Alpha Networks WUSN26 Wifi module User Manual User s guide

Alpha Networks Inc. Wifi module User s guide

User Man_RRKWUSN26

Download: Alpha Networks WUSN26 Wifi module User Manual User s guide
Mirror Download [FCC.gov]Alpha Networks WUSN26 Wifi module User Manual User s guide
Document ID1581222
Application IDcyk8ETqUCOvqGgPIVnbwzA==
Document DescriptionUser Man_RRKWUSN26
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize23.16kB (289481 bits)
Date Submitted2011-11-15 00:00:00
Date Available2011-11-15 00:00:00
Creation Date2011-11-09 14:18:00
Producing SoftwareAcrobat Distiller 8.1.0 (Windows)
Document Lastmod2011-11-14 13:46:00
Document TitleMicrosoft Word - User's guide
Document CreatorPScript5.dll Version 5.2
Document Author: sam

User’s Guide
For
Wifi module
Model Number: WUS-N26
Revision: 1.3
Revision History
Rev.
Date
Author
Reason for Changes
1.0
1.1
1.2
April 11, 2011
April 19, 2011
June 21, 2011
Lena Chen
Lena Chen
Lena Chen
1.3
September 19 ,
2011
Lena Chen
•
•
•
•
•
•
•
•
initial
modify TX power and RX sensitivity
modify length and width in 2.3 Mechanical Requirement
add board outline in 2,3 Mechanical Requirement
modify TX power value and RX sensitivity
add power consumption information
modify TX power value in 2.2.1.7 , 2.2.2.7 and 2.2.3.6
add temperature range of operating temperature conditions in
2.5.1
Contents
INSTALLATION GUIDE ............................................................................................................................................................ 03
1.1 DOCUMENT.................................................................................................................................................................... 13
1.2 PRODUCT FEATURES...................................................................................................................................................... 13
2.1 FUNCTIONAL BLOCK DIAGRAM ..................................................................................................................................... 14
2.2 GENERAL REQUIREMENTS ............................................................................................................................................. 14
2.2.1 IEEE 802.11b Section............................................................................................................................................ 14
2.2.2 IEEE 802.11g Section............................................................................................................................................ 14
2.2.3 IEEE 802.11 final n Section .................................................................................................................................. 15
2.2.4 General Section ..................................................................................................................................................... 16
2.3 MECHANICAL REQUIREMENTS....................................................................................................................................... 16
2.4 REQUIREMENTS OF RELIABILITY, MAINTAINABILITY AND QUALITY ............................................................................. 16
2.5 ENVIRONMENTAL REQUIREMENTS ................................................................................................................................ 17
2.6 REGULATORY ................................................................................................................................................................ 17
Installation Guide
Please follow below indication to setup WUS-N-26 devices.
;****************************************************************************************
; RT2870QA.inf
; This installation script supports 2000 & XP for the
; Ralink UsbDumpr_RT2870 series Wireless LAN Card.
; Copyright (c)2002 ~ 2011, Ralink Technology Corp., All Rights Reserved
; All Rights Reserved.
; Developed by RaLink Technology, Corp. -- http://www.ralinktech.com
;****************************************************************************************
[Version]
DriverVer=03/18/2011, 1.00.07.0000
Signature="$Chicago$"
Compatible=1
Class=Net
ClassGUID={4d36e972-e325-11ce-bfc1-08002be10318}
Provider=%Provider%
;CatalogFile=UsbDumpr_RT2870.CAT
;;for WHQL certified
[ControlFlags]
;***********Ralink 802.11b board ***********
ExcludeFromSelect = USB\VID_148F&PID_2870
ExcludeFromSelect = USB\VID_18E8&PID_6196
[Manufacturer]
%V_Provider%=Adapters
[Adapters]
; DisplayName
; -----------
Section
-------
DeviceID
--------
%UsbDumpr_RT2870.DeviceDesc% =UsbDumpr_RT2870.ndi,
USB\VID_148F&PID_2870
%UsbDumpr_RT2770.DeviceDesc% =UsbDumpr_RT2870.ndi,
USB\VID_148F&PID_2770
%UsbDumpr_RT3070.DeviceDesc% =UsbDumpr_RT2870.ndi,
USB\VID_148F&PID_3070
%UsbDumpr_RT3071.DeviceDesc% =UsbDumpr_RT2870.ndi,
USB\VID_148F&PID_3071
%UsbDumpr_RT3072.DeviceDesc% =UsbDumpr_RT2870.ndi,
USB\VID_148F&PID_3072
%UsbDumpr_RT2070.DeviceDesc% =UsbDumpr_RT2870.ndi,
USB\VID_148F&PID_2070
%UsbDumpr_RT3572.DeviceDesc% =UsbDumpr_RT2870.ndi,
USB\VID_148F&PID_3572
%UsbDumpr_RT3370.DeviceDesc% =UsbDumpr_RT2870.ndi,
USB\VID_148F&PID_3370
%UsbDumpr_RT3573.DeviceDesc% =UsbDumpr_RT2870.ndi,
USB\VID_148F&PID_3573
%UsbDumpr_RT8070.DeviceDesc% =UsbDumpr_RT2870.ndi,
USB\VID_148F&PID_8070
%UsbDumpr_RT5370.DeviceDesc% =UsbDumpr_RT2870.ndi,
USB\VID_148F&PID_5370
%UsbDumpr_RT5372.DeviceDesc% =UsbDumpr_RT2870.ndi,
USB\VID_148F&PID_5372
%UsbDumpr_RT5572.DeviceDesc% =UsbDumpr_RT2870.ndi,
USB\VID_148F&PID_5572
;*******************************************************************************************
; Windows 9X specific entries
;*******************************************************************************************
[UsbDumpr_RT2870.ndi]
AddReg=Common.reg, UsbDumpr_RT2870.ndi.reg
CopyFiles=win9x.CopyFiles
;*******************************************************************************************
; NT specific entries
;*******************************************************************************************
[UsbDumpr_RT2870.ndi.NT]
AddReg=Common.reg, UsbDumpr_RT2870.ndi.NT.reg
Characteristics=0x84
; NCF_REMOVABLE | NCF_HAS_UI | NCF_PHYSICAL
BusType=5
CopyFiles=NT.CopyFiles
; NT services sections
[UsbDumpr_RT2870.ndi.NT.Services]
AddService=UsbDumpr_RT2870, 2, UsbDumpr_RT2870.Service, common.EventLog
[UsbDumpr_RT2870.ndi.reg]
HKR, ,
HKR, Ndi,
NTMPDriver,
0, RT2870QA.sys
DeviceID,
0, "USB\VID_148F&PID_2870"
HKR, ,
RunningWin9X,
0, "1"
HKR, ,
DevLoader,
HKR, ,
DeviceVxDs,
HKR, ,
EnumPropPages, 0, "netdi.dll,EnumPropPages"
0, *ndis
0, RT2870QA.sys
;
; NDIS Info
HKR, NDIS,
LogDriverName, 0, "UsbDumpr_RT2870"
HKR, NDIS,
MajorNdisVersion,1, 03
HKR, NDIS,
MinorNdisVersion,1, 0A
HKR, ,
BusType,
HKR, NDI,
0, 5
CardType,
0, "PCI"
; Interfaces
HKR, Ndi\Interfaces,
DefUpper,
0, "ndis3"
HKR, Ndi\Interfaces,
DefLower,
0, "ethernet"
HKR, Ndi\Interfaces,
UpperRange,
0, "ndis3"
HKR, Ndi\Interfaces,
LowerRange,
0, "ethernet"
; Install sections
;HKR,Ndi\Install,ndis3,,"UsbDumpr_RT2870.install"
[win9x.CopyFiles]
RT2870QA.sys ; Win9x Installation
;*******************************************************************************************
; common regs for NT and W9x
;*******************************************************************************************
HKR,"Parameters","MaximumTransferSize",0x10001,4096
HKR,"Parameters","DebugLevel",0x10001,2
HKR,"Parameters","BulkUsbEnable",0x10001,1
;*******************************************************************************************
; DestinationDirs
;*******************************************************************************************
[DestinationDirs]
NT.CopyFiles=12
; system32\drivers subdirectory on NT
win9x.CopyFiles=11
[NT.CopyFiles]
; system32 subdirectory on win9x
RT2870QA.sys ; NT Installation
;RT2870.bin ; Binary file of firmware
[SourceDisksNames]
1=%INSTALL_DISK_STR%,,,
[SourceDisksFiles]
RT2870QA.sys=1
;*******************************************************************************************
; NT specific
;*******************************************************************************************
[UsbDumpr_RT2870.ndi.NT.reg]
HKR, Ndi,
Service,
0, "UsbDumpr_RT2870"
HKR, Ndi\Interfaces,
UpperRange,
0, "ndis5"
HKR, Ndi\Interfaces,
LowerRange,
0, "ethernet"
[UsbDumpr_RT2870.Service]
DisplayName=%UsbDumpr_RT2870.Service.DispName%
ServiceType=1
;%SERVICE_KERNEL_DRIVER%
StartType=3
;%SERVICE_AUTO_START%
ErrorControl=1
;%SERVICE_ERROR_NORMAL%
ServiceBinary=%12%\RT2870QA.sys
LoadOrderGroup=NDIS
[common.EventLog]
AddReg=common.AddEventLog.reg
[common.AddEventLog.reg]
HKR, , EventMessageFile,
0x00020000,"%%SystemRoot%%\System32\netevent.dll,%%SystemRoot%%\System32\drivers\RT2870QA.sys"
HKR, , TypesSupported, 0x00010001, 7
;*******************************************************************************************
; Strings
;*******************************************************************************************
[strings]
Provider=
"Ralink"
V_Provider=
"Ralink Technology Corp."
UsbDumpr_RT2870.DeviceDesc=
"RT2870 QATest USB WDM Driver"
UsbDumpr_RT2770.DeviceDesc=
"RT2770 QATest USB WDM Driver"
UsbDumpr_RT3070.DeviceDesc=
"RT3070 QATest USB WDM Driver"
UsbDumpr_RT3071.DeviceDesc=
"RT3071 QATest USB WDM Driver"
UsbDumpr_RT3072.DeviceDesc=
"RT3072 QATest USB WDM Driver"
UsbDumpr_RT2070.DeviceDesc=
"RT2070 QATest USB WDM Driver"
UsbDumpr_RT3572.DeviceDesc=
"RT3572 QATest USB WDM Driver"
UsbDumpr_RT3370.DeviceDesc=
"RT3370 QATest USB WDM Driver"
UsbDumpr_RT3573.DeviceDesc=
"RT3573 QATest USB WDM Driver"
UsbDumpr_RT8070.DeviceDesc=
"RT8070 QATest USB WDM Driver"
UsbDumpr_RT5370.DeviceDesc=
"RT5370 QATest USB WDM Driver"
UsbDumpr_RT5372.DeviceDesc=
"RT5372 QATest USB WDM Driver"
UsbDumpr_RT5572.DeviceDesc=
"RT5572 QATest USB WDM Driver"
UsbDumpr_RT2870.Service.DispName=
INSTALL_DISK_STR=
"RT2870 QATest USB WDM Driver Service"
"RT2870 QATest Wireless LAN Installation Disk"
Federal Communication Commission Interference Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate this equipment.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
This device is intended only for OEM integrators under the following conditions:
1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and
2) The transmitter module may not be co-located with any other transmitter or antenna.
As long as 2 conditions above are met, further transmitter test will not be required. However, the OEM integrator
is still responsible for testing their end-product for any additional compliance requirements required with this
module installed
IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop
configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid
and the FCC ID can not be used on the final product. In these circumstances, the OEM integrator will be
responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC
authorization.
End Product Labeling
This transmitter module is authorized only for use in device where the antenna may be installed such that 20 cm may
be maintained between the antenna and users. The final end product must be labeled in a visible area with the
following: “Contains FCC ID: RRK-WUSN26”. The grantee's FCC ID can be used only when all FCC compliance
requirements are met.
Manual Information To the End User
The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove
this RF module in the user’s manual of the end product which integrates this module.
The end user manual shall include all required regulatory information/warning as show in this manual.
Alpha Networks Proprietary and Confidential Information
Industry Canada statement:
This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Ce dispositif est conforme à la norme CNR-210 d'Industrie Canada applicable aux appareils radio exempts de licence. Son
fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage préjudiciable, et
(2) ce dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de provoquer un fonctionnement
indésirable.
Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment
should be installed and operated with minimum distance 20cm between the radiator & your body.
Déclaration d'exposition aux radiations:
Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé.
Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre
corps.
This device is intended only for OEM integrators under the following conditions: (For module device use)
1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and
2) The transmitter module may not be co-located with any other transmitter or antenna.
As long as 2 conditions above are met, further transmitter test will not be required. However, the OEM integrator is still
responsible for testing their end-product for any additional compliance requirements required with this module installed.
Cet appareil est conçu uniquement pour les intégrateurs OEM dans les conditions suivantes: (Pour utilisation de
dispositif module)
1) L'antenne doit être installée de telle sorte qu'une distance de 20 cm est respectée entre l'antenne et les utilisateurs, et
2) Le module émetteur peut ne pas être coïmplanté avec un autre émetteur ou antenne.
Tant que les 2 conditions ci-dessus sont remplies, des essais supplémentaires sur l'émetteur ne seront pas nécessaires.
Toutefois, l'intégrateur OEM est toujours responsable des essais sur son produit final pour toutes exigences de conformité
supplémentaires requis pour ce module installé.
Alpha Networks Proprietary and Confidential Information
10
IMPORTANT NOTE:
In the event that these conditions can not be met (for example certain laptop configurations or co-location with another
transmitter), then the Canada authorization is no longer considered valid and the IC ID can not be used on the final product.
In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter)
and obtaining a separate Canada authorization.
NOTE IMPORTANTE:
Dans le cas où ces conditions ne peuvent être satisfaites (par exemple pour certaines configurations d'ordinateur portable
ou de certaines co-localisation avec un autre émetteur), l'autorisation du Canada n'est plus considéré comme valide et l'ID
IC ne peut pas être utilisé sur le produit final. Dans ces circonstances, l'intégrateur OEM sera chargé de réévaluer le produit
final (y compris l'émetteur) et l'obtention d'une autorisation distincte au Canada.
End Product Labeling
This transmitter module is authorized only for use in device where the antenna may be installed such that 20 cm may be
maintained between the antenna and users. The final end product must be labeled in a visible area with the following:
“Contains IC: 4833A-WUSN26”.
Plaque signalétique du produit final
Ce module émetteur est autorisé uniquement pour une utilisation dans un dispositif où l'antenne peut être installée de telle
sorte qu'une distance de 20cm peut être maintenue entre l'antenne et les utilisateurs. Le produit final doit être étiqueté dans
un endroit visible avec l'inscription suivante: "Contient des IC: 4833A-WUSN26 ".
Manual Information To the End User
The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF
module in the user’s manual of the end product which integrates this module.
The end user manual shall include all required regulatory information/warning as show in this manual.
Manuel d'information à l'utilisateur final
L'intégrateur OEM doit être conscient de ne pas fournir des informations à l'utilisateur final quant à la façon d'installer ou
de supprimer ce module RF dans le manuel de l'utilisateur du produit final qui intègre ce module.
Le manuel de l'utilisateur final doit inclure toutes les informations réglementaires requises et avertissements comme indiqu
é dans ce manuel.
Europe – EU Declaration of Conformity
This device complies with the essential requirements of the R&TTE Directive 1999/5/EC. The following test methods have been
applied in order to prove presumption of conformity with the essential requirements of the R&TTE Directive 1999/5/EC:
EN 55022: 2010/ EN 55024: 2010
EN 301 489-1 V1.8.1 (2008-04) / EN 301 489-17 V2.1.1 (2009-05)
EN 300 328 V1.7.1: 2006
EN 62311: 2008
EN 60950-1 :2006 + A11:2009
This device is a 2.4 GHz wideband transmission system (transceiver), intended for use in all EU member states and EFTA countries,
except in France and Italy where restrictive use applies.
In Italy the end-user should apply for a license at the national spectrum authorities in order to obtain authorization to use the
device for setting up outdoor radio links and/or for supplying public access to telecommunications and/or network services.
This device may not be used for setting up outdoor radio links in France and in some areas the RF output power may be limited
to 10 mW EIRP in the frequency range of 2454 – 2483.5 MHz. For detailed information the end-user should contact the national
spectrum authority in France.
Alpha Networks Proprietary and Confidential Information
11
0081
Česky
[Czech]
[Jméno výrobce] tímto prohlašuje, že tento [typ zařízení] je ve shodě se základními požadavky a dalšími
příslušnými ustanoveními směrnice 1999/5/ES.
Dansk
[Danish]
Undertegnede [fabrikantens navn] erklærer herved, at følgende udstyr [udstyrets typebetegnelse] overholder
de væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF.
Deutsch
[German]
Hiermit erklärt [Name des Herstellers], dass sich das Gerät [Gerätetyp] in Übereinstimmung mit den
grundlegenden Anforderungen und den übrigen einschlägigen Bestimmungen der Richtlinie 1999/5/EG
befindet.
Eesti
[Estonian]
Käesolevaga kinnitab [tootja nimi = name of manufacturer] seadme [seadme tüüp = type of equipment]
vastavust direktiivi 1999/5/EÜ põhinõuetele ja nimetatud direktiivist tulenevatele teistele asjakohastele sätetele.
English
Hereby, [name of manufacturer], declares that this [type of equipment] is in compliance with the essential
requirements and other relevant provisions of Directive 1999/5/EC.
Español
[Spanish]
Por medio de la presente [nombre del fabricante] declara que el [clase de equipo] cumple con los requisitos
esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE.
Ελληνική
[Greek]
ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ [name of manufacturer] ΔΗΛΩΝΕΙ ΟΤΙ [type of equipment] ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ
ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ 1999/5/ΕΚ.
Français
[French]
Par la présente [nom du fabricant] déclare que l'appareil [type d'appareil] est conforme aux exigences
essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE.
Italiano
[Italian]
Con la presente [nome del costruttore] dichiara che questo [tipo di apparecchio] è conforme ai requisiti
essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE.
Latviski
[Latvian]
Ar šo [name of manufacturer / izgatavotāja nosaukums] deklarē, ka [type of equipment / iekārtas tips] atbilst
Direktīvas 1999/5/EK būtiskajām prasībām un citiem ar to saistītajiem noteikumiem.
Lietuvių
[Lithuanian]
Šiuo [manufacturer name] deklaruoja, kad šis [equipment type] atitinka esminius reikalavimus ir kitas 1999/5/EB
Direktyvos nuostatas.
Nederlands
[Dutch]
Hierbij verklaart [naam van de fabrikant] dat het toestel [type van toestel] in overeenstemming is met de
essentiële eisen en de andere relevante bepalingen van richtlijn 1999/5/EG.
Malti
[Maltese]
Hawnhekk, [isem tal-manifattur], jiddikjara li dan [il-mudel tal-prodott] jikkonforma mal-ħtiġijiet essenzjali u ma
provvedimenti oħrajn relevanti li hemm fid-Dirrettiva 1999/5/EC.
Magyar
[Hungarian]
Alulírott, [gyártó neve] nyilatkozom, hogy a [... típus] megfelel a vonatkozó alapvetõ követelményeknek és az
1999/5/EC irányelv egyéb elõírásainak.
Polski [Polish]
Niniejszym [nazwa producenta] oświadcza, że [nazwa wyrobu] jest zgodny z zasadniczymi wymogami oraz
pozostałymi stosownymi postanowieniami Dyrektywy 1999/5/EC.
Português
[Portuguese]
[Nome do fabricante] declara que este [tipo de equipamento] está conforme com os requisitos essenciais e
outras disposições da Directiva 1999/5/CE.
Slovensko
[Slovenian]
[Ime proizvajalca] izjavlja, da je ta [tip opreme] v skladu z bistvenimi zahtevami in ostalimi relevantnimi določili
direktive 1999/5/ES.
Slovensky
[Slovak]
[Meno výrobcu] týmto vyhlasuje, že [typ zariadenia] spĺňa základné požiadavky a všetky príslušné
ustanovenia Smernice 1999/5/ES.
Suomi
[Finnish]
[Valmistaja = manufacturer] vakuuttaa täten että [type of equipment = laitteen tyyppimerkintä] tyyppinen
laite on direktiivin 1999/5/EY oleellisten vaatimusten ja sitä koskevien direktiivin muiden ehtojen mukainen.
Svenska
[Swedish]
Härmed intygar [företag] att denna [utrustningstyp] står I överensstämmelse med de väsentliga
egenskapskrav och övriga relevanta bestämmelser som framgår av direktiv 1999/5/EG.
Alpha Networks Proprietary and Confidential Information
12
1.0 Scope
1.1 Document
This document is to specify the product requirements for Wifi module. This Card is based on Ralink chipset
that complied with IEEE 802.11b, IEEE 802.11g, IEEE 802.11n standard from 2.400~2.4835GHz, and it can be
used to provide up to 54Mbps for 802.11g, 11Mbps for 802.11b and 150Mbps for 802.11n to connect your
wireless LAN.
With seamless roaming, fully interoperability and advanced security with WEP standard, Wifi module offers
absolute interoperability with different vendors’ 802.11g, 802.11b and 802.11n Access Points through the
wireless LAN.
1.2 Product Features
Compatible with IEEE 802.11n draft standard to provide wireless 150Mbps data rate.
Compatible with IEEE 802.11g standard to provide wireless 54Mbps data rate
Compatible with IEEE 802.11b standard to provide wireless 11Mbps data rate
Operation at 2.400 ~ 2.835GHz frequency band to meet worldwide regulations
Dynamic date rate scaling at 6, 9, 12, 18, 24, 36, 48, 54 for IEEE 802.11g.
Dynamic date rate scaling at 1, 2, 5.5, and 11Mbps for IEEE 802.11b
Maximum reliability, throughput and connectivity with automatic data rate switching
Support wireless data encryption with 64/128-bit WEP for security
Support WEP, 802.1x, WPA and WPA2 enhanced security
High speed USB 2.0 interface
RoHS compliant
Integrated antenna
Alpha Networks Proprietary and Confidential Information
13
2.0 Requirements
The following sections identify the detailed requirements of the Wifi module.
2.1 Functional Block Diagram
3.3V
3.3V
1.5V
1.5V
TX
GND
GND
RT5370
Connector
D+
D+
D-
D-
GND
GND
RST
RX
RST
40 MHz Crystal
2.2 General Requirements
2.2.1 IEEE 802.11b Section
Feature
Detailed Description
2.2.1.1
2.2.1.2
Standard
Radio and
Modulation
Schemes
Operating
Frequency
Channel Numbers
IEEE 802.11b
DQPSK, DBPSK, DSSS, and CCK
2400 ~ 2483.5MHz ISM band
Data Rate
Media Access
Protocol
Transmitter
Output Power
before Antenna
Receiver
Sensitivity before
Antenna
11 channels for United States/ Canada
13 channels for Europe Countries
13 channels for Japan
11, 5.5, 2, and 1Mbps
CSMA/CA with ACK
2.2.1.3
2.2.1.4
2.2.1.5
2.2.1.6
2.2.1.7
2.2.1.8
Typical RF Output Power (tolerance:±2 dBm) and Data Rate
at each RF chain, at room Temp. 25degree C
10 dBm
Typical Sensitivity at Which Frame (1000-byte PDUs) Error Rate
= 10%
-89 dBm at 1Mbps
-86 dBm at 2Mbps
-85 dBm at 5.5Mbps
-76 dBm at 11Mbps
2.2.2 IEEE 802.11g Section
Feature
Detailed Description
2.2.2.1
2.2.2.2
Standard
Radio and
Modulation Type
Operating
Frequency
y IEEE 802.11g
y BPSK, QPSK, 16QAM, 64QAM with OFDM
2.2.2.3
y 2400 ~ 2483.5MHz ISM band
Alpha Networks Proprietary and Confidential Information
14
#
Feature
Detailed Description
2.2.2.4
Channel Numbers
2.2.2.5
2.2.2.6
Data Rate
Media Access
Protocol
Transmitter Output
Power before
Antenna
Receiver
Sensitivity before
Antenna
y 11 channels for United States/ Canada
13 channels for Europe Countries
13 channels for Japan
y 6,9,12,18,24,36,48,54Mbps
y CSMA/CA with ACK
2.2.2.7
2.2.2.8
Typical RF Output Power (tolerance : ±2 dBm) and Data Rate
at each RF chain, at room Temp. 25degree C
10 dBm
Typical Sensitivity at Which Frame (1000-byte PDUs) Error Rate
= 10%
-82 dBm at 6Mbps
-81 dBm at 9Mbps
-79 dBm at 12Mbps
-77 dBm at 18Mbps
-74 dBm at 24Mbps
-70 dBm at 36Mbps
-66 dBm at 48Mbps
-65 dBm at 54Mbps
2.2.3 IEEE 802.11 final n Section
Feature
Detailed Description
2.2.3.1
2.2.3.2
Standard
Radio and
Modulation Type
Operating
Frequency
Data Rate
y Final n
y BPSK, QPSK, 16QAM, 64QAM with OFDM
2.2.3.3
2.2.3.4
y 2400 ~ 2483.5MHz ISM band
y TX: MCS0 ~ MCS7
y RX: MCS0 ~ MCS7
MCS
GI=800ns
20MHz
2.2.3.5
2.2.3.6
2.2.3.7
Media Access
Protocol
Transmitter Output
Power before
Antenna
Receiver
Sensitivity before
Antenna
6.5
13
19.5
26
39
52
58.5
65
y CSMA/CA with ACK
GI=400ns
40MHz
20MHz
40MHz
13.5
27
40.5
54
81
108
121.5
135
7.2
14.4
21.7
28.9
43.3
57.8
65.0
72.2
15
30
45
60
90
120
135
150
Typical RF Output Power (tolerance : ±2 dBm) and Data Rate at
each RF chain, at room Temp. 25degree C
y 10 dBm
y Typical Sensitivity at Which Frame (1000-byte PDUs) Error Rate
≤ 10%
HT20
y -80 dBm at MCS0
y -77 dBm at MCS1
y -75 dBm at MCS2
y -72 dBm at MCS3
y -68 dBm at MCS4
y -64 dBm at MCS5
Alpha Networks Proprietary and Confidential Information
15
#
Feature
Detailed Description
y -63 dBm at MCS6
y -62 dBm at MCS7
HT40
y -79 dBm at MCS0
y -76 dBm at MCS1
y -74 dBm at MCS2
y -71 dBm at MCS3
y -68 dBm at MCS4
y -64 dBm at MCS5
y -62 dBm at MCS6
y -60 dBm at MCS7
2.2.4 General Section
Feature
Detailed Description
2.2.4.1
2.2.4.2
2.2.4.3
Antenna Type
Operating Voltage
Current
Consumption
USB
2.2.4.4
Integrated antenna
3.3VDC+/- 10%
3.3V:240 mA
1.5V:210 mA
High Speed USB2.0 Interface
2.3 Mechanical Requirements
Feature
Detailed Description
2.3.1
2.3.2
2.3.3
Length
Width
Height
28mm (PCBA) (include place for screw) (customer spec)
13mm (PCBA) (customer spec)
3mm (PCBA) (customer spec)
2.4 Requirements of Reliability, Maintainability and Quality
Feature
Detailed Description
2.4.1
MTBF
Mean Time Between Failure > 30,000 hours
Alpha Networks Proprietary and Confidential Information
16
#
Feature
Detailed Description
2.4.2
Maintainability
2.4.3
Quality
There is no scheduled preventive maintenance
required
The product quality is followed-up by ALPHA factory
quality control system
2.5 Environmental Requirements
Feature
2.5.1
Operating
Temperature
Conditions
Non-Operating
Temperature
Conditions
Operating
Humidity
conditions
Non-Operating
Humidity
Conditions
2.5.2
2.5.3
2.5.4
Detailed Description
The product is capable of continuous reliable
operation when operating in ambient temperature of
0 ℃ to +55 ℃
Neither subassemblies is damaged nor the
operational performance is degraded when restored
to the operating temperature after exposing to
storage temperature in the range of –20 ℃ to +75 ℃.
The product is capable of continuous reliable
operation when subjected to relative humidity in the
range of 10% and 90% non-condensing.
The product is not damaged nor the performance is
degraded after exposure to relative humidity ranging
from 5% to 95% non-condensing
2.6 Regulatory
FCC, IC, TELEC, CE…etc
Alpha Networks Proprietary and Confidential Information
17

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Extract, Print high-res
XMP Toolkit                     : 3.1-701
Format                          : application/pdf
Creator                         : sam
Title                           : Microsoft Word - User's guide
Create Date                     : 2011:11:09 14:18+08:00
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2011:11:14 13:46+08:00
Metadata Date                   : 2011:11:14 13:46+08:00
Producer                        : Acrobat Distiller 8.1.0 (Windows)
Document ID                     : uuid:a824bac1-e208-4cfb-a181-8fd3e096c2c4
Instance ID                     : uuid:51bdef4b-170c-4ae8-a803-2823907994e2
Page Count                      : 17
Author                          : sam
EXIF Metadata provided by EXIF.tools
FCC ID Filing: RRKWUSN26

Navigation menu