Alpha Networks TMJB010 Digital Media Player User Manual English QIG

Alpha Networks Inc. Digital Media Player English QIG

Manual

Trend Micro Incorporated
Digital Media Player QIG
Jewelry Box
Model Name:TMJB-010
Package Contents
If any of the below items are missing,please content your reseller.
Jeweley Box AC adapter Ethernet cable QIG
USB Connector
SD card Reader
Pairing Button
IR Lens
LED HDMI Connector
Reset Button
Ethernet plug
AC
Wireless Button
LEDs
Physical & Environmental
Feature Detailed Description
Operating Temperature 0°C to +40°C
Storage Temperature -30°C to +60°C
Humidity(operation) 20% to 80% Non-condensing
Humidity (storage) 5% to 95% Non-condensing
Jewelry Box Wireless and Ethernet Setting
Wireless Setting Ethernet Setting
1.Press WPS Button Plug the Ethernet cable to the Ethernet
plug
2.Press the Wireless Button
The Blue LED will light up when the Setup is complete.
Importing from SD Card/Camera
LED Color behavior Status
Blue LED Normal Usage
Blue LED light slowly Booting
Data Processing
Right and Left LED light slow Network Connecting
Initial Setting
Blue LED light fast Importing From SD Card/Camera
Red LED Error
Import from Camera Import from SD card
Watch the photos on Television
Use HDMI cable to connecting the Device and Television, then change the input to HDMI.
Federal Communication Commission Interference Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate this equipment.
This transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.
Turn on the power of Camera¸ and plug the
HDMI cable between Camera and Jewelry
Box. The photos will import to the Device
automatically.
When the rate Blue LED light get slowly,
camera can be take off.
Plug SD card into SD card Reader, The
photos will import to the Device
automatically.
When the rate Blue LED light get slowly,
camera can be take off.
Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20cm
between the radiator & your body.
Note: The country code selection is for non-US model only and is not available to all US model. Per
FCC regulation, all WiFi product marketed in US must fixed to US operation channels only.
Industry Canada statement:
This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired operation.
Ce dispositif est conforme à la norme CNR-210 d'Industrie Canada applicable aux appareils radio
exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif
ne doit pas produire de brouillage préjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu,
y compris un brouillage susceptible de provoquer un fonctionnement indésirable.
Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the
radiator & your body.
Déclaration d'exposition aux radiations:
Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un
environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm
de distance entre la source de rayonnement et votre corps.

Navigation menu