
IMPORTANT NOTE:
This transmitter must not be co-located or operating in conjunction with any other antenna
or transmitter.
This equipment complies with FCC RF radiation exposure limits set forth for
an uncontrolled environment. This device and its antenna must not be
co-located or operating in conjunction with any other antenna or
transmitter.
“To comply with FCC RF exposure compliance requirements, this grant is
applicable to only Mobile Configurations. The antennas used for this
transmitter must be installed to provide a separation distance of at least
20 cm from all persons and must not be co-located or operating in
conjunction with any other antenna or transmitter.”
This Class B digital apparatus complies with Canadian RSS-210.
Cet appareil numérique de la Classe B est conforme à la norme CNR-210 du Canada.
Industry Canada Statement
This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the
following two conditions:
1) this device may not cause interference and
2) this device must accept any interference, including interference that may cause undesired
operation of the device
以下警語適用台灣地區:
經型式認證合格之低功率射頻電機,非經許可,公司、商號或使用者均不得擅自變更頻率、加大功率
或變更原設計之特性及功能。
低功率射頻電機之使用不得影響飛航安全及干擾合法通信;經發現有干擾現象時,應立即停用,並改
善至無干擾時方得繼續使用。前項合法通信,指依電信法規定作業之無線電通信。低功率射頻電機須
忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。
Table of Contents
1.
Introduction ...............................................................................................................................5
2.
Connecting to a Wireless LAN ................................................................................................6
3.
Technical Specifications..........................................................................................................7
1. Introduction
Thank you purchasing the Wireless LAN Unit NP02LM series (Wireless LAN Unit).
Set the Wireless LAN Unit in the NEC Projector (described below) for use.
Refer to the user’s manual that comes with the projector for installation or removal
procedures and for how to set the wireless LAN.
● Parts Included
・Wireless LAN Unit ........................ 1
・Important Information (this document) ........ 1
● Supported Projector
Wireless LAN Unit supports the following NEC projector.
NP-M350X
NP02LM Series offers performance comparable to an Ethernet Local Area Network (LAN) system,
without the limitations of network cables. It allows you to connect your computer to a Local Area
Network from anywhere within the wireless coverage area. It also enables you to roam throughout
the network while remaining connected to the LAN.
2. Connecting to a Wireless LAN
The Wireless LAN Unit also provides a wireless LAN connection. To use a wireless LAN connection,
you are required to assign an IP address to the projector.
Important:
• If you use the projector with the USB Wireless LAN Unit in the area where the use of wireless
LAN equipment is prohibited, remove the USB Wireless LAN Unit from the projector. (→ page 143)
• Buy the appropriate USB Wireless LAN Unit for your country or area.
NOTE:
• The green LED on the USB Wireless LAN Unit flashes to show that the USB Wireless LAN Unit is
working.
• Your computer’s wireless LAN adapter (or unit) must be complied with Wi-Fi (IEEE802.11b/g/n)
standard.
Flow of Setting Wireless LAN
Step 1: Connect the computer to the projector via wired LAN. (→ page xx) Use the computer’s
browser to display the projector’s HTTP server. (→ page xx)
Step 2: Attach the USB Wireless LAN Unit to the projector. (→ page xx)
Step 3: Use an HTTP server to set the wireless LAN. (→ page xx) Access the HTTP server
function to set [NETWORK SETTINGS] → [SETTINGS] → [WIRELESS] → [EASY CONNECTION] ,
[PROFILE1] or [PROFILE2].
NOTE:
• To use the HTTP server function, the projector must be connected to a network. First use the
wired LAN to connect the projector to a network and then use the HTTP server to set the wireless
LAN.
• After setting the wireless LAN by using the HTTP server, set [NETWORK SETTINGS] →
[SETTINGS] → [WIRED] → [DISABLE]
When switching to set on the projector after connecting to the wireless LAN:
Use the menu to set the wireless LAN connection for the projector. (→ page xx)
Select [DISABLE], [EASY CONNECTION] , [PROFILE1] or [PROFILE2] you set from the HTTP
server.
Attaching the USB Wireless LAN Unit
NOTE:
• The USB Wireless LAN Unit must be inserted into the USB Wireless LAN Unit port in the correct
direction. It cannot be inserted in the reverse direction. If the USB Wireless LAN Unit is inserted in
the reverse direction with excessive force applied, the USB port may break.
• Before touching the USB Wireless LAN Unit, touch a metallic object (such as a door knob or
aluminum window frame) to discharge the static electricity from your body.
• Always insert or remove the USB Wireless LAN unit when the main power is turned off. Failure to
do so may cause projector malfunction or damage to the USB wireless LAN unit. If the projector will
not work correctly, turn off the projector, disconnect the power cord, and then connect it again.
• Do not insert other USB devices into the USB Wireless LAN unit port. Do not insert the USB
Wireless LAN unit into the USB (PC) port (Type B).
Prepare a Phillips screw driver beforehand.
1. Press the POWER button to turn off the
projector and set it into standby condition, and
disconnect the power cord.
2. Remove the USB (LAN) port cover. Loosen
the screw securing the port cover. • The screw
is not removable.
3. Slowly insert the USB Wireless LAN Unit into
the USB (LAN) port. Remove the cap from the
USB Wireless LAN Unit, and then insert it with
the surface (side of indicator) facing outward.
Keep the cap for later use.NOTE: Do not force
to insert the USB Wireless LAN Unit.
4. Put the USB (LAN) port cover back into place.
Insert the catch of the USB (LAN) port cover
into the groove of the projector cabinet, and
then tighten the screw to secure the port cover.
To remove the USB Wireless LAN Unit,
disconnect the power cord and use the above
procedure.
NOTE:
• The green LED on the USB Wireless LAN
Unit flashes to show that Wireless LAN Unit is
working. If the USB Wireless LAN Unit is
incorrectly attached, the blue LED will not flash.
• Do not press the button on the USB Wireless
LAN Unit. The button will not work with this
model.
2
NETWORK SETTINGS of Wireless LAN Unit
4
Setting up the Projector for a Wireless LAN Connection (with the Wireless LAN Unit equipped)
[WIRLESS LAN]
Hints on How to Set Up LAN Connection
To set up the projector for a LAN connection:Access the HTTP server function to display the web
browser (→ page xx) and select [NETWORK SETTINGS] → [SETTINGS] → [WIRELESS LAN] →
[PROFILE 1] or [PROFILE 2].Two settings can be set for the USB Wireless LAN Unit.Next select
[SETTINGS] for your selected profile, and set [ENABLE] or [DISABLE] for [DHCP], [IP ADDRESS],
[SUBNET MASK], and [GATEWAY]. Last click [SAVE]. To reflect changes, click the [SETTING] tab
and then click [APPLY]. (→ page xx)
To recall LAN settings stored in the profile number:Use [PROFILE 1] or [PROFILE 2] set on the
HTTP server, from the projector’ menu, select [SETUP] → [WIRELESS LAN] → [PROFILE] →
[PROFILE 1] or [PROFILE 2]. Last select [OK] and press the ENTER button. (→ page xx)
To connect a DHCP server:From the projector menu, select [SETUP] → [WIRED LAN] →
[SETTINGS] → [DHCP] → [ON] and press the ENTER button. To specify IP address without using
the DHCP server, use the HTTP server function. (→ page xx)
To set only for wireless LAN (NETWORK TYPE and WEP/WPA):Access the HTTP server function
to display the web browser (→ page xx) and select [NETWORK SETTINGS] → [SETTINGS] →
[WIRELESS LAN] → [PROFILE 1] or [PROFILE 2].Make necessary settings for [SETTINGS] and
click [SAVE].From the projector menu, select [SETUP] → [WIRELESS LAN] → [PROFILE] →
[PROFILE 1] or [PROFILE 2].
To select an SSID:Access the HTTP server function to display the web browser (→ page xx) and
select [NETWORK SETTINGS] → [SETTINGS] → [WIRELESS LAN] → [CONNECTION] → [SITE
SURVEY] and select the ID.If you do not use [SITE SURVEY], type the SSID in [CONNECTION]
and select [INFRASTRUCTURE] or [AD HOC]. (→ page xx)
To receive lamp replacement time or error messages via e-mail:Access the HTTP server function to
display the web browser (→ page xx) and select [NETWORK SETTINGS] → [ALERT MAIL], and
set [SENDER’S ADDRESS], [SMTP SERVER NAME], and [RECIPIENT’S ADDRESS]. Last, click
[SAVE]. (→ page xx)
To execute [EASY CONNECTION] using Image Express Utility Lite:The [EASY CONNECTION] is
a mode that can abbreviate the troublesome LAN settings when using the Image Express Utility Lite
and connecting the PC and projector via a wireless LAN.The Image Express Utility LIte is contained
on the supplied NEC Projector CD-ROM.
To use [EASY CONNECTION], access the HTTP server function to display the web browser (→
page xx) and select [NETWORK SETTINGS] → [SETTINGS] → [WIRELESS LAN] → [EASY
CONNECTION]. Next select [SETTINGS] → [CHANNEL]. Last click [SAVE].From the projector
menu, select [SETUP] → [WIRELESS LAN] → [PROFILE] → [EASY CONNECTION].

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
XMP Toolkit                     : 3.1-701
About                           : uuid:3853089c-2b2f-430d-9c00-0caca4129ebd
Producer                        : Acrobat Distiller 6.0.1 (Windows)
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2010:07:14 17:26:38+08:00
Create Date                     : 2010:07:12 21:45:34+09:00
Metadata Date                   : 2010:07:14 17:26:38+08:00
Document ID                     : uuid:e7388904-c2cf-408e-91a7-6a7798f3a9f7
Instance ID                     : uuid:c5a9f2cc-e8e4-454b-a2ff-ec15749ed67a
Format                          : application/pdf
Title                           : Microsoft Word - NP02LM_InstallGuide_PJ_EN20100712.doc
Creator                         : 1139010529968
Has XFA                         : No
Page Count                      : 12
Author                          : 1139010529968
EXIF Metadata provided by EXIF.tools
FCC ID Filing: RRK-NECNP02LM

Navigation menu