Alpha Networks WMPN12A1 11N Wireless Lan Card User Manual User s manual

Alpha Networks Inc. 11N Wireless Lan Card User s manual

User Manual

Download: Alpha Networks WMPN12A1 11N Wireless Lan Card User Manual User s manual
Mirror Download [FCC.gov]Alpha Networks WMPN12A1 11N Wireless Lan Card User Manual User s manual
Document ID1273425
Application IDCAzHtT7W12xBj27F3TEGLQ==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize24.18kB (302270 bits)
Date Submitted2010-04-27 00:00:00
Date Available2010-04-27 00:00:00
Creation Date2017-11-09 15:50:03
Producing SoftwareGPL Ghostscript 9.18
Document Lastmod2017-11-09 15:50:03
Document TitleMicrosoft Word - User's manual.doc
Document CreatorPScript5.dll Version 5.2.2
Document Author: sam

User’s Manual
For
11N Wireless Lan Card
Model Number : WMP-N12
Revision: 1.0
Alpha Networks Proprietary and Confidential Information
Test Utility Installation:
Hardware: RT3052 RGMII INIC test fixture, with gigabit Ethernet port computer
Software: RT3x5x MII V1.0.1.0
1. Insert WMPN12 to RT3052 RGMII INIC test fixture, connect the test fixture to computer with
Ethernet cable
2. Use RT3x5x MII V1.0.1.0, make sure the computer has installed the wincap.exe
3. Select GIGABIT INIC
4. Use QA tool control WMPN12
Alpha Networks Proprietary and Confidential Information
1.1 Document
This document is to specify the product requirements for 802.11n Draft 2.0 Intelligent NIC Card. This iNIC Card
is based on Ralink RT3052 single chipset that complied with complied with IEEE 802.11n Draft 2.0, IEEE 802.11
b/g standard from 2.4~2.5GHz. It can be used to provide up to 54Mbps for IEEE 802.11g , 11Mbps for IEEE
802.11b and 300Mbps for IEEE 802.11n to connect your wireless LAN.
1.2 Product Features
RT3052 , single chip , 2T2R , MA/BBP/RF
A WLAN intelligent NIC solution to a host SOC platform
High performance 384 MHz MIPS24Kec CPU inside to Ethernet PHY and Gigabit Ethernet MAC
300Mbps PHY data rate for longer range and better throughput
Compatible with IEEE 802.11g high rate standard to provide wireless 54Mbps data rate
Compatible with IEEE 802.11b high rate standard to provide wireless 11Mbps data rate
Compatible with IEEE 802.11n draft standard to provide wireless 300Mbps data rate
Operation at 2.4 ~ 2.5GHz frequency band to meet worldwide regulations
Dynamic date rate scaling at 6, 9, 12, 18, 24, 36, 48, 54Mbps for IEEE 802.11a and IEEE 802.11g
Dynamic date rate scaling at 1, 2, 5.5, and 11Mbps for IEEE 802.11b
Dynamic date rate of IEEE 802.11n scaling from MCS – 0 to MCS –15 as shown in Appendix I
Supports wireless data encryption with 64/128 bit WEP for security
Support WPA and WPA2 enhanced security
Support QoS – WMM , WMM power save
Support RGMii signals transmission
Drivers support Linux 2.6
Alpha Networks Proprietary and Confidential Information
2.0 Requirements
The following sections identify the detailed requirements of the 802.11n Draft 2.0 mPCI .
2.2 General Requirements
2.2.1 IEEE 802.11b Section
Feature
Detailed Description
2.2.2.1
2.2.2.2
Standard
Radio and
Modulation
Schemes
Operating
Frequency
Channel Numbers
IEEE 802.11b
DQPSK, DBPSK, DSSS, and CCK
2400 ~ 2483.5MHz ISM band
Data Rate
Media Access
Protocol
Transmitter Output
Power
11 channels for United States/ TAIWAN
13 channels for Europe Countries
14 channels for Japan
11, 5.5, 2, and 1Mbps
CSMA/CA with ACK
2.2.2.3
2.2.2.4
2.2.2.5
2.2.2.6
2.2.2.7
2.2.2.8
Receiver Sensitivity
Typical RF Output Power (Tolerance +-2dB) at each RF chain, Data
Rate and at room Temp. 25degree C
18±2dBm at 1,2,5.5,11Mbps
Typical Sensitivity at Which Frame (1000-byte PDUs) Error Rate =
8%
–88 dBm at 1Mbps
–88 dBm at 2Mbps
–88 dBm at 5.5Mbps
–86 dBm for 11Mbps
2.2.2 IEEE 802.11g Section
Feature
Detailed Description
2.2.3.1
2.2.3.2
Standard
Radio and
Modulation Type
Operating Frequency
Channel Numbers
IEEE 802.11g
BPSK, QPSK, 16QAM, 64QAM with OFDM
Data Rate
Media Access
Protocol
Transmitter Output
Power
2400 ~ 2483.5MHz ISM band
11 channels for United States/ TAIWAN
13 channels for Europe Countries
13 channels for Japan
6,9,12,18,24,36,48,54Mbps
CSMA/CA with ACK
2.2.3.3
2.2.3.4
2.2.3.5
2.2.3.6
2.2.3.7
2.2.3.8
Receiver Sensitivity
Typical RF Output Power (tolerance +-2dB) at each RF chain, Data
Rate and at room Temp. 25degree C
18±2dBm at 6~18 Mbps
17±2dBm at 36 and 24Mbps
15±2dBm at 54 and 48 Mbps
Typical Sensitivity at Which Frame (1000-byte PDUs) Error Rate =
10%
–87 dBm at 6Mbps
Alpha Networks Proprietary and Confidential Information
#
Feature
Detailed Description
–86 dBm at 9Mbps
–84 dBm at 12Mbps
–82 dBm at 18Mbps
–79 dBm at 24Mbps
–75 dBm at 36Mbps
–71 dBm at 48Mbps
–70 dBm at 54Mbps
2.2.3 IEEE 802.11n Section for 2.4G Band
Feature
Detailed Description
2.2.4.1
2.2.4.2
Standard
Radio and
Modulation Type
Operating Frequency
Data Rate
Media Access
Protocol
Transmitter Output
Power
IEEE 802.11n
BPSK, QPSK, 16QAM, 64QAM with OFDM
2400 ~ 2483.5MHz ISM band
From MCS – 0 to MCS –15 as shown in Appendix I
CSMA/CA with ACK
2.2.4.3
2.2.4.4
2.2.4.5
2.2.4.6
2.2.4.7
Typical RF Output Power (tolerance +-2dB) at each RF chain, Data
Rate and at room Temp. 25degree C
HT 20
17±2 dBm at MCS 0,1
17±2 dBm at MCS 2,3
16±2 dBm at MCS 4,5
14±2 dBm at MCS 6,7
HT 40
15±2 dBm at MCS 0,1
15±2 dBm at MCS 2,3
14±2 dBm at MCS 4,5
12±2 dBm at MCS 6,7
Typical Sensitivity at Which Frame (1000-byte PDUs) Error Rate =
10%
Receiver Sensitivity
HT20
–85 dBm at MCS 0
–82 dBm at MCS 1
–80 dBm at MCS 2
–77 dBm at MCS 3
–74 dBm at MCS 4
–70 dBm at MCS 5
–68 dBm at MCS 6
–66 dBm at MCS 7
HT40
–82 dBm at MCS 0
–79 dBm at MCS 1
–77 dBm at MCS 2
–74 dBm at MCS 3
–71 dBm at MCS 4
–67 dBm at MCS 5
–65 dBm at MCS 6
–63 dBm at MCS 7
2.3 General Section
Feature
Detailed Description
2.3.1.1
Antenna Connector
Three UFL antenna connectors
Alpha Networks Proprietary and Confidential Information
2.3.1.2
2.31.3
2.3.1.4
2.3.1.5
Operating Voltage
Current
Consumption
Form Factor and
Interface
LED
3.3VDC +/- 10%
450 mA at continuous transmit mode (2 Tx chains on )
250 mA at continuous receive mode (2 Rx chains on )
PCI-E form factor
External LED function supported
2.4 Software Requirements
The Configuration Software supports Linux2.6. This configuration software includes the following functions:
Information
Information allows you to monitor network status.
Configuration
Configuration allows you to configure parameters for wireless networking.
Security
Supports enhanced security WEP, 802.1x, WPA and WPA2.
2.4.1 Information
Feature
Detailed Description
2.4.1.1
General
Information
2.4.1.2
Current Link
Information
2.4.1.3
Site survey
General Information shows the name of Wireless
Adapter, Adapter MAC Address, Regulatory Domain,
Firmware Version, and Utility Version.
Current Link Information shows the Current Setting
ESSID, Channel Number, Associated BSSID, Network
Type, Security Status, Link Status, Transmit Speed,
Signal Strength, and Link Quality.
To search the neighboring access points and display the
information of all access points.
2.4.2 Configuration
Feature
Detailed Description
2.4.2.1
ESS ID
2.4.2.2
Network Type
Input an SSID number if the roaming feature is enabled
Supports for ASCII printable characters.
Ad-hoc Mode and 802.11 Ad-hoc Mode for network
configurations that do not have any access points
Infrastructure Mode for network configurations with
access points
Extend the battery life of clients by allowing the client
to sleep for short periods of time while the Access Point
buffers the messages.
Set the number of bytes used for fragmentation
boundary for messages
Set the number of bytes used for RTS/CTS boundary
2.4.2.3
Power Save
2.4.2.4
RTS Threshold
2.4.2.5
2.4.2.6
Fragment
Threshold
Transmission Speed
2.4.2.7
Roaming
Feature
Detailed Description
2.4.3.1
Encryption
This indicates the communication rates. Select
appropriate transmission speed to match your wireless
LAN settings
Support Automatic or Manual Rescan to associate with
access point.
2.4.3 Security
RC4 encryption algorithm
Support 64-bit and 128-bit WEP encryption
Alpha Networks Proprietary and Confidential Information
#
Feature
Detailed Description
2.4.3.2
WEP Management
2.4.3.3
2.4.3.4
802.1x
WPA/WPA2
Support open system (OSA) and shared key
authentication (SKA)
Four WEP keys can be selected
STA with WEP off will never associate any AP with
WEP enabled
WEP Key Format: Option for Hex format
Support EAP-TLS, EAP-TTLS, and EAP-PEAP
Support WPA/WPA2-PSK and WPA/WPA2-EAP
Support Cipher Mode AES and TKIP
2.5 Mechanical Requirements
Feature
Detailed Description
2.5.1
2.5.2
2.5.3
Length
Width
Height
72mm(max)
48mm (+-0.25)
4.7mm (+-0.1)
2.6 Compatibility Requirements
This device passes the following compatibility requirements.
Feature
Detailed Description
2.6.1
2.6.2
2.6.3
Wi-Fi
WHQL
Physical Layer and
Functionality
Meet Wi-Fi certification for IEEE 802.11b/g/n product
Meet applicable WHQL certification requirements
Meet ALPHA Engineering Test Plan and Test Report
2.7 Requirements of Reliability, Maintainability and Quality
Feature
Detailed Description
2.7.1
2.7.2
2.7.3
MTBF
Maintainability
Quality
Mean Time Between Failure > 30,000 hours
There is no scheduled preventive maintenance required
The product quality is followed-up by ALPHA factory
quality control system
2.8 Environmental Requirements
Feature
Detailed Description
2.8.1
Operating
Temperature
Conditions
Non-Operating
Temperature
Conditions
The product is capable of continuous reliable operation
when operating in ambient temperature of 0℃ to +40℃.
Operating
Humidity
conditions
Non-Operating
Humidity
Conditions
Neither subassemblies is damaged nor the operational
performance is degraded when restored to the operating
temperature after exposing to storage temperature in the
range of -40 ℃ to +70℃.
The product is capable of continuous reliable operation
when subjected to relative humidity in the range of 10%
and 90% non-condensing.
The product is not damaged nor the performance is
degraded after exposure to relative humidity ranging
from 5% to 95% non-condensing
2.8.2
2.8.3
2.8.4
Alpha Networks Proprietary and Confidential Information
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate this equipment.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be
installed and operated with minimum distance 20cm between the radiator & your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
IEEE 802.11b or 802.11g operation of this product in the U.S.A. is firmware-limited to channels 1 through 11.
This device is intended only for OEM integrators under the following conditions:
1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and
2) The transmitter module may not be co-located with any other transmitter or antenna,
3) For all products market in US, OEM has to limit the operation channels in CH1 to CH11 for 2.4G band by supplied firmware
programming tool. OEM shall not supply any tool or info to the end-user regarding to Regulatory Domain change.
As long as 3 conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for
testing their end-product for any additional compliance requirements required with this module installed (for example, digital device
emissions, PC peripheral requirements, etc.).
IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop configurations or co-location with
another transmitter), then the FCC authorization is no longer considered valid and the FCC ID can not be used on the final product. In
these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining
a separate FCC authorization.
End Product Labeling
This transmitter module is authorized only for use in device where the antenna may be installed such that 20 cm may be maintained
between the antenna and users. The final end product must be labeled in a visible area with the following: “Contains FCC ID: RRKWMPN12A1”.
Manual Information To the End User
The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in
the user’s manual of the end product which integrates this module.
The end user manual shall include all required regulatory information/warning as show in this manual.
Alpha Networks Proprietary and Confidential Information
以
警語適用台灣地區
經型式認證合格之低功率射頻電機,非經許可,公司 商號或使用者均不得擅自變更頻率 加大功率或變更
原設計之特性及功能
低功率射頻電機之使用不得影響飛航安全及 擾合法通信 經發現有 擾現象時,應立即停用,並改善至無
擾時方得繼續使用 前項合法通信,指依電信法規定作業之無線電通信 低功率射頻電機須忍 合法通信
或工業 科學及醫療用電波輻射性電機設備之 擾
本模組於
號
得認證後將依規定於模組本體標示審合格籤,並要求
台
標示
本產品內含射頻模組
Alpha Networks Proprietary and Confidential Information
ID 編

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Extract, Print high-res
Author                          : sam
Create Date                     : 2010:04:27 14:08:58+08:00
Modify Date                     : 2010:04:27 06:46:37-07:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Producer                        : Acrobat Distiller 8.1.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2010:04:27 06:46:37-07:00
Format                          : application/pdf
Title                           : Microsoft Word - User's manual.doc
Creator                         : sam
Document ID                     : uuid:0fb6152d-292e-4b23-baae-dd27b9ecc7f2
Instance ID                     : uuid:62ffa085-9ebe-4916-a2ab-b64fbc4733e2
Page Count                      : 9
EXIF Metadata provided by EXIF.tools
FCC ID Filing: RRK-WMPN12A1

Navigation menu