Alpha Networks WMPN09 802.11n WLAN PCI CARD User Manual for WMP N09 for EMI

Alpha Networks Inc. 802.11n WLAN PCI CARD for WMP N09 for EMI

User Manual

Download: Alpha Networks WMPN09 802.11n WLAN PCI CARD User Manual for WMP N09 for EMI
Mirror Download [FCC.gov]Alpha Networks WMPN09 802.11n WLAN PCI CARD User Manual for WMP N09 for EMI
Document ID1204364
Application IDKVf8O3ZZCMOjpYR3fzFoEQ==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize31.27kB (390926 bits)
Date Submitted2009-11-24 00:00:00
Date Available2009-11-24 00:00:00
Creation Date2017-11-12 07:01:01
Producing SoftwareGPL Ghostscript 9.18
Document Lastmod2017-11-12 07:01:01
Document TitleUser Manual for WMP-N09 for EMI.doc
Document CreatorpdfFactory Pro www.ahasoft.com.tw/FinePrint
Document Author: sam

For
fid
(Atheros AR9223)
en
Wireless Mini PCI Adapter
tia
User Manual
on
Model Number : WMP-N09
om
pa
ny
Revision: 1.3
This document contains confidential proprietary information and is the property of Alpha Networks Inc.. The contents
of this document may not be disclosed to unauthorized persons without the written consent of Alpha Networks Inc..
Alpha Networks Proprietary and Confidential Information
Rev.
Date
Author
Reason for Changes
1.0
1.1
March of 26th, 2008
August of 6th, 2008
Joyce Lin
Amanda Wang
1.2
August of 19th, 2008
Jimmy Yang
•
•
•
•
om
pa
ny
on
fid
en
tia
New released
Revised Tx & Rx output power
Power consumption
Revised Tx power and Rx sensitivity
Revision History
Alpha Networks Proprietary and Confidential Information
ii
Contents
OPERATION MANUAL ..............................................................................................................................................5
TEST UTILITY INSTALLATION:..............................................................................................................................5
1.0 SCOPE....................................................................................................................................................................8
tia
1.1 DOCUMENT ..........................................................................................................................................................8
1.2 PRODUCT FEATURES ............................................................................................................................................8
2.0 REQUIREMENTS.................................................................................................................................................8
on
fid
en
2.1 FUNCTIONAL BLOCK DIAGRAM ............................................................................................................................8
2.2 GENERAL REQUIREMENTS ...................................................................................................................................9
2.2.1 IEEE 802.11b Section....................................................................................................................................9
2.2.2 IEEE 802.11g Section....................................................................................................................................9
2.2.3 IEEE 802.11n Section....................................................................................................................................9
2.2.4 General Section...........................................................................................................................................10
2.3 SOFTWARE REQUIREMENTS ...............................................................................................................................11
2.3.1 Security .......................................................................................................................................................11
2.4 MECHANICAL REQUIREMENTS ...........................................................................................................................11
2.5 COMPATIBILITY REQUIREMENTS .......................................................................................................................11
2.6 REQUIREMENTS OF RELIABILITY, MAINTAINABILITY AND Q UALITY ..................................................................11
2.7 ENVIRONMENTAL REQUIREMENTS .....................................................................................................................11
APPENDIX I:.............................................................................................................................................................13
END PRODUCT LABELING ..................................................................................................錯誤! 尚未定義書籤。
MANUAL INFORMATION TO THE END USER .................................................................錯誤! 尚未定義書籤。
om
pa
ny
INDUSTRY CANADA STATEMENT .....................................................................................錯誤! 尚未定義書籤。
Alpha Networks Proprietary and Confidential Information
iii
C
om
pa
ny
on
fid
en
tia
Operation Manual
Test Utility Installation:
1. Unzip “ ART_v0_7_b27_ar928xALL
2. The utility must run on WinXP or Vista
1. WinXP OS:
en
Enter in the directory: C:\ v0_7_b27_ar928xALL \art_driver\bin\xp
Execute the uninst_old_drv.bat:
Execute the inst_new_drv_xp.bat
tia
Before insert the card, please execute the below instruction at first!!
Hardware Installation:
Vista OS:
fid
Enter in the directory: C:\ v0_7_b27_ar928xALL \art_driver\bin\Vista
Execute the uninst_old_drv.bat:
Execute the inst_new_drv_xp.bat
2. Insert the card, then install the driver, the driver is located at
WinXP OS and Vista OS:
Configuration:
on
C:\ v0_7_b27_ar928xALL \art\bin
1. Enter the DOS command mode, then change the directory to:
C:\ v0_7_b27_ar928xALL \art\bin
Then press enter.
pa
ART TEST MODE:
ny
2. Input the instruction: art \id=2091
1. Once utility is executed, a menu with test options will appear. To run a test, press the character
key that is assigned to the test option.
om
For example, press “c” to run the continuous transmit test, or press “r ” to run the continuous
receive test.
Alpha Networks Proprietary and Confidential Information
l
tia
en
fid
on
ny
om
pa
For example: press “h” to choice single chain or both chains in test mode.
Alpha Networks Proprietary and Confidential Information
2. Continuous Transmit Options:
a. Before the continuous Transmit test, need to press “e” first
The command will load the calibrate data to the EPROM, and then the card can transmit the
target power.
on
fid
en
tia
b. The channel frequency, data rate and output power could be changed in continuous transmit
options. Press “c” to increase the output power, 11g Power ( data rate 6Mbps ) is 18dBm,
11b Power is 17dBm, press ESC to return to the main Test Options menu when finished.
ny
3. Continuous Receive Options
om
pa
Continuous receiver option will put the radio into receive mode to allow for radio
measurement. Press ESC to return to the main Test Option menu when finished.
Alpha Networks Proprietary and Confidential Information
1.0 Scope
1.1 Document
This document is to specify the product requirements for 802.11n Draft 2.0 Mini PCI. This mPCI is based on
Atheros chip that complied with IEEE 802.11n Draft 2.0 from 2.4~2.5GHz, and it is also backward compatible to
comply with IEEE 802.11g and IEEE 802.11b standard to connect your exist 802.11 b/g wireless LAN device.
tia
1.2 Product Features
en
Compatible with IEEE 802.11g high rate standard to provide wireless 54Mbps data rate
Compatible with IEEE 802.11b high rate standard to provide wireless 11Mbps data rate
Compatible with IEEE 802.11n draft standard to provide wireless 300Mbps data rate
Operation at 2.4 ~ 2.4835GHz frequency band to meet worldwide regulations
Dynamic date rate scaling at 6, 9, 12, 18, 24, 36, 48, 54Mbps for IEEE 802.11g
on
fid
Dynamic date rate scaling at 1, 2, 5.5, and 11Mbps for IEEE 802.11b
Dynamic date rate of IEEE 802.11n scaling from MCS – 0 to MCS –15 as shown in Appendix I
Supports WEP, 802.1x, WPA and WPA2 enhanced security
Friendly user configuration and diagnostic utilities
Support Linux driver.
Supports Mini-PCI Type IIIA form factor
2.0 Requirements
om
pa
ny
2.1 Functional Block Diagram
The following sections identify the detailed requirements of the 802.11n Draft 2.0 mPCI.
Alpha Networks Proprietary and Confidential Information
2.2 General Requirements
2.2.1 IEEE 802.11b Section
2.2.1.4
2.2.1.5
2.2.1.6
2.2.1.7
2.2.1.8
Data Rate
Media Access
Protocol
Transmitter Output
Power
Receiver Sensitivity
2400 ~ 2483.5MHz ISM band
11 channels for United States/ Canada/ Taiwan
13 channels for Europe Countries
14 channels for Japan
11, 5.5, 2, and 1Mbps
CSMA/CA with ACK
802.11b: 24.90dBm
Typical Sensitivity at Which Frame (1000-byte PDUs) Error Rate =
8%
Typical –84dBm for 11Mbps @ 8% PER
Typical –90dBm for 2Mbps @ 8% PER
2.2.2 IEEE 802.11g Section
Feature
2.2.2.1
2.2.2.2
Standard
Radio and
Modulation Type
Operating Frequency
Channel Numbers
om
2.2.2.8
Data Rate
Media Access
Protocol
Transmitter Output
Power
Receiver Sensitivity
pa
2.2.2.5
2.2.2.6
2.2.2.7
IEEE 802.11g
BPSK, QPSK, 16QAM, 64QAM with OFDM
2400 ~ 2483.5MHz ISM band
11 channels for United States/ Canada/ Taiwan
13 channels for Europe Countries
13 channels for Japan
6,9,12,18,24,36,48,54Mbps
CSMA/CA with ACK
ny
2.2.2.3
2.2.2.4
Detailed Description
IEEE 802.11b
DQPSK, DBPSK, DSSS, and CCK
tia
Standard
Radio and
Modulation
Schemes
Operating
Frequency
Channel Numbers
en
2.2.1.1
2.2.1.2
2.2.1.3
Detailed Description
fid
Feature
on
802.11g: 28.41dBm
Typical Sensitivity at Which Frame (1000-byte PDUs) Error Rate =
10%
–87dBm at 6Mbps
–87dBm at 9Mbps
–84dBm at 12Mbps
–82dBm at 18Mbps
–79dBm at 24Mbps
–75dBm at 36Mbps
–71dBm at 48Mbps
–70dBm at 54Mbps
2.2.3 IEEE 802.11n Section
Feature
Detailed Description
2.2.3.1
2.2.3.2
Standard
Radio and
Modulation Type
IEEE 802.11n Draft 2.0
BPSK, QPSK, 16QAM, 64QAM with OFDM
Alpha Networks Proprietary and Confidential Information
2.2.3.3
2.2.3.4
Operating Frequency
Channel Numbers
2.2.3.5
2.2.3.6
Data Rate
Media Access
Protocol
Transmitter Output
Power
Receiver Sensitivity
2.2.3.7
2.2.3.8
Detailed Description
2400 ~ 2483.5MHz ISM band
11 channels for United States/ Canada/ Taiwan
13 channels for Europe Countries
13 channels for Japan
From MCS – 0 to MCS –15 as shown in Appendix I
CSMA/CA with ACK
draft 802.11n (20MHz): 27.97dBm
draft 802.11n (40MHz): 26.16dBm
Typical Sensitivity at Which Frame (1000-byte PDUs) Error Rate =
10%
Feature
tia
HT40
on
-85dBm at MCS0
-81dBm at MCS1
-78dBm at MCS2
-75dBm at MCS3
-72dBm at MCS4
-67dBm at MCS5
-66dBm at MCS6
-65dBm at MCS7
fid
-88dBm at MCS0
-84dBm at MCS1
-81dBm at MCS2
-78dBm at MCS3
-75dBm at MCS4
-70dBm at MCS5
-69dBm at MCS6
-68dBm at MCS7
en
HT20
ny
2.2.4 General Section
Feature
2.2.4.1
2.2.4.2
2.2.4.3
Antenna Connector
Operating Voltage
Current
Consumption
Form Factor and
Interface
LEDs
2.2.4.4
Two UFL antenna connectors
3.3VDC +/- 10%
650mA at continuous transmit mode (2 Tx chains on )
250mA at continuous receive mode (2 Rx chains on )
Mini-PCI Type IIIA form factor
External LED function supported
om
2.2.4.5
Detailed Description
pa
Alpha Networks Proprietary and Confidential Information
10
2.3 Software Requirements
The Configuration Software supports Linux driver. This configuration software includes the following functions:
Information
Information allows you to monitor network status.
Configuration
Configuration allows you to configure parameters for wireless networking.
tia
Security
Supports enhanced security WEP, 802.1x, WPA and WPA2.
2.3.1 Security
2.3.1.1
Encryption
2.3.1.2
WEP Management
2.3.1.3
2.3.1.4
802.1x
WPA/WPA2
RC4 encryption algorithm
Support 64-bit and 128-bit WEP encryption
Support open system (OSA) and shared key
authentication (SKA)
Four WEP keys can be selected
STA with WEP off will never associate any AP with
WEP enabled
WEP Key Format: Option for Hex format
Support EAP-TLS, EAP-TTLS, and EAP-PEAP
Support WPA/WPA2-PSK and WPA/WPA2-EAP
Support Cipher Mode AES and TKIP
2.4.1
2.4.2
2.4.3
Length
Width
Height
Detailed Description
60.00 mm
51.00 mm
3.3mm
ny
Feature
2.4 Mechanical Requirements
en
Detailed Description
fid
Feature
on
2.5 Compatibility Requirements
Feature
Detailed Description
Wi-Fi
WHQL
Physical Layer and
Functionality
om
2.5.1
2.5.2
2.5.3
pa
This device passes the following compatibility requirements.
Meet Wi-Fi certification for IEEE 802.11b/g/n product
Meet applicable WHQL certification requirements
Meet ALPHA Engineering Test Plan and Test Report
2.6 Requirements of Reliability, Maintainability and Quality
Feature
2.6.1
2.6.2
2.6.3
MTBF
Maintainability
Quality
Detailed Description
Mean Time Between Failure > 30,000 hours
There is no scheduled preventive maintenance required
The product quality is followed-up by ALPHA factory
quality control system
2.7 Environmental Requirements
Feature
2.7.1
Operating
Temperature
Detailed Description
The product is capable of continuous reliable operation
when operating in ambient temperature of 0 ℃ to +50
Alpha Networks Proprietary and Confidential Information
11
2.7.3
Conditions
Non-Operating
Temperature
Conditions
Operating
Humidity
conditions
Non-Operating
Humidity
Conditions
℃.
Neither subassemblies is damaged nor the operational
performance is degraded when restored to the operating
temperature after exposing to storage temperature in the
range of –20 ℃ to +75 ℃.
The product is capable of continuous reliable operation
when subjected to relative humidity in the range of 10%
and 90% non-condensing.
The product is not damaged nor the performance is
degraded after exposure to relative humidity ranging
from 5% to 95% non-condensing
om
pa
ny
on
fid
en
2.7.4
Detailed Description
2.7.2
Feature
tia
Alpha Networks Proprietary and Confidential Information
12
Appendix I:
ny
The parameters in the table are:
on
fid
en
tia
Rate Dependent Parameters for High Throughput . Modulation and Coding Schemes (MCS)
om
pa
■ Rate: Rate in Mbps
■ NES: Number of FEC encoders used
■ NSD: Number of Data Subcarriers
■ NCBPS: Number of Code Bits Per Symbol (total of all spatial streams)
■ NSS: Number of Spatial Streams
Alpha Networks Proprietary and Confidential Information
13
Federal Communication Commission Interference Statement
en
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
tia
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one of the following measures:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
fid
FCC Caution: Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate this equipment.
on
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator &
your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
om
pa
ny
IEEE 802.11b or 802.11g operation of this product in the U.S.A. is firmware-limited to channels 1 through
11.
Alpha Networks Proprietary and Confidential Information
14
tia
This device is intended only for OEM integrators under the following conditions:
1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and
2) The transmitter module may not be co-located with any other transmitter or antenna,
3) For all products market in US, OEM has to limit the operation channels in CH1 to CH11 for 2.4G band
by supplied firmware programming tool. OEM shall not supply any tool or info to the end-user regarding to
Regulatory Domain change.
As long as 3 conditions above are met, further transmitter test will not be required. However, the OEM
integrator is still responsible for testing their end-product for any additional compliance requirements
required with this module installed (for example, digital device emissions, PC peripheral requirements,
etc.).
en
IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop
configurations or co-location with another transmitter), then the FCC authorization is no longer considered
valid and the FCC ID can not be used on the final product. In these circumstances, the OEM integrator will
be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC
authorization.
fid
End Product Labeling
This transmitter module is authorized only for use in device where the antenna may be installed such that
20 cm may be maintained between the antenna and users. The final end product must be labeled in a
visible area with the following: “Contains FCC ID: RRK-WMPN09”.
on
Manual Information To the End User
The OEM integrator has to be aware not to provide information to the end user regarding how to install or
remove this RF module in the user’s manual of the end product which integrates this module.
The end user manual shall include all required regulatory information/warning as show in this manual.
ny
Industry Canada Statement
pa
This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following
two conditions:
1) this device may not cause interference and
2) this device must accept any interference, including interference that may cause undesired operation of
the device
om
This device has been designed to operate with an antenna having a maximum gain of 4dBi. Antenna
having a higher gain is strictly prohibited per regulations of Industry Canada. The required antenna
impedance is 50 ohms.
To reduce potential radio interference to other users, the antenna type and its gain should be so chosen
that the EIRP is not more than required for successful communication.
IMPORTANT NOTE:
IC Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with minimum distance 20cm between the radiator & your
body.
This device is intended only for OEM integrators
under the following conditions:
The transmitter module may not be co-located with any other transmitter or antenna.
As long as conduction above is met, further transmitter test will not be required. However, the OEM
integrator is still responsible for testing their end-product for any additional compliance requirements
Alpha Networks Proprietary and Confidential Information
15
required with this module installed (for example, digital device emissions, PC peripheral requirements,
etc.).
IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop
configurations or co-location with another transmitter), then the IC authorization is no longer considered
valid and the IC ID can not be used on the final product. In these circumstances, the OEM integrator will
be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate IC
authorization.
tia
End Product Labeling
The final end product must be labeled in a visible area with the following: “Contains TX IC : 4833AWMPN09”.
fid
en
Manual Information That Must be Included
The OEM integrator has to be aware not to provide information to the end user regarding how to install or
remove.
This RF module in the user’s manual of the end product which integrates this module.
The user’s manual for OEM Integrators must include the following information in a prominent location
“IMPORTANT NOTE: To comply with FCC RF exposure compliance requirements. The antenna must not
be co-located or operating in conjunction with any other antenna or transmitter”.
pa
ny
on
This device is intended only for OEM integrators under the following conditions:
1. The antenna must be installed such that 20 cm is maintained between the antenna and users, and
4)
2. The transmitter module may not be co-located with any other transmitter or antenna,
5)
3. For all products market in CANDADA, OEM has to limit the operation channels in CH1 to CH11 for
6)
2.4G band by supplied firmware programming tool. OEM shall not supply any tool or info to the end-user
regarding to Regulatory Domain change.
As long as 3 conditions above are met, further transmitter test will not be required. However, the OEM
integrator is still responsible for testing their end-product for any additional compliance requirements
required with this module installed (for example, digital device emissions, PC peripheral requirements,
etc.).
om
以下警語適用台灣地區:
經型式認證合格之低功率射頻電機,非經許可,公司、商號或使用者均不得擅自變更頻率、加大功率或變更
原設計之特性及功能。
低功率射頻電機之使用不得影響飛航安全及干擾合法通信;經發現有干擾現象時,應立即停用,
並改善至無干擾時方得繼續使用。前項合法通信,指依電信法規定作業之無線電通信。低功率射
頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。
本模組於取得認證後將依規定於模組本體標示審合格籤,並要求平台上標示「本產 品內 含射頻模
組:ID 編號」
Alpha Networks Proprietary and Confidential Information
16

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Copy, Extract, Print high-res
Author                          : sam
Create Date                     : 2009:11:24 13:23:07+08:00
Modify Date                     : 2009:11:24 05:19:39-08:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Creator Tool                    : pdfFactory Pro www.ahasoft.com.tw/FinePrint
Metadata Date                   : 2009:11:24 05:19:39-08:00
Format                          : application/pdf
Creator                         : sam
Title                           : User Manual for WMP-N09 for EMI.doc
Producer                        : pdfFactory Pro 3.10 (Windows XP Professional Chinese)
Document ID                     : uuid:5a36eb78-bfea-4d95-b605-12291a50f356
Instance ID                     : uuid:79217afa-c80b-41c1-8705-e4c28238afae
Page Count                      : 16
EXIF Metadata provided by EXIF.tools
FCC ID Filing: RRK-WMPN09

Navigation menu