Alpha Networks WLAPGMNA1 802.11b/g Wireless Access Point User Manual WLAPGMN Manual en revA indd

Alpha Networks Inc. 802.11b/g Wireless Access Point WLAPGMN Manual en revA indd

Manual

User Manual802.11b/g Wireless Access PointCG-WLAPGMN
WLAPGMN User Manual11ContentsRegulatory Compliance............................................................................................... 21. Product Introduction................................................................................................ 3  1.1 Packing Content................................................................................ 3  1.2 Hardware Description..................................................................... 3  1.3 Features................................................................................................ 42. Hardware Installation............................................................................................... 5  2.1 Environment Requirements.......................................................... 5  2.2 Install the product............................................................................ 5  2.3 Connect to WLAN adapter............................................................. 63. Setting WLAN adapter.............................................................................................. 7  3.1 Setting up the Centrino in Win-XP(SP1) OS............................. 7  3.2 Setting up the Centrino in Win-XP(SP2) OS............................. 8  3.3 Setting up corega wireless adapter......................................... 104. Setting Utility Program......................................................................................... 11  Step1. Setting TCP/IP............................................................................. 11  Step2. Setting Web browser............................................................... 12  Step3. Setting Utility Program........................................................... 14  4.1 Status.................................................................................................. 15  4.2  Wizard (Quick Installation)......................................................... 15  4.3  Advanced.......................................................................................... 17    4.3.1 Configuration.......................................................... 17    4.3.2 Management.......................................................... 27    4.3.3 Maintenance........................................................... 28  4.4  Statistics............................................................................................ 30  4.5  Reboot............................................................................................... 305. FAQ............................................................................................................................... 316. Sepcification............................................................................................................. 34
WLAPGMN User Manual22222FCC Interference StatementThis device complies with Part 15 of FCC rule. Operation is subject to the following two conditions:• This device may not cause harmful interference.• This device must accept any interference received, including interference that may cause undesired operation.This Broadband Wireless Router has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used according to the instructions, may cause harmful interference to radio communications. However, there is no guar-antee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception, which isfound by turning the equipment off and on, the user is encouraged to try to cor-rect the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment or device.• Connect the equipment to an outlet other than the receiver’s.• Consult a dealer or an experienced radio/TV technician for assistance.FCC Radiation Exposure StatementThis equipment complies with FCC radiation exposure limits set forth for an uncon-trolled anvironment. This equipment should beinstalled and operated with minimum distance 20cm between the radiator and your body.Regulatory Compliance
333WLAPGMN User Manual33corega WLAPGMN is a high speed Wireless Access Point, which support IEEE 802.11b/g standard with speed up to 108 Mbps provide higher data rate and through is suitable for user who has high  speed transmission requirement.  corega WLAPGMN supports enhanced security Functions to protect your PCs from outside intruders.  Its dual diversity antenna for using in multi-path environment to enhance the transmission quality.1.1 Packing Content- Wireless 108 Mbps Access Point- Power Adapter- Ethernet Cable- Product Stand- Wall Mount Kits- Manual  * Please verify the packing content the following items, if anything loss or damage, please contact your local distributor.1.2 Hardware Description                              [Front Panel]                           [Back Panel]               132                     4567              1Product Introduction
WLAPGMN User Manual4441. LAN LED (Green)        On: Connected        Blink: Transmitting or receiving data        OFF: Disconnected2. WLAN LED (Green)    ON: Connected    Blink: Transmitting or receiving data    OFF: Disconnected3. Power LED(Green) Indicate power configuration4. Detachable Antenna Connector5. LAN port    Be connected with PC or Hub6. Init buttom    Press the buttom will recover to initial configuration7. DC IN Socket Connect with power adapter1.3 Features•  Compatible with IEEE 802.11b and 802.11g standard.•  Allows auto fallback data rate for reliability, optimized throughput and transmission range•  Supports 64/128/152-bit WEP for security•  Support Super G mode (speed up to 108 Mbps) to provide the higher data rate and throughput (Target throughput is 25M~32M)•  Web-based configuration and management•  Dual diversity antennas for the multi-path environment•  Supports enhanced security –WPA, WPA-PSK/EAP•  Supports Wireless Partition function•  Supports 10/100 Mbps Ethernet port•  Type approval compliant with USA, Japan, and Europe regulation•  Support WDS function (Wireless bridge (PtoP , PtoMP), AP repeater, AP client)
55WLAPGMN User Manual52.1 Environment Requirements• A computer has configured TCP/IP• An availabe RJ-45 port on an Ethernet Hub/Switch/Router/Modem• A WLAN adapter which compliance with IEEE802.11g, IEEE802.11b, or IEEE802.11 standard.• Microsoft Internet Explorer 4.0 or Netscape Navigator 4.78 above browser.2.2 Install the product(1) Prepare a hub/router which has connected with ADSL cable and PC.(2) Insert the cable connector into the LAN port of WLAPGMN.(3) Insert the other connctor of the cable into the Hub or Router’s LAN port.(4) Insert the power connector  into WLAPGMN.(5) Insert the power adapter into socket, meanwhile you  will see the Power and LAN LED  blink.connect to InternetHub/RouterPCLAN portPower InputPower Adapter2Hardware Installation
WLAPGMN User Manual6662.3 Connect to WLAN adapterFirst at all, you have to prepare a WLAN adapter which has been installed in computer, and verify the setting of the WLAN adapter are the same as WLAPGMN, which default settings as below:• Communication Mode: Infrastructure • ESSID: corega• Channel: 6• WEP: OFF• WPA: OFFHub/SwitchInternet
77WLAPGMN User Manual7This section lead you to configure  the settings of wireless LAN adapters installed in other computers to connect with WLAPGMN. There’re three situations show as below:3.1 Setting up the Centrino in Win-XP(SP1) OS1. From the [Start Menu], select [Settings] -> [Control Panel]-> [Net-work]-> double click [Wireless network connection].2. It will show up the [Wireless Network Connection] screen, select  [corega] in the listing of available wireless networks, => check [Allow me to connect...] box => click [Connect].* Note:  1. “corega” is the default ESSID of WLAPGMN, once ESSID in WLAPGMN has been changed, the ESSID in WLAN adapter has to be changed, too.2. If the WLAPGMN has enabled security function, it will show below screen, you have to type the key which is consistant with WLAPGMN, => click [Connect].3Setting WLAN Adapter
WLAPGMN User Manual883. Setting completed, it is available to surf on internet through WLAPGMN. 3.2 Setting up the Centrino in Win-XP(SP2) OS1. From the [Start Menu], select [Settings] -> [Control Panel]-> [Net-work]->double click [Wireless network connection].2. In following screen, please select [corega] in the listing of available wireless networks, => click [Connect].
9WLAPGMN User Manual93. If the WLAPGMN has not enable the security function, it will show up below screen, click [Connect Anyway] to continue.* Note:  1. “corega” is the default ESSID of WLAPGMN, once ESSID in WLAPGMN has been changed, the ESSID in WLAN adapter has to be changed, too.2. If the WLAPGMN has enabled security function, it will show below screen, you have to type the key which is consistant with WLAPGMN, => click [Connect].3. Setting completed, it is available to surf on internet through WLAPGMN now.
WLAPGMN User Manual1010103.3 Setting up corega WLAN adapterFollowing steps were taken corega WLCB54GS for instance:1. Double click     icon on system tray, and it will show up the utility screen. If there’s no   icon appears on system tray, please press [Start] => [Programs]=>[corega CG-WLCB54GS]=> [Wireless LAN Utility].2. Please double click [corega] ESSID from [Available WLANs], then you’ll see it will be added  in [Preferred WLANs] listing.3. Now click [OK] then available to surf on  internet by WLAPGMN.
1111WLAPGMN User Manual11This section take Windows XP for instance. Before starting, you have to set up TCP/IP and web browser first. The steps as below:Step1. Setting TCP/IP 1. From the [Start Menu], select [Settings] => select [Control Panel]=>select [Network]=> select [Connections], => click and press right button of the mouse, and select [properties].2. In [General] tab, Please select [Internet Protocol (TCP/IP)]=> click [Properties]. 4Setting Utility Program
WLAPGMN User Manual12123.  Select both [Use the following IP address] and [Use the follow-ing DNS server addresses] (Recommended). Enter the IP address between 192.168.1.1~192.168.254 range (except 192.168.1.230); submask is 255.255.255.0=>click [Advanced].4. Return back to [Local Area Connection Properties] screen => click [OK] to close it.Step2. Setting Web browser 1. Double click [Internet Explorer] (This section take IE6.0 for in-stance)=> click [tools], and select [Internet Options.].
13WLAPGMN User Manual132. Click [Connections] tab=>select [LAN Settings].3. Please uncheck the three items in below screen (don’t select any-one)=> click [OK].Uncheck these 3 items---->
WLAPGMN User Manual14144. Please click [OK] to close the [Internet Options] screen.Step3. Setting Utility Program To make sure successful setting, please exit the virus and firewall pro-gram before setting the products. After setting completed, they can be opened again. 1. Double click the web browser (this section take IE6.0 for instance).2. Type “192.168.1.230”  in the address tab =>press enter.3. It shows up the prompt box, type “root” in [user name] tab, and keep the [password] tab empty => click [OK].
15WLAPGMN User Manual15You are now in the utility program for setting, details as below:4.1 Status1. Select [Stauts], it will display all status for corega WLAPGMN.4.2  Wizard (Quick Installation)This section will lead you quick installation.1. Select [Wizard] => Press [Next].
WLAPGMN User Manual16162. You will see [SSID] and [Channel] in the following screen, you may change it or not, but recommanded to change it to make sure the security.*Note: the default SSID(ESSID) is "corega", and default channel is 6.3. Recommanded to click [Enable] from WEP setting screen, => select [64Bits], [128Bits], or [152Bits]=> key in password in Key1 tab, => click [Next]. * Note: 1. Please enter 10 characters for 64Bit; 26 characters for 128Bit or 32 characters for 512Bit (number 0~9, and letters a~f).2. You may aslo keep [Disable] default setting and click [Next] to skip the step.
17WLAPGMN User Manual174. Setting completed, please press [Reboot] for saving the changes.5. It will show up Saving screen, few seconds later, it will return to re-login prompt box.6. Change the same ESSID for all WLAN adapters which connected to WLAPGMN.4.3  Advanced4.3.1 Configuration<IP Address>1. Click[Advanced]->[Configuration]-[IP Address], once configure completed, please click [Apply].
WLAPGMN User Manual1818Item DescriptionMAC Address Display corega WLAPGMN’s Mac addressGet IP From There are 2 selections: Manual and DHCP* Default is [Manual].IP Address Default is [192.168.1.230].Subnet Mask Default is [255.255.255.0].Default Gateway Default is [192.168.1.1].* Note: If any setting has been changed, you have to click [Reboot]->[Restart] to save the changes.<WLAN Parameter Settings> 1.  Click [Advanced]->[Configuration]-[WLAN Parameter Settings], when configure completed, please click [Apply].  Item DescriptionESSID Default is [corega].SSID Broadcast You may select [Enable] to hide your AP, or [Disable] to open your AP.Frequency Default is [2.437 GHz].Channel Default is [6].DataRate Display the DataRate between computer (WLAN adapter) and WLAPGMN
19WLAPGMN User Manual19Beacon Interval (20-1000) Default is [100], recommanded don't change it.DTIM (1-255) Default is [1], recommand don't change it.Fragmentation Length (256~2346)Enter even numbers.Default is [2346], recommanded don't change it.RTS Length (256~2346) Default is [2346], recommanded don't change it.Transmit Power Default is [full].Super ModeIf your Wireless LAN Card supports Super G Mode transmit rate. You can use this function to increase wireless through-put. Default is [Disabled].Radio Wave Default is [On].eXtended Range Default is [Disabled].* Note: If any setting has been changed, you have to click [Reboot]->[Restart] to save the changes.<Security Setttings>A. Setting WEP1.  Click[Advanced]->[Configuration]->[Security Settings]->select [Shared Key] from [Authentication] tab->setting [Key Table], once configure completed, click [Apply].
WLAPGMN User Manual2020Item SpecificationAuthenticationOnce choosing WEP must select [Shared Key]; choosing WPA will directly click [OK] to go next step.* Default is [Open System].Vaild Key Select one of default WEP Key groups First~Fourth.First Key ~ Fourth KeyPlease  enter  10  characters for  64Bit;  26  characters  for 128Bit or 32 characters for 512Bit (number 0~9, and let-ters a~f).* Note: If any setting has been changed, you have to click [Reboot]->[Restart] to save the changes.B. Setting WPAWPA uses TKIP (Temporal Key Integrity Protocol) to change the temporal key every 10,000 packets (a packet is a kind of message transmitted over a network.) This ensures much greater security than the standard WEP security. There are two selections-[PSK] and [EAP] :* [WPA-PSK] is suitable for home user. 1.  Click[Advanced]->[Configuration]->[Security Settings]->select [WPA] from [Authentication] tab-> click [Apply].
21WLAPGMN User Manual212. Enter 9~63 characters in [PassPhrase]->select [Cipher Type], once configure completed, click [Apply].* Note:  1. Group Key Update Interval: enter a number to indicate the key exchanged per minute.2. If any setting has been changed, you have to click [Reboot]->[Restart] to save the changes.*[WPA-EAP]: is suitable for enterprise with RADIUS server. 1.  Click[Advanced]->[Configuration]->[Security Settings]->select [WPA] from [Authentication] tab-> click [Apply].
WLAPGMN User Manual22222. Enter 9~63 characters in [PassPhrase]->select [Cipher Type], setting [Security Server Settings] table, once configure completed, click [Apply].* Note: If any setting has been changed, you have to click [Reboot]->[Restart] to save the changes.<Access Control Settings> 1.  Click[Advanced]->[Configuration]-[Access Control Settings], once configure completed, click [Save].
23WLAPGMN User Manual23Item DescriptionControlDisable: Disable the mac address filter function.Accept:Only connect with the mac address which list  the table.Reject:Only conntect with the mac address which list  the table.MAC Address Enter the mac address of the WLAN adapter which connected with computer.(character of 0~9; A~F)* Note: If any setting has been changed, you have to click [Reboot]->[Restart] to save the changes.<AP Mode>1. Access Point ModeClick[Advanced]->[Configuration]-[AP Mode], once configure completed, click [Apply].   * Note: If any setting has been changed, you have to click [Reboot]->[Restart] to save the changes.
WLAPGMN User Manual2424 Hub/SwitchInternet2. P to MP Bridge Mode: each one set the same channel, different ESSID      Click[Advanced]->[Configuration]->[AP Mode]->[PtMP Bridge]->enter Mac Address in [Remote AP MAC Address], once configure completed, click [Apply].* Note: If any setting has been changed, you have to click [Reboot]->[Restart] to save the changes.Hub/SwitchInternet
25WLAPGMN User Manual253. Repeater Mode: each one set the same ESSIDClick[Advanced]->[Configuration]->[AP Mode]->[AP Repeater]->enter Mac Address in [Root AP MAC Address]->configure [Site Survey], once configure completed, click [Apply].* Note: If any setting has been changed, you have to click [Reboot]->[Restart] to save the changes.Hub/SwitchInternetLANBuildingBuilding4. Client ModeClick[Advanced]->[Configuration]->[AP Mode]->[AP Client]-> enter the Mac address->click [Apply].
WLAPGMN User Manual2626* Note: If any setting has been changed, you have to click [Reboot]->[Restart] to save the changes.Hub/SwitchInternet<WLAN Partition>Click[Advanced]->[Configuration]->[WLAN Partition]->check the box, once configure completed, click [Apply].
27WLAPGMN User Manual27* Note: If any setting has been changed, you have to click [Reboot]->[Restart] to save the changes.<Device Information>Click[Advanced]->[Configuration]->[Device Information]->setting [System Name], once configure completed, click [Apply].   * Note: If any setting has been changed, you have to click [Reboot]->[Restart] to save the changes.4.3.2 Management<Administration>Click [Advanced]->[Management]->[Administration], once configure completed, click [Save]. *Notice: 1. If any setting has been changed, you have to click [Reboot]->[Restart] to save the changes.2. Once forget the password, you may click [Maintenance]->[Restore System]=>[Restore] to return to default settings.
WLAPGMN User Manual2828<Misc>Click[Advanced]->[Management]-[Misc], once configure completed, click [Apply].    * Note: If any setting has been changed, you have to click [Reboot]->[Restart] to save the changes.4.3.3 Maintenance<Update Firmware>Click[Advanced]->[Maintaince]->[Update Firmware]->[Browse]=>select the path of the firmware file , =>click [OK].    * Note: If any setting has been changed, you have to click [Reboot]->[Restart] to save the changes.<Configuration File>1. Update file: Click[Advanced]->[Maintaince]->[Configuration File]->[Browse]=>select the path of the file , =>click [OK].2. Download configuration File, click second [OK]. * Note: If any setting has been changed, you have to click [Reboot]->[Restart] to save the changes.<Restart System>
29WLAPGMN User Manual291. Click [Advanced]->[Maintenance]->[Restart System]->all new set-tings will be saved.2. It will show up the Saving screen, several seconds later, it will return to re-login screen.* Note:• This function is the same as [Reboot].• If any setting changes, please run this function to save and apply the changes.<Restore System>1. Click[Advanced]->[Maintaince]->[Restore System]->system will restore to Factory Default Settings.   2. It will show up the Saving screen, few seconds later, it will return to to re-login screen.* Note:• Once you forget the password or want to return to initial status, please run this function.
WLAPGMN User Manual3030304.4  StatisticsThe screen displays the statistics of throughput.  4.5  Reboot1. Click [Reboot]->click [Restart], all new settings will be saved.   2. It will show up the Saving screen, severl seconds later, it will return to re-login screen.* Note:• This function is the same as [Advanced]->[Maintaince]->[Restart System].• If any setting changes, please run this function to save and apply the changes.
3131WLAPGMN User Manual31There are 2 ways for solving your problems:(1) First,  please see following “FAQ” to check your problem.(2) Please go to http://www.corega-asia.com, click “Supports”=>select “Online Customer Support”,  => fill in the form, =>click “submit”.  We’ll reply you as soon as possible. Q1. Can't open the utility program.Ans:1.Verify the computer has configured the TCP/IP, if yes, please verify the setting is correct (Please refer to [4. Step1. Setting TCP/IP]).2.Verify the WLAPGMN installation is correct. (Please refere to 2. [Hardware Installation].)3. Verify the wireless LAN adapter installation is correct. (Please refere to the manual of wireless LAN adapter].)4.Verify the process of Setting Utility Program is correct.(Please refere  chapter 4.)5. Please verify the item [Proxy server] in web browser is unchecked: :6. Uncheck the [Work offline] item in IE6.0, open IE 6.0 => click File => uncheck the [v Work Offline] item.Q2. Computer installed wireless LAN adater can't connect to WLAPGMN.Ans: 1. Keep the WLAPGMN far away from interference(ex:2.4GHz electric equipment).2. Shorten the distance between wireless device, and avoid the barrier,s ex:cement or reinforced concrete wall.3. Verify the setting of wireless LAN adapter is consistent with the WLAPGMN.Ex: Infrastructure mode, ESSID, WEP Key,  Channel, Security(WEP/WPA) settings.4. Verify all the devices(ex: Hub/Router/Modem) wired connected with WLAPGMN are normal running. Q3. How to improve the communication quality?Ans: 1. Move the WLAPGMN away from RC/wood/flagstone/brick/anti-5FAQ
WLAPGMN User Manual3232fire glass wall or door. It is to say to avoid the barriers between WLAPGMN and Wireless LAN adapter.2. Shorten the distance between WLAPGMN and WLAN adapters.3. Adjust the antenna direction.Q4. How to set/change the id and password for Utility Program? Ans: In utility program, Click[Advanced]->[Management]->[Administration], Setting the id and password.Q5. Forgot the Passowrd.Ans: Recommanded to initial the product setting, which method described as next question. Once you initial the product, all settings will return to factory default settings.Q6. How to resore to the default value?A: There are 2 ways to restore: <Press the [Init] button on main unit >On the powering on status of  WLAPGMN =>find the [Init] button on   the back of the main unit=>press it for 5 seconds around =>once the [LAN] and [WLAN] LED are off, release it => few seconds later, you’ll see [LAN] and [WLAN] LED blank =>system has been restored to factory default settings.<Restore by utility>1. Click[Advanced]->[Maintaince]->[Restore System]->system will restore to Factory Default Settings.   2. It will show up the Saving screen, severl seconds later, it will return to to re-login screen.
33WLAPGMN User Manual33* Once you forget the password or want to return to initial status, please run this function.* Details please refer to [chapter 5. FAQ-Q6].Q7. How to get the latest firmware?Ans: Please go to http://www.corega-asia.com, =>click supports >download >select “firmware”,  =>select and click the model which you want to upgrade.  If you upgraded failure, you may restore the utility system to factory default settings, please refer Q6. Q8. How to check the network setting? Ans: If you want to check the IP address and subnet mask or Mac address, you may following steps:<Windows Me/98/95>(1) Press [Start] of the system tray => select [Perform].(2) Enter "winipcfg" in the blank bar=>press [OK].(3) Select the name of WLAN adapter, then it will show up the information regarding the networking setting. If it display error information, =>please press [Release], => Press [Update].<Windows XP/2000 >(1) Press [Start] -> [Programs]-> [Accessories]->[Command Prompt].(2) Enter "ipconfig /all"  => press[Enter], then you will see the networking setting. If it display error information, please enter "ipconfig /renew"=> press [Enter].
WLAPGMN User Manual343434Standard WLAN:IEEE802.11             IEEE802.11b             IEEE802.11gLAN:    IEEE802.3             IEEE802.3u             IEEE802.3xLAN Interface 100BASE-TX/10BASE-T×1 RJ-45 port Frequency Band 2.4~2.5 GHzTransmission method DS-SS/OFDMModulation system IEEE 802.11b: DBPSK, DQPSK, CCKIEEE 802.11g: BPSK, QPSK, 16-QAM, 64-QAM, OFDMMemory Capacity4 MB Flash ROM16 MB SDRAMTransmission speed IEEE802.11g: 6/9/12/18/24/36/48/54/108 MbpsIEEE802.11b:1/2/5.5/11MbpsCoverage Area - Indoors: Up to 100M  (30M@54Mbps)- Outdoors: Up to 300M  (60M@54Mbps)* Environmental factors may adversely affect      wireless signal rangeChannel 1~11 Channels for US/TW1~13 Channels for EU/UK/HKSecurity WEP(64/128/152-bit), WPA-PSK/EAP, Mac address filter, Wireless partitionAntenna Type Dipole antennas,2dBi gain, 2.4GHzPrinted antennas, 0dBi gain, 2.4GHzPower Specification Power requirements: DC 5VCurrent Consumption: 1070 mA (ave.)Power Consumption: 5.35 WSupport OS Windows 95/98/Me/2000/XP(SP1)(SP2)Support Application Microsoft Windows Messenger,MSN Messenger,Net Meeting,Yahoo!Messenger,QuickTime Player,RealOnePlayer, Skype, ICQEnvironment RequirementsOperating Temperature:0~40˚CHumidity:<90% (non-condensing)Storage Temperature:-20~60˚CHumidity:<95% (non-condensing)Physical SpecificationDimension 29.5 (W) × 69.5 (D) × 104 (H) mmCase Material PlasticWeight 92.5 g (main unit)Certification DGT, FCC6Specification
3535WLAPGMN User Manual35corega K.K. designs, develops and markets professional networking products that address the specific needs of small and medium enterprises and home user’s easy-to-use, quality and reliable services of networking solutions requirements.Established in 1986, corega 100% founded by Allied Tel-esis Group in Yokohama, Japan. corega’s core products consists of 10/100/1000 Ethernet products, Wireless Networking Products(802.11 a/b/g series), broadband access routers and other networking peripheral, such as IP camera and PoE Adapter.Thank you again for purchasing corega WLAPGMN Wireless 108Mbps Access Point, Wish you would enjoy the powerful and friendly corega connecting experi-ence!!                    About corega K.K.
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.  These limits are designed to provide reasonable protection against harmful interference in a residential installation.  This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.  However, there is no guarantee that interference will not occur in a particular installation.  If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: -  Reorient or relocate the receiving antenna. -  Increase the separation between the equipment and receiver. -  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -  Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.  FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.  IMPORTANT NOTE: FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance.  This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.  IEEE 802.11b or 802.11g operation of this product in the U.S.A. is firmware-limited to channels 1 through 11.
www.corega-asia.comPN: S30-UM8201-00 Rev.A7F., No. 10, Lane 345, YangGuang St. Nei-Hu Chiu, Taipei City 114, Taiwan R.O.C.TEL:  +886-2-8751-9164   FAX:  +886-2-8751-9174corega Taiwan Inc.

Navigation menu