Alutron Modules CM91 Two Way Wireless Transceiver Module User Manual CM91 two way wireless transmitters

Download:
Mirror Download [FCC.gov]
Document ID	957448
Application ID	Xh26K663r+MQjjseAGYUGA==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	1.37kB (17066 bits)
Date Submitted	2008-06-18 00:00:00
Date Available	2008-06-18 00:00:00
Creation Date	2008-05-15 14:40:21
Producing Software	Acrobat Distiller 6.0.1 (Windows)
Document Lastmod	2008-05-15 14:40:40
Document Title	CM91 two way wireless transmitters
Document Creator	Acrobat PDFMaker 6.0 for Word
Document Author:	Dan Paul

CM91 two way wireless transmitters
User and Installation Guide
Installation: Mount the CM91 master into the socket of the hose handle by pressing it in. secure
in place with a dab of silicone glue and attaché the battery to the battery drawer.
Mount the CM91 slave into the power unit of the central vacuum system. Locate its socket and
push the module in; finish by securing the module with a dab of silicone glue.
Programming and testing: In order to operate the master and the slave must be paired. Locate
the slave “learn” button and hold in depress it for 2 seconds until the green LED turns on. Within
30 seconds press the ON button of the master unit.
The slave will blink once indicating that the pairing was successful and then turn OFF.
Operation: Operate the ON/OFF button of the master several times to acknowledge that the unit
functions properly by turning the power unit On and OFF.
Warning: Changes or modifications not expressly approved by Alutron Modules Inc. could void
the user’s authority to operate the equipment.
Unauthorized changes or modifications to the equipment could void the user’s authority to
operate the equipment.
Federal Communications Commission (FCC) Statement: This equipment has been tested and
found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced technician for help.
Properly shielded and grounded cables and connectors must be used to meet FCC emission limits.
Alutron Modules Inc. is not responsible for any radio or television interference caused by using
other than recommended cables or connectors.
These devices comply with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) These devices may not cause harmful interference, and (2) these devices must
accept any interference received, including interference that may cause undesired operation.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Page Count                      : 1
Language                        : EN-US
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:567c4b83-94fc-43dc-9aa9-170ea2b06437
Producer                        : Acrobat Distiller 6.0.1 (Windows)
Company                         : Alutron Modules Inc.
Source Modified                 : D:20080515183257
Headline                        : 
Create Date                     : 2008:05:15 14:40:21-04:00
Creator Tool                    : Acrobat PDFMaker 6.0 for Word
Modify Date                     : 2008:05:15 14:40:40-04:00
Metadata Date                   : 2008:05:15 14:40:40-04:00
Document ID                     : uuid:5f117760-0d4c-4905-91f4-94fec1e1b865
Version ID                      : 2
Format                          : application/pdf
Title                           : CM91 two way wireless transmitters
Creator                         : Dan Paul
Subject                         : 
Tagged PDF                      : Yes
Author                          : Dan Paul

EXIF Metadata provided by EXIF.tools