Alpha Networks WMPND02A1 11N Wireless LAN CARD User Manual WMP ND02 Manual

Alpha Networks Inc. 11N Wireless LAN CARD WMP ND02 Manual

Manual

Download: Alpha Networks WMPND02A1 11N Wireless LAN CARD User Manual WMP ND02 Manual
Mirror Download [FCC.gov]Alpha Networks WMPND02A1 11N Wireless LAN CARD User Manual WMP ND02 Manual
Document ID1061353
Application IDiUh8FvuEvKHcPbDUGYtBWg==
Document DescriptionManual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize39.49kB (493565 bits)
Date Submitted2009-01-23 00:00:00
Date Available2009-01-23 00:00:00
Creation Date2009-01-09 16:29:21
Producing SoftwarepdfFactory Pro 3.10 (Windows XP Professional Chinese)
Document Lastmod2009-01-16 14:53:33
Document TitleWMP-ND02 Manual.doc
Document CreatorpdfFactory Pro www.ahasoft.com.tw/FinePrint
Document Author: sam

Manual
For
11n Wireless LAN CARD
11N 無線網卡
Model Number : WMP-ND02
Alpha Networks Proprietary and Confidential Information
1.0 Scope
1.1 Document
This document is to specify the product requirements for 802.11n Draft 2.0 Mini PCI. This mPCI
is based on Ralink chipset that complied with complied with IEEE 802.11n Draft 2.0, and it is also
backward complied with IEEE 802.11a standard from 5.15~5.850GHz(upon every contries to use
different frequencies) wideband and IEEE 802.11b/g standard from 2.4-2.4835GHz. It can be used
to provide up to 54Mbps for IEEE 802.11a and IEEE 802.11g , 11Mbps for IEEE 802.11b and
300Mbps for IEEE 802.11n to connect your wireless LAN.
1.2 Product Features
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
A WLAN intelligent NIC solution to a host SOC platform
High performance 266 MHz MIPS4Kec CPU inside
Compatible with IEEE 802.11g high rate standard to provide wireless 54Mbps data rate
Compatible with IEEE 802.11a standard to provide wireless 54Mbps data rate
Compatible with IEEE 802.11b high rate standard to provide wireless 11Mbps data rate
Compatible with IEEE 802.11n draft standard to provide wireless 300Mbps data rate
Operation at 2.4 ~ 2.4835GHz and 5.15 ~ 5.850GHz (upon every contries to use different
frequencies) frequency band to meet worldwide regulations
Dynamic date rate scaling at 6, 9, 12, 18, 24, 36, 48, 54Mbps for IEEE 802.11a and IEEE
802.11g
Dynamic date rate scaling at 1, 2, 5.5, and 11Mbps for IEEE 802.11b
Dynamic date rate of IEEE 802.11n scaling from MCS – 0 to MCS –15 as shown in
Appendix I
Supports wireless data encryption with 64/128 bit WEP for security
Support WPA and WPA2 enhanced security
Drivers support Linux 2.4.6
RoHS complaint
Alpha Networks Proprietary and Confidential Information
2.0 Requirements
The following sections identify the detailed requirements of the 802.11n Draft 2.0 mPCI.
2.1 Functional Block Diagram
2.2 General Requirements
2.2.1 IEEE 802.11a Section
Feature
Detailed Description
2.2.1.1
2.2.1.2
Standard
Radio and
Modulation
Type
Operating
Frequency
Ÿ
Ÿ
IEEE 802.11a
BPSK, QPSK, 16QAM, 64QAM with OFDM
Ÿ
5.15 ~ 5.25GHz. , 5.725~5.850 GHz for US and
Canada
5.25 ~ 5.35GHz. , 5.725~5.850 GHz for Taiwan
5.15 ~ 5.35GHz and 5.47~5.725GHz for Japan
5.15 ~ 5.35GHz and 5.47 ~ 5.725GHz for
Europe
5.725~5.850GHz for China
9 channels for US
8 channels for Taiwan
6,9,12,18,24,36,48,54Mbps
2.2.1.3
Ÿ
Ÿ
Ÿ
2.2.1.4
2.2.1.5
Channel
Numbers
Data Rate
Ÿ
Ÿ
Ÿ
Ÿ
Alpha Networks Proprietary and Confidential Information
#
Feature
Detailed Description
2.2.1.6
Media Access
Protocol
Transmitter
Output Power at
Antenna
Connector
Receiver
Sensitivity at
Antenna
Connector
Ÿ
CSMA/CA with ACK
Ÿ
Maximum to 23.15dBm
Feature
Detailed Description
2.2.2.1
2.2.2.2
Standard
Radio and
Modulation
Schemes
Operating
Frequency
Channel
Numbers
Ÿ
Ÿ
IEEE 802.11b
DQPSK, DBPSK, DSSS, and CCK
Ÿ
2400 ~ 2483.5MHz ISM band
Ÿ
Data Rate
Media Access
Protocol
Transmitter
Output Power
Receiver
Sensitivity
Ÿ
Ÿ
11 channels for United States and Canada and Taiwan
13 channels for Europe Countries
14 channels for Japan
11, 5.5, 2, and 1Mbps
CSMA/CA with ACK
Ÿ
Maximum to 21.28dBm
2.2.1.7
2.2.1.8
2.2.2.3
2.2.2.4
2.2.2.5
2.2.2.6
2.2.2.7
2.2.2.8
Ÿ
Typical Sensitivity at each RF chain. Frame
(1000-byte PDUs) Error Rate <10% at room
Temp. 25degree C and 3.3V
–88dBm at 6Mbps
Ÿ
–87dBm at 9Mbps
Ÿ
–86dBm at 12Mbps
Ÿ
–84dBm at 18Mbps
Ÿ
–82dBm at 24Mbps
Ÿ
–78dBm at 36Mbps
Ÿ
–72dBm at 48Mbps
Ÿ
–71dBm at 54Mbps
Ÿ
2.2.2 IEEE 802.11b Section
Ÿ
Typical Sensitivity at Which Frame (1000-byte PDUs)
Error Rate = 8% at room Temp. 25degree C and 3.3V
–90dBm at 1Mbps
Ÿ
–90dBm at 2Mbps
Ÿ
–88dBm at 5.5Mbps
Ÿ
–85dBm for 11Mbps
Ÿ
2.2.3 IEEE 802.11g Section
Feature
Detailed Description
2.2.3.1
2.2.3.2
Standard
Radio and
Modulation Type
Operating
Frequency
Channel
Ÿ
Ÿ
IEEE 802.11g
BPSK, QPSK, 16QAM, 64QAM with OFDM
Ÿ
2400 ~ 2483.5MHz ISM band
Ÿ
11 channels for United States and Canada and Taiwan
2.2.3.3
2.2.3.4
Alpha Networks Proprietary and Confidential Information
#
Feature
Detailed Description
Numbers
Data Rate
Media Access
Protocol
Transmitter
Output Power
Receiver
Sensitivity
Ÿ
Ÿ
13 channels for Europe Countries
13 channels for Japan
6,9,12,18,24,36,48,54Mbps
CSMA/CA with ACK
Ÿ
Maximum to 24.81dBm
Feature
Detailed Description
2.2.4.1
2.2.4.2
Standard
Radio and
Modulation Type
Operating
Frequency
Ÿ
Ÿ
IEEE 802.11n
BPSK, QPSK, 16QAM, 64QAM with OFDM
Ÿ
2.4 ~ 2.4835GHz, 5.15 ~ 5.25GHz. , 5.725~5.850 GHz
for US and Canada
2.4 ~ 2.4835GHz, 5.25 ~ 5.35GHz. , 5.725~5.850 GHz
for Taiwan
2.2.3.5
2.2.3.6
2.2.3.7
2.2.3.8
2.2.4.3
Ÿ
Typical Sensitivity at Which Frame (1000-byte PDUs)
Error Rate = 10% at room Temp. 25degree C and 3.3V
–90dBm at 6Mbps
Ÿ
–88dBm at 9Mbps
Ÿ
–85dBm at 12Mbps
Ÿ
–83dBm at 18Mbps
Ÿ
–80dBm at 24Mbps
Ÿ
–76dBm at 36Mbps
Ÿ
–73dBm at 48Mbps
Ÿ
–72dBm at 54Mbps
Ÿ
2.2.4 IEEE 802.11n Section
Ÿ
Ÿ
Ÿ
Ÿ
2.2.4.4
Channel
Numbers
Ÿ
Ÿ
Ÿ
2.2.4.5
2.2.4.6
Data Rate
Media Access
Ÿ
Ÿ
2.4 ~ 2.4835GHz, 5.15 ~ 5.35GHz and 5.47~5.725GHz
for Japan
2.4 ~ 2.4835GHz, 5.15 ~ 5.35GHz and 5.47 ~ 5.725GHz
for Europe
2.4 ~ 2.4835GHz, 5.725~5.850GHz for China
United States:
For 15.247(2.4GHz)
11 for draft 802.11n (20MHz)
7 for draft 802.11n (40MHz)
For 15.247(5GHz)
5 for draft 802.11n (20MHz)
2 for draft 802.11n (40MHz)
Taiwan:
For 2.4GHz
11 for draft 802.11n (20MHz)
7 for draft 802.11n (40MHz)
For 5GHz
8 for draft 802.11n (20MHz)
3 for draft 802.11n (40MHz)
From MCS – 0 to MCS –15 as shown in Appendix I
CSMA/CA with ACK
Alpha Networks Proprietary and Confidential Information
#
Feature
2.2.4.7
2.2.4.8
Detailed Description
Protocol
Transmitter
Output Power
Receiver
Sensitivity
Ÿ
Maximum to 27.4dBm
Ÿ
Typical Sensitivity at Which Frame (1000-byte PDUs)
Error Rate = 10% at room Temp. 25degree C and 3.3V
HT20
–87dBm at MCS0
Ÿ
–85dBm at MCS1
Ÿ
–82dBm at MCS2
Ÿ
–78dBm at MCS3
Ÿ
–76dBm at MCS4
Ÿ
–72dBm at MCS5
Ÿ
–70dBm at MCS6
Ÿ
–69dBm at MCS7
Ÿ
HT40
–84dBm at MCS0
Ÿ
–81dBm at MCS1
Ÿ
–79dBm at MCS2
Ÿ
–75dBm at MCS3
Ÿ
–73dBm at MCS4
Ÿ
–68dBm at MCS5
Ÿ
–66dBm at MCS6
Ÿ
–65dBm at MCS7
Ÿ
2.3 General Section
Feature
Detailed Description
2.3.1.1
Antenna
Connector
Operating
Voltage
Current
Consumption
Form Factor and
Interface
LEDs
Ÿ
Three UFL antenna connectors
Ÿ
3.3VDC +/- 5%
Ÿ
Ÿ
Ÿ
1000mA at continuous transmit mode (2 Tx chains on )
650mA at continuous receive mode (3 Rx chains on )
Mini-PCI form factor
Ÿ
External LED function supported
2.3.1.2
2.31.3
2.3.1.4
2.3.1.5
2.4 Software Requirements
The Configuration Software supports Linux2.4.6. This configuration software includes the following functions:
Ÿ
Information
Information allows you to monitor network status.
Ÿ
Configuration
Configuration allows you to configure parameters for wireless networking.
Ÿ
Security
Supports enhanced security WEP, 802.1x, WPA and WPA2.
2.4.1 Information
2.4.1.1
Feature
General
Information
Detailed Description
Ÿ
General Information shows the name of
Wireless Adapter, Adapter MAC Address,
Regulatory Domain, Firmware Version, and
Alpha Networks Proprietary and Confidential Information
#
Feature
2.4.1.2
Current Link
Information
Ÿ
2.4.1.3
Site survey
Ÿ
Feature
Detailed Description
2.4.2.1
ESS ID
Ÿ
Network Type
Ÿ
Ÿ
2.4.2.2
Detailed Description
Ÿ
Utility Version.
Current Link Information shows the Current
Setting ESSID, Channel Number, Associated
BSSID, Network Type, Security Status, Link
Status, Transmit Speed, Signal Strength, and
Link Quality.
To search the neighboring access points and
display the information of all access points.
2.4.2 Configuration
Input an SSID number if the roaming feature is
enabled
Supports for ASCII printable characters.
Ad-hoc Mode and 802.11 Ad-hoc Mode for
network configurations that do not have any
access points
Infrastructure Mode for network
configurations with access points
Extend the battery life of clients by allowing
the client to sleep for short periods of time
while the Access Point buffers the messages.
Set the number of bytes used for fragmentation
boundary for messages
Set the number of bytes used for RTS/CTS
boundary
This indicates the communication rates. Select
appropriate transmission speed to match your
wireless LAN settings
Support Automatic or Manual Rescan to
associate with access point.
2.4.3 Security
2.4.2.3
Power Save
Ÿ
2.4.2.4
RTS Threshold
Ÿ
2.4.2.5
Fragment
Threshold
Transmission
Speed
Ÿ
2.4.2.7
Roaming
Ÿ
Feature
Detailed Description
2.4.3.1
Encryption
Ÿ
Ÿ
Ÿ
2.4.3.2
WEP
Management
Ÿ
Ÿ
2.4.3.3
802.1x
Ÿ
Ÿ
2.4.3.4
WPA/WPA2
Ÿ
2.4.2.6
Ÿ
Ÿ
RC4 encryption algorithm
Support 64-bit and 128-bit WEP encryption
Support open system (OSA) and shared key
authentication (SKA)
Four WEP keys can be selected
STA with WEP off will never associate any AP
with WEP enabled
WEP Key Format: Option for Hex format
Support EAP-TLS, EAP-TTLS, and
EAP-PEAP
Support WPA/WPA2-PSK and
WPA/WPA2-EAP
Support Cipher Mode AES and TKIP
Alpha Networks Proprietary and Confidential Information
2.5 Mechanical Requirements
Feature
Detailed Description
2.5.1
2.5.2
2.5.3
Length
Ÿ
Ÿ
Ÿ
Width
Height
57.64mm(max)
59.60mm(+-0.25)
6mm(+-0.2.5)
2.6 Compatibility Requirements
This device passes the following compatibility requirements.
Feature
Detailed Description
2.6.1
Wi-Fi
Ÿ
2.6.2
WHQL
Ÿ
2.6.3
Physical Layer and
Functionality
Ÿ
Meet Wi-Fi certification for IEEE
802.11a/b/g/n product
Meet applicable WHQL certification
requirements
Meet ALPHA Engineering Test Plan and Test
Report
2.7 Requirements of Reliability, Maintainability and Quality
Feature
Detailed Description
2.7.1
2.7.2
MTBF
Maintainability
Ÿ
Ÿ
2.7.3
Quality
Ÿ
Mean Time Between Failure > 30,000 hours
There is no scheduled preventive maintenance
required
The product quality is followed-up by ALPHA
factory quality control system
2.8 Environmental Requirements
Feature
Detailed Description
2.8.1
Operating
Temperature
Conditions
Ÿ
2.8.2
Non-Operating
Temperature
Conditions
Ÿ
2.8.3
Operating
Humidity
conditions
Ÿ
The product is capable of continuous reliable operation
when subjected to relative humidity in the range of 10%
and 90% non-condensing.
2.8.4
Non-Operating
Humidity
Conditions
Ÿ
The product is not damaged nor the
performance is degraded after exposure to
relative humidity ranging from 5% to 95%
non-condensing
The product is capable of continuous reliable
operation when operating in ambient
temperature of 0 ℃ to +45℃.
Neither subassemblies is damaged nor the
operational performance is degraded when
restored to the operating temperature after
exposing to storage temperature in the range
of –20 ℃ to +75 ℃.
Alpha Networks Proprietary and Confidential Information
Alpha Networks Proprietary and Confidential Information
Appendix I:
Rate Dependent Parameters for High Throughput . Modulation and Coding Schemes (MCS)
The parameters in the table are:
■
■
■
■
■
Rate: Rate in Mbps
NES: Number of FEC encoders used
NSD: Number of Data Subcarriers
NCBPS: Number of Code Bits Per Symbol (total of all spatial streams)
NSS: Number of Spatial Streams
10
Test Equipment/測試設備列表
English
EQUIPMENT
NO.
Q’TY
IQ-View
Shielded Box (530 * 280 *160 mm) made of Copper
Splitter (1 * 3)
RF CABLE
PC (with monitor)
USB 2.0 / PCI / MINI PCI / CARD BUS Interface
Test connect (HIROSE / IPEX)
Fixed Attenuator (20dB)
10 Power supply
中文
項次.
設備名稱
數量
IQ-View
隔離箱 (530 * 280 *160 mm) made of Copper
分配器(1 * 3)
RF 線
PC (with monitor)
PCI GPIB 控制卡 或 USB GPIB 控制卡
USB 2.0 / PCI / MINI PCI / CARD BUS Interface
測試接頭(HIROSE / IPEX)
固定式衰減器(20dB)
10 電源供應器
11
Test Environment Diagram/測試環境圖示
Splitter (1 對 3)
IP: 192.168.100.254
(Note:For IQ-View / IQ-Flex)
12
Normal Test Operating Procedure/一般作業用測試操作程序
1. Testing Steps: 6 steps in total
1. 測試步驟: 共 6 個步驟
註 1:測試前請先安裝待測物之 driver.
註 2:測試前請先依照附錄(Test Programming Setup & Test Program Install step
/ 測試程式設定和測試環境架設說明)設定
[Step 1] Run ”ATEToolRT28xx” at DUT (see Figure 1) to open test window (see Figure 2).
[步驟 1] 執行 DUT 端上的”ATEToolRT28xx”(如圖 1)開啟如圖 2 測試畫面。
(Figure 1)
(Figure 2)
13
[Step 2] Select test model, Then Kevin W.O Number and Serial number and Worker ID and Site Name.
(see Figure 3)
[步驟 2] 選取測試 Model 並鍵入工單號碼及 Serial Number 和測試人員及測試站別(如圖 3)
(Figure 3)
選取測試 Model
鍵入工單號碼及 Serial Number
和測試人員及測試站別
14
[Step 3] (a) Plug DUT into USB 2.0 / PCI / MINI PCI / CARD BUS Interface
(b) Plug RF Cable on DUT antenna point. (MAIN)
[步驟 3] (a) 將待測物插入 USB 2.0 / PCI / MINI PCI / CARD BUS Interface 介面。
(b) 將待測物接上測試線於天線端。(MAIN)
[Step 4] Click “START” to begin test. (See Figure 4)
[步驟 4] 按下”STRAT”開始測試(如圖 4)。
(Figure 4)
15
[Step 5] When test finish, it will show “PASS”(see Figure 5).
[步驟 5] 當測試完成,會出現’’PASS”的視窗(圖 5)。
(Figure 5)
[Step 6] When show “PASS”, click “OK” and change the next one to continue
[步驟 6] 出現 PASS 畫面,按 OK 鍵並換下一片繼續[步驟 2]到[步驟 5]。
16
Test Program setup / 測試程式設定
[步驟 1] 按下程式中”Config” 選項 (如圖 1),並輸入密碼 “admin(測試用)”。
(如圖 2)
(Figure 1)
(Figure 2)
17
[步驟 2] 仿照以下圖形及數據去設定程式,完成後按下”ok”
註 1: 請 Import 檔案(1WMPND02..A1G.ini)進來,一樣可完成參數設定
註 2: Tx Power Calibration(11g)(Path Loss 請依當時 Cable loss 填入)
註 3: Local IP 與 Server IP 請依照產線電腦 IP 及產線 SFCS Server 設定
18
Test Program Install step / 測試環境架設說明
1.將測試設備接線完畢
2.準備乾淨的 windowsXP 環境
3.將測試程式複製至資料夾中
4.安裝測試程式資料夾內的 ANIO Protocol Driver 資料夾裡所附的 ANIO.exe
5.安裝待測物網卡的驅動程式
6.Calibration 測試環境,測試時加入一衰減器 20dB 測試.
7.開始進行測試
19
F ed er al Co m mu n i c ati o n Co mmi ssi o n I n t erf er en c e Sta te men t
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
a particular installation.
However, there is no guarantee that interference will not occur in
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate this equipment.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator
& your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.
Operations in the 5.15-5.25GHz band are restricted to indoor usage only
IEEE 802.11b or 802.11g operation of this product in the U.S.A. is firmware-limited to channels 1
through 11.
20
This device is intended only for OEM integrators under the following conditions:
1)
The antenna must be installed such that 20 cm is maintained between the antenna and users, and
2)
The transmitter module may not be co-located with any other transmitter or antenna,
3)
For all products market in US, OEM has to limit the operation channels in CH1 to CH11 for 2.4G
band by supplied firmware programming tool. OEM shall not supply any tool or info to the end-user
regarding to Regulatory Domain change.
As long as 3 conditions above are met, further transmitter test will not be required. However, the OEM
integrator is still responsible for testing their end-product for any additional compliance requirements
required with this module installed (for example, digital device emissions, PC peripheral requirements,
etc.).
IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop
configurations or co-location with another transmitter), then the FCC authorization is no longer considered
valid and the FCC ID can not be used on the final product. In these circumstances, the OEM integrator
will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate
FCC authorization.
End Product Labeling
This transmitter module is authorized only for use in device where the antenna may be installed such that
20 cm may be maintained between the antenna and users. The final end product must be labeled in a
visible area with the following: “Contains FCC ID: RRK-WMPND02A1”.
Manual Information To the End User
The OEM integrator has to be aware not to provide information to the end user regarding how to install or
remove this RF module in the user’s manual of the end product which integrates this module.
The end user manual shall include all required regulatory information/warning as show in this manual.
Industry Canada Statement
This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following
two conditions:
1) this device may not cause interference and
21
2) this device must accept any interference, including interference that may cause undesired operation of
the device
This device has been designed to operate with an antenna having a maximum gain of 3.21dBi. Antenna
having a higher gain is strictly prohibited per regulations of Industry Canada. The required antenna
impedance is 50 ohms.
To reduce potential radio interference to other users, the antenna type and its gain should be so chosen
that the EIRP is not more than required for successful communication.
Caution:
The device for the band 5150-5250 MHz is only for indoor usage to reduce potential for harmful
interference to co-channel mobile satellite systems.
Because high power radars are allocated as primary users (meaning they have priority) in 5250-5350
MHz and 5650-5850 MHz, these radars could cause interference and/or damage to license exempt LAN
devices.
IMPORTANT NOTE:
IC Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with minimum distance 20cm between the radiator & your
body.
22
以下警語適用台灣地區:
經型式認證合格之低功率射頻電機,非經許可,公司、商號或使用者均不得擅自變更頻率、加大功率或變更
原設計之特性及功能。
低功率射頻電機之使用不得影響飛航安全及干擾合法通信;經發現有干擾現象時,應立即停用,並改善至無
干擾時方得繼續使用。前項合法通信,指依電信法規定作業之無線電通信。低功率射頻電機須忍受合法通信
或工業、科學及醫療用電波輻射性電機設備之干擾。
在 5.25-5.35 秭赫(GHz)頻帶內操作之無線資訊傳輸設備,限於室內使用。
本模組於取得認證後將依規定於模組本體標示審合格籤,並要求平台上標示「本產品內含射頻模組:ID 編號」
23

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Copy, Extract, Print high-res
XMP Toolkit                     : 3.1-701
Create Date                     : 2009:01:09 16:29:21+08:00
Creator Tool                    : pdfFactory Pro www.ahasoft.com.tw/FinePrint
Modify Date                     : 2009:01:16 14:53:33+08:00
Metadata Date                   : 2009:01:16 14:53:33+08:00
Format                          : application/pdf
Creator                         : sam
Title                           : WMP-ND02 Manual.doc
Producer                        : pdfFactory Pro 3.10 (Windows XP Professional Chinese)
Document ID                     : uuid:6b233207-482b-45fa-b2b7-46d43b316e21
Instance ID                     : uuid:35dba30f-efba-4c92-b12e-75ac6d269170
Page Count                      : 23
Author                          : sam
EXIF Metadata provided by EXIF.tools
FCC ID Filing: RRK-WMPND02A1

Navigation menu