Alvarion Technologies EXTR-58 BreezeMax Extreme 5.8 Base Station User Manual BreezeMAX Extreme System Manual

Alvarion Technologies Ltd. BreezeMax Extreme 5.8 Base Station BreezeMAX Extreme System Manual

UserManual.wiki >

Alvarion Technologies >

EXTR 58 User Manual

Users Manual

BreezeMAX® ExtremeSystem ManualSoftware Version 1.1June 2009P/N 215311

Document HistoryBreezeMAX Extreme ii System ManualDocument HistoryTopic Description Date IssuedPreliminary Release for Early Field TrialsNew System Manual March 2009Preliminary Release for Beta New System Manual June 2009First Release for GA New System Manual June 2009

Legal RightsBreezeMAX Extreme iv System Manualremedy, repair or replace any defective Product in accordance with Alvarion' standard R&R procedure.(b) With respect to the Firmware, Alvarion warrants the correct functionality according to the attached documentation, for a period of fourteen (14) month from invoice date (the “Warranty Period”). During the Warranty Period, Alvarion may release to its Customers firmware updates, which include additional performance improvements and/or bug fixes, upon availability (the “Warranty”). Bug fixes, temporary patches and/or workarounds may be supplied as Firmware updates. Additional hardware, if required, to install or use Firmware updates must be purchased by the Customer. Alvarion will be obligated to support solely the two (2) most recent Software major releases. ALVARION SHALL NOT BE LIABLE UNDER THIS WARRANTY IF ITS TESTING AND EXAMINATION DISCLOSE THAT THE ALLEGED DEFECT IN THE PRODUCT DOES NOT EXIST OR WAS CAUSED BY PURCHASER'S OR ANY THIRD PERSON'S MISUSE, NEGLIGENCE, IMPROPER INSTALLATION OR IMPROPER TESTING, UNAUTHORIZED ATTEMPTS TO REPAIR, OR ANY OTHER CAUSE BEYOND THE RANGE OF THE INTENDED USE, OR BY ACCIDENT, FIRE, LIGHTNING OR OTHER HAZARD.Disclaimer(a) The Software is sold on an “AS IS” basis. Alvarion, its affiliates or its licensors MAKE NO WARRANTIES, WHATSOEVER, WHETHER EXPRESS OR IMPLIED, WITH RESPECT TO THE SOFTWARE AND THE ACCOMPANYING DOCUMENTATION. ALVARION SPECIFICALLY DISCLAIMS ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT WITH RESPECT TO THE SOFTWARE. UNITS OF PRODUCT (INCLUDING ALL THE SOFTWARE) DELIVERED TO PURCHASER HEREUNDER ARE NOT FAULT-TOLERANT AND ARE NOT DESIGNED, MANUFACTURED OR INTENDED FOR USE OR RESALE IN APPLICATIONS WHERE THE FAILURE, MALFUNCTION OR INACCURACY OF PRODUCTS CARRIES A RISK OF DEATH OR BODILY INJURY OR SEVERE PHYSICAL OR ENVIRONMENTAL DAMAGE (“HIGH RISK ACTIVITIES”). HIGH RISK ACTIVITIES MAY INCLUDE, BUT ARE NOT LIMITED TO, USE AS PART OF ON-LINE CONTROL SYSTEMS IN HAZARDOUS ENVIRONMENTS REQUIRING FAIL-SAFE PERFORMANCE, SUCH AS IN THE OPERATION OF NUCLEAR FACILITIES, AIRCRAFT NAVIGATION OR COMMUNICATION SYSTEMS, AIR TRAFFIC CONTROL, LIFE SUPPORT MACHINES, WEAPONS SYSTEMS OR OTHER APPLICATIONS REPRESENTING A SIMILAR DEGREE OF POTENTIAL HAZARD. ALVARION SPECIFICALLY DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR HIGH RISK ACTIVITIES.

Legal RightsBreezeMAX Extreme v System Manual(b) PURCHASER'S SOLE REMEDY FOR BREACH OF THE EXPRESS WARRANTIES ABOVE SHALL BE REPLACEMENT OR REFUND OF THE PURCHASE PRICE AS SPECIFIED ABOVE, AT ALVARION'S OPTION. TO THE FULLEST EXTENT ALLOWED BY LAW, THE WARRANTIES AND REMEDIES SET FORTH IN THIS AGREEMENT ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, EITHER IN FACT OR BY OPERATION OF LAW, STATUTORY OR OTHERWISE, INCLUDING BUT NOT LIMITED TO WARRANTIES, TERMS OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, SATISFACTORY QUALITY, CORRESPONDENCE WITH DESCRIPTION, NON-INFRINGEMENT, AND ACCURACY OF INFORMATION GENERATED. ALL OF WHICH ARE EXPRESSLY DISCLAIMED. ALVARION' WARRANTIES HEREIN RUN ONLY TO PURCHASER, AND ARE NOT EXTENDED TO ANY THIRD PARTIES. ALVARION NEITHER ASSUMES NOR AUTHORIZES ANY OTHER PERSON TO ASSUME FOR IT ANY OTHER LIABILITY IN CONNECTION WITH THE SALE, INSTALLATION, MAINTENANCE OR USE OF ITS PRODUCTS.Limitation of Liability(a) ALVARION SHALL NOT BE LIABLE TO THE PURCHASER OR TO ANY THIRD PARTY, FOR ANY LOSS OF PROFITS, LOSS OF USE, INTERRUPTION OF BUSINESS OR FOR ANY INDIRECT, SPECIAL, INCIDENTAL, PUNITIVE OR CONSEQUENTIAL DAMAGES OF ANY KIND, WHETHER ARISING UNDER BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), STRICT LIABILITY OR OTHERWISE AND WHETHER BASED ON THIS AGREEMENT OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.(b) TO THE EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL THE LIABILITY FOR DAMAGES HEREUNDER OF ALVARION OR ITS EMPLOYEES OR AGENTS EXCEED THE PURCHASE PRICE PAID FOR THE PRODUCT BY PURCHASER, NOR SHALL THE AGGREGATE LIABILITY FOR DAMAGES TO ALL PARTIES REGARDING ANY PRODUCT EXCEED THE PURCHASE PRICE PAID FOR THAT PRODUCT BY THAT PARTY (EXCEPT IN THE CASE OF A BREACH OF A PARTY'S CONFIDENTIALITY OBLIGATIONS).Radio Frequency Interference StatementThe Base Transceiver Station (BTS) equipment has been tested and found to comply with the limits for a class A digital device, pursuant to ETSI EN 301 489-1 rules and Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in commercial, business and industrial environments. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is

Legal RightsBreezeMAX Extreme vi System Manuallikely to cause harmful interference in which case the user will be required to correct the interference at the user's own expense.FCC Radiation Hazard Warning To comply with FCC RF exposure requirements in Section 1.1307 and 2.1091 of FCC Rules, the antenna used for this transmitter must be fixed-mounted on outdoor permanent structures with a separation distance of at least 2 meter from all persons.R&TTE Compliance StatementThis equipment complies with the appropriate essential requirements of Article 3 of the R&TTE Directive 1999/5/EC.Safety Considerations - GeneralFor the following safety considerations, “Instrument” means the BreezeMAX units' components and their cables.GroundingBTS chassis, Power Feeders and Outdoor Units are required to be bonded to protective grounding using the bonding stud or screw provided with each unit. Safety Considerations - DC Powered EquipmentRestricted Access Area: The DC powered equipment should only be installed in a Restricted Access Area.Installation Codes: The equipment must be installed according to the latest edition of the country national electrical codes. For North America, equipment must be installed in accordance with the US National Electrical Code and the Canadian Electrical Code.Overcurrent Protection: A readily accessible Listed branch circuit overcurrent protective device, rated 60A for the BTS or 20A for the Power Feeder, must be incorporated in the building wiring.CAUTION: This equipment is designed to permit connection between the earthed conductor of the DC supply circuit and the grounding conductor at the equipment. See installation instructions.CAUTION ATTENTIONRisk of electric shock and energy hazard. Risque de décharge électrique et d'electrocution.

Legal RightsBreezeMAX Extreme vii System ManualThe equipment must be connected directly to the DC Supply System grounding electrode conductor.All equipment in the immediate vicinity must be grounded in the same way, and not be grounded elsewhere.The DC supply system is to be local, i.e. within the same premises as the equipment.There shall be no disconnect device between the grounded circuit conductor of the DC source (return) and the point of connection of the grounding electrode conductor.CautionTo avoid electrical shock, do not perform any servicing unless you are qualified to do so.Line VoltageBefore connecting this instrument to the power line, make sure that the voltage of the power source matches the requirements of the instrument.RadioThe instrument transmits radio energy during normal operation. To avoid possible harmful exposure to this energy, do not stand or work for extended periods of time in front of its antenna. The long-term characteristics or the possible physiological effects of radio frequency electromagnetic fields have not been yet fully investigated.Outdoor Units and Antennas Installation and GroundingEnsure that outdoor units, antennas and supporting structures are properly installed to eliminate any physical hazard to either people or property. Make sure that the installation of the outdoor unit, antenna and cables is performed in accordance with all relevant national and local building and safety codes. Even where grounding is not mandatory according to applicable regulation and national codes, it is highly recommended to ensure that the outdoor unit and the antenna mast (when using external antenna) are grounded and suitable lightning protection devices are used so as to provide protection against voltage surges and static charges. In any event, Alvarion is not liable for any injury, damage or regulation violations associated with or caused by installation, grounding or lightning protection.

Legal RightsBreezeMAX Extreme viii System ManualDisposal of Electronic and Electrical WasteDisposal of Electronic and Electrical WastePursuant to the WEEE EU Directive electronic and electrical waste must not be disposed of with unsorted waste. Please contact your local recycling authority for disposal of this product.

Important NoticeBreezeMAX Extreme ix System ManualImportant NoticeThis user manual is delivered subject to the following conditions and restrictions:This manual contains proprietary information belonging to Alvarion Ltd. Such information is supplied solely for the purpose of assisting properly authorized users of the respective Alvarion products.No part of its contents may be used for any other purpose, disclosed to any person or firm or reproduced by any means, electronic and mechanical, without the express prior written permission of Alvarion Ltd.The text and graphics are for the purpose of illustration and reference only. The specifications on which they are based are subject to change without notice.The software described in this document is furnished under a license. The software may be used or copied only in accordance with the terms of that license.Information in this document is subject to change without notice. Corporate and individual names and data used in examples herein are fictitious unless otherwise noted.Alvarion Ltd. reserves the right to alter the equipment specifications and descriptions in this publication without prior notice. No part of this publication shall be deemed to be part of any contract or warranty unless specifically incorporated by reference into such contract or warranty. The information contained herein is merely descriptive in nature, and does not constitute an offer for the sale of the product described herein.Any changes or modifications of equipment, including opening of the equipment not expressly approved by Alvarion Ltd. will void equipment warranty and any repair thereafter shall be charged for. It could also void the user's authority to operate the equipment.Some of the equipment provided by Alvarion and specified in this manual, is manufactured and warranted by third parties. All such equipment must be installed and handled in full compliance with the instructions provided by such manufacturers as attached to this manual or provided thereafter by Alvarion or the manufacturers. Non-compliance with such instructions may result in serious

Important NoticeBreezeMAX Extreme x System Manualdamage and/or bodily harm and/or void the user's authority to operate the equipment and/or revoke the warranty provided by such manufacturer.

About This ManualBreezeMAX Extreme xi System ManualAbout This ManualThis manual describes the BreezeMAX Extreme solution, and details how to install, operate and manage the BTS system components.This manual is intended for technicians responsible for installing, setting and operating the BreezeMAX Extreme BTS equipment, and for system administrators responsible for managing the system.This manual contains the following chapters and appendices:Chapter 1 - System description: Describes the BreezeMAX Extreme BTS and its components.Chapter 2 - Installation: Describes how to install the BTS components.Chapter 3 - Commissioning: Describes how to configure basic parameters and validate units' operation.Chapter 4 - Operation and Administration Using the CLI: Describes how to use the Command Line Interface (CLI) for configuring parameters, checking system status and monitoring performance. Glossary: A listing of commonly used terms.

ContentsBreezeMAX Extreme xii System ManualContentsChapter 1 - System Description1.1 About WiMAX................................................................................................................31.2 WiMAX Network Architecture......................................................................................41.2.1 The WiMAX Network Reference Model ..............................................................41.2.2 Access Service Network (ASN)...........................................................................51.2.3 Connectivity Service Network (CSN) ..................................................................61.2.4 Network Access Provider (NAP) .........................................................................61.2.5 Network Service Provider (NSP).........................................................................61.2.6 Base Station (BS)................................................................................................71.2.7 ASN Gateway (ASN-GW) ...................................................................................71.2.8 Reference Points.................................................................................................91.3 BreezeMAX Extreme ..................................................................................................111.3.1 General .............................................................................................................111.3.2 System Components.........................................................................................121.3.3 System Configurations ......................................................................................131.3.4 Power Supply ....................................................................................................141.3.5 Radio Antennas.................................................................................................141.3.6 GPS Antenna ....................................................................................................151.4 Specifications.............................................................................................................161.4.1 General Modem & Radio...................................................................................161.4.2 3.5 GHz BTS .....................................................................................................161.4.3 5 GHz BTS ........................................................................................................171.4.4 Sensitivity ..........................................................................................................19

ContentsBreezeMAX Extreme xiii System Manual1.4.5 3.x GHz Antennas .............................................................................................191.4.6 5 GHz Antennas................................................................................................201.4.7 Power Supply ....................................................................................................211.4.8 GPS Antennas ..................................................................................................221.4.9 Data Communication (Ethernet Port) ................................................................221.4.10 Configuration and Management........................................................................221.4.11 Environmental ...................................................................................................231.4.12 BTS Standards Compliance, General ...............................................................23Chapter 2 - Installation 2.1 BTS Installation ..........................................................................................................272.1.1 Installation Requirements..................................................................................272.1.2 Assembling the Tilt Bracket on the BTS............................................................292.1.3 Installing a Lightening Arrestor for the High-Gain GPS Antenna ......................312.1.4 Installing the BTS on a Pole..............................................................................312.1.5 Mounting the BTS on the Carriage....................................................................342.1.6 Wall Mount Installation ......................................................................................362.2 GPS Installation..........................................................................................................382.2.1 Installation Requirements..................................................................................382.2.2 Packing List.......................................................................................................382.2.3 Installing the GPS .............................................................................................392.3 Indoor Power Supply Installation .............................................................................422.3.1 High Power AC/DC Power Supply Unit.............................................................422.3.2 PoE AC/DC Power Supply ................................................................................432.4 Cable Connections.....................................................................................................442.4.1 Cable Connection..............................................................................................462.5 External Antennas Connection.................................................................................49

ContentsBreezeMAX Extreme xiv System ManualChapter 3 - Commissioning3.1 Configuring Parameters Required for Remote Management.................................523.2 Operation Verification................................................................................................54Chapter 4 - Operation and Administration4.1 BreezeMAX Extreme System Management..............................................................584.2 The Monitor Program.................................................................................................594.2.1 Accessing the Monitor Program ........................................................................594.2.2 Using the Monitor Program ...............................................................................594.3 IP Addresses Configuration......................................................................................624.3.1 IP Address Configuration Restrictions ..............................................................624.3.2 IP Subnets.........................................................................................................624.4 The Main Menu ...........................................................................................................634.5 BTS Menu....................................................................................................................644.5.1 Show Summary.................................................................................................644.5.2 Show Properties................................................................................................664.5.3 Configuration.....................................................................................................684.5.4 Unit Control .......................................................................................................814.5.5 Fault Management ............................................................................................874.5.6 Performance Counters ......................................................................................924.6 ASN-GW Menu............................................................................................................954.6.1 AAA ...................................................................................................................954.6.2 Services Menu ................................................................................................1054.7 Sector Menu..............................................................................................................1214.7.1 Show Summary...............................................................................................1214.7.2 Select ..............................................................................................................1244.8 BS Menu....................................................................................................................133

ContentsBreezeMAX Extreme xv System Manual4.8.1 Show Summary...............................................................................................1334.8.2 Select ..............................................................................................................1384.9 Radio Channel Menu................................................................................................1534.9.1 Show Summary...............................................................................................1534.9.2 Select ..............................................................................................................1534.10Antenna Menu..........................................................................................................1554.10.1 Show Summary...............................................................................................1554.10.2 Select ..............................................................................................................1564.11GPS Menu.................................................................................................................1584.11.1 Show Summary...............................................................................................1584.11.2 Configuration...................................................................................................1604.12MS Menu...................................................................................................................1654.12.1 Show Summary...............................................................................................1654.12.2 Show Concise Summary.................................................................................1664.12.3 Show Summary by BS ....................................................................................1664.12.4 Show Concise Summary by BS ......................................................................1674.12.5 Select By MAC ................................................................................................1674.12.6 Add..................................................................................................................1694.13Parameters Summary..............................................................................................170Glossary................................................................................................184

1ChapterSystem Description

Chapter 1 - System DescriptionBreezeMAX Extreme 2 System ManualIn This Chapter:“About WiMAX” on page 3“WiMAX Network Architecture” on page 4“BreezeMAX Extreme” on page 11“Specifications” on page 16

Chapter 1 - System Description About WiMAXBreezeMAX Extreme 3 System Manual1.1 About WiMAXEmanating from the broadband world and using all-IP architecture, mobile WiMAX is the leading technology for implementing personal broadband services. With huge market potential and affordable deployment costs, mobile WiMAX is on the verge of a major breakthrough. No other technology offers a full set of chargeable and differentiated voice, data, and premium video services in a variety of wireless fashions - fixed, portable and mobile - that increase revenue and reduce subscriber churn.WiMAX technology is the solution for many types of high-bandwidth applications at the same time across long distances and will enable service carriers to converge the all-IP-based network for triple-play services data, voice, and video.WiMAX with its QoS support, longer reach, and high data capacity is positioned for fixed broadband access applications in rural areas, particularly when distance is too large for DSL and cable, as well as in urban/suburban areas of developing countries. Among applications for residential are high speed Internet, Voice Over IP telephony and streaming video/online gaming with additional applications for enterprise such as Video conferencing, Video surveillance and secured Virtual Private Network (with need for high security). WiMAX technology allows covering applications with media content requesting more bandwidth.WiMAX allows portable and mobile access applications, with incorporation in notebook computers and PDAs, allowing for urban areas and cities to become “metro zones” for portable and mobile outdoor broadband wireless access. As such WiMAX is the natural complement to 3G networks by offering higher bandwidth and to Wi-Fi networks by offering broadband connectivity in larger areas.The WiMAX Forum is an organization of leading operators and communications component and equipment companies. The WiMAX Forum’s charter is to promote and certify the compatibility and interoperability of broadband wireless access equipment that conforms to the Institute for Electrical and Electronics Engineers (IEEE) 802.16 and ETSI HiperMAN standards. The ultimate goal of the WiMAX Forum is to accelerate the introduction of cost-effective broadband wireless access services into the marketplace. Standards-based, interoperable solutions enable economies of scale that, in turn, drive price and performance levels unachievable by proprietary approaches, making WiMAX Forum Certified products.

Chapter 1 - System Description WiMAX Network ArchitectureBreezeMAX Extreme 4 System Manual1.2 WiMAX Network Architecture1.2.1 The WiMAX Network Reference ModelFigure 1-1 shows the basic mobile WiMAX network architecture as defined by the WiMAX Forum NWG..Figure 1-2 shows the ASN-GW architecture for networks with multiple ASN-GWs (distributed network architecture).Figure 1-1: Mobile WiMAX Network Reference Model

Chapter 1 - System Description WiMAX Network ArchitectureBreezeMAX Extreme 5 System Manual The various components and entities involved in the networking architecture are described in the following sections:1.2.2 Access Service Network (ASN)An ASN is defined as a complete set of network functions needed to provide radio access to a WiMAX subscriber. The ASN provides the following mandatory functions:WiMAX Layer-2 (L2) connectivity with WiMAX mobile station (MS) Transfer of AAA messages to the WiMAX subscriber's home network service provider (H-NSP) for authentication, authorization and session accounting for subscriber sessionsNetwork discovery and selection of the WiMAX subscriber's preferred NSPRelay functionality for establishing Layer-3 (L3) connectivity with a WiMAX MS (i.e. IP address allocation)Radio resource managementASN-CSN tunnelingFigure 1-2: ASN Reference Model containing Multiple ASN-GWs

Chapter 1 - System Description WiMAX Network ArchitectureBreezeMAX Extreme 6 System ManualASN anchored mobilityAn ASN is comprised of network elements such as one or more base transceiver stations and one or more ASN gateways. An ASN may be shared by more than one connectivity service network (CSN).1.2.3 Connectivity Service Network (CSN)A CSN is defined as a set of network functions that provide IP connectivity services to WiMAX subscribers. A CSN may offer the following functions:MS IP address and endpoint parameter allocation for user sessionsInternet accessAAA proxy or serverPolicy and admission control based on user subscription profilesASN-CSN tunneling supportWiMAX subscriber billing and inter-operator settlementWiMAX services such as location-based services, connectivity for peer-to-peer services, provisioning, authorization and/or connectivity to IP multimedia services, and facilities to support lawful intercept services such as those compliant with Communications Assistance Law Enforcement Act (CALEA) proceduresA CSN is comprised of network elements such as routers, proxy/servers, user databases, and inter-working gateway devices.1.2.4 Network Access Provider (NAP)An NAP is a business entity that provides WiMAX radio access infrastructure to one or more WiMAX network service providers (NSPs). A NAP implements this infrastructure using one or more ASNs.1.2.5 Network Service Provider (NSP)An NSP is a business entity that provides IP connectivity and WiMAX services to WiMAX subscribers compliant with the established service level agreement. The NSP concept is an extension of the Internet service provider (ISP) concept, providing network services beyond Internet access. To provide these services, an

Chapter 1 - System Description WiMAX Network ArchitectureBreezeMAX Extreme 8 System ManualGeneration of authentication key materialQoS service flow authorization entityAAA accounting clientThe basic EP functionality of the ASN-GW includes:Classification of downlink data into generic routing encapsulation (GRE) tunnelsPacket header suppression functionalityDHCP functionalityHandover functionalityThe WIMAX Forum NWG has adopted two different approaches for ASN architecture - centralized and distributed: In the centralized approach there is at least one central ASN-GW, and the BTS operates in transparent mode, as shown in Figure 1-3. Figure 1-3: Centralized Network Reference Model

Chapter 1 - System Description WiMAX Network ArchitectureBreezeMAX Extreme 10 System ManualReference point R3 consists of the set of control plane protocols between the ASN and CSN to support AAA, policy enforcement and mobility management capabilities. It also encompasses the bearer plane methods (e.g. tunneling) to transfer user data between the ASN and CSN.Reference point R4 consists of the set of control and bearer plane protocols originating/terminating in various functional entities of an ASN that coordinate MS mobility between ASNs and ASN-GWs. R4 is the only interoperable reference point between similar or heterogeneous ASNs.Reference point R5 consists of the set of control plane and bearer plane protocols for internet working between the CSN operated by the home NSP and that operated by a visited NSP.Reference point R6 consists of the set of control and bearer plane protocols for communication between the BS and ASN-GW. The bearer plane consists of an intra-ASN data path between the BS and ASN gateway. The control plane includes protocols for data path establishment, modification and release control in accordance with the MS mobility events.Reference point R8 consists of the set of control plane message flows and optional bearer plane data flows between the base stations to ensure a fast and seamless handover. The bearer plane consists of protocols that allow data transfer between base stations involved in the handover of a certain MS. It is important to note that all reference points are logical and do not necessarily imply a physical or even direct connection. For instance, the R4 reference point between ASN-GWs might be implemented across the NAP internal transport IP network, in which case R4 traffic might traverse several routers from the source to the destination ASN-GW.

Chapter 1 - System Description BreezeMAX ExtremeBreezeMAX Extreme 11 System Manual1.3 BreezeMAX Extreme1.3.1 GeneralBreezeMAX Extreme is a full-outdoor, all-in-one small WiMAX Base Transceiver Station. With a range of configuration options for rural, urban and suburban deployments, and all the benefits of Alvarion’s Open WiMAX Ecosystem, the BreezeMAX Extreme system present an exceptionally attractive cost/performance ratio for various needs, improving operational costs and reducing complexity.The system is currently available in the following frequency bands:3.x GHz band: Offering optimal solutions for capacity limited scenarios and rural areas or highly price sensitive situations. Co-existence with the 4Motion Macro BTS supports expansion of Macro deployments providing optimization of both initial and final investment. Currently available units operate in the 3.400-3.600 GHz (3.5 GHz) band.5 GHz band units: Offering all the advantages of WiMAX, providing carrier class QoS with superior radio technology and leveraging the benefits of mass market ecosystem (low price CPEs). Co-existence with the mature BreezeACCESS VL product line. Currently available units operate in the 4.900-5.470 GHz (4.9 GHz) band and 5.470-5.950 GHz (5.4 GHz) band. Actually available frequencies and other operational capabilities depend on the applicable local regulations.BreezeMAX Extreme supports different working modes:Embedded Distributed ASN-GW Authenticated: The ASN-GW functionality resides in the BTS (distributed architecture). MS authentication and services provisioning are managed by an external AAA server.Embedded Distributed ASN-GW Not Authenticated: The ASN-GW functionality resides in the BTS (distributed architecture). MS authentication and services provisioning are managed by the ASN-GW using local configuration (AAA server not needed).External ASN-GW: The ASN-GW is a separate entity (centralized architecture) that communicates with the BTS over R6 interface. MS authentication and services provisioning are managed by a AAA server.

Chapter 1 - System Description BreezeMAX ExtremeBreezeMAX Extreme 12 System ManualThe BTS can simultaneously serve up to 50 CPEs, with optional upgrades to support up to 150 or 250 CPEs.The following figure describes the end-to-end BreezeMAX Extreme based WiMAX network:1.3.2 System ComponentsThe BreezeMAX Extreme system consists of the following elements:BreezeMAX Extreme Base Transceiver Station (BTS) and associated accessories such as GPS antenna, indoor power supply and, (if applicable) external antennas.External ASN-GW for centralized architecture and optional Embedded ASN-GW for distributed architecture.Optional AAA server for central authentication, authorization and accounting services.Outdoor and indoor CPEs supporting VoIP, Data, Switching, Bridging, tagging and marking functionality.Figure 1-5: BreezeMAX Extreme System Architecture

Chapter 1 - System Description BreezeMAX ExtremeBreezeMAX Extreme 13 System ManualAlvariSTAR central management system allowing multiple elements management and performance monitoring.StarACS – Automatic Configuration Server for TR-069 based management and monitoring of CPEs. AlvariCRAFT element management system allowing a single element management for BTS installation/maintenance.1.3.3 System ConfigurationsIn the current release the following BTS configurations are available:1.3.3.1 Single Sector, Second Order Diversity ConfigurationsSingle Sector Second Order Diversity (1DIV models) units include a BS connected to two internal radios with either an integral dual-slant antenna or two RF connections to external antenna(s). 1DIV model units support Single Sector Single BS with Diversity operation mode providing a bandwidth of up to 10 MHz per sector. A dual-slant antenna (internal or external) or two external antennas support second order diversity with MIMO in the downlink and MRC in the uplink.Figure 1-6: Single Sector Single BS with Diversity Operation Mode

Chapter 1 - System Description BreezeMAX ExtremeBreezeMAX Extreme 14 System Manual1.3.3.2 Single Sector, No Diversity ConfigurationsSingle Sector No Diversity (1SIS model) units include a BS connected to an internal radio with either an RF connection to an external antenna or (in 4.9/5.4 GHz units only) an integral dual slant antenna using the same slant as the PRO 5100 series CPEs. 1SIS model units support the Single Sector Single BS without Diversity operation mode providing a bandwidth of up to 10 MHz per sector.1.3.4 Power SupplyThe BTS is powered from a 48V DC power source. Alvarion offers a range of indoor AC/DC power supplies to support the different power requirements of the various BTS units:A high power AC/DC power supply that may be used to provide power to all BTS types.A low power PoE AC/DC power supply that can supply DC power over the Ethernet connection to 5 GHz BTS units.1.3.5 Radio AntennasAccording to radio band and configuration, BTS units are supplied with either integral antenna(s) or with connection(s) to external antenna(s). Alvarion offers a range of external antennas to support various deployment and coverage needs.Figure 1-7: Single Sector Single BS without Diversity Operation Mode

Chapter 1 - System Description BreezeMAX ExtremeBreezeMAX Extreme 15 System Manual1.3.6 GPS AntennaGPS is used to synchronize the air link frames of Intra-site and Inter-site located sectors to ensure that in all sectors the air frame will start at the same time, and that all sectors will switch from transmit (downlink) to receive (uplink) at the same time. This synchronization is necessary to prevent Intra-site and Inter-site sectors interference and saturation (assuming that all neighboring sectors are operating with the same DL/UL ratio). The BTS includes an internal GPS receiver with hold over mechanism in case GPS is lost or satellites synchronization was not reached. The GPS clock required is 1PPS with accuracy of 10-11 and maximum jitter of 100ns. These GPS clock requirements can be reached by a GPS receiver when it receives at least 4 satellites. After initial synchronization, at least two satellites should be received to maintain sufficient synchronization.Alvarion offers two types of GPS antennas:Active high-gain antenna that can be installed at a distance of up to 25m from the BTS.Basic miniature antennas that can be installed at a distance of up to 3m from the BTS.

Chapter 1 - System Description SpecificationsBreezeMAX Extreme 16 System Manual1.4 Specifications1.4.1 General Modem & Radio1.4.2 3.5 GHz BTSTable 1-1: General Modem & Radio SpecificationsItem DescriptionOperation Mode TDDModulation OFDM modulation, 1024/512 FFT points; QPSK, QAM16, QAM64Access Method OFDMAFEC Convolutional Turbo Coding: 1/2, 2/3, 3/4, 5/6Table 1-2: 3.5 GHz BTS SpecificationsItem DescriptionFrequency 3400-3600 MHzSupported Bandwidth 5 MHz, 10MHzCentral Frequency Resolution 125 KHz Maximum Tx Power 30 dBmTx Power Control Range 10 dB, in 1 dB stepsTx Power Accuracy +/- 1 dBMax. Input Power (at antenna port) -40 dBm before saturation-10 dBm before damageDimensions (H x W x D) 510 x 280 x 147 mmWeight (kg) 10.7Power Source 40 to 60 VDCPower Consumption Single Radio: 59W maximumTwo Radios: 92W maximum

Chapter 1 - System Description SpecificationsBreezeMAX Extreme 17 System Manual1.4.3 5 GHz BTSThe following table shows the transmitter power level at the antenna connector as a function of antenna type and channel bandwidth in 5.4 GHz BTS. Table 1-3: 5 GHz BTS SpecificationsItem DescriptionFrequency 4.9 GHz Band: 4900-5470 MHz5.4 GHz Band: 5470-5950 MHzActual supported frequencies depend on relevant regulations according to the selected Frequency Band.Supported Bandwidth 5 MHz, 10MHzSupported bandwidths depend on relevant regulations according to the selected Frequency Band.Central Frequency Resolution 2.5 MHz @ 5 MHz bandwidth5 MHz @ 10 MHz bandwidthTx Power Range 0-21 dBm, in 1 dBm stepsActual maximum Tx Power depend on relevant regulations according to the selected Frequency Band and antenna(s) gain.Tx Power Accuracy +/- 1 dBMax. Input Power (at antenna port)-40 dBm before saturation-10 dBm before damageDimensions (H x W x D) 510 x 280 x 147mmWeight (kg) 10.7Power Source 40 to 60 VDCPower Consumpltion Single Radio: 41.5W maximumTwo Radios: 57W maximumTable 1-4: Transmitter Power Level per Antenna Gain and Channel BandwidthAntenna type RF chains/CH BW Transmitted power (dbm)Sector, 17dbi 1RF chain /5MHz 7.7Sector, 17dbi 2RF chains/5MHz 4.7Sector, 17dbi 1RF chain /10MHz 10.7Sector, 17dbi 2RF chains/10MHz 7.7

Chapter 1 - System Description SpecificationsBreezeMAX Extreme 18 System ManualThe following table shows the transmitter power level at the antenna connector as a function of antenna type in 5.8 GHz BTS.Internal, 15.5dbi 1RF chain /5MHz 8.5Internal, 15.5dbi 2RF chains/5MHz 8.5Internal, 15.5dbi 1RF chain /10MHz 11.5Internal, 15.5dbi 2RF chains/10MHz 11.5Omni, 8dbi 1RF chain /5MHz 16.7Omni, 8dbi 2RF chains/5MHz 13.7Omni, 8dbi 1RF chain /10MHz 19.7Omni, 8dbi 2RF chains/10MHz 16.7Table 1-5: Transmitter Power Level per Antenna GainAntenna type and gain Transmitter power (dbm)Internal , dual slant 15.5dbi 20.5Omni, 9.5dbi 24.2Sectorial 17dbi 19.7Table 1-4: Transmitter Power Level per Antenna Gain and Channel BandwidthAntenna type RF chains/CH BW Transmitted power (dbm)

Chapter 1 - System Description SpecificationsBreezeMAX Extreme 19 System Manual1.4.4 Sensitivity1.4.5 3.x GHz Antennas1.4.5.1 Integral 3.x GHz Antennas1.4.5.2 External 3.x GHz Antennas (Optional)Table 1-6: Sensitivity, AWGN @ PER=1%, UL Fade Margin=2dBModulation & Coding Sensitivity (dBm), 5 MHz Bandwidth Sensitivity (dBm), 10 MHz BandwidthNo Diversity With Diversity No Diversity With DiversityQPSK 1/2 -95 -98 -92 -95QPSK 3/4 -92 -95 -89 -9216QAM 1/2 -89 -92 -86 -8916QAM 3/4 -85 -88 -82 -8564QAM1/2 -83 -86 -80 -8364QAM2/3 -80 -83 -77 -8064QAM3/4 -79 -82 -76 -7964QAM5/6 -76 -79 -73 -76Table 1-7: Integral 3.x GHz Antennas SpecificationsItem Description90° Dual Slant 2 x 13 dBi in the 3.3-3.8 GHz band, 90°AZ x 13°EL sector antenna, dual slant +/- 45° polarization, RoHS compliant.Table 1-8: External 3.x GHz Antennas SpecificationsItem DescriptionBS ANT 60V/3.3-3.8 16.5 dBi minimum in the 3.3-3.8 GHz band, 60° AZ x 7° EL, vertical polarization, compliant with ESTI EN 302 326-3 V1.2.1 (2007-01). 76.6 x 15 x 8.7 cm, 2.2 kg. Mounting kit: 2" to 4.5" pole.BS ANT 90V/3.3-3.8 14.5 dBi minimum in the 3.3-3.8 GHz band, 90° AZ x 7° EL, vertical polarization, compliant with ESTI EN 302 326-3 V1.2.1 (2007-01). 76.6 x 15 x 8.6 cm, 2.2 kg. Mounting kit: 2" to 4.5" pole.

Chapter 1 - System Description SpecificationsBreezeMAX Extreme 20 System Manual1.4.6 5 GHz Antennas1.4.6.1 Integral 5 GHz Antennas1.4.6.2 External 5 GHz Antennas (Optional)BS ANT 65/3.5 DP 2 x 16.5 dBi minimum in the 3.3-3.8 GHz band, 65°AZ x 7°EL sector antenna, dual slant +/- 45° polarization, compliance with ETSI EN 302 326-3 V1.2.1 (2007-01) and RoHS. 85.1 x 16 x 6.1 cm, 2 kg. Mounting kit: 4 to 12 cm pole.BS ANT 90/3.5 DP 2 x 15.5 dBi minimum in the 3.3-3.8 GHz band, 90°AZ x 7°EL sector antenna, dual slant +/- 45° polarization, compliance with ETSI EN 302 326-3 V1.2.1 (2007-01) and RoHS.85.1 x 16 x 6.1 cm, 2 kg. Mounting kit: 4 to 12 cm pole.Omni ANT 3.4-3.6 10 dBi typical in the 3.4-3.6 GHz band, 360° AZ x 9° EL, vertical polarization.67.5 tubular, 8 diameter, 0.29 kg, Mounting bracket: up to 50 mm pole.Table 1-9: Integral 5 GHz Antennas SpecificationsItem Description90° Dual Slant 2 x 15 dBi in the 4.9-5.9 GHz band, 90°AZ x 8°EL sector antenna, dual slant +/- 45° polarization, RoHS compliant.* In the 90V model only a single slant is usedTable 1-10: 5 GHz Antennas SpecificationsItem Description5.15-5.875GHz BS 60° 16dBi. 16 dBi typical in the 5.150-5.875 GHz band (15.5 dBi in the 4.900-5.150 GHz band). 60° AZ x 10° EL sector antenna, vertical polarization, compliant with ETSI EN 302 326-3 V1.2.1 (2007-01).43.6 x 25 x 1.0 cm, 2.2kg, 2"-3.5" pole mountable.5.15-5.875GHz BS 90° 17dBi. 17 dBi typical in the 5.150-5.875 GHz band (16.5 dBi in the 4.900-5.150 GHz band). 90° AZ x 6° EL sector antenna, vertical polarization, compliant with ETSI EN 302 326-3 V1.2.1 (2007-01).55 x 25 x 1.1 cm, 1.5kg, 2"-3.5" pole mountable.5.15-5.875GHz BS 120° 15dBi 15 dBi typical in the 5.150-5.875 GHz band (14.5 dBi in the 4.900-5.150 GHz band). 120° AZ x 6° EL sector antenna, vertical polarization, compliant with ETSI EN 302 326-3 V1.2.1 (2007-01).553 x 26 x 1.1 cm, 2.5kg, 2"-3.5" pole mountable.Table 1-8: External 3.x GHz Antennas SpecificationsItem Description

Chapter 1 - System Description SpecificationsBreezeMAX Extreme 21 System Manual1.4.7 Power Supply1.4.7.1 High-Power AC/DC Power Supply1.4.7.2 PoE AC/DC Power Supply for 5 GHz BTSANT-BST-15-120 15 dBi typical in the 4.900-5.100 GHz band. 120° AZ x 6.5° EL sector antenna, vertical polarization, compliant with ETSI EN 302 326-3 V1.2.1 (2007-01). 55 x 25 x 1.7 cm, 1.5 kg, 2"-4" pole mountable.ANT,BS,4.9-5.875G,V9.5dBi, OMNI 9.5 dBi typical in the 4.900-5.875 GHz band. 360° AZ x 7° EL, vertical polarization. 46.4 cm high, 2.8 cm base diameter, 0.7 kg, 1.5"-3" pole mountable.Table 1-11: High-Power AC/DC Power Supply SpecificationsItem DescriptionInput Volage 90 ~ 132 / 180 ~ 264 VAC (selection by switch), 47 ~ 63 Hz.Input AC Current (typical) 8A/115 VAC, 3.2A/230VACEfficiency 89% typicalOutput Voltage 54 VDCOutput Current Up to 10ADimensions (H x W x D) 110 x 303 x 240 mmWeight 4.75 kgTable 1-12: PoE AC/DC Power Supply for 5 GHz BTS SpecificationsItem DescriptionInput Volage 90 ~ 264 VAC, 47 ~ 63 HzInput AC Current 1.8A max. at 90 VAC Efficiency 83% minimumOutput Voltage 55 VDCOutput Current Up to 1.27ADimensions (H x W x D) 33.5 x 63.5 x 160 mmWeight 375 gTable 1-10: 5 GHz Antennas SpecificationsItem Description

Chapter 1 - System Description SpecificationsBreezeMAX Extreme 22 System Manual1.4.8 GPS Antennas1.4.9 Data Communication (Ethernet Port)1.4.10 Configuration and ManagementTable 1-13: GPS Antennas SpecificationsItem DescriptionHigh Gain 66.2 mm high, 77.5 mm diameter, 170 g, 1”-14 thread, ROHS compliant, IP 67.35 dB gain, power consumption 30 mA max. @ 3.3 VDC. Cable length (RG-6) up to 25m.Operating Temperature: -40°C to +85°C.Basic 21 mm high, 60 mm diameter, 50 g, ¾” thru-hole or bracket mount, ROHS compliant, IP 67.28 dB gain, power consumption 15 mA max. @ 3.3 VDC. Cable length (RG-6) up to 3m. Operating Temperature: -40°C to +85°C.Table 1-14: Data Communication (Ethernet Port)Item DescriptionStandards Compliance IEEE 802.3 CSMA/CD, IEEE 803.3uMaximum Packet Size (including 4 CRC bytes and 4 VLAN tag bytes)1550 bytesSpeed 10/100 Mbps, Half/Full Duplex with Auto NegotiationTable 1-15: Configuration and ManagementItem DescriptionManagement via Data Port SNMP Tel ne tSNMP Agents SNMP ver 1 clientMIB II (RFC 1213), RFC2233, RFC2618, RFC2620, Private MIBsSoftware upgrade Using TFTP Configuration upload/download Using TFTP

Chapter 1 - System Description SpecificationsBreezeMAX Extreme 23 System Manual1.4.11 Environmental1.4.12 BTS Standards Compliance, GeneralTable 1-16: Environmental SpecificationsType Unit DetailsOperating temperature BTS -40°C to +60°CAC/DC Power Supplyt -20°C to +70°COperating humidity BTS 5%-95% non condensingAC/DC Power Supply 20%-90% non condensingRain and Dust Ingress Protection BTS IP 67Table 1-17: BTS Standards Compliance, GeneralType StandardEMC ETSI EN 301 489-1/4ETSI EN55022 Class BFCC Part 15 Class BSafety EN 60950-1/22UL 60 950-1/22AS/NZS 3260 (Australia / New Zealand)Environmental ETSI 300 019-2-4 V2.2.2 Class T4.1E:3.5 GHz Radio ETSI EN 302 326ETSI EN 302 623ETSI EN 301 390CEPT/ERC Recommendation 74-01E

Chapter 1 - System Description SpecificationsBreezeMAX Extreme 24 System Manual5 GHz Radio ETSI EN 302 326ETSI EN 301 390ETSI EN 302 502 v1.2.1ETSI EN 301 893 v1.5.1FCC Part 15.247CC Part 15.407FCC-06-96A1UK VNS 2107 UK IR200CEPT/ERC Recommendation 74-01ELightning Protection ITU-T - K.20EN-61000-4-5Ethernet IEEE 802.3 CSMA/CDIEEE 803.3uPower Supply Interface (DC) ETSI EN 300 132-2WiMAX IEEE 802.16-2004IEEE-802.16e-2005Table 1-17: BTS Standards Compliance, GeneralType Standard

2ChapterInstallation

Chapter 2 - InstallationBreezeMAX Extreme 26 System ManualIn This Chapter:“BTS Installation” on page 27“GPS Installation” on page 38“Indoor Power Supply Installation” on page 42“Cable Connections” on page 44“External Antennas Connection” on page 49

Chapter 2 - Installation BTS InstallationBreezeMAX Extreme 27 System Manual2.1 BTS InstallationThe BTS can be installed on straight or angled poles (±45° from upward position) and on a flat surface, such as walls. GPS and external antenna should be installed above the BTS. Make sure to allow access to all components and consider the location of power source.All the installations options include a tilt bracket which supports:Rotation: ±45°Tilt: +7.5° to -10°2.1.1 Installation Requirements2.1.1.1 Packing ListBTS (weight: 10.7 Kg.)Mounting kit (for 2''-6'' poles) including the tilt bracket and carriage Sealing Gland Fastening Tool2.1.1.2 Optional ComponentsKit including 4 metal bands for mounting on poles larger than 6”2.1.1.3 Additional Installation RequirementsThe following items are also required to install the BTS:Ethernet cable*. Not applicable for 5 GHz units using PoE power supply option. Available in various lengths.CAUTIONONLY experienced installation professionals who are familiar with local building and safety codes and, wherever applicable, are licensed by the appropriate government regulatory authorities should install outdoor units and antennas.Failure to do so may void the BreezeMAX Extreme product warranty and may expose the end user or Service Provider to legal and financial liabilities. Alvarion and its resellers or distributors are not liable for injury, damage or regulation violations associated with the installation of outdoor units or antennas.

Chapter 2 - Installation BTS InstallationBreezeMAX Extreme 28 System ManualPower Supply:»PoE Power Supply and Data and Power (indoor-outdoor) CAT5 cable* (applicable only for 5 GHz units, available in various lengths), or:»High power AC/DC Power Supply unit and DC power cable* (available in various lengths).Antenna(s)* and RF cable(s)* for connecting the antenna(s) to the BTS. (applicable for units without integral antennas).Grounding cable with an appropriate termination.One of the following GPS options (see “GPS Installation” on page 38):»High-Gain GPS Antenna with mounting kit, 25m cable and two lightning arrestors. or:»Basic GPS Antenna kit including mounting kit, 3m cable and one lightning arrestor.Installation tools and materials. For wall mount installation - four suitable dowels and screws. 2.1.1.4 Pole Mounting KitCarriageTilt bracketTwo Heavy duty metal clamps4 x Threaded rods10 x M8X20 screws18 x M8 flat washersNOTEItems marked with an asterisk (*) are available from Alvarion.

Chapter 2 - Installation BTS InstallationBreezeMAX Extreme 29 System Manual8 x M8 nuts14 x M8 spring washersFor poles larger than 6'' - additional kit containing 4 metal bands2.1.2 Assembling the Tilt Bracket on the BTSThe tilt bracket is attached and fastened to the BTS and then hung on the carriage. After hanging the BTS on the carriage, tilt and rotate the BTS as required before fastening the screws. The Tilt Bracket supports +7.5°/-10° tilting and ±45° vertical plane rotation.1 Place the tilt bracket on the BTS and fasten its screws (see Figure 2-1 and Figure 2-2).NOTEInstall the unit with the bottom panel, including the LEDs, facing downward. Note the direction arrows (UP) on the sides of the BTS.IMPORTANTThe weight of BTS is 10.7 Kg and the weight of the Pole Mounting Kit is approximately 5 kg. Be sure to plan the installation accordingly. It is recommended to use a harness to lift the units.Install the unit using the supplied kit only. To assemble the bracket on the BTS:

Chapter 2 - Installation BTS InstallationBreezeMAX Extreme 30 System ManualFigure 2-1: Assembling the Tilt Bracket on the BTSFigure 2-2: Tilt Bracket Installed on BTSTilt bracketBTSM8X20 screwsCarrying groovesI

Chapter 2 - Installation BTS InstallationBreezeMAX Extreme 31 System Manual2.1.3 Installing a Lightening Arrestor for the High-Gain GPS AntennaIf you use a High-Gain GPS antenna with a cable longer than 3m, a lightening arrestor must be installed near the BTS.2 Install the lightening arrestor (part of the GPS Kit, see “GPS Installation” on page 38) at the designated location at the bottom of the carriage (see Figure 2-3). 3 Connect one end of the 0.5 m cable to the lightening arrestor and the other end to the GPS ANT connector on the BTS.2.1.4 Installing the BTS on a PoleThe BTS can be installed on poles of various sizes, using the supplied carriage (see Figure 2-4). For poles of 2''-6'' in diameter, use the supplied metal clamps. For poles larger than 6'' use metal bands.Figure 2-3: Installing the Lightening Arrestor on the CarriageNOTESome units are supplied with a separate pole-mounting bracket for the lightning arrestor. Instead of attaching the lightening arrestor to the carriage, install this bracket on the pole as close to the BTS as possible, allowing connecting the lightning arrestor to the BTS’s GPS connector.Lightening ArrestorCarriageHole for lightening arrestor

Chapter 2 - Installation BTS InstallationBreezeMAX Extreme 32 System Manual1 Assemble the tilt bracket on the BTS and fasten its four screws (see “Assembling the Tilt Bracket on the BTS” on page 29).2 If you use a High-Gain GPS antenna with a cable longer than 3m, install a lightening arrestor on the carriage as described in “Installing a Lightening Arrestor for the High-Gain GPS Antenna” on page 31.3 Thread the four rods through the carriage.4 Attach the carriage and the clamps to the pole and tighten on both sides using the supplied washers, spring washers and nuts.5 Insert the Tilt Control screws into the middle-side hole of the carriage on both sides.Figure 2-4: BreezeMAX Extreme Pole Mount CarriageTo install the Carriage on a 2''-6'' pole:Holes for pole mounting rods (x4)Holes for wall mounting screws (x4)Groove for metal bandsHoles for fastening screws (x4)Tilt control screws (x2)Holes for lightening arrestor (x4)

Chapter 2 - Installation BTS InstallationBreezeMAX Extreme 33 System ManualFigure 2-5: Assembling BTS Carriage and ClampsFigure 2-6: BTS Carriage and Clamps InstalledCarriageTill control screwClampsRodsNuts, washers and spring washersTilt control screw

Chapter 2 - Installation BTS InstallationBreezeMAX Extreme 34 System Manual1 Assemble the tilt bracket on the BTS and fasten its four screws (see “Assembling the Tilt Bracket on the BTS” on page 29).2 Thread the four metal bands through the grooves on the BTS carriage and fasten them (see Figure 2-7).3 Attach the carriage to the pole and fasten the metal bands (see Figure 2-7).4 Insert the Tilt Control screws into the middle-side hole of the carriage on both sides (Figure 2-7).2.1.5 Mounting the BTS on the CarriageAt this stage, after mounting the BTS on the carriage, use the Tilt bracket to tilt and rotate the BTS as required.1 Hang the BTS with the tilt bracket on the Tilt-control screws of the BTS carriage.2 Attach and fasten all the screws at both sides of the BTS carriage . Do not over tighten.To install the Carriage on a pole larger than 6'':Figure 2-7: Installed Carriage with Metal BandsTo mount the BTS on the carriage:Tilt control screwsMetal bands

Chapter 2 - Installation BTS InstallationBreezeMAX Extreme 35 System ManualFigure 2-8: BTS Mounted on a 2''-6'' Pole (with Clamps)Figure 2-9: BTS Mounted on a Pole Larger than 6'' (with Metal Bands)Tilt Control screw

Chapter 2 - Installation BTS InstallationBreezeMAX Extreme 36 System Manual3 If required, slightly release the tilt bracket screws to enable rotation, and the Tilt Control screws to enable tilting; Adjust the BTS position and tighten the screws.2.1.6 Wall Mount InstallationThe BreezeMAX Extreme BTS can be installed on walls or any flat surface. This requires attaching and fastening the carriage with the BTS to the wall using suitable securing means (not supplied) and then tilting and rotating the BTS as required. The location of the screws should be planned with maximum precision.1 Assemble the tilt bracket on the BTS and fasten its four screws (see “Assembling the Tilt Bracket on the BTS” on page 29).2 If you use a High-Gain GPS antenna with a cable longer than 3m, install a lightening arrestor on the carriage as described in “Installing a Lightening Arrestor for the High-Gain GPS Antenna” on page 31.3 Place the carriage on the wall and mark the exact location of the holes to drill. 4 Drill the holes, and use four metal dowels and screws to affix the carriage to the wall.5 Insert the Tilt Control screws into the middle-side hole of the carriage on both sides (see Figure 2-10).To install the BTS on a wall:Figure 2-10: Mounting the Carriage on the WallCarriageTill control screwHoles for wallmountscrews (to be fastened using dowels

Chapter 2 - Installation BTS InstallationBreezeMAX Extreme 37 System Manual6 Hang the BTS with the tilt bracket on the tilt control screws of the BTS carriage.7 Attach and fasten all the screws at both sides of the carriage (see Figure 2-10). Do not over tighten.8 If required, slightly release the tilt bracket screws to enable rotation, and the Tilt Control screws to enable tilting; Adjust the BTS position and tighten the screws.

Chapter 2 - Installation GPS InstallationBreezeMAX Extreme 38 System Manual2.2 GPS InstallationAlvarion offers two types of GPS antenna (basic and high-gain) that can be installed at a distance of up to 25m (high-gain) or 3m (basic) from the BTS (with the required mounting kit and connecting cable). Refer to “GPS Antennas” on page 23 in the Specifications sections for more information.2.2.1 Installation Requirements The High-gain GPS antenna is installed using a specially designed bracket and a 25m cable. A second lightening arrestor is required with this configuration in addition to the lightening arrestor already assembled on the BTS carriage (see “Installing a Lightening Arrestor for the High-Gain GPS Antenna” on page 31). The Basic GPS antenna is installed using a specially designed bracket and a 3m cable. No lightening arrestor is required with this configuration in addition to the lightening arrestor already assembled on the BTS carriage. 2.2.2 Packing ListGPS Mounting Kit: One of the following options:Basic GPS Antenna»Basic antenna»3m cable»Pole mount bracket»Two metal bands»One Lightning Arrestor with 0.5m cable, including screws, washer, and spring washer (UNC10-32)

Chapter 2 - Installation GPS InstallationBreezeMAX Extreme 39 System ManualHigh gain GPS Antenna»High gain antenna»25m cable»Pole mount bracket »Two metal bands »Carriage mounting bracket»Two Lightning Arrestors with 0.5m cables, including screws, washers, and spring washers (2 x UNC10-32)2.2.3 Installing the GPS1 Place the bracket on a flat surface and thread the GPS antenna through the hole at the top of the bracket. Hand-tighten the fastening nut.2 Assemble the lightening arrestor on the bracket, with the screws facing the bracket. Connect one end of the 0.5 m cable to the lightening arrestor and the other end to the GPS antenna.3 Connect one end of the GPS 3m cable to the lightening arrestor, and the other end to the GPS ANT connector on the BTS.To install the basic GPS antenna:Figure 2-11: Bracket for Basic GPSHole for GPS antennaHoles for metal bands

Chapter 2 - Installation GPS InstallationBreezeMAX Extreme 40 System Manual4 Use the supplied metal bands to assemble the bracket on a pole.5 Fix the cable onto the pole using plastic strips. 1 Place the bracket on a flat surface and thread the GPS antenna through the 3/4" hole of the bracket. Hand-tighten the fastening nut.2 Assemble the lightening arrestor on the bracket, with the screws facing the bracket.3 Connect one end of the 0.5 m cable to the lightening arrestor and the other end to the GPS antenna.4 Use the 25m GPS cable to connect the lightning arrestor on the GPS bracket to the second lightning arrestor installed near the BTS (see “Installing a Lightening Arrestor for the High-Gain GPS Antenna” on page 31). Connect this second lightning arrestor to the GPS ANT connector on the BTS. To install the high-gain GPS antenna:NOTEDo not over-tighten or use a tool for tightening the cables, to avoid stripping the connectors.Figure 2-12: Bracket for High-Gain GPSHole for High-gain GPS antennaLightening arrestor Holes for metal bands

Chapter 2 - Installation GPS InstallationBreezeMAX Extreme 41 System Manual5 Hand-tighten the connector on the interface cable using the locking ring for securing the connection. 6 Use the supplied metal bands to assemble the bracket on a pole.7 Fix the cable onto the pole using a plastic strip.

Chapter 2 - Installation Indoor Power Supply InstallationBreezeMAX Extreme 42 System Manual2.3 Indoor Power Supply InstallationThe BTS is powered from a 48V DC power source. Alvarion offers a range of indoor AC/DC power supplies to support the different power requirements of the various BTS units:A high power AC/DC power supply - to be used with all BTS types.A PoE AC/DC power supply that can supply DC power over the Ethernet connection to 5 GHz BTS units (see “PoE AC/DC Power Supply” on page 43).2.3.1 High Power AC/DC Power Supply UnitFigure 2-13: Indoor High Power AC/DC Power Supply UnitDC Power connectionAC Power connectionGrounding

Chapter 2 - Installation Indoor Power Supply InstallationBreezeMAX Extreme 43 System Manual1 Place the Power Supply on a table/shelf or use 4 screws to mount the unit to the wall.2 For cable connection, refer to “Cable Connection” on page 46.2.3.2 PoE AC/DC Power SupplyA Universal Indoor Unit AC Power Adapter is used to supply DC power over the Ethernet connection to 5 GHz BTS units. This is an AC to DC power transfer device, which can provide a 70W single DC output with constant voltage source.This unit can be wall mounted or placed on the desktop.For cable connection, refer to “Cable Connection” on page 46To install the indoor high power supply unit:Figure 2-14: Low Power PoE AC/DC Power Supply

Chapter 2 - Installation Cable ConnectionsBreezeMAX Extreme 44 System Manual2.4 Cable ConnectionsThe BreezeMAX Extreme is provided with sealing glands on all the cable connectors. The DATA/DC IN/OUT, and GPS IN/OUT cables are to be connected to the BTS by inserting the cable connector through the sealing gland. The DC power cable is supplied with a sealing gland that should replace the existing sealing gland provided with the BTS. A dedicated tool is supplied for fastening the sealing glands (see Figure 2-16).For LED indication refer to “Operation Verification” on page 60.Figure 2-15: BTS with Sealing GlandsFigure 2-16: Sealing Gland Fastening Tool Sealed LED windowGPS Antenna GPS OUTSealingGlandGPS INDATA DC IN/OUT48V power

Chapter 2 - Installation Cable ConnectionsBreezeMAX Extreme 45 System ManualFigure 2-17: BTS Rear View - External Antenna ConnectionsTable 2-1: External ConnectorsConnection Connector Type FunctionalityDATA DC IN/OUT RJ-45 10/100BASE-T connectivity Supports MDI/MDIXPoE In/OutGPS Antenna TNC jack Connection to GPS antenna (via lightning arrestor(s))GPS In RJ-45 GPS signalling from another BTS. Not applicable in current releaseGPS Out RJ-45 GPS signalling to another BTS. Not applicable in current releaseDC source 4-pin Mini Fit High CurrentMolex 39-29-1048DC Power (GND) Grounding screw Connection to ground (earth)ANT (1/2) N-Type jack, 50 Ohm Connection to external antenna(s) (not applicable if integral

Chapter 2 - Installation Cable ConnectionsBreezeMAX Extreme 46 System Manual2.4.1 Cable Connection2.4.1.1 Grounding Cable ConnectionWhen grounding the unit, use the GND (ground) screw on the unit as a grounding point. The Grounding screw (marked ) is located on the rear panel of the unit.1 Connect one end of a grounding cable to the ground terminal and firmly tighten the grounding screw. 2 Connect the opposite end of the grounding cable to a ground connection.2.4.1.2 Data/PoE Cable ConnectionFor all units, use Category 5E Ethernet cables with two shielded RJ-45 connectors from either Alvarion or any of the approved manufacturers, listed in Table 2-2. The provided cables are crimped.Consult with Alvarion's specialists on the suitability of other cables.For 5 GHz units, if you use a PoE indoor power supply (see “Indoor Power Supply Installation” on page 42), the data port cable is used as a power source cable. In this case, use a Power over Ethernet (PoE) cable for connecting PoE to the BreezeMAX Extreme unit.For 5 GHz units using two radios (diversity) the maximum length of the PoE cable should not exceed 70 m.To connect the grounding cable:NOTEThe length of the Data/PoE cable, together with the length of the Ethernet cable should not exceed 100 meters.CAUTIONAs PoE cable conducts power as well, there is a risk of electric shock and energy hazard.

Chapter 2 - Installation Cable ConnectionsBreezeMAX Extreme 47 System Manual 1 Remove the DATA DC IN/OUT sealing gland from the BTS.2 Open the gland and thread the cable through the gland's nut.3 Carefully insert the cable with the already assembled RJ-45 connector through the gland.4 Connect the cable to the DATA connection on the BTS.5 Return the gland. Use the dedicated tool to fasten it.6 Use the dedicated tool to fasten the sealing gland's nut on the gland body.7 Connect the other end of the cable to one of the following: »If you are using PoE (for 5 GHz units only) - to the PoE AC/DC power supply RJ-45 connector (labeled as Radio). Connect the Ethernet port of the PoE PS to the backhauling equipment using a standard Ethernet cable. Connect the PoE PS to the 110/220 VAC mains. Table 2-2: Approved Category 5E Ethernet CablesManufacturer Part NumberSuperior Cables Ltd. www.superior-cables.com612098 HES Cabling Systemswww.hescs.comH5E-00481Tel do rwww.teldor.com8393204101Southbay Holdings Limited11th Fl., 15, Lane 347, Jong Jeng Rd.Shin Juang City, Taipei CountyTaiwan, R.O.C.Attn: Eva LinTel. 886-2-2832 3339Fax. 886-2-2206 0081E-mail: eva@south-bay.com.twTSM2404A0DTo connect the data cable (with an assembled sealing gland)

Chapter 2 - Installation Cable ConnectionsBreezeMAX Extreme 48 System Manual»If you are not using PoE - to the backhauling equipment.2.4.1.3 DC Power Cable Connection (not applicable if using PoE)The power cable is supplied with a specially designed sealing gland that should replace the existing gland provided with the BreezeMAX Extreme BTS.Cables are available either open ended at the Power Supply side or with a crimped D-Type connector.1 Remove the existing gland from the 48V connection on the BTS.2 Attach the DC power cable with the already assembled gland to the 48V connection on the BTS.3 Separate the sealing gland nut from the gland body.4 Use the dedicated tool to fasten the gland to the BTS.5 Use the dedicated tool to fasten the sealing gland's nut on the gland body.6 Connect the other end of the power cable to the high power AC/DC power supply.Use a standard power cable to connect to 48V DC power source. NOTEThe combined lengths of the Ethernet cables should not exceed 100m.To connect the power cable:

Chapter 2 - Installation External Antennas ConnectionBreezeMAX Extreme 49 System Manual2.5 External Antennas ConnectionTwo N-type connectors are used for optional external antenna connection (see Figure 2-17). The connectors should have an impedance 50Ω and should be protected against lightening.1 Connect one end of the coaxial RF cable to the connector (marked ) located on the rear panel of the unit. 2 Connect the other end of the RF cable to the antenna.3 The RF connectors should be properly sealed to protect against rain and moisture.To connect the RF cable (units with external antenna):NOTEThe recommended minimum distance between any two antennas in neighboring sectors is 0.5 meters.The minimum distance between any two antennas in the same sector (space diversity configuration) is 10 lambda (λ), where λ=C/Frequency (Hz). C is the speed of light in centimeters per second which is equal to 29,979,245,800.The minimum distance between any two antenna in the same sector (space diversity configuration) is 1.3 meters.

3ChapterCommissioning

Chapter 3 - CommissioningBreezeMAX Extreme 51 System ManualIn This Chapter:“Configuring Parameters Required for Remote Management” on page 52“Operation Verification” on page 54

Chapter 3 - Commissioning Configuring Parameters Required for Remote ManagementBreezeMAX Extreme 52 System Manual3.1 Configuring Parameters Required for Remote ManagementAfter completing the installation process, as described in the preceding chapter, some parameters must be configured using either Telnet (the Monitor application) or AlvariCRAFT. These parameters are necessary to enable remote management of the BTS.Refer to Chapter 4 for information on how to access the Monitor application and how to use it. Refer to the AlvariCRAFT User Manual for information on how to use it.The basic parameters are listed in Table 3-1. Refer to Chapter 4 for detailed information on the applicable parameters.NOTEAlvariCRAFT can be used only if the Authorized Managers list in the BTS is either empty (default) or includes the IP address of the AlvariCRAFT station.Table 3-1: Basic BTS ParametersManagement Option ParametersBTS-Connectivity IP addressSubnet MaskDefault GatewayVLAN IDVLAN PriorityAuthorized Managers (per manager)IP AddressRead CommunityWrite CommunityTraps Distribution Enabled

Chapter 3 - Commissioning Configuring Parameters Required for Remote ManagementBreezeMAX Extreme 53 System ManualAfter the basic parameters have been configured, the BTS can be managed remotely using either Telnet or SNMP-based management.NOTEIf no Authorized Manager is defined in the device, it can be managed using SNMP by any station. If at least one Authorized Manager is defined, the device can be managed only by a station whose parameters match a defined Authorized Manager.

Chapter 3 - Commissioning Operation VerificationBreezeMAX Extreme 54 System Manual3.2 Operation VerificationTo verify the correct operation of the BTS (including the GPS), examine the LED indicators located on the bottom panel of the unit. The following tables list the provided LEDs and their associated indications.Table 3-2: BTS LEDsName Description FunctionalityPWR Power indication Off - Power failureGreen - Power to ODU is OK, internal 3.3 VDC power supply is OK.ALR IDU-ODU communication and synthesizer status indicationOff -Built-in-test passed successfully.Red - Critical failure.ETH Ethernet link status Off - No Ethernet connectionGreen - Lights when the backhaul Ethernet is connected and blinks 500ms on and 500ms off when data traffic appears on the Ethernet link.WLNK Wireless link status Off - No wireless link (no MS is registered)Green - Blinking when the wireless link is working (transmitting), indicating that there is at least one registered MS being served by the unit.GPS GPS synchronization status Off - GPS is not synchronized (see below) or not installed. Green - On once the GPS is reporting on reception of at least 4 satellites (initial synchronization).Blinking Green - (0.5 Sec on, 0.5 Sec off) the number of received satellites decreased from 4 (or more) to 3 or 2 satellites.

Chapter 3 - Commissioning Operation VerificationBreezeMAX Extreme 55 System Manual* All LEDs are turned on upon power up and turn off after successful completion of the built-in-test. 1PPS 1PPS clock status Master UnitOff - GPS is not installed.Green - 1PPS clock is supplied by GPS.Slave Unit:Off - External 1PPS is not supplied.Blinking Green - blinking at the 1PPS rate when external 1PPS clock is supplied.Table 3-2: BTS LEDsName Description Functionality

4ChapterOperation and Administration

Chapter 4 - Operation and AdministrationBreezeMAX Extreme 57 System ManualIn This Chapter:“BreezeMAX Extreme System Management” on page 58“The Monitor Program” on page 59“IP Addresses Configuration” on page 62“The Main Menu” on page 63“BTS Menu” on page 64“ASN-GW Menu” on page 95“Sector Menu” on page 121“BS Menu” on page 133“Radio Channel Menu” on page 153“Antenna Menu” on page 155“GPS Menu” on page 158“MS Menu” on page 165“Parameters Summary” on page 170

Chapter 4 - Operation and Administration BreezeMAX Extreme System ManagementBreezeMAX Extreme 58 System Manual4.1 BreezeMAX Extreme System Management BreezeMAX Extreme can be managed using any of the following options:SNMP based management using AlvariSTAR (or another network management system customized to support management of BreezeMAX Extreme).Using Telnet to access the embedded Monitor application via the Ethernet port.This chapter describes how to manage the system using the Monitor application. For information on managing the system using AlvariSTAR refer to the Applicable AlvariSTAR documentation.NOTEIt is not possible to manage the BreezeMAX Extreme Base Transceiver Station via the wireless link (from the MS’s side).

Chapter 4 - Operation and Administration The Monitor ProgramBreezeMAX Extreme 59 System Manual4.2 The Monitor Program4.2.1 Accessing the Monitor Program1The PC used for accessing the Monitor program should be configured according to the BTS Management Connectivity parameters (see “Connectivity” on page 70).2Run the Telnet program connecting to the IP address of the connected port. 3Select the access level according to your access rights.4The Enter the password message is displayed. Enter the password and press the Enter key to get to the Main menu. The default passwords are:4.2.2 Using the Monitor ProgramThis section describes the Monitor program structure and navigation rules.To access the Monitor program using Telnet:Table 4-1: Default PasswordsAccess Level Default PasswordAdministrator adminInstaller installerMonitor monitorNOTEFollowing three unsuccessful login attempts (using incorrect passwords), access to the monitor program will be blocked for 5 minutes.If you forgot the Installer or User password, the Administrator can login (with the Administrator password) and define a new password for Installer and/or User access level.If you forgot the Administrator password, type "help" to receive a challenge string consisting of 24 characters. Contact Alvarion's Customer Service and provide the challenge string (after user identification) to receive a temporary password. You can use this password only once to enter the program. The password must be changed during the session to a different "permanent" password. The system administrator should be notified of this new password. Five consecutive errors in entering the temporary password will invalidate it. In this case, repeat this procedure to receive a new challenge string for a new temporary password.

Chapter 4 - Operation and Administration The Monitor ProgramBreezeMAX Extreme 60 System ManualThere are three access levels to the Monitor program. The available actions depend on the access level (password) used for accessing the program:»Administrator: Read/Write permissions for all parameters. The default password is admin.»Installer: Read/Write permissions for all options excluding the Change Password option. The default password is installer.»Monitor: Read-only permissions for all parameters. The default password is monitor.Each menu or submenu specifies the unit type (BreezeMAX Extreme/BTS), the IP address of the Data port, the running SW version and a description of the menu.Each menu or submenu displays a list of numbered options. To access an option, enter the number of the required option at the > prompt.At any point in the program, you can use the Esc key to return to the previous menu (one level up) without applying any change.The first selectable item in most menus is the Show option, enabling to view the current configuration of the applicable parameters. For some menus some additional status information is displayed.For certain parameters, an updated value is applied only after reset or after entering a specific command. For these parameters, both Configured and Current values are displayed in relevant Show menus.The Update/Add options will display all applicable parameters line by line, allowing to conveniently edit all of them. The availability and/or value range of certain parameters may change according to the value selected for a previous parameter belonging to the same group. The current value is displayed for each parameter. To keep the current value - press Enter. To change it - enter a new value and press Enter. The new/modified configuration will take effect only after completing the configuration process for the all relevant parameters.Press the Tab key for context sensitive help text (where applicable).If an erroneous value was entered - the reason of the error or help text will be displayed, and the parameter entry text will be displayed again.

Chapter 4 - Operation and Administration The Monitor ProgramBreezeMAX Extreme 61 System ManualMany menus include a Select By option, enabling to get a sub-menu for a selected entity according to the selection criteria.If the Monitor program is not used for a time defined by the Monitor Inactivity Time-out (see “Monitor Inactivity Timeout” on page 87), the session will be terminated automatically.Select the Exit option in the Main menu to exit the program and terminate the session.

Chapter 4 - Operation and Administration IP Addresses ConfigurationBreezeMAX Extreme 62 System Manual4.3 IP Addresses Configuration4.3.1 IP Address Configuration Restrictions1The following IP addresses should not be used and will be rejected:0.0.0.0224.0.0.0 - 255.255.255.255 (Multicasts, RFC 3171 D, RFC 1700 E)2Note that the following IP addresses are reserved for specific applications:10.0.0.0 - 10.255.255.255 (Private IP addresses, RFC 1918 A)127.0.0.0 - 127.255.255.255 (Localhost Loopback Address, RFC 1700 A)169.254.0.0 - 169.254.255.255 (Zeroconf / APIPA, RFC 3330 B)172.16.0.0 - 172.31.255.255 (Private IP addresses, RFC 1918 B)192.0.2.0 - 192.0.2.255 (Documentation and Examples, RFC 3330 C)192.88.99.0 - 192.88.99.255 (IPv6 to IPv4 relay Anycast, RFC 3068 C)192.168.0.0 - 192.168.255.255 (Private IP addresses, RFC 1918 C)198.18.0.0 - 198.19.255.255 (Network Device Benchmark, RFC 2544 C)4.3.2 IP SubnetsIn a binary representation (32 bits) a Subnet Mask string must comprise a series of contiguous binary '1's starting from the MSB, followed by a series of contiguous binary '0's.Subnet Masks 0.0.0.0 (all zeros, meaning “nothing”) and 255.255.255.255 (all ones, meaning “this address only”) are illegal and will be rejected.The different subnets that can be configured for the BTS must be unique (different from each other).

Chapter 4 - Operation and Administration The Main MenuBreezeMAX Extreme 63 System Manual4.4 The Main MenuThe Main menu of the Monitor program includes the following options:1 - BTS (see “BTS Menu” on page 64)2 - ASN-GW (see “ASN-GW Menu” on page 95)3 - Sector (see “Sector Menu” on page 121)4 - BS (see “BS Menu” on page 133)5 - Radio Channel (see “Radio Channel Menu” on page 153)6 - Antenna (see “Antenna Menu” on page 155)7 - GPS (see “GPS Menu” on page 158)8 - MS (see “MS Menu” on page 165)X - Exit (select to exit the Monitor program and terminate the Telnet session)

Chapter 4 - Operation and Administration BTS MenuBreezeMAX Extreme 64 System Manual4.5 BTS MenuThe BTS menu includes the following options:Show SummaryShow PropertiesConfigurationUnit ControlFault ManagementPerformance Counters4.5.1 Show SummarySelect this option to view the current and (where applicable) configured values of all configurable BTS parameters and options:General:BTS NumberBTS NameBTS LocationBTS ContactBTS Working Mode:Current BTS Working ModeConfigured BTS Working ModeManagement Connectivity:Current IP AddressConfigured IP Address

Chapter 4 - Operation and Administration BTS MenuBreezeMAX Extreme 65 System ManualCurrent Subnet maskConfigured Subnet maskCurrent Default GatewayConfigured Default GatewayCurrent VLAN IDConfigured VLAN IDCurrent VLAN PriorityConfigured VLAN PriorityEthernet InterfaceSpeed and Duplex After Negotiation (Mbps)Authorized Managers (for each defined manager):Authorized Managers IndexManager IP AddressRead CommunityWrite CommunityTrap Distribution EnabledGeneral Radio:Current Operator IDConfigured Operator IDOperator NameCurrent Service Zone IDConfigured Service Zone ID

Chapter 4 - Operation and Administration BTS MenuBreezeMAX Extreme 66 System ManualService Zone NameUnit Operation Mode:Current Operation ModeConfigured Operation ModeATPC Mode:ATPC Mode: Open Loop. It is assumed that Open Loop Transmit Power Control is used by the MSs, meaning that each MS calculates the link loss considering the BS Tx power and preamble RSSI and determines its Tx power taking into account the estimated link loss, the number of sub-channels used and the SNR required for the relevant rate.UL/DL Ratio:Current UL / DL RatioConfigured UL / DL RatioDFS:Current DFS TypeConfigured DFS TypeCurrent Frequencies Management LevelConfigured Frequencies Management Level4.5.2 Show PropertiesSelect this option to view the general hardware and software properties of the device:Product Type Operational SW File NameOperational SW Version

Chapter 4 - Operation and Administration BTS MenuBreezeMAX Extreme 67 System ManualShadow SW File NameShadow SW VersionRunning From (Operational or Shadow)Operational Boot SW VersionFrequency File NameFrequency File VersionDigital Board Assembly VersionDigital Board HW VersionRadio 1 HW versionRadio 2 HW versionRadio 1 HPA VersionRadio 2 HPA VersionProduct HW Type: A string defining the HW configuration of the device.FPGA VersionSerial NumberBTS MAC AddressCumulative Power On Time (minutes): The cumulative power-on time of the device since first power-up.Cumulative Life Time (minutes): The cumulative life time of the device since first power-up.Measured Temperature (degrees Celsius)Supported Frequency Band Name

Chapter 4 - Operation and Administration BTS MenuBreezeMAX Extreme 68 System Manual4.5.3 ConfigurationThe Configuration menu includes the following options:General ParametersBTS Working ModeConnectivityAuthorized ManagersRadio4.5.3.1 General ParametersThe BTS General Parameters submenu enables viewing the current values and updating the general BTS parameters. The General Parameters include the following:BTS NumberBTS NameBTS LocationBTS Contact4.5.3.1.1 BTS NumberA BTS identifier for management purposes. Should be unique in the managed network.The range is from 1 to 999999.The default is 0. A different number (unique in the managed network) must be configured.4.5.3.1.2 BTS NameAn optional descriptive parameter. A string of up to 32 printable characters.The default is null (an empty string).4.5.3.1.3 BTS LocationAn optional descriptive parameter. A string of up to 64 printable characters.

Chapter 4 - Operation and Administration BTS MenuBreezeMAX Extreme 69 System ManualThe default is null (an empty string).4.5.3.1.4 BTS ContactAn optional descriptive parameter. A string of up to 64 printable characters.The default is null (an empty string).4.5.3.2 BTS Working ModeThe BTS Working Mode defines the network ASN-GW architecture and the method of MS authentication and service provisioning for embedded ASN-GW.The available options are:Embedded Distributed ASN-GW Authenticated: The ASN-GW functionality resides in the BTS (distributed architecture). MS authentication and services provisioning are managed by a AAA server: MSs (see “MS Menu” on page 165) cannot be added or deleted, and MS Services (see “MSs Services” on page 106) are not configurable locally (read-only).Embedded Distributed ASN-GW Not Authenticated: The ASN-GW functionality resides in the BTS (distributed architecture). MS authentication and services provisioning are managed by the ASN-GW using local configuration. The AAA menu (see “AAA” on page 95) is not applicable.External ASN-GW: The ASN-GW is a separate entity (centralized architecture) that communicates with the BTS over R6 interface. MS authentication and services provisioning are managed by a AAA server. MSs (see “MS Menu” on page 165) cannot be added or deleted. All Services configuration (see “Services Menu” on page 105) are managed by the external ASN-GW and are not available to the user. The AAA menu (see “AAA” on page 95) is not applicable.When changing the BTS Working Mode from Embedded Distributed ASN-GW Not Authenticated to another mode where provisioning is managed by a AAA server, and vice versa, MSs and MS-Services tables records are erased and all connections are deleted.When changing the BTS Working Mode from any Embedded Distributed ASN-GW mode to External ASN-GW mode all Services tables (see “Services Menu” on page 105) and AAA servers (see “AAA” on page 95) are erased.The default BTS Working Mode is Embedded Distributed ASN-GW Authenticated.

Chapter 4 - Operation and Administration BTS MenuBreezeMAX Extreme 70 System Manual4.5.3.3 ConnectivityThe Connectivity parameters enable viewing the current and configured values and updating the parameters of the management interface. The Connectivity parameters include the following:IP AddressSubnet maskDefault GatewayVLAN IDVLAN Priority4.5.3.3.1 IP AddressThe IP address of the Management interface.The default is 10.0.0.1. Refer to the limitations described in “IP Addresses Configuration” on page 62.4.5.3.3.2 Subnet maskThe Subnet Mask of the Management interface.The default is 255.255.255.0.Refer to the limitations described in “IP Addresses Configuration” on page 62.4.5.3.3.3 Default GatewayThe Gateway IP address of the Management interface.The default is 0.0.0.0 (meaning no default gateway). The Default Gateway must be in the subnet of the IP Address. Refer to the limitations described in “IP Addresses Configuration” on page 62.4.5.3.3.4 VLAN IDThe VLAN ID to be used with management messages.Available values are from 1 to 4094, or 4096 for No VLAN (untagged).The default is 4096 (No VLAN).

Chapter 4 - Operation and Administration BTS MenuBreezeMAX Extreme 71 System Manual4.5.3.3.5 VLAN PriorityThe Management VLAN Priority value. Applicable only if VLAN ID is other than 4096 (No VLAN).Available values are from 0 to 7. The default is No VLAN Priority.4.5.3.4 Authorized ManagersThe Authorized Managers submenu enables defining the properties of management stations that are allowed to manage the BTS using SNMP.The Authorized Manager submenu includes the following options:Show SummarySelectAdd4.5.3.4.1 Show SummarySelect this option to view the details of all currently defined authorized managers.4.5.3.4.2 SelectThis option enables selecting an existing authorized manager for viewing or updating its properties or for deleting it from the database. The selection is based on the authorized manager's IP address. The Selected Manager submenu includes the following options:Show (for viewing the details of the selected Manager).Update (for updating the properties of the selected Manager, except to its IP Address. Refer to the following Add section for details on the configurable parameters.)Delete (for deleting the selected Manager from the database).NOTEIf no Authorized Manager is defined in the device, it can be managed using SNMP by any station, with the default Read (public) and Write (private) Communities. If at least one Authorized Manager is defined, the device can be managed only by a station whose parameters match a defined Authorized Manager.

Chapter 4 - Operation and Administration BTS MenuBreezeMAX Extreme 72 System Manual4.5.3.4.3 AddSelect this option to add a new authorized manager. Up to 5 Authorized Managers can be defined. The following parameters can be configured:Manager IP AddressRead CommunityWrite CommunityTraps Distribution Enabled4.5.3.4.3.1 Manager IP AddressThe IP address of the Authorized Manager. Refer to the limitations described in “IP Addresses Configuration” on page 62.The IP Address of an existing Manager cannot be updated (to change it you must first delete the Manager).4.5.3.4.3.2 Read CommunityThe SNMP Read Community to be used by the Authorized Manager. A null Read Community means that the read (get) operation can only be performed using the Write Community.Valid Community strings: 1 to 32 printable characters, case sensitive.The default is public.4.5.3.4.3.3 Write CommunityThe SNMP Write Community to be used by the Authorized Manager. A null Write Community means that the Authorized Manager has Read only access rights.Valid Community strings: 1 to 32 printable characters, case sensitive.The default is private.4.5.3.4.3.4 Traps Distribution EnabledThe Traps Distribution Enabled parameters whether to enable or disable sending of traps to the Authorized Manager.The default is Enable.4.5.3.5 RadioThe Radio submenu includes two options:

Chapter 4 - Operation and Administration BTS MenuBreezeMAX Extreme 73 System ManualShow: Enables viewing the current values of the Radio parameters. For parameters that are applied only after reset, the configured values are also displayed:»General Radio ◊Current Operator ID◊Configured Operator ID◊Operator Name◊Current Service Zone ID◊Configured Service Zone ID◊Service Zone Name»Unit Operation Mode◊Current Operation Mode◊Configured Operation Mode»ATPC Mode◊ATPC Mode: Open Loop. It is assumed that Open Loop Transmit Power Control is used by the MSs, meaning that each MS calculates the link loss considering the BS Tx power and preamble RSSI and determines

Chapter 4 - Operation and Administration BTS MenuBreezeMAX Extreme 74 System Manualits Tx power taking into account the estimated link loss, the number of sub-channels used and the SNR required for the relevant rate.»UL / DL Ratio◊Current UL / DL Ratio◊Configured UL / DL Ratio»Band Name◊Current Band Name◊Configured Band Name»DFS (if applicable)◊DFS Type: Read-only, according to the current Band Name. The options are ETSI, FCC, Normal ETSI, Normal FCC.◊Current Frequencies Management Level◊Configured Frequencies Management LevelUpdate: Enables updating the configured values of Radio parameters. The configurable Radio Parameters include the following:Operator IDOperator NameService Zone IDService Zone NameOperation ModeDL / UL RatioBand NameDFS

Chapter 4 - Operation and Administration BTS MenuBreezeMAX Extreme 75 System Manual4.5.3.5.1 Operator IDThe Operator ID is a unique identifier of the radio network. The same Operator ID must be used by all devices belonging to the same wireless access network.The Operator ID is presented as x.y.z, where x, y, z are in the range 0 to 255.The default Operator ID is 0.0.0. The BTS will not start transmitting until a different Operator ID is defined.4.5.3.5.2 Operator NameAn optional descriptive parameter. A string of up to 32 printable characters.The default is null (an empty string).4.5.3.5.3 Service Zone IDThe Service Zone ID form a part of the BS ID (see BS ID in Section 4.8.1). Each Service Zone may include up to a total of 32 cells, with a maximum of 18 cells with 4 sectors per cell.The value range is from 0 to 2047.The default value 0. The BTS will not start transmitting until a different Service Zone ID is defined.4.5.3.5.4 Service Zone NameAn optional descriptive parameter. A string of up to 32 printable characters.The default is null (an empty string).4.5.3.5.5 Operation ModeThe following operation modes are supported in current release:Single Sector Single BS no Diversity:

Chapter 4 - Operation and Administration BTS MenuBreezeMAX Extreme 76 System ManualSingle Sector Single BS with Diversity:The available operation modes depend on the supplied configuration and installed license options.NOTEPRO 1000 and Si 1000 CPEs can operate only with MIMO A diversity. To support these CPEs by units with a single radio, it is possible to set the Operation Mode of such a unit to Single Sector Single BS with Diversity, although actual operation is with a single radio, single antenna and a single Rx/Tx radio channel.

Chapter 4 - Operation and Administration BTS MenuBreezeMAX Extreme 77 System Manual4.5.3.5.6 DL / UL RatioThe DL/UL Ratio defines the ratio of transmit (downlink) time to receive (uplink) time, in percents.The available values are:DL = 70% : UL = 30% - applicable only for BWs 7MHz and 3.5MHz. (complies with DL/UL slots ratio of 24, 9)DL = 65% : UL = 35% - applicable only for BWs 10MHz and 5MHz. (complies with DL/UL slots ratio of 32, 15)DL = 60% : UL = 40% - applicable for BWs 10, 7, 5 and 3.5MHz. (complies with DL/UL slots ratio of 29, 18 and 21, 12)DL = 55% : UL = 45% - applicable for BWs 10, 7, 5 and 3.5MHz. (complies with DL/UL slots ratio of 26, 21 and 18,15 or SQN initiated as 53%-47%)DL = 50% : UL = 50% - applicable only for BWs 10MHz and 5MHz. (complies with DL/UL slots ratio of 23, 24 or SQN initiated as 47%-53%)DL = 45% : UL = 55% - applicable only for BWs 7MHz and 3.5MHz. (complies with DL/UL slots ratio of 15, 18 or SQN initiated as 44%-56%)DL = 35% : UL = 65% - applicable only for BWs 7MHz and 3.5MHz. (complies with DL/UL slots ratio of 12, 21)The default is DL = 60% : UL = 40%. In the current release only this option is supported, with compliance to DL/UL slots ratio of 29, 18.A change in the configured DL/UL Ratio is applied only after reset.NOTEIn the current release only ratio of DL = 60% : UL = 40% with compliance to DL/UL slots ratio of 29, 18 is supported. Other options described below will be supported by future releases.CAUTIONThe DL/UL Ratio of all BTSs in the same coverage area (neighboring cells) must be set to the same value to ensure optimal performance and avoid uplink saturation.

Chapter 4 - Operation and Administration BTS MenuBreezeMAX Extreme 78 System Manual4.5.3.5.7 Band NameThe Band Name to be used. In all units operating in the licensed 2.x or 3.x GHz bands only a single Band Name is applicable, according to the unit’s HW properties. In 5GHz units several Band Name options are available to support different local regulations.The default for 4.9 GHz units is 4.9 GHz Universal.The default for 5.4 GHz units is 5.4 GHz Universal.The parameters that are affected by the selected Band Name are:Supported frequency range. For details refer to “Frequency” on page 125.Maximum EIRP allowed by regulations. This parameter affects the allowed range for Tx Power. For more details refer to “Tx Power” on page 126.Required DFS algorithm. For more details refer to “DFS” on page 79.Table 4-2: Band Name’s Dependent Parameters, 4.9 GHz UnitsBand Name Frequency Range (MHz) Maximum EIRP (dBm) Supported DFS5 MHz BW 10 MHz BW4.9 GHz Universal 4900-5470 No Limit No Limit None4.9 GHz Brazil FCC 4940-4990 No Limit No Limit None4.9 GHz Japan 1 4900-5000 34 34 None4.9 GHz Japan 2 5030-5091 34 34 None5.1-5.3 GHz ETSI 5150-5350 20 23 Normal ETSI5.3 GHz ETSI 5250-5350 20 23 ETSI5.2 GHz ETSI 5150-5250 27 30 None5.2 GHz FCC 5150-5250 27 30 None5.3 GHz FCC 5250-5350 27 30 FCC5.1-5.3 GHz FCC 5150-5350 27 30 Normal FCC5.1 GHz FAAA 5090-5150 No Limit No Limit None

Chapter 4 - Operation and Administration BTS MenuBreezeMAX Extreme 79 System Manual* The frequency 5725 MHz is illegal and cannot be used.4.5.3.5.8 DFSThe DFS option is applicable only for units operating in the 5 GHz frequency bands using a Band Name specifying that DFS should be used. The DFS feature is managed separately for each sector (see “DFS” on page 128). The BTS level DFS parameters are common to both sectors (if applicable) and it includes the following parameters:DFS TypeFrequencies Management Level4.5.3.5.8.1 DFS TypeThe DFS Type parameter defines the DFS algorithm to be used. This read-only parameter is set according to the DFS type specified in the selected Band Name.The available DFS algorithm (according to the selected Band Name) are:ETSI/FCC: The algorithm searches for radars according to relevant ETSI or FCC regulations. To increase the probability of radar detection for compliance with the relevant regulations, additional silence zone is added to the uplink at the expense of slightly reduced throughput in the downlink. This means that although the specified DL-UL Ratio is 60-40, the actual DL-UL Ratio is 40-60 in ETSI and 45-65 in FCC.Table 4-3: Band Name’s Dependent Parameters, 5.4 GHz UnitsBand Name Frequency Range (MHz) Maximum EIRP (dBm) Supported DFS5 MHz BW 10 MHz BW5.4 GHz Universal 5470-5900* No Limit No Limit None5.9 GHz Universal 5900-5950 No Limit No Limit None5.4 GHz ETSI 5470-5725 27 30 ETSI5.8 GHz ETSI 5725-5875 30 33 ETSI5.4 GHz FCC 5470-5725 33 36 FCC5.8 GHz FCC 5725-5875 33 36 None5.4 - 5.8 GHz ETSI 5470-5875* 30 33 Normal ETSI5.4 - 5.8 GHz FCC 5470-5875* 33 36 Normal FCC

Chapter 4 - Operation and Administration BTS MenuBreezeMAX Extreme 80 System ManualNormal ETSI/Normal FCC: The algorithm searches for radars according to relevant ETSI or FCC regulations. However, the DL/UL ratio is not affected (probability of detection is lower than required by the relevant regulations).4.5.3.5.8.2 Frequencies Management LevelThe Frequencies Management Level defines the method of handling the DFS Frequencies Table (see “Update” on page 154) when two sectors use DFS. When set to Sector Level, the Frequencies Table of each sector is managed independently. When set to BTS Level, each sector uses information about frequencies (Radar Detected/Clear Channel) from the other one.The default is Sector Level.Table 4-4: Supported DFS, 4.9 GHz UnitsBand Name Supported DFS4.9 GHz Universal None4.9 GHz Brazil FCC None4.9 GHz Japan None5.1-5.3 GHz ETSI Normal ETSI5.3 GHz ETSI ETSI5.2 GHz ETSI None5.2 GHz FCC None5.3 GHz FCC FCC5.1-5.3 GHz FCC Normal FCC5.1 GHz FAAA NoneTable 4-5: Supported DFS, 5.4 GHz UnitsBand Name Supported DFS5.4 GHz Universal None5.9 GHz Universal None5.4 GHz ETSI ETSI5.8 GHz ETSI ETSI5.4 GHz FCC FCC5.8 GHz FCC None5.4 - 5.8 GHz ETSI Normal ETSI5.4 - 5.8 GHz FCC Normal FCC

Chapter 4 - Operation and Administration BTS MenuBreezeMAX Extreme 81 System Manual4.5.4 Unit ControlThe Unit Control menu of the enables changing the access Passwords, resetting the BTS, reverting to the factory default configuration, managing the SW versions of the BTS and uploading/downloading configuration backup files.The Unit Control menu includes the following options:Change PasswordReset BTSReset to BTS Factory DefaultsSW Version ControlConfiguration File ControlMonitor Inactivity Timeout4.5.4.1 Change PasswordFor security and control reasons, the Change Password option is available only for users with Administration access rights. The Change Password option enables defining the passwords for each of the three different access levels: Administrator, Installer and Monitor. After changing the password for a selected access level, you will be prompted to re-enter the new password for confirmation.Valid passwords: 1 to 16 printable characters, case sensitive.The default passwords are:NOTEFor security reasons, the passwords do not change after performing the Set Factory Defaults operation.Table 4-6: Default PasswordsAccess Level Default PasswordAdministrator adminInstaller installerMonitor monitor

Chapter 4 - Operation and Administration BTS MenuBreezeMAX Extreme 82 System Manual4.5.4.2 Reset BTSSelect this option to reset the BTS. To avoid unintentional reset, you will be prompted to confirm the reset request. Changes to some of the configurable parameters are applied only after reset.Refer to “Parameters Summary” on page 170 for information on which parameters are changeable in run time and which changes are applied only after reset.4.5.4.3 Reset to BTS Factory DefaultsSelect this option to set the BTS parameters to their factory default values. All parameters, excluding the access Passwords, BTS General parameters and BTS Connectivity parameters (required to enable remote management of the BTS) will revert to their default values after the next reset. Note that AAA servers and Authorized Managers will be deleted. Services (if applicable) are not deleted.Refer to “Parameters Summary” on page 170 for information on the factory default values of all parameters.4.5.4.4 SW Version ControlThe BTS can contain two SW versions:Operational: Each time the BTS resets it will reboot using the version defined as Operational.Shadow: Normally the Shadow version is the backup version. Each time a new SW File is downloaded to the BTS, it will be stored as a Shadow version, replacing the previous Shadow Version.The typical process of upgrading to a new SW version includes the following steps:1Download the new SW File to the BTS. It will be stored as the Shadow version.2Reset and run the module from its Shadow version. Note that at this stage, if a reset were to occur, the BTS will return to the previous Operational version.3If you want to continue using the new version, swap the Shadow and Operational versions. The new (currently running) version is now defined as Operational, and will be used each time the module reboots. The previous version is defined now as Shadow.Each SW version includes two identifiers:SW File, which is the name of the downloaded SW file. This name does not necessarily include clear identification of the SW version number.

Chapter 4 - Operation and Administration BTS MenuBreezeMAX Extreme 83 System ManualSW Version, which provides the SW version number.The SW Version Control submenu includes the following options:Show VersionsShow Activation and Status ParametersLoad to ShadowReset and Run from ShadowSet Running Version as Operational4.5.4.4.1 Show VersionsSelect this option to view the current available versions and the running version:Operational SW FileOperational SW VersionShadow SW FileShadow SW VersionRunning From: Operational or ShadowOperational Boot SW Version4.5.4.4.2 Show Activation and Status ParametersSelect this option to view details on the last requested Load to Shadow or Load Boot SW operation. The displayed details include:Process Initiator IP Address: The IP address of the station that initiated the process.Process Status: The status/results of the last SW loading process. The status can be None, In Progress, Completed Successfully, or Failed. For a failed process the reason is also provided. A process may fail due to various reasons including TFTP problem, the SW file may already exist in the device, there is not sufficient memory space or a CRC error.

Chapter 4 - Operation and Administration BTS MenuBreezeMAX Extreme 84 System Manual4.5.4.4.3 Load to ShadowThe Load to Shadow option enables initiating a process of loading a new SW file to the BTS. The loaded SW file will be stored as the new Shadow file.The following parameters should be configured each time you want to initiate a Load to Shadow operation:TFTP Server IP Address: The IP address of the TFTP Server holding the SW file to be loaded.File Name: The path to and file name of the SW file to be loaded. A string comprising 1 to 80 characters.4.5.4.4.4 Reset and Run from ShadowSelect the Run from Shadow option to reset the BTS and run the Shadow version after power up. To avoid unintentional actions you will be prompted to confirm the request.4.5.4.4.5 Set Running Version as OperationalWhen the BTS is running the Shadow version (after selecting Reset and Run from Shadow), it will boot from the Operational version after the next reset. Select the Set as Operational option if you want to swap versions so that the running version will become the Operational version and will be the version to be used after reset. To avoid unintentional actions you will be prompted to confirm the request.4.5.4.5 Configuration File ControlThe Configuration File Control submenu enables creating backup files of the BTS configuration and uploading/downloading a configuration file from/to the BTS. It also enables creating and uploading an Event Log file from the BTS.The Configuration File Control menu also enables downloading a Frequency Bands File to the BTS. A Frequency Bands File includes all relevant parameters of the frequency band supported by the device such as frequency range, resolution, allowed Tx Power range, etc. The option to download a Frequency Bands File enables loading an updated version of the file (if necessary) without the need to replace the SW version.The Configuration File Control menu includes the following menu options:Upload Configuration File From The UnitDownload Configuration File To The Unit

Chapter 4 - Operation and Administration BTS MenuBreezeMAX Extreme 85 System ManualShow Activation and Status Parameters4.5.4.5.1 Upload Configuration File From The UnitThe Upload Configuration File menu includes the following options:Create Full Configuration FileCreate Services (SP & MSF) FileCreate Event Log FileActivate Upload Operation4.5.4.5.1.1 Create Full Configuration FileThe Create Full Configuration File option enables creating an updated configuration file that contains all the configurable parameters of the device.4.5.4.5.1.2 Create Services (SP & MSF) FileThe Create Services (SP & MSF) File option enables creating an updated configuration file that contains all the Services related parameters. This includes the Service Profiles and Multiple Service Flows with all the relevant components (QoS Profiles, Service Rules, Classifiers, Service Groups, Service Interfaces and Forwarding Rules). This option is not applicable for External ASN-GW working mode.4.5.4.5.1.3 Create Event Log FileThe Create Event Log File option enables creating an updated file that contains all the events in the device’s event log.4.5.4.5.1.4 Activate Upload OperationThe Activate Upload Operation option enables initiating a process of uploading a configuration file to an external TFTP server. The following parameters should be configured each time you want to initiate a configuration file upload operation:File Type: Full Configuration, Services (SP & MSF) File or Event Log File. Note that the Services (SP & MSF) File option is not applicable for External ASN-GW working mode.TFTP Server IP Address: The IP address of the TFTP Server to which the file should be loaded.

Chapter 4 - Operation and Administration BTS MenuBreezeMAX Extreme 86 System ManualFile Path and Name: The path to and file name to be assigned to the uploaded file in the TFTP server. A string comprising 1 to 80 characters.The default file names are: »Full Configuration: backup.res»Services: profiles_srvc.res»Event Log: traps_logs.res4.5.4.5.2 Download Configuration File To The UnitThe Download Configuration File option enables initiating a process of downloading a file from an external TFTP server. To initiate a new download operation, configure the following parameters and reset the unit:File Type: Full Configuration, Services (SP & MSF) File, or Frequency File.Note that the Services (SP & MSF) File option is not applicable for External ASN-GW working mode.TFTP Server IP Address: The IP address of the TFTP Server to which the file should be loaded.File Path and Name: The path to and file name of the file to be downloaded. A string comprising 1 to 80 characters.The default file names are: »Full Configuration: backup.res»Services: profiles_srvc.res»Frequency File: Rfu.db4.5.4.5.3 Show Activation and Status ParametersSelect this option to view details on the last requested upload/download operation.NOTETo avoid loss of connectivity behind a router, the Management Connectivity parameters are not changed when loading a Full backup file to the BTS. The values of these parameters configured in the target BTS before the loading process, are maintained.

Chapter 4 - Operation and Administration BTS MenuBreezeMAX Extreme 87 System Manual4.5.4.6 Monitor Inactivity TimeoutThe Monitor Inactivity Timeout (min) parameter determines the amount of inactive time following which the unit automatically exits the Monitor program. The time out duration can range from 0 to 60 minutes. 0 means no inactivity timeout.The default value is 10 minutes.4.5.5 Fault ManagementThe Fault Management menu includes the following options:Trap ConfigurationShow Active Alarm Log TableEvent Log Selection CriteriaShow Event Log Table By Selection CriteriaShow All Event Log Table4.5.5.1 Trap ConfigurationThe Trap Configuration menu enables viewing current parameters of all traps and updating the parameters of a selected trap. It also enables viewing traps with modified parameters (different from the default) and restoring the configuration of all modified traps to their default values.The available options are:ShowDistribution EnabledAlarm SeveritySuppression Interval4.5.5.1.1 ShowSelect this option to view a list of all traps and their parameters. For each trap, the following details are displayed:

Chapter 4 - Operation and Administration BTS MenuBreezeMAX Extreme 88 System ManualTrap IDNameDistribution Enabled (the default for all traps is Enabled)Suppression Interval (in seconds. The default is 0, which means no suppression).Default Severity*Current Severity** The Severity parameter is applicable only for Alarm traps. It is not applicable to other trap categories (System Event, Configuration Change Event).4.5.5.1.2 Distribution EnabledThe Distribution Enabled submenu includes the following options:Show Distribution Disabled Traps: Displays all traps with Distribution Enabled parameter set to Disable (the default Admin Status for all traps is Enabled).Update: Enables modifying the Distribution Enabled parameter of a selected trap.Restore Distribution Enabled Defaults: Enables restoring the Distribution Enabled parameter of all traps to the default value (Enable).4.5.5.1.3 Alarm SeverityThe Alarm Severity option is applicable only for Alarm traps.The Alarm Severity submenu includes the following options:Show Modified Traps (Severity Changed): Displays the current and default Severity for all Alarm traps with modified Severity (different from the default).Update: Enables modifying the Severity parameter of a selected Alarm trap. The available options are Indeterminate, Critical, Major, Minor, Warning.Restore Severity Defaults: Enables restoring the default Severity parameter of all traps to the default value.

Chapter 4 - Operation and Administration BTS MenuBreezeMAX Extreme 89 System Manual4.5.5.1.4 Suppression IntervalThe Suppression submenu includes the following options:Show Modified Traps (Suppression Interval Changed): Displays all traps with a modified Suppression Interval (the default for all traps is 0).Update: Enables modifying the Suppression Interval parameter of a selected trap. The available range is from 0 to 86,400 (seconds). The default is 0, which means no suppression.Restore Suppression Interval Defaults: Enables restoring the Suppression Interval parameter of all traps to the default value (0, meaning no suppression).4.5.5.2 Show Active Alarm Log TableSelect to view the currently active alarms. For each active alarm, the following details are displayed:Seq#: The sequential identification number of the event (trap).Time: The Date and Time at which the alarm was generated.MO Type & Instance: The Type and Instance (ID number) of the applicable Managed Object. Event Type: The type of event (first level of event description). Probable Cause: The probable cause of the event (second level of event description). Specific Problem: The specific problem that caused the event (third level of event description).Alarm Severity: The defined severity of the Alarm.Object Severity: The combined events severity for the Managed Object at the time at which the alarm was generated.

Chapter 4 - Operation and Administration BTS MenuBreezeMAX Extreme 90 System Manual4.5.5.3 Event Log Selection CriteriaThis submenu enables Select to view/update the filtering criteria for the Show Event Log Table By Selection Criteria display (see “Show Event Log Table By Selection Criteria” on page 91). The configurable filtering criteria are:Minimum SeverityLast DaysManaged Object TypeSpecific Event Category4.5.5.3.1 Minimum SeverityThe Minimum Severity parameter enables defining the minimum severity filter. Traps whose severity is below the defined severity will not be displayed. The available options are Clear, Indeterminate, Critical, Major, Minor, Warning.The default is Clear severity, which means that all the traps in the log will be displayed, including traps indicating that a problem has been resolved (cleared).4.5.5.3.2 Last DaysThe Days parameter enables defining the period for which traps will be displayed. The available options are from 1 to 31 days. Only traps that occurred within the last N days, where N is the value selected for this parameter, will be displayed.The default is 1 day4.5.5.3.3 Managed Object TypeThe Managed Object Type parameter enable limiting the display to traps associated with a specific Managed Object type. The available options are All, BTS, ASN GW, Sector, BS, Radio Channel, GPS, Antenna, and MS.The default is All.4.5.5.3.4 Specific Event CategoryThe Specific Event Category parameter enables limiting the display to traps of a certain category. The available options are All, Alarm, State Change, Configuration Change, System Event.

Chapter 4 - Operation and Administration BTS MenuBreezeMAX Extreme 91 System ManualThe default is All. 4.5.5.4 Show Event Log Table By Selection CriteriaSelect this option to display details of all events that meet the defined filtering criteria (see “Event Log Selection Criteria” on page 90). For each event, the following details are displayed:Seq#: The sequential identification number of the event (trap).Time: The Date and Time at which the event was generated.MO Type & Instance: The Type and Instance (ID number) of the applicable Managed Object. Event Type: The type of event (first level of event description). Probable Cause: The probable cause of the event (second level of event description). Specific Problem: The specific problem that caused the event (third level of event description).Event Severity: The defined severity of the Event.Object Severity: The combined events severity for the Managed Object at the time at which the event was generated.Group OID: Applicable only for Configuration Change event. Indication of the changed parameter or the group of parameters where a change occurred.Event Description: Description of the event.Specific Data: Additional details on the event.4.5.5.5 Show All Event Log TableSelect this option to display all events logged in the device without any filtering. The displayed details are the same as for “Show Event Log Table By Selection Criteria” on page 91.

Chapter 4 - Operation and Administration BTS MenuBreezeMAX Extreme 92 System Manual4.5.6 Performance CountersThe Performance Counters menu enables viewing and resetting the Traffic counters of the Data Ethernet interface and of the Data Path. The displayed information and counters include:4.5.6.1 EthernetGeneral Interface DetailsMTU: The size of the largest packet which can be sent/received on the interface, specified in octets.Speed: The speed of the interface in bits per second.BTS MAC Address: The MAC address of the interface.Operational Status: The current operational state of the interface (Up/Down/Testing). The Testing state indicates that no operational packets can be passed.Ethernet Interface Counters:Received Bytes: The number of octets in valid MAC frames received on this interface, including the MAC header and FCS.Received Unicast Packets: The number of packets received on this interface, which were not addressed to a multicast or broadcast address.Received And Discarded Packets: The number of received packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free up buffer space.Received Multicast Packets: The number of packets received on this interface, which were addressed to a multicast address.Received Broadcast Packets: The number of packets received on this interface, which were addressed to the broadcast address.Transmitted Bytes: The number of octets transmitted in MAC frames on this interface, including the MAC header and FCS.

Chapter 4 - Operation and Administration BTS MenuBreezeMAX Extreme 93 System ManualTransmitted Unicast Packets: The number of packets transmitted on this interface, which were not addressed to a multicast or broadcast address.Packets Discarded On Tx: The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space.Transmitted Multicast Packets: The number of packets transmitted on this interface, which were addressed to a multicast address.Transmitted Broadcast Packets: The number of packets transmitted on this interface, which were addressed to the broadcast address.Report Flag (ifPromiscuousMode): This object has a value of false(2) if this interface only accepts packets/frames that are addressed to this station. This object has a value of true(1) when the station accepts all packets/frames transmitted on the media. The value does not affect the reception of broadcast and multicast packets/frames by the interface.4.5.6.2 Data PathThe Data Path counters provides information on data path (customer services) traffic. The data path counters are:Received Bytes: The number of received data path octets.Received Unicast Packets: The number of received data path unicast packets.Received And Discarded Packets: The number of received data path packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free up buffer space.Received Multicast Packets: The number of received data path multicast packets.Received Broadcast Packets: The number of received data path broadcast packets.Total Received Packets: The total number of received data path packets.

Chapter 4 - Operation and Administration BTS MenuBreezeMAX Extreme 94 System ManualPacket Dropped from Input Queue: The number of packets that were dropped from the queue of packets forwarded by the Ethernet interface.Transmitted Bytes: The number of transmitted data path octets.Transmitted Unicast Packets: The number of transmitted data path unicast packets.Packets Discarded On Tx: The number of outbound data path packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space.Transmitted Multicast Packets: The number of transmitted data path multicast packets.Transmitted Broadcast Packets: The number of transmitted data path broadcast packets.

Chapter 4 - Operation and Administration ASN-GW MenuBreezeMAX Extreme 95 System Manual4.6 ASN-GW MenuThe ASN-GW menu includes the following options:AAAServices Menu4.6.1 AAA4.6.1.1 Working with RADIUS ServersManaging a large number of users creates the need for significant administrative support together with careful attention to security, authorization and accounting. The use of RADIUS (Remote Authentication Dial In User Service) enables operators to manage a single database of users, supporting authentication (verifying user name and password) as well as configuration information detailing the type of service to deliver to the user and the traffic that the user transmitted and received, for billing proposes.RADIUS is a protocol for carrying authentication, authorization, and configuration information between a Network Access Server (NAS), which desires to authenticate its links, and a shared Authentication server. A Network Access Server operates as a client of RADIUS. The client is responsible for passing user information to designated RADIUS server(s), and then acting on the response. RADIUS servers are responsible for receiving user connection requests, authenticating the user, and then returning all configuration information necessary for the client to deliver service to the user. In BreezeMAX Extreme systems, a RADIUS NAS is implemented in each BTS. MS authentication and service provisioning are managed by a RADIUS Authentication server if the BTS working mode is Embedded Distributed ASN-GW Authenticated (If the BTS working mode is Embedded Distributed ASN-GW Not Authenticated MS authentication and service provisioning are managed by the embedded ASN-GW using local configuration. In External ASN-GW working mode the entire ASN-GW functionality resides outside the BTS).Transactions between the client and RADIUS server are authenticated using Password Authentication Protocol (PAP) through encryption based on RSA Message Digest Algorithm MD5 and a Shared Secret, which is never sent over the network.

Chapter 4 - Operation and Administration ASN-GW MenuBreezeMAX Extreme 96 System ManualThe Access-Request is submitted to the RADIUS server via the network. If no response is returned within a length of time, the request is re-sent a number of times. Once the RADIUS server receives the request, it validates the sending client. A request from a client for which the RADIUS server does not have a shared secret must be silently discarded. If the client is valid, the RADIUS server consults a database of users to find the user whose User Name matches the request. The user entry in the database contains the User Password that must be verified.The MS authentication and service provisioning process when the BTS Working Mode is Embedded Distributed ASN-GW Authenticated is:1User Name and Password should be configured in the MS.2All required Service Profiles and Multiple Service Flows, including their components, should be configured in the BTS.3The RADIUS Authentication server(s) should be configured with the relevant MS’s details (User Name and Password) and their corresponding services, including the relevant service parameters (references to Service Profiles and Multiple Service Flows).4When an MS attempt registering at the BTS, the BTS searches within its local database. The details of each MS (and the provisioned Services) are maintained in the database for about 20 minutes after being disconnected. If this MS will reconnect within 20 minutes, they will be provisioned with the same service(s) without re-authentication.5The RADIUS server searches for the corresponding service(s) defined for the MS (based on the User Name and Password). »If it finds the applicable service(s) the RADIUS server replies to the ASN-GW with an access-accept message that includes the relevant Service(s) parameters.»If the RADIUS server does not find matching MS’s credentials or defined service(s), it replies to the ASN-GW with a reject message.6According to the response from the RADIUS server, the ASN-GW either authenticates the MS and provides the appropriate service(s) or rejects the MS.7Part of the information sent from the RADIUS server can include the Authentication Time Out. Before the end of this time the ASN-GW should re-authenticate the MS with the RADIUS server. This allows the operator to stop service for a customer even if the MS was not reset and the network entry process was not re-started.

Chapter 4 - Operation and Administration ASN-GW MenuBreezeMAX Extreme 97 System ManualA RADIUS server can be used for authentication purposes only, for accounting purposes only, or for both authentication and accounting purposes. In the current release one server of each type can be defined.The AAA menu includes the following options:Show SummaryConfiguration4.6.1.2 Show SummarySelect the Show Summary option to view the configuration and status details for the general AAA Client parameters and for each of the defined Authentication and/or Accounting Servers. For more details on these parameters refer to the relevant sections in the AAA Configuration menu below.4.6.1.3 ConfigurationThe AAA Configuration menu includes the following options:AAA Client Authentication ServerAccounting4.6.1.3.1 AAA ClientThe AAA Client menu enables viewing and updating general parameters that affect the communication with all RADIUS servers. These parameters include:Retry Interval (sec)Maximum Number of RetriesKeep Alive Timeout (sec)4.6.1.3.1.1 Retry Interval (sec)The Retry Interval parameter defines the time in seconds to wait before retransmitting a RADIUS message if no response is received. The range is 1-30 (seconds).The default value is 5 (seconds).

Chapter 4 - Operation and Administration ASN-GW MenuBreezeMAX Extreme 98 System Manual4.6.1.3.1.2 Maximum Number of RetriesThe Maximum Number of Retries parameter defines the maximum number of retransmission attempts, before a decision is taken to revert to another server if configured (not applicable for current release where only one server of each type can be defined), or give up.The range is 1-10 (retries).The default value is 3 (retries).4.6.1.3.1.3 Keep Alive Timeout (sec)The NPU maintains a keep alive mechanism with all defined servers. The Keep Alive Timeout defines the time in seconds between keep alive messages.The range is 60-180 (seconds).The default value is 60 (seconds).4.6.1.3.2 Authentication ServerThe Authentication Server menu enables viewing the status and parameters of a defined Authentication server, adding a new server (in the current release one server can be defined), updating the parameters of a selected server, or deleting a server from the database.The Authentication menu includes the following options:Show SummarySelectAddNOTEWhen the BTS sends keep alive message to the server, it uses it's own default User Name and User Password.These User Name and User Password must be configured in the users list (the same list used for the MSs) of the server, otherwise the server will response with a reject message as "User name not found", and the BTS will process these rejects as a proper answer, and keep the AAA status as "up". This means that even if "KeepAliveUserNameAndPassword" is not defined, the keepalive mechanism will still works.The default User Name of the BTS is: KeepAliveUserNameAndPassword.The default User Password of the BTS is: KeepAliveUserNameAndPasswordThe default User Name and User Password of the BTS are not configurable.

Chapter 4 - Operation and Administration ASN-GW MenuBreezeMAX Extreme 99 System Manual4.6.1.3.2.1 Show SummarySelect this option to view the current configuration parameters and status details of a defined Authentication server. The following details are displayed:Server AddressServer AliasUDP Port NumberOperation Status: Up or Down (according to the keep alive mechanism)4.6.1.3.2.2 SelectThis option enables selecting an existing Authentication Server for viewing its status and parameters, updating its parameters, deleting it from the database or viewing its Statistics counters. The selection is based on the server's IP address.The available options for a selected server are:Show: Displays current status and parameters. For information on displayed details refer to Section 4.6.1.3.2.1).Update: to update the parameters of the server. For details on the configurable parameters refer to Section 4.6.1.3.2.3. The Server Address of an existing server cannot be modified.Delete: To delete the server from the database.

Chapter 4 - Operation and Administration ASN-GW MenuBreezeMAX Extreme 100 System ManualPerformance Counters: To display or reset the Performance Counters for this server. The Performance Counters display traffic information according to the standard RFC 2618 “RADIUS Authentication Client MIB”, as follows:»Round Trip Time: The time interval (in hundredths of a second) between the most recent Access-Reply/Access-Challenge and the Access-Request that matched it from this server.»Access Requests: The number of RADIUS Access-Request packets sent to this server. This does not include retransmissions.»Access Retransmissions: The number of RADIUS Access-Request packets retransmitted to this server.»Access Accepts: The number of RADIUS Access-Accept packets (valid or invalid) received from this server.»Access Rejects: The number of RADIUS Access-Reject packets (valid or invalid) received from this server.»Access Challenges: The number of RADIUS Access-Challenge packets (valid or invalid) received from this server.»Malformed Access Responses*: The number of malformed RADIUS Access-Response (Access-Accept, Access-Challenge or Access-Reject) packets received from this server. Malformed packets include packets with an invalid length. Bad authenticators or Signature attributes or unknown types are not included.»Bad Authenticators: The number of RADIUS Access-Response packets containing invalid authenticators or Signature attributes received from this server.»Pending Requests: The number of RADIUS Access-Request packets destined for this server that have not yet timed out or received a response. This counter is incremented when an Access-Request is sent and decremented due to receipt of an Access-Accept, Access-Reject or Access-Challenge, a timeout or retransmission.»Timeouts: The number of authentication timeouts to this server. After a timeout the client may retry to the same server, send to a different server, or give up. A retry to the same server is counted as a retransmit as well as

Chapter 4 - Operation and Administration ASN-GW MenuBreezeMAX Extreme 101 System Manuala timeout. A send to a different server is counted as a Request as well as a timeout.»Unknown Types: The number of RADIUS packets of unknown type which were received from this server on the authentication port.»Packets Dropped: The number of RADIUS packets of which were received from this server on the authentication port and dropped for any reason.* Malformed Access Responses counter is not supported in the current release.4.6.1.3.2.3 AddSelect this option to define a new Authentication server. In the current release one Authentication server can be defined. You will be prompted to configure the following parameters:4.6.1.3.2.3.1 Server AddressThe IP address of the Authentication server.The default is null (IP address must be defined).The IP Address of an existing server cannot be modified (to change it you must first delete the server).4.6.1.3.2.3.2 Server AliasAn reference name for the server.A string of 1 to 32 printable characters.The default is null (an alias must be defined).4.6.1.3.2.3.3 Shared SecretShared Secret is the key used for encrypting the User name and Password transmitted to the RADIUS server(s). For security and control reasons, the Shared Secret option is available only for users with Administration access rights, using the Administrator Password to access the program. For the same security reasons, the Shared Secret is displayed as a series of asterisks, and when defining it for the first time or updating it, the user is prompted to re-enter the new Shared Secret for confirmation.Valid Shared Secret: 1 to 16 printable characters, case sensitive.The default Shared Secret is null (Shared Secret must be defined).

Chapter 4 - Operation and Administration ASN-GW MenuBreezeMAX Extreme 102 System Manual4.6.1.3.2.3.4 UDP Port NumberSpecifies the UDP port number used by the RADIUS server for authentication transactions.Valid values: 1 to 65535. The default value is 1812 (RFC 2865 requirement).The UDP Port Number of an existing server cannot be modified (to change it you must first delete the server).4.6.1.3.3 AccountingThe Accounting menu enables viewing the status and parameters of a defined Accounting server, adding a new server (in the current release one server can be defined), updating the parameters of an existing server, or deleting a server from the database.The Accounting menu includes the following options:Show SummarySelectAdd4.6.1.3.3.1 Show SummarySelect this option to view the current status and parameters of a defined Accounting server. The following details are displayed:Server AddressServer AliasUDP Port NumberOperation Status: Up or Down (according to the keep alive mechanism)4.6.1.3.3.2 SelectThis option enables selecting an existing Accounting Server for viewing its status and parameters, updating its parameters, deleting it from the database or viewing its Statistics counters. The selection is based on the server's IP address.The available options for a selected server are:

Chapter 4 - Operation and Administration ASN-GW MenuBreezeMAX Extreme 103 System ManualShow: Displays current status and parameters. For information on displayed details refer to Section 4.6.1.3.3.1).Update: to update the parameters of the server. For details on the configurable parameters refer to Section 4.6.1.3.3.3. The Server IP Address of an existing server cannot be modified)Delete: To delete the server from the database.Performance Counters: To display or reset the Performance Counters for this server. The Performance Counters display traffic information according to the standard RFC 2620 “RADIUS Accounting Client MIB”, as follows:»Round Trip Time: The time interval (in hundredths of a second) between the most recent Accounting-Response and the Accounting-Request that matched it from this server.»Requests: The number of RADIUS Accounting-Request packets sent to this server. This does not include retransmissions.»Retransmissions: The number of RADIUS Accounting-Request packets retransmitted to this server. Retransmissions include retries where the Identifier and Acct-Delay have been updated, as well as those in which they remain the same.»Responses: The number of RADIUS packets received on the accounting port from this server.»Malformed Responses: The number of malformed RADIUS Accounting-Response packets received from this server. Malformed packets include packets with an invalid length. Bad authenticators or unknown types are not included.»Bad Authenticators: The number of RADIUS Accounting-Response packets containing invalid authenticators received from this server.»Pending Requests: The number of RADIUS Accounting-Request packets sent to this server that have not yet timed out or received a response. This counter is incremented when an Accounting-Request is sent and decremented due to receipt of an Accounting-Response, a timeout or retransmission.»Timeouts: The number of accounting timeouts to this server. After a timeout the client may retry the same server, send to a different server, or

Chapter 4 - Operation and Administration ASN-GW MenuBreezeMAX Extreme 104 System Manualgive up. A retry to the same server is counted as a retransmit as well as a timeout. A send to a different server is counted as an Accounting- Request as well as a timeout.»Unknown Types: The number of RADIUS packets of unknown type which were received from this server on the accounting port.»Packets Dropped: The number of RADIUS packets of which were received from this server on the accounting port and dropped for any reason.* Malformed Responses counter is not supported in the current release.4.6.1.3.3.3 AddSelect this option to define a new Accounting server. In the current release one Accounting server can be defined. You will be prompted to configure the following parameters:4.6.1.3.3.3.1 Server IP AddressThe IP address of the Accounting server.The default is null (IP address must be defined).4.6.1.3.3.3.2 Server AliasAn optional reference name for the server.A string of 1 to 32 printable characters.The default is null (an empty string).4.6.1.3.3.3.3 Shared SecretShared Secret is the key used for encrypting the User name and Password transmitted to the RADIUS server(s). For security and control reasons, the Shared Secret option is available only for users with Administration access rights, using the Administrator Password to access the program. The Shared Secret cannot be changed using SNMP. For the same security reasons, the Shared Secret is displayed as a series of asterisks, and when defining it for the first time or updating it, the user is prompted to re-enter the new Shared Secret for confirmation.Valid Shared Secret: 1 to 16 printable characters, case sensitive.The default Shared Secret is null (Shared Secret must be defined).4.6.1.3.3.3.4 UDP Port NumberSpecifies the UDP port number used by the RADIUS server for accounting transactions.

Chapter 4 - Operation and Administration ASN-GW MenuBreezeMAX Extreme 105 System ManualValid values: 1 to 65535. The default value is 1813 (RFC 2866 requirement).The UDP Port Number of an existing server cannot be modified (to change it you must first delete the server).4.6.2 Services Menu4.6.2.1 Common Operations in Services MenusThe menu options available in the Services menu enable viewing, editing, deleting and adding applicable entities, such as Service Profiles, QoS Profiles, etc.Some or all of the following options are available in the Services menus:Show Summary: Select this option to see the current details of all entities in the applicable menu.Select From List: Select this option to view all defined entities in the applicable menu sorted by the entity ID. The entity ID is an identifier attached automatically to each new entity. You can select a specific entity by its ID. This will open the Selected Entity menu with the Show, Update and Delete options described above.Select By...(or Select From a specific list): This option enables selecting an entity by a specific identifier such as Name or ID. Select this option and enter the appropriate parameter's value to access the menu for a selected entity. This will typically enable you to choose from the following options:»Show: Select this option to view the details of the selected entity.»Update: Select this option to edit the details of the selected entity.»Delete: Select this option to remove the selected entity from the database.Add: Select this option to add a new entity to the database.The Services menu includes the following options:MSs Services

Chapter 4 - Operation and Administration ASN-GW MenuBreezeMAX Extreme 111 System ManualThe maximum tolerated jitter for BE and NRT QoS is 10ms.4.6.2.4.4 Uplink/Downlink QoS ParametersThe availability of specific QoS parameters depend on the selected QoS Type as follows:4.6.2.4.4.1 CIRCIR is the minimum information transfer rate that the system is committed to transfer under normal conditions (minimum reserved traffic rate). The rate is averaged over a minimum increment of time, which is defined by the CT parameter.The range is from 32 to 54,000 Kbps.CIR is applicable for NRT QoS.4.6.2.4.4.2 MIRMIR is the maximum information rate that the system will allow for the connection (maximum sustained traffic rate). The rate is averaged over a minimum increment of time, which is defined by the CT parameter.The range is from 32 to 54,000 Kbps.MIR is applicable for BE and NRT QoS. MIR cannot be lower than CIR.4.6.2.5 Multiple Service FlowsThe Multiple Service Flows menu enables managing Multiple Service Flows, including the Service Rule(s) associated with each Multiple Service Flow. The menu for a selected Multiple Service Flow (after the basic parameters are defined) enables access to the Service Rules submenu. At least one Service Rule must be assigned to each Multiple Service Flow, up to a maximum of four Service Rules per Multiple Service Flow. For details refer to Service Rules (Section 4.6.2.6) below.The Multiple Service Flow basic parameters are:Multiple Service Flow IDMultiple Service Flow NameTable 4-8: QoS ParametersQoS Type QoS ParametersBE MIRNRT CIR, MIR

Chapter 4 - Operation and Administration ASN-GW MenuBreezeMAX Extreme 112 System ManualService Group Name4.6.2.5.1 Multiple Service Flow IDThis is an auto-sequential number from 1 to a maximum of 1030, generated automatically during creation of a new Multiple Service Flow.4.6.2.5.2 Multiple Service Flow NameThe Name of the Multiple Service Flow. A unique string of 1 to 32 characters.4.6.2.5.3 Service Group NameThe name of the Service Group associated with the Multiple Service Flow. Must be a name of a previously defined Service Group that exists in the database.4.6.2.5.4 Service Operation ModeThe Service Operation Mode parameter is applicable only to IP CS services. The Service Operation Mode parameter defines whether NAT routing is used by the MS or behind the MS (Router mode) or not (Bridge mode).In Bridge mode, the ASN-GW learns the IP address assigned to the MS, and associate with this IP address the VLAN ID defined in the Service Interface specified in the Service Rule that matches the connection used for DHCP.In Router mode, the ASN-GW checks all the Router mode Multiple Service Flows assigned to the same MS that use the same Service Group as the relevant connection, and associate with the IP address all VLAN IDs defined in relevant Service Interfaces.If the MS functions as a NAT router, all its Services will operate in Router mode. If there is a router behind the MS, the Management Service will operate in Bridge mode and other Services will operate in Router mode.4.6.2.6 Service RulesThe Service Rules menu enables managing Service Rules, including the Classifier(s) associated with each Service Rule. The menu for a selected Service Rule (after the basic parameters are defined) enables access to the Classifiers submenu. At least one Classifier must be assigned to each Service Rule, up to a maximum of five Classifiers per Service Rule. For details refer to Service Rules (Section 4.6.2.6) below.When either defining a new Service Rule and its components or updating an existing one, note that a Multiple Service Flow can include a maximum of one Service Rule with a Classifier of type Any.The Service Rule basic parameters are:

Chapter 4 - Operation and Administration ASN-GW MenuBreezeMAX Extreme 113 System ManualService Rule IDService Interface Name4.6.2.6.1 Service Rule IDThis is an auto-sequential number from 1 to a maximum of 4, generated automatically during creation of a new Service Rule for a specific Multiple Service Flow.4.6.2.6.2 Service Interface NameThe Name of the Service Interface associated with the Service Rule. Must ne one of the previously defined Service Interfaces that exists in the database.4.6.2.7 ClassifiersThe Classifiers submenu option for a selected Service Rule enables managing the Classifier(s) assigned to the Service Rule. At least one Classifier must be assigned to each Service Rule, up to a maximum of five Classifiers per Service Rule.Note the following rules when either defining a new Classifier or updating an existing one:A maximum of one Classifier of type Any for a certain direction can be associated with each MS. This means:»A Service Rule can include a maximum of one Classifier of type Any for a certain direction.»A Multiple Service Flow can include a maximum of one Service Rule with a Classifier of type Any for a certain direction.»An MS can have a maximum of one Service associated with a Multiple Service Flow with a Service Rule with a Classifier of type Any for a certain direction.Overlapping of range values is not allowed. This is applicable for:»The Service Rule level: The range values defined for any Classifier of a certain Type for a certain direction assigned to a Service Rule should not overlap with the range values of other Classifiers of the same Type for the same direction assigned to the same Service Rule.»The Multiple Service Flow level: The range values defined for any Classifier of a certain Type for a certain direction assigned to a Service Rule of a

Chapter 4 - Operation and Administration ASN-GW MenuBreezeMAX Extreme 114 System Manualcertain Multiple Service Flow, should not overlap with the range values of any Classifiers of the same Type for the same direction assigned to other Service Rules assigned to the same Multiple Service Flow. »The MS level: The range values defined for any Classifier of a certain Type for a certain direction assigned to a Service Rule of any Multiple Service Flow assigned to any Service for a certain MS, should not overlap with the range values of any Classifiers of the same Type for the same direction assigned to any of the Service Rules assigned to other Multiple Service Flows that are assigned to other Services for the same MS.Each Classifier includes the following components:4.6.2.7.1 Uplink/Downlink Classifier TypeThis parameter defines the type of classifier to be used in the applicable direction. Different classifier types may be defined for the uplink and downlink directions. The available options in the current release are Any and DSCP.For a Classifier Type Any there are no other parameters.4.6.2.7.2 Uplink/Downlink Classifier Parameter 1 and 2Each Classifier of any type other than None can define a range of value to be used for classification. These parameters defines the lowest and highest values in the range. The applicable range for DSCP classifier is from 0 to 63.The value configured for Parameter 2 for a certain direction cannot be lower than the value configured for Parameter 1 for the same direction.Note that the value configured for any of these parameters cannot be within the ranges defined for other Classifiers of the same Type and Direction assigned to either the same Service Rule, or to other Service Rules assigned to the same Multiple Service Flow. NOTEIn the current release only Classifiers of Types None and DSCP are supported. Other Classifier Types that will be applicable only for Ethernet CS Service Interfaces that are not supported in the current release.Table 4-9: Classifier ParametersUplink/Downlink Classifier Type Uplink/Downlink Classifier Parameter 1 Uplink/Downlink Classifier Parameter 2Any - -DSCP Lowest DSCP Value Highest DSCP Value

Chapter 4 - Operation and Administration ASN-GW MenuBreezeMAX Extreme 115 System Manual4.6.2.8 Service GroupsA Service Group defines the DHCP mode to be used for acquiring IP address configuration for the MS provisioned with the relevant Service and, if applicable, for other devices behind the MS. It also defines additional parameters that affect the communication between the ASN-GW and an external DHCP server, if applicable. The Service Group’s parameters includes also the Attributes to be used for communication with a RADIUS Accounting server.Up to 10 different Service Groups can be defined.Each Service Group includes the following parameters:4.6.2.8.1 Service Group IDThis is an auto-sequential number from 1 to a maximum of 10, generated automatically during creation of a new Service Group.4.6.2.8.2 Service Group NameThe Name of the Service Group. A unique string of 1 to 32 characters.4.6.2.8.3 DHCP TypeIn the current release only Transparent mode is supported.4.6.2.8.4 Nomadic ModeThe Nomadic Mode parameter ia applicable only in Transparent DHCP operation mode. It defines whether nomadic operation of the MS should be supported by the provisioning and accounting mechanism. When disabled, the provisioned services should be supported only when the MS is served by a specific BTS. When enabled, provisioned services should not be restricted to a specific BTS.The default is Disable.4.6.2.8.5 Attribute 31The Attribute 31 parameter is applicable for all DHCP operation modes, defining information that should be used by the embedded RADIUS client. Attribute 31 specifies the Calling Station ID information to be included in RADIUS Access-Request and Accounting-Request messages. This feature enables service providers to provide more information about the call originator to the RADIUS server(s). The information provided by this feature can also be used for additional security checks.NOTEIn the current release only Transparent DHCP is supported. Other DHCP Types and their components are not supported in the current release.

Chapter 4 - Operation and Administration ASN-GW MenuBreezeMAX Extreme 116 System ManualIn RADIUS Access-Request messages Attribute 31 is set by default to CPE MAC Address. The configurable Attribute 31 parameter is applicable only for RADIUS accounting messages.The available options are None, CPE MAC Address and CPE Fully Qualified Domain Name.The default option is CPE MAC Address.4.6.2.8.6 Attribute 32The Attribute 32 parameter is applicable for all DHCP operation modes, defining information that should be used by the embedded RADIUS client. Attribute 32 specifies the NAS Identifier information to be included in RADIUS Access-Request and Accounting-Request messages. This feature enables service providers to provide more information about the device serving the call originator to the RADIUS server(s). The information provided by this feature can also be used for additional security checks.In RADIUS Access-Request messages Attribute 32 is set by default to BTS ID. The configurable Attribute 32 parameter is applicable only for RADIUS accounting messages.The available options are None, BTS MAC Address, GIADDR, Service Interface VLAN, Management IP Address, BS ID, BTS Name, Free Text. If the Free Text option is selected, a unique string of 1 to 32 characters should be specified.The default option is None.4.6.2.8.7 Attribute 32 Free TextApplicable only if the selected option for Attribute 32 is Free Text. A string of 1 to 32 characters to be used as a unique NAS ID in relevant RADIUS accounting messages.The default is an empty string (must be configured to a valid value if Free Text is the selected option for Attribute 32).4.6.2.9 Service InterfacesThe Service Interface menu enables managing the parameters of the interface used by the NPU on the network side for a services using a specific Service Interface. Up to 1024 different Service Interfaces can be defined.NOTEIn the current release only IP CS Service Interfaces are supported. The Ethernet CS Service Interface described below is not supported in the current release.

Chapter 4 - Operation and Administration ASN-GW MenuBreezeMAX Extreme 117 System ManualEach Service Interface includes the following parameters:4.6.2.9.1 Service Interface IDThis is an auto-sequential number from 1 to a maximum of 1024, generated automatically during creation of a new Service Interface.4.6.2.9.2 Service Interface NameThe Name of the Service Interface. A unique string of 1 to 32 characters.4.6.2.9.3 Forwarding Rule NameThe Name of the Forwarding Rule used by the Service Interface. Must ne one of the previously defined Forwarding Rules that exists in the database.4.6.2.9.4 CS TypeThe Convergence Sublayer Type: Ethernet CS or IP CS. The default is IP CS.4.6.2.9.5 VLAN InterfaceThe VLAN Interface parameter defines how VLAN tags in packets forwarded on the interface are handled:The VLAN Interface parameter is applicable only in IP CS. In Ethernet CS it is always set to Enable.If VLAN Interface is set to Disable: Untagged packets are forwarded without any change. In the downlink, the VLAN tag of packets received with a VLAN tag is removed before forwarding to the wireless link.If VLAN Interface is set to Enable: In the downlink, the VLAN tag of packets received with a VLAN tag is removed before forwarding to the wireless link. For IP CS Service Interface, in the uplink a VLAN tag is added, using the values defined by the VLAN ID and VLAN Priority parameters. If the VLAN ID is set to None (untagged), this is practically the same as setting the VLAN Interface to Disable.NOTEIn the current release only IP CS is supported.NOTEOnly one Service Interface without VLAN is allowed. A Service Interface without VLAN is either one with VLAN Interface set to Disable or one with Service Interface set to Enable and VLAN ID set to None.

Chapter 4 - Operation and Administration ASN-GW MenuBreezeMAX Extreme 118 System Manual4.6.2.9.6 VLAN IDIn IP CS applicable only if VLAN Interface is set to Enable. This is the VLAN ID to be inserted in packets forwarded to the network (uplink).The available range is 1-4094 or null (null means untagged).4.6.2.9.7 VLAN PriorityIn IP CS applicable only if VLAN ID is other than None (untagged). The VLAN Priority to be inserted in packets forwarded to the network (uplink).The available range is from 0 to 7.4.6.2.9.8 Inner DSCP MarkingThe Inner DSCP Marking parameter defines whether to replace in the uplink the original DSCP value in IP packets with a new value specified by the Inner DSCP parameter.The options are Disable (no change in DSCP values) or Enable.4.6.2.9.9 Inner DSCPThe Inner DSCP parameter is applicable only if Inner DSCP Marking is set to Enable. It specifies the DSCP value that will replace in IP packets the original value in the uplink.The range is from 0 to 63.4.6.2.10 Forwarding RulesThe Forwarding Rule includes the features that affect the wireless broadcast domain. The Forwarding Rule menu enables viewing all Forwarding Rules in the database, defining new Forwarding Rules, editing details of existing Forwarding Rules and removing Forwarding Rules from the database.Up to 10 different Forwarding Rules can be defined.Each Forwarding Rule includes the following parameters:4.6.2.10.1 Forwarding Rule IDThis is an auto-sequential number from 1 to a maximum of 10, generated automatically during creation of a new Forwarding Rule.NOTEAny VLAN ID (including None for untagged) can be defined only in a single Service Interface: This includes the values configured for the VLAN ID parameter and valuess in VLAN Lists. The Management VLAN cannot be configured.

Chapter 4 - Operation and Administration ASN-GW MenuBreezeMAX Extreme 119 System Manual4.6.2.10.2 Forwarding Rule NameThe Name of the Forwarding Rule. A unique string of 1 to 32 characters.4.6.2.10.3 Relay ModeThe Relay Mode parameter determines whether the unit performs relaying of messages in the wireless link. When the Relay Mode parameter is enabled, packets originating from devices on the wireless link are transmitted by the unit back to the wireless link to other relevant device(s) that use the same Forwarding Rule, as well as to the backbone. If disabled, these packets are sent only to the backbone and are not sent back to the wireless link.4.6.2.10.4 Unknown Address Forwarding ModeThe Unknown Address Forwarding Mode parameter determines the mode of controlling the flow of information from the backbone to the wireless media. Select from the following options:1 - Forward: Enables the transmission of all packets, except unicast packets sent to addresses that the unit recognizes as being on its wired backbone side. 2 - Discard: The unit will transmit unicast packets only to those addresses that it knows to exist on the wireless link side.4.6.2.10.5 QoS TypeThe QoS Type parameter determines the QoS type to be used for multicast and broadcast messages.The availability/range of the following parameters depend on the selected QoS Type:4.6.2.10.6 CPThe Committed Priority.In the current release, only a value of 0 is supported for BE QoS Profiles. For NRT QoS Profiles the supported range is from 1 (the default) to 2.The CP parameter affects the Committed Time (CT) for BE and NRT QoS Profiles:NOTEIn the current release only BE and NRT QoS Types are supported. For BE QoS Profiles only a a value of 0 is supported for the CP parameters. For NRT QoS Profiles only values of 1 or 2 are supported for the CP parameter.

Chapter 4 - Operation and Administration ASN-GW MenuBreezeMAX Extreme 120 System ManualThe maximum tolerated jitter for BE and NRT QoS is set to 10ms.4.6.2.10.7 QoS ParametersThe availability of specific QoS parameters depend on the selected QoS Type as follows:4.6.2.10.7.1 CIRCIR is the minimum information transfer rate that the system is committed to transfer under normal conditions (minimum reserved traffic rate). The rate is averaged over a minimum increment of time, which is defined by the CT parameter.The range is from 32 to 54,000 Kbps.CIR is applicable for NRT QoS.4.6.2.10.7.2 MIRMIR is the maximum information rate that the system will allow for the connection (maximum sustained traffic rate). The rate is averaged over a minimum increment of time, which is defined by the CT parameter.The range is from 32 to 54,000 Kbps.MIR is applicable for BE and NRT QoS. In NRT QoS MIR cannot be lower than CIR.Table 4-10: Committed Time for BE and NRT QoSCP (Committed Priority) CT (Committed Time)0 200ms1 100ms250msTable 4-11: QoS ParametersQoS Type QoS ParametersBE MIRNRT CIR, MIR

Chapter 4 - Operation and Administration Sector MenuBreezeMAX Extreme 121 System Manual4.7 Sector MenuAccording to the capabilities supported by the hardware and (if applicable) the selected Operation Mode, the unit supports one or two sectors. The Sector menu enables viewing the current and configured parameters of each sector supported by the unit and modifying these parameters.The Sector menu includes the following options:Show Summary: Select this option to view all relevant parameters of the supported Sector(s).Select: Use this option to select the viewing and configuration mode for a specific Sector.4.7.1 Show SummarySelect this option to view all relevant parameters of the supported Sector(s). For each of the supported Sectors the following details are displayed:BTS Operation Mode (for more details see “Operation Mode” on page 75)Sector ID (In the current release only Sector 1 is applicable)Sector General Parameters (for more details see Section 4.7.2.2 below)Sector NameSector LocationSector Heading (degrees)Current Bandwidth (MHz)Configured Bandwidth (MHz)Current Frequency (MHz)NOTEIn the current release only configurations with a single Sector (Sector 1) are supported.

Chapter 4 - Operation and Administration Sector MenuBreezeMAX Extreme 122 System ManualConfigured Frequency (MHz)Current TX Power (dBm)Configured TX Power (dBm)Sector Antenna's Associations According to the Operation Mode, the Sector can be associated with either one or two Antennas. The details displayed for each Antenna associated with the Sector are:Antenna IDAntenna Gain (dBi)Beam Width (degrees)Antenna PolarizationAntenna TypeSector BS's & Radio Channel's Association The number of associated BSs/Radio Channels depend on the Operation Mode. The details displayed for each Radio Channel associated with the Sector are:BS IndexRadio Channel IDBS IDBS NameSupported Frequency Range (according to the details in the Frequency File for the Frequency Band supported by the unit):Frequency Band IDNOTEIn the current release the Sector is associated with one BS (BS1) and one or two Radio Channels.

Chapter 4 - Operation and Administration Sector MenuBreezeMAX Extreme 123 System ManualFrequency Band NameDownlink Start Frequency (MHz)Downlink Stop Frequency (MHz)Frequency Resolution (KHz)Low Tx Power (dBm)High Tx Power (dBm)DFS General Parameters (if applicable)DFS TypeCurrent DFS SupportConfigured DFS SupportCurrent Channel Availability Check Time (sec)Configured Channel Availability Check Time (sec)Current Channel Non Occupancy Period (min)Configured Channel Non Occupancy Period (min)Current Startup Test Valid Period (hours)Configured Startup Test Valid Period (hours)Current Radar Detection Threshold (dBm)Current Radar Detection Threshold (dBm)The DFS Parameters are applicable only for units operating in the 5 GHz bands using a Band Name where DFS is supported. For details on these parameters refer to “DFS” on page 128.Usable Frequencies (if applicable)

Chapter 4 - Operation and Administration Sector MenuBreezeMAX Extreme 124 System ManualA list of frequencies for the DFS algorithm. Applicable only for units operating in the 5 GHz bands using a Band Name where DFS is supported. For details refer to “Usable Frequencies” on page 132.4.7.2 SelectUse this option to select the viewing and configuration mode for a specific Sector. The following options are available for the selected Sector:4.7.2.1 ShowSelect this option to view the relevant parameters. The displayed information is the same as described in Show Summary (Section 4.7.1) above.4.7.2.2 ConfigurationThe Configuration menu includes the following options:General ParametersDFS4.7.2.2.1 General ParametersThe General Parameters menu enables configuration of the following parameters:4.7.2.2.1.1 Sector NameAn optional descriptive parameter. A string of up to 32 printable characters.The default is null. 4.7.2.2.1.2 Sector LocationAn optional descriptive parameter. A string of up to 64 printable characters.The default is null (an empty string). 4.7.2.2.1.3 Sector Heading (degrees)A descriptive parameter indicating the sector’s heading in degrees. A number from 0 to 359.The default is 0. 4.7.2.2.1.4 BandwidthThe bandwidth of the sector in MHz.In the current release the supported options are 5* MHz and 10 MHz.* In the current release the 5 MHz option is not available in units using 5.4/5.8 GHz ETSI and 5.4/5.8 GHz FCC Band Names.

Chapter 4 - Operation and Administration Sector MenuBreezeMAX Extreme 125 System ManualThe default Bandwidth is 10 MHz.4.7.2.2.1.5 FrequencyThe central frequency of the sector in MHz. The available range and default depend on the frequency band supported by the hardware and the selected Band Name (5 GHz units) and the selected bandwidth.The configurable frequencies are from the Minimum Frequency + 1/2 Bandwidth up to a maximum of the Maximum Frequency - 1/2 Bandwidth.The resolution for 3.5 GHz units is 0.125 MHz.In 5 GHz units, the frequency resolution is half the selected bandwidth: 2.5 MHz for a bandwidth of 5 MHz, 5 MHz for a bandwidth of 10 MHz.In the current release the available bandwidths, ranges and defaults are:Table 4-12: Frequency Configuration, 3.5 GHz UnitsBand Name Frequency Range Default Frequency 3.5 GHz 3400-3600 MHz 3405 MHzTable 4-13: Frequency Configuration, 4.9 GHz UnitsBand Name Frequency Range Default Frequency 4.9 GHz Universal 4900-5470 MHz 4905 MHz4.9 GHz Brazil FCC 4940-4990 MHz 4945 MHz4.9 GHz Japan1 4920-5000 MHz 4925 MHz4.9 GHz Japan 2 5030-5091 MHz 5035 MHz5.1-5.3 GHz ETSI 5150-5350 MHz 5155 MHz5.3 GHz ETSI 5250-5350 MHz 5255 MHz5.2 GHz ETSI 5150-5250 MHz 5155 MHz5.2 GHz FCC 5150-5250 MHz 5155 MHz5.3 GHz FCC 5250-5350 MHz 5255 MHz5.1-5.3 GHz FCC 5150-5350 MHz 5155 MHz5.1 GHz FAAA 5090-5150 MHz 5095 MHzTable 4-14: Frequency Configuration, 5.4 GHz UnitsBand Name Frequency Range Default Frequency 5.4 GHz Universal 5470-5900 MHz* 5475 MHz

Chapter 4 - Operation and Administration Sector MenuBreezeMAX Extreme 126 System Manual* The frequency 5725 MHz is illegal and cannot be used.4.7.2.2.1.6 Tx PowerThe sector’s Tx Power in dBm. The configuration range is from 0 to 50 dBm using a 1 dB resolution. In 3.5 GHz units the actually available range (using 1 dB resolution) and default are:In 4.9 GHz and 5.4 GHz units the HW supports a Tx Power range of 0 to 2*1 dBm (* in the current release, in units using 5.9 GHz Universal Band Name the maximum supported Tx Power is 20 dBm). However, in units using certain Band Names the actually available Tx Power range depends also on the maximum allowed EIRP according to relevant regulations and on the configured Bandwidth and Antenna Gain:5.9 GHz Universal 5900-5950 MHz 5905 MHz5.4 GHz ETSI 5470-5725 MHz 5475 MHz5.8 GHz ETSI 5725-5875 MHz 5730 MHz5.4 GHz FCC 5470-5725 MHz 5475 MHz5.8 GHz FCC 5725-5875 MHz 5730 MHz5.4 - 5.8 GHz ETSI 5470-5875 MHz* 5475 MHz5.4 - 5.8 GHz FCC 5470-5875 MHz* 5475 MHzTable 4-15: Sector Tx Power, 3.5 GHz UnitsBand Tx Power Range (dBm) Default (dBm) 3.5 GHz 21-30 30Table 4-16: Maximum Allowed EIRP, 4.9 GHz UnitsBand Name Maximum EIRP (dBm)5 MHz BW 10 MHz BW4.9 GHz Universal No Limit No Limit4.9 GHz Brazil FCC No Limit No Limit4.9 GHz Japan 1 34 344.9 GHz Japan 2 34 345.1-5.3 GHz ETSI 20 235.3 GHz ETSI 20 23Table 4-14: Frequency Configuration, 5.4 GHz UnitsBand Name Frequency Range Default Frequency

Chapter 4 - Operation and Administration Sector MenuBreezeMAX Extreme 127 System Manual* In the current release the 5 MHz option is not available in units using 5.4/5.8 GHz ETSI and 5.4/5.8 GHz FCC Band Names.In 4.9 GHz and 5.4 GHz units, the actual maximum Tx Power is the lower of the following values:The maximum supported by the HW (21 dBm)Maximum Allowed EIRP (according to the Configured Bandwidth) - the Configured Antenna Gain.The default is the highest value that can actually be supported for the relevant Band Name (using the Gain of the installed Integral Antenna or the default value of 14 dBi for an External Antenna).5.2 GHz ETSI 27 305.2 GHz FCC 27 305.3 GHz FCC 27 305.1-5.3 GHz FCC 27 305.1 GHz FAAA No Limit No LimitTable 4-17: Maximum Allowed EIRP, 5.4 GHz UnitsBand Name Maximum EIRP (dBm)5 MHz BW 10 MHz BW5.4 GHz Universal No Limit No Limit5.9 GHz Universal No Limit No Limit5.4 GHz ETSI NA* 305.8 GHz ETSI NA* 335.4 GHz FCC NA* 365.8 GHz FCC NA* 365.4 - 5.8 GHz ETSI 30 335.4 - 5.8 GHz FCC 33 36Table 4-16: Maximum Allowed EIRP, 4.9 GHz UnitsBand Name Maximum EIRP (dBm)5 MHz BW 10 MHz BW

Chapter 4 - Operation and Administration Sector MenuBreezeMAX Extreme 128 System Manual4.7.2.2.2 DFSThe DFS parameters submenu is applicable only for units operating in the 5 GHz bands using a Band Name where DFS is not Required.In certain regions there are weather radar systems operating in the 5 GHz band. Applicable regulations dictates that wireless access systems operating in these bands shall not interfere with the operation of the radar systems. This means that the wireless access system must be able to automatically detect the presence of radar signals and avoid transmissions on frequencies used by radar systems in its vicinity.The Dynamic Frequency Selection (DFS) mechanism is based on periodical tests of the frequency being used and automatic switching to a radar-free frequency upon detection of radar activity on the current frequency. The test for radar activity is performed according to the applicable standards (ETSI or FCC, according to the selected DFS Type (see “DFS Type” on page 79).Before initiating transmission on a new frequency that is not defined as Available (at start-up after power up or reset none of the frequencies are defined as Available) the unit performs a Channel Availability Check to ensure that there is no radar operating on this frequency. During normal operation, the unit continues monitoring the operating frequency (In-Service Monitoring) to ensure that there is no radar operating on the frequency. After deciding that a frequency is Available, it is considered as an Available frequency for a period defined by the configurable Startup Test Valid Period parameter.Upon detection of radar activity on the operating frequency, the unit will automatically stop transmissions on this frequency that will be marked as Unavailable (Radar Detected) channel. The unit may continue transmissions on this frequency for a very limited period, allowing it to complete some transmissions of data and send control and management signals to support the transition of the served devices to a new channel. The frequency on which radar was detected will be considered as Unavailable for a period defined by the configurable Channel Non Occupancy Period parameter. The unit will switch NOTEFor units using the 5.4 GHz ETSI and 5.4-5.8 GHz ETSI Band Name: For compliance with ETSI regulations, the Channel Availability Check Time (see “Channel Availability Check Time (sec)” on page 131) for frequencies in the range from to 5600 to 5650 MHz is set to 600 seconds (10 minutes), regardless of the value configured for this parameter.For units using the 5.8 GHz ETSI, 5.4-5.8 GHz ETSI, 5.8 GHz FCC and 5.4-5.8 GHz FCC Band Name: DFS is not required by the relevant ETSI/FCC regulations for frequencies in the range from 5850 to 5875 MHz. These means that frequencies in this range included in the Usable Frequencies List are always considered as Available.

Chapter 4 - Operation and Administration Sector MenuBreezeMAX Extreme 129 System Manualrandomly to another frequency in the Usable Frequencies List that is not considered as Unavailable. If this frequency is not considered as Available, the unit will check for radar activity before initiating transmissions on the new frequency. In configurations with two sectors, when the Frequencies Management Level (see “Frequencies Management Level” on page 80) is set to BTS Level, the frequencies table of each sector uses also the status information of relevant frequencies in the frequencies table of the other sector.The DFS Menu includes the following options:ShowShow Frequencies Status TableUpdate General ParametersUsable Frequencies4.7.2.2.2.1 Show Select this option to display the following:DFS Type: According to the DFS type defined in the Band Name (see “DFS” on page 79).Current DFS SupportConfigured DFS SupportCurrent Channel Availability Check Time (sec)Configured Channel Availability Check Time (sec)Current Channel Non Occupancy Period (min)Configured Channel Non Occupancy Period (min)Current Startup Test Valid Period (hours)Configured Startup Test Valid Period (hours)Current Radar Detection Threshold (dBm)

Chapter 4 - Operation and Administration Sector MenuBreezeMAX Extreme 130 System ManualCurrent Radar Detection Threshold (dBm)Rx Antenna Gain (dBi): The value configured for the Antenna associated with the relevant Sector.Bandwidth (MHz): The current Bandwidth of the Sector.Tx Power (dBm): The current Tx {power of the Sector.Frequencies List: The current list of frequencies configured for the DFS mechanism4.7.2.2.2.2 Show Frequencies Status TableThe DFS Frequencies Status table provides status details for each of the relevant frequencies (see “Usable Frequencies” on page 132). The details provided for each entry are:Frequency (MHz).Detected Time: The last date and time at which the test results indicated a presence of radar activity on this frequency, or N/A if the frequency was not tested since last reset. The frequency is considered as Unavailable for selection by the DFS mechanism if the elapsed time since the Detected Time is not higher than Channel Non Occupancy Period.Last Clear Channel Test: The last date and time at which the test results indicated that there is no radar activity on this frequency, or N/A if the frequency was not tested since last reset. The frequency is considered as Available for selection by the DFS mechanism if the elapsed time since the Last Clear Channel Test is not higher than Startup Test Valid Period.4.7.2.2.2.3 Update General ParametersThe configurable DFS parameters and options are:DFS SupportChannel Availability Check Time (sec)Channel Non Occupancy Period (min)Startup Test Valid Period (hours)

Chapter 4 - Operation and Administration Sector MenuBreezeMAX Extreme 131 System ManualRadar Detection Threshold (dBm)4.7.2.2.2.3.1 DFS SupportThe DFS Support parameter defines whether the DFS mechanism is enabled or disabled. The default is Disable4.7.2.2.2.3.2 Channel Availability Check Time (sec)The Channel Availability Check Time is the minimum time to check a frequency for the presence of radar activity.The range is from 0 to 600 seconds.The default is 60 seconds.4.7.2.2.2.3.3 Channel Non Occupancy Period (min)If radar was detected on a certain frequency, this frequency will be considered as Unavailable for a period defined by the Channel Non Occupancy Period parameter. During this period this frequency will not be used by the DFS mechanism.The range is from 0 to 60 minutes.The default is 30 minutes.4.7.2.2.2.3.4 Startup Test Valid Period (hours)After deciding that a frequency is Available (no radar was detected by the Channel Availability Check algorithm), it is considered as an Available frequency for a period defined by the Startup Test Valid Period parameter. During this period the unit may start transmitting on this frequency without performing a Channel Availability Check.The range is from 0 to 48 hours.The default is 6 hours.CAUTIONIn countries where DFS should be used for compliance with applicable regulations, DFS Support must be enabled..NOTEFor units using the 5.4 GHz ETSI and 5.4-5.8 GHz ETSI Band Name: For compliance with ETSI regulations, the Channel Availability Check Time for frequencies in the range from to 5600 to 5650 MHz is set to 600 seconds (10 minutes), regardless of the value configured for this parameter.

Chapter 4 - Operation and Administration Sector MenuBreezeMAX Extreme 132 System Manual4.7.2.2.2.3.5 Radar Detection Threshold (dBm)The Radar Detection Threshold is the minimum level of received radar signal that must be detected by the algorithm assuming an Rx Antenna gain of 0 dBi. The higher the EIRP, the higher should be the Radar Detection Threshold.The range is from -36 to -70 dBm.The default depends on the EIRP (Tx Power + Antenna Gain) of the Sector:4.7.2.2.2.4 Usable FrequenciesThe Usable Frequencies List can include frequencies to be used for DFS. The subset of usable frequencies list should be defined taking into account the allowed frequencies according to applicable regulations and the requirement for uniform spreading.The Usable Frequency menu includes the following options:Show: To display the current listAdd Frequencies: To add one or several frequencies (in MHz) to the list. Multiple entries are separated by semi-colon (;).Delete Frequencies: To delete one or several frequencies (in MHz) from the list. Multiple entries are separated by semi-colon (;).Delete Entire List: To clear the list.Table 4-18: Radar Detection Threshold DefaultsEIRP (dBm) Radar Detection Threshold (dBm)>30 -6723-30 -64<23 -62NOTEFor units using the 5.8 GHz ETSI, 5.4-5.8 GHz ETSI, 5.8 GHz FCC and 5.4-5.8 GHz FCC Band Name: DFS is not required by the relevant ETSI/FCC regulations for frequencies in the range from 5850 to 5875 MHz. These means that frequencies in this range included in the Usable Frequencies List are always considered as Available.

Chapter 4 - Operation and Administration BS MenuBreezeMAX Extreme 133 System Manual4.8 BS MenuAccording to the capabilities supported by the hardware one or two BSs. The BS menu enables viewing the current and configured parameters of each BS supported by the unit and modifying these parameters.The BS menu includes the following options:Show Summary: Select this option to view all relevant parameters of the supported BSs(s).Select: Use this option to select the viewing and configuration mode for a specific BS.4.8.1 Show SummarySelect this option to view all relevant parameters of the supported BS(s). For each of the supported BSs the following details are displayed:BS IndexBS ID: A unique identifier of the BS. The BS ID comprises 48 bits displayed in an IP format as x.x.x.x.x.x (x=0-255).The BS ID is calculated as follows:For details on the parameters used for calculating the BS ID refer to:Operator ID: See “Operator ID” on page 75NOTEIn the current release only configurations with a single BS (BS 1) are supported.Table 4-19: BS ID CalculationOperator ID Cell ID Sector ID24 bits 16 bits 8 bits0-255.0-255.0-255 0-255.0-255 0-30-16777215 Service Zone ID(11 bits): 0-2047Cell Number (5 bits): 0-31Segment Number: 0-3

Chapter 4 - Operation and Administration BS MenuBreezeMAX Extreme 134 System ManualService Zone ID: See “Service Zone ID” on page 75Cell Number: See “Cell Number” on page 139Segment Number: See “Segment Number” on page 139BS Name (refer to “BS Name” on page 139)BS PropertiesASIC HW VersionASIC SW VersionMACCurrent Segment NumberConfigured Segment NumberCurrent Cell NumberConfigured Cell NumberCurrent Cell Radius (m)Configured Cell Radius (m)Current Map RepetitionConfigured Map RepetitionMap Compression: Downlink/Uplink (not configurable). Indiction that compression of MAP messages is enabled in both downlink and uplink.Preamble Index: a read only index of the preamble to use. The Preamble Index is calculated by:»For Segment Number 0-3: 3 x (Cell Number) + Segment Number.»For Segment Number 4: 96 + Cell Number.

Chapter 4 - Operation and Administration BS MenuBreezeMAX Extreme 135 System ManualTables 437 & 438 in the standard provide the series to use for each Preamble Index according to FFT size.For details on MAC parameters refer to “MAC” on page 139PHY Current Diversity ModeConfigured Diversity ModeCurrent UL Thermal Noise levelConfigured UL Thermal Noise levelBandwidth (MHz): The BS Bandwidth depends on the configured Sector Bandwidth and Operation Mode. For Single Sector Single BS (with or without Diversity) Operation Modes the BS Bandwidth equals the Sector Bandwidth (see “Bandwidth” on page 124).For details on PHY parameters refer to “PHY” on page 140Multi RateUL Minimum Sub-ChannelsCurrent Uplink Multi Rate SupportConfigured Uplink Multi Rate SupportCurrent Uplink Basic RateConfigured Uplink Basic RateCurrent Uplink Fade MarginConfigured Uplink Fade MarginCurrent Downlink Multi Rate SupportConfigured Downlink Multi Rate SupportCurrent Downlink Basic Rate

Chapter 4 - Operation and Administration BS MenuBreezeMAX Extreme 136 System ManualConfigured Downlink Basic RateCurrent Downlink Fade MarginConfigured Downlink Fade MarginFor details on Multi Rate parameters refer to “Multi Rate” on page 141ChannelizationCurrent DL Permutation BaseConfigured DL Permutation BaseCurrent DL Permutation Base ValueConfigured DL Permutation Base ValueCurrent UL Permutation BaseConfigured UL Permutation BaseCurrent UL Permutation Base ValueConfigured UL Permutation Base ValueCurrent Major GroupConfigured Major GroupFor details on Channelization parameters refer to “Channelization” on page 145BS Connectivity (applicable only in External ASN-GW Working Mode)Current IP AddressConfigured IP AddressCurrent Subnet MaskConfigured Subnet MaskCurrent Default Gateway

Chapter 4 - Operation and Administration BS MenuBreezeMAX Extreme 137 System ManualConfigured Default GatewayMTU Size (Bytes): In current release MTU Size is not configurable and is set to 1700 bytes.For details on BS Connectivity parameters refer to “Connectivity” on page 147. ASN-GW Connectivity (applicable only in External ASN-GW Working Mode)Current IP AddressConfigured IP AddressCurrent VLAN IDConfigured VLAN IDCurrent VLAN PriorityConfigured VLAN PriorityCurrent DSCPConfigured DSCPASN-GW Operational Status (Up/Down. Presented only if Keep Alive Support is enabled).For details on ASN-GW Connectivity parameters refer to “Connectivity” on page 147.DSCP QoS Marking (applicable only in External ASN-GW Working Mode)NRT DSCP Marking Mode and DSCP ValueBE DSCP Marking Mode and DSCP ValueFor details on DSCP QoS Marking parameters refer to “DSCP QoS Marking” on page 148. VLAN Priority QoS Marking (applicable only in External ASN-GW Working Mode)NRT: VLAN Priority Marking Mode and VLAN Priority Value

Chapter 4 - Operation and Administration BS MenuBreezeMAX Extreme 138 System ManualBE: VLAN Priority Marking Mode and VLAN Priority ValueFor details on VLAN Priority QoS Marking parameters refer to “VLAN Priority QoS Marking” on page 149.BS and ASN-GW Keep Alive (applicable only in External ASN-GW Working Mode)Keep Alive SupportKeep Alive Timer (Seconds)Keep Alive Interval (Seconds)Maximum Number Of Keep Alive FailuresIf Keep Alive Support is disabled, other Keep alive parameters will not be presented. For details on BS and ASN-GW Keep Alive parameters refer to “BS and ASN-GW Keep Alive” on page 151.4.8.2 SelectUse this option to select the viewing and configuration mode for a specific BS. The following options are available for the selected BS:ShowConfigurationPerformance Counters4.8.2.1 ShowSelect this option to view the relevant parameters of the selected BS. The displayed information is the same as described in Show Summary (Section 4.8.1) above.4.8.2.2 ConfigurationSelect this option to view (Show option) or modify (Update option) the following parameters of the BS:General Parameters

Chapter 4 - Operation and Administration BS MenuBreezeMAX Extreme 139 System ManualMACPHYMulti RateChannelizationR6 Interface (applicable only in External ASN-GW Working Mode)4.8.2.2.1 General ParametersThe General Parameters submenu enables viewing/updating the following parameter:4.8.2.2.1.1 BS NameAn optional descriptive parameter. A string of up to 32 printable characters.The default is null (an empty string).4.8.2.2.2 MACThe MAC submenu enables viewing/updating the following parameters:Segment NumberCell NumberCell Radius (m)Map Repetition4.8.2.2.2.1 Segment NumberEach cell can include up to a maximum of 4 sectors. The Segment Number defines the sector number in the cell.The range is from 0 to 3.The default Segment Number is 0.4.8.2.2.2.2 Cell NumberThe Cell Number is the unique identifier of the Cell in the Service Zone. The maximum number of Cells per Service Zone is 32, with a maximum of 18 Cells with 4 sectors.

Chapter 4 - Operation and Administration BS MenuBreezeMAX Extreme 140 System ManualThe range of the Cell Number parameter is from 0 to 31. For Cells with 4 sectors the range is from 0 to 17.The default Cell Number is 0.4.8.2.2.2.3 Cell Radius (m)The maximum cell radius in meters. This is the distance from the BTS of the farthest MS that it can serve.The range is from 8000 to 40000 meter.In the current release only Cell Radius values of 8000 and 40000 are supported.The default Cell Radius is 40000 (m).4.8.2.2.2.4 Map RepetitionThe number of repetitions to use for transmitting DL MAP, UL Map, UCD (Uplink Channel Descriptor), DCD (Downlink Channel Descriptor), and DIUC (Downlink Interval Usage Code) messages.The available values are 1, 2, 4.The default value is 1.4.8.2.2.3 PHYThe PHY submenu includes the following options:Show: Select this option to view the relevant PHY parameters of the selected BS. The displayed information is the same as described in the PHY section of Show Summary (Section 4.8.1).Perform and Show UL Thermal Noise Measurement: Select this option to perform uplink thermal noise measurement. The measurement is performed by scheduling an empty uplink frame and extrapolating from the power measured on this frame the average noise and interference (NI) level per subcarrier. The measurement assumes that the NI level is constant across the whole bandwidth, and it is performed on an empty uplink frame to avoid taking into account the interference generated by the MS. The test takes about one minute, and at the end the measured NI is displayed. The measured NI is used for configuring the UL Thermal Noise Level parameter (see below). Note that during the test the available throughput is affected because of the allocation of empty uplink frames.

Chapter 4 - Operation and Administration BS MenuBreezeMAX Extreme 141 System ManualUpdate: Select this option to update the configured values of the following parameters:»Diversity»UL Thermal Noise Level (dBm)4.8.2.2.3.1 DiversityIn the current release the supported diversity modes are:SISO (Single Input Single Output): This is the only mode that can be used by units using No Diversity operation mode.MIMO Matrix A: Supported by units using Diversity operation mode.4.8.2.2.3.2 UL Thermal Noise Level (dBm)This parameter defines the target noise level to be used for calculating uplink CINR values that are necessary for various functions such as the power control mechanism. The BS broadcasts the targeted UL Thermal Noise Level level that is used by the MSs in open loop power control mode. Increasing the advertised NI causes the MS to transmit more power to support the same modulation. The NI value is typically set 6 dB higher than thermal noise (NI) that is measured in this test.The range is from -130 to -100 dBm.The default is -128 dBm.4.8.2.2.4 Multi RateThe system employs a multirate algorithm to dynamically adapt the modulation scheme and Forward Error Correction (FEC) coding to actual link conditions. The algorithm is managed by the BS taking into account also information received from the served MSs. Optimal values are calculated separately for the uplink and downlink for each MS. MAP messages transmitted to the MSs include information on the uplink rate that should be used by each MS for its next transmission.The multirate algorithm optimizes the trade-off between capacity and error rate: In most deployments, most of the links use high order modulation most of the time, maximizing capacity. “Bad” links use lower order modulation, maximizing CAUTIONA correct value of this parameter is critical for proper performance of the system. Do not change it from the default value unless advised to modify it by Alvarion’s experts.

Chapter 4 - Operation and Administration BS MenuBreezeMAX Extreme 142 System Manualavailability. The algorithm provides independent adaptation per MS, and it is performed independently for UL and DL, based on link quality information. The algorithm provides dynamic adaptation - modulation can be changed on a per burst basis. The Multi Rate submenu enables viewing/updating the following parameters:Uplink Multi Rate SupportUplink Basic RateUplink Fade MarginDownlink Multi Rate SupportDownlink Basic RateDownlink Fade Margin4.8.2.2.4.1 UL Minimum Sub-ChannelsThe minimum number of sub-channels to be used by the uplink rate adaptation mechanism. At each rate, the mechanism will move from the highest supported number of sub-channels (35 for 10 MHz bandwidth, 17 for 5 MHz bandwidth) down to the value of this parameter before reaching a decision to switch to a lower rate. In the other direction, the mechanism will start at this value and move up to the highest supported number of sub-channels before reaching a decision to switch to a higher rate.The range is from 1 to 17 for a 5 MHz bandwidth and from 1 to 35 for a 10 MHz bandwidth.The default is 4 sub-channels.4.8.2.2.4.2 Uplink Multi Rate SupportDefines whether the multi rate algorithm will be used in the uplink. Under normal operating conditions the Uplink Multi Rate Support should always be enabled.The option to disable it is provided primarily for testing purposes.The default is Enable. 4.8.2.2.4.3 Uplink Basic RateWhen Uplink Multi Rate Support is enabled, the Uplink Basic Rate defines the lowest rate that can be used by the multi rate algorithm in the uplink. MSs that

Chapter 4 - Operation and Administration BS MenuBreezeMAX Extreme 143 System Manualcannot communicate with the BS at this rate will not be served. This can be used to deny service to MSs with very poor link conditions, thus improving the overall capacity.When Uplink Multi Rate Support is disabled, this is the fixed rate at which the BS will communicate with all MSs it can serve.The available options are:QPSK-CTC-1/2 REP4QPSK-CTC-1/2 REP2QPSK-CTC-1/2QPSK-CTC-3/4QAM16-CTC-1/2QAM16-CTC-3/4QAM64-CTC-2/3QAM64-CTC-3/4QAM64-CTC-5/6The default rate is QPSK-CTC-1/2.4.8.2.2.4.4 Uplink Fade MarginThe system uses hard-coded SNR thresholds for rate-adaptation decisions according to the Diversity Mode. The Uplink Fade Margin is added to the uplink thresholds, thus enabling to change the actual thresholds used by the uplink multirate algorithm (“reducing” the sensitivity according to the radio planning).The range is from 0 to 15 dB.The default is 2 dB.4.8.2.2.4.5 Downlink Multi Rate SupportDefines whether the multi rate algorithm will be used in the downlink. Under normal operating conditions the Downlink Multi Rate Support should always be enabled. The option to disable it is provided primarily for testing purposes.The default is Enable.

Chapter 4 - Operation and Administration BS MenuBreezeMAX Extreme 144 System Manual4.8.2.2.4.6 Downlink Basic RateWhen Downlink Multi Rate Support is enabled, the Downlink Basic Rate defines the lowest rate that can be used by the multi rate algorithm in the downlink. MSs that cannot communicate with the BS at this rate will not be served. This can be used to deny service to MSs with very poor link conditions, thus improving the overall capacity.When Downlink Multi Rate Support is disabled, this is the fixed rate at which the BS will communicate with all MSs it can serve.The available options are:QPSK-CTC-1/2 REP4QPSK-CTC-1/2 REP2QPSK-CTC-1/2QPSK-CTC-3/4QAM16-CTC-1/2QAM16-CTC-3/4QAM64-CTC-2/3QAM64-CTC-3/4QAM64-CTC-5/6The default rate is QPSK-CTC-1/2.4.8.2.2.4.7 Downlink Fade MarginThe system uses hard-coded SNR thresholds for rate-adaptation decisions according to the Diversity Mode. The Downlink Fade Margin is added to the downlink thresholds, thus enabling to change the actual thresholds used by the downlink multirate algorithm (“reducing” the sensitivity according to the radio planning).The range is from 0 to 15 dB.The default is 2 dB.

Chapter 4 - Operation and Administration BS MenuBreezeMAX Extreme 145 System Manual4.8.2.2.5 ChannelizationThe Channelization submenu enables viewing/updating the following parameters:DL Permutation BaseDL Permutation Base ValueUL Permutation BaseUL Permutation Base ValueMajor Group4.8.2.2.5.1 DL Permutation BaseThe method for configuring/calculating the permutation base used for downlink sub-channelization. The available options are Fix, Variable and Rotated.Fix: The permutation base is defined by the DL Permutation Base Value parameter (see below).Variable: The formula is (4*Cell number + Segment number) modulu 32.Rotated: The formula starts with (4*Cell number + Segment number) modulu 32 (the same as for Variable), incremented by 1 (modulu 32) each frame.The default is Fix.In the current release only the Fix option is supported.4.8.2.2.5.2 DL Permutation Base ValueThe value of the downlink permutation base for Fix DL Permutation Base.The range is from 0 to 31.The default is 0.4.8.2.2.5.3 UL Permutation BaseThe method for configuring/calculating the permutation base used for uplink sub-channelization. The available options are Fix, Variable and Rotated.

Chapter 4 - Operation and Administration BS MenuBreezeMAX Extreme 146 System ManualFix: The permutation base is defined by the UL Permutation Base Value parameter (see below).Variable: The permutation base depends on the calculated Preamble Index as follows:Rotated: Starts with the same value as calculated for Variable, incremented by 1 (modulu 70) each frame.The default is Fix.In the current release only the Fix option is supported.4.8.2.2.5.4 UL Permutation Base ValueThe value of the uplink permutation base for Fix UL Permutation Base.The range is from 0 to 69.The default is 0.4.8.2.2.5.5 Major GroupThe subchannelization major groups to be used.A number from 0 to 63 representing the bit map of major groups 0 to 5. A bit is set if the applicable major group is selected. The supported combinations depend on the bandwidth: For BS Bandwidth of 5MHz major group can be 0, 2, 4 or any combination of 0 and 2 or 0 and 4 or 2 and 4. For BS Bandwidth of 10MHz major groups can be 0,1 or 2,3 or 4,5 or 0,1 and 2,3 or 2,3 and 4,5 or 0,1 and 4,5 or 0,1,2,3,4,5.The default for bandwidth of 10 MHz is 63 (all major groups selected). The default for bandwidth of 5 MHz is 21 (major groups 0, 2 and 4 selected).In the current release only the default value (63) is supported.Table 4-20: Variable UL Permutation Base CalculationCalculated Preamble Index UL Permutation Base0-69 = Preamble Index70-95 = Preamble Index-7096-111 = Preamble Index-42112-113 = Preamble Index-112

Chapter 4 - Operation and Administration BS MenuBreezeMAX Extreme 147 System Manual4.8.2.2.6 R6 InterfaceThe R6 Interface menu enables viewing/modifying the parameters of the R6 tunnel between the BS and an external ASN-GW. The R6 Interface menu is applicable only in External ASN-GW Working Mode. The R6 Parameters menu includes the following sub-menus:ConnectivityDSCP QoS MarkingVLAN Priority QoS MarkingBS and ASN-GW Keep Alive4.8.2.2.6.1 ConnectivityThe BS Connectivity submenu enables viewing/configuring the following parameters that affect communication over the R6 tunnel with an external ASN-GW:BS IP AddressBS Subnet MaskBS Default GatewayMTU SizeASN-GW IP AddressASN-GW Default VLAN IDASN-GW Default VLAN PriorityASN-GW DSCP4.8.2.2.6.1.1 BS IP AddressThe Bearer Interface IP address used for communication with the external ASN-GW.4.8.2.2.6.1.2 BS Subnet MaskThe subnet mask of the Bearer Interface IP address.

Chapter 4 - Operation and Administration BS MenuBreezeMAX Extreme 148 System Manual4.8.2.2.6.1.3 BS Default GatewayThe default gateway IP address for the Bearer Interface. The BS Default Gateway must be in the subnet of the BS IP Address.4.8.2.2.6.1.4 MTU SizeThe maximum MTU size in Bytes. In the current release this parameter is not configurable and is set to 1700 bytes.4.8.2.2.6.1.5 ASN-GW IP AddressThe IP address of the external ASN-GW. The ASN-GW IP Address must be in the subnet of the BS IP Address.4.8.2.2.6.1.6 ASN-GW Default VLAN IDThe default VLAN ID to be used in communication with the external ASN-GW.The range is from 1 to 4094 or 4096 for None (untagged).The default is 4096 (None).4.8.2.2.6.1.7 ASN-GW Default VLAN PriorityApplicable only if the ASN-GW VLAN ID is other than None (4096). The default VLAN Priority to be used in communication with the external ASN-GW.The range is from 0 to 7.4.8.2.2.6.1.8 ASN-GW DSCPThe DSCP value to be used in communication with the external ASN-GW.The range is from 0 to 63.The default is 0.4.8.2.2.6.2 DSCP QoS MarkingThe DSCP QoS Marking submenu enables viewing/updating the following parameters per QoS type:4.8.2.2.6.2.1 NRT DSCP Marking ModeThe NRT DSCP Marking Mode define how to handle the outer DSCP marking of the GRE tunnel for NRT traffic. If set to Marking, a configurable DSCP value will be added at uplink direction and removed at downlink direction together with the GRE tunnel.NOTEIn the current release only NRT and BE QoS are supported.

Chapter 4 - Operation and Administration BS MenuBreezeMAX Extreme 149 System ManualIf set to Transparent, the value of the inner DSCP will be used also as the outer DSCP in the uplink direction. No specific action is required at downlink direction assuming that the inner DSCP is assigned properly.The following Value parameter is applicable only if NRT DSCP Marking Mode is set to Marking.The default is Transparent.4.8.2.2.6.2.2 NRT DSCP ValueApplicable only if NRT DSCP Marking Mode is set to Marking. The DSCP value to be applied in the uplink to packets in NRT connections.A value in the range from 0 to 63.The default is 0.4.8.2.2.6.2.3 BE DSCP Marking ModeThe BE DSCP Marking Mode define how to handle the outer DSCP marking of the GRE tunnel for BE traffic. If set to Marking, a configurable DSCP value will be added at uplink direction and removed at downlink direction together with the GRE tunnel.If set to Transparent, the value of the inner DSCP will be used also as the outer DSCP in the uplink direction. No specific action is required at downlink direction assuming that the inner DSCP is assigned properly.The following Value parameter is applicable only if BE DSCP Marking Mode is set to Marking.The default is Transparent.4.8.2.2.6.2.4 BE DSCP ValueApplicable only if BE DSCP Marking Mode is set to Marking. The DSCP value to be applied in the uplink to packets in BE connections.A value in the range from 0 to 63.The default is 0.4.8.2.2.6.3 VLAN Priority QoS MarkingThe VLAN Priority QoS Marking submenu is not applicable if the ASN-GW Default VLAN ID (see “ASN-GW Default VLAN ID” on page 148) is set to None (untagged). The submenu enables viewing/updating the following parameters per QoS type:

Chapter 4 - Operation and Administration BS MenuBreezeMAX Extreme 150 System Manual4.8.2.2.6.3.1 NRT VLAN Priority Marking ModeThe NRT VLAN Priority Marking Mode define how to handle the outer VLAN Priority marking of the GRE tunnel for NRT traffic.If set to Marking, a configurable VLAN Priority value will be added at uplink direction and removed at downlink direction together with the GRE tunnel.If set to None Specific, then the ASN-GW Default VLAN Priority (see “ASN-GW Default VLAN Priority” on page 148) will be used for all QoS types.If set to Transparent, the value of the inner VLAN Priority will be used also as the outer VLAN parameters in the uplink direction. No specific action is required at downlink direction assuming that the inner VLAN is assigned properly.The following Value parameters are applicable only if NRT VLAN Priority Marking Mode is set to Marking.The default is None Specific.4.8.2.2.6.3.2 NRT VLAN Priority ValueApplicable only if NRT VLAN Priority Marking Mode is set to Marking. Enables configuration of the outer VLAN Priority to be applied in the uplink to packets in NRT connections.A value in the range 0 to 7. The default is 0.4.8.2.2.6.3.3 BE VLAN Priority Marking ModeThe BE VLAN Priority Marking Mode define how to handle the outer VLAN Priority marking of the GRE tunnel for BE traffic.If set to Marking, a configurable VLAN Priority value will be added at uplink direction and removed at downlink direction together with the GRE tunnel.If set to None Specific, then the ASN-GW Default VLAN Priority (see “ASN-GW Default VLAN Priority” on page 148) will be used for all QoS types.If set to Transparent, the value of the inner VLAN Priority will be used also as the outer VLAN parameters in the uplink direction. No specific action is required at downlink direction assuming that the inner VLAN is assigned properly.NOTEIn the current release only NRT and BE QoS are supported.NOTEIn the current release the Transparent option is not supported.

Chapter 4 - Operation and Administration BS MenuBreezeMAX Extreme 151 System ManualThe following Value parameters are applicable only if BE VLAN Priority Marking Mode is set to Marking.The default is None Specific.4.8.2.2.6.3.4 BE VLAN Priority ValueApplicable only if VLAN Priority Marking Mode is set to Marking. Enables configuration of the outer VLAN Priority to be applied in the uplink to packets in BE connections.A value in the range 0 to 7. The default is 0.4.8.2.2.6.4 BS and ASN-GW Keep AliveThe BS and ASN-GW Keep Alive submenu enables viewing/updating the parameters of the keep-alive mechanism between the BS and the external ASN-GW:4.8.2.2.6.4.1 Keep Alive SupportThe Keep Alive Support parameter defines whether the keep alive mechanism is disabled or enabled.The default is Disable.If Keep Alive Support is set to Disable the following parameters are not applicable and are not presented.4.8.2.2.6.4.2 Keep Alive Timer (Seconds)The Keep Alive Timer parameter defines the time between PING transmissions to the ASN-GW. The range is from 60 to 180 seconds. The default is 60 seconds.4.8.2.2.6.4.3 Keep Alive Interval (Seconds)The Keep Alive Interval defines the time to wait for a keep-alive response from the ASN-GW.The range is from 1 to 30 seconds. The default is 5 seconds.4.8.2.2.6.4.4 Maximum Number of Keep Alive FailuresThe Maximum Number of Keep Alive Failures defines the maximum number of keep-alive failures before reaching a decision that the ASN-GW is not reachable.The range is from 1 to 10. The default is 3.NOTEIn the current release the Transparent option is not supported.

Chapter 4 - Operation and Administration BS MenuBreezeMAX Extreme 152 System Manual4.8.2.3 Performance CountersThe Performance Counters menu enables showing or resetting the following BS Wireless counters:UL Received Packets: The total number of packets received by the BS.UL Received Bytes: The total number of bytes received by the BS.UL Discarded Packets: The total number of packets received by the BS that were discarded.DL Transmitted Packets: The total number of packets transmitted by the BS.DL Transmitted Bytes: The total number of bytes transmitted by the BS.DL Discarded Packets: The total number of packets intended for transmission by the BS that were discarded before transmission.

Chapter 4 - Operation and Administration Radio Channel MenuBreezeMAX Extreme 153 System Manual4.9 Radio Channel MenuEach BS has two Radio Channels. In configurations using Operation Mode with no Diversity only one Radio Channel is used. In configurations using Operation Mode with Diversity two Radio Channel are used.The Radio Channel menu includes the following options:Show Summary: Select this option to view all relevant parameters of the available Radio Channel(s).Select: Use this option to select the viewing and configuration mode for a specific Radio Channel.4.9.1 Show SummarySelect this option to view all relevant parameters of the available Radio Channel(s). For each of the Radio Channels the following details are displayed:Radio Channel IDGeneral ParametersAdmin Status (for details see “Admin Status” on page 154)Operational Status (Up/Down)Frequency (MHz): Calculated based on the Operation Mode and Frequency Settings for relevant Sector(s). For the Operation Modes supported in the current release (Single Sector Single BS with or without Diversity) the Channel(s) Frequency equals the Sector’s Frequency.4.9.2 SelectUse this option to select the viewing and configuration mode for a specific Radio Channel. The following options are available for the selected Radio Channel:ShowNOTEIn the current release only Radio Channels 1 and 2 (the Radio channels of BS1) are applicable.

Chapter 4 - Operation and Administration Radio Channel MenuBreezeMAX Extreme 154 System ManualUpdate4.9.2.1 ShowSelect this option to view the relevant parameters of the selected Radio Channel. The displayed information is the same as described in Show Summary (Section 4.9.1) above.4.9.2.2 UpdateSelect this option to modify the Admin Status parameter of the Radio Channel:4.9.2.2.0.1 Admin StatusThe Admin Status parameter is used to control the administrative status of the channel.For proper operation the Admin Status of all applicable channels should be enabled.The default Admin status is Disable.

Chapter 4 - Operation and Administration Antenna MenuBreezeMAX Extreme 155 System Manual4.10 Antenna MenuAccording to the capabilities supported by the hardware and (if applicable) the selected Operation Mode, the unit can use one or two antennas. For Integral Antennas the parameters are read only and cannot be modified. For External Antennas the parameters are configurable.The Antenna menu enables viewing the configured parameters of each Antenna and modifying the parameters of External Antenna(s).The Antenna menu includes the following options:Show Summary: Select this option to view all relevant parameters of the Antenna(s).Select: Use this option to select the viewing and configuration mode for a specific Antenna.4.10.1 Show SummarySelect this option to view all relevant parameters of the configured Antenna(s). For each of the available Antennas the following details are displayed:Antenna IDCurrent Antenna Gain (dBi)Configured Antenna Gain (dBi)Beam Width (degrees)Antenna PolarizationAntenna Type: Integral or External according to the unit’s type.Refer to Section 4.10.2.2 for details on these parameters.NOTEIn configurations that supports a single Antenna only Antenna 1 is available.

Chapter 4 - Operation and Administration Antenna MenuBreezeMAX Extreme 156 System Manual4.10.2 SelectUse this option to select the viewing and configuration mode for a specific Antenna. The following options are available for the selected Antenna:4.10.2.1 ShowSelect this option to view the relevant parameters of the selected Antenna. The displayed information is the same as described in Show Summary (Section 4.10.1) above.4.10.2.2 UpdateThis option is applicable only for external Antennas. Select this option to configure/modify the following parameters of the selected Antenna:Antenna Gain (dBi)Beam Width (degrees)Antenna Polarization4.10.2.2.1 Antenna Gain (dBi)The gain of the antenna in dBi.The range is from 0 to 40 dBi.The defaults is 14 dBi.4.10.2.2.2 Beam Width (degrees)The antenna’s beamwidth in degrees.Available values are 60, 90, 120 and 360 degrees.NOTEFor a Dual Slant antenna only Antenna 1 should be configured. The read-only configuration of Antenna 2 will be copied from the configuration of Antenna 1.NOTEFor units using a Band Name with limitation on the maximum allowed EIRP, the configuration range for Antenna Gain depends on the currently configured values for Tx Power and Bandwidth. For more details refer to “Tx Power” on page 126.For such units using two antennas per sector, the gain of both antennas must be set to the same value.

Chapter 4 - Operation and Administration Antenna MenuBreezeMAX Extreme 157 System ManualThe default is 0 (a different value must be configured).4.10.2.2.3 Antenna PolarizationThe polarization of the antenna.Available options are Vertical, Horizontal, Dual Slant and Omni. The Omni option is available only if the configured Beam Width is 360 degrees. No other option is supported for a beamwidth of 360 degrees.

Chapter 4 - Operation and Administration GPS MenuBreezeMAX Extreme 158 System Manual4.11 GPS MenuThe GPS menu enables viewing the status and general GPS information and the current and configured values of the GPS parameters. It also enables updating the configurable GPS parameters.The GPS menu includes the following options:4.11.1 Show SummarySelect the Show Summary option to view the following details:Chain parametersChain NumberCurrent GPS TypeConfigured GPS TypeHold Over Passed Timeout (min)Stop TX after Hold over TimeoutTime Zone Offset From UTC (hours)Daylight SavingStart DateStop DateAdvance Hour FactorFor details refer to “Chain Parameters” on page 160. The Start Date, Stop Date and Advance Hour Factor parameters are applicable only if Daylight Saving is set to Enable.Clock ParametersClock ModeExternal 1 PPS Clock

Chapter 4 - Operation and Administration GPS MenuBreezeMAX Extreme 159 System ManualExternal 10 MHz ClockFor details refer to “Clock Parameters” on page 162.GPS Info ParametersThe GPS Info Parameters include read-only information received from the GPS receiver (when available).Number Of Received Satellites: The number of satellites received by the GPS receiver. For proper operation at least four satellites should be received.Longitude: The longitude as calculated by the GPS receiver. The format is <xxx.yyy A>, where xxx is the longitude in degrees, yyy is in minutes, and A is either N (North) or S (South).Latitude: The latitude as calculated by the GPS receiver. The format is <xxx.yyy A>, where xxx is the longitude in degrees, yyy is in minutes, and B is either E (East) or W (West).Altitude: The altitude in meters as calculated by the GPS receiver.Calculated Local Date and Time: The local date and time (using 24 hours clock) as calculated using the data received from the GPS receiver and taking into account the configured Time Zone Offset From UTC and Daylight Saving parameters.Navigation Processor SW Version: The number and date of the GPS Navigation Processor SW Version. Signal Processor SW Version: The number and date of the GPS Signal Processor SW Version.GPS HW Version: The GPS HW Version.GPS StatusExternal 1PPS: The status of External 1PPS clock (OK or Failed).External 10MHz: The status of External 16MHz clock (OK or Failed).

Chapter 4 - Operation and Administration GPS MenuBreezeMAX Extreme 160 System Manual4 Satellites And More: Applicable only for Trimble GPS, indicating whether 4 (the minimum required for initial synchronization) or more satellites are received by the GPS receiver (OK or Failed). 2 Satellites And More: Applicable only for Trimble GPS, indicating whether 2 (the minimum number required for maintaining synchronization) or more satellites are received by the GPS receiver (OK or Failed).GPS Com: Applicable only for Trimble GPS, indicating the status of communication with the GPS receiver (OK or Failed).Hold Over Entered: Indicating whether the device has entered into Hold Over state (None or Started).Hold Over T/O Passed: Indicating whether Hold Over Timeout has passed (None or Passed).BS Stopped to Transmit: Indicating whether the BSs are transmitting or not (OK/Stopped).4.11.2 ConfigurationThe GPS Configuration menu enables managing the following:4.11.2.1 Chain ParametersChaining of co-located BTSs is required to fully support intra-site synchronization. When two or more BTSs are chained, all clocks are sent from the Master BTS to the Slave BTSs. The Chain menu includes parameters that should be shared by all BTSs belonging to the same chain.In the current release chaining is not supported yet and all BTSs are configured as Master.The Chain menu includes the following:4.11.2.1.1 Chain NumberThe Chain Number is used as a unique identifier of a chain. All BTSs belonging to the same chain should be configured with the same Chain Number. The Chain Number can be used by a central management system to guarantee that certain limitations are met: in each chain, one, and only one BTS should be defined as Master.The range is from 1 to 1500.

Chapter 4 - Operation and Administration GPS MenuBreezeMAX Extreme 161 System ManualThe default is 0, indicating that a Chain Number is not configured yet. A valid Chain Number must be configured, and this number must be unique in the system to properly support future implementation of chaining.4.11.2.1.2 GPS TypeThe GPS Type defines the GPS receiver. The available options are None and Trimble.The default is Trimble.4.11.2.1.3 Stop Tx After Hold Over TimeoutFor initial synchronization, a minimum of four satellites must be received properly (meeting certain criteria). Upon losing the 1PPS clock from the GPS, or if the received clock is not considered accurate enough because the number of received satellites dropped below the minimum (two satellites), the local 1PPS clock will be generated using the internal 10MHz clock. After a certain time (defined by the Hold Over Passed Timeout parameter described below), it is assumed that due to clock drifts there might be interferences among sectors belonging to the BTS and sectors belonging to neighboring BTSs). If the Stop Tx After Hold Over Timeout parameter is set to Enable, the BTS will stop transmitting after this timeout (unless the number of properly received satellites has increased again to four or more), to prevent interferences to the sectors belonging to other BTSs. If it is set to Disable, transmissions will continue indefinitely, at the expense of potential interferences to sectors belonging to other BTSs.The default is Disable (Hold Over indefinitely).4.11.2.1.4 Hold Over Passed Timeout (Min)This parameter defines the Hold Over timeout, after which there might be interferences to other sectors. When the Stop Tx After Hold Over Timeout is enabled, transmissions will stop after this timeout. When the Stop Tx After Hold Over Timeout is disabled, this timeout is used to generate a trap indicating that there might be interferences to neighboring sectors.The range is from 0 to 2880 (minutes).The default is 30 (minutes).4.11.2.1.5 Time Zone Offset From UTCThis is the offset of the local time from UTC (Coordinated Universal Time). The range is from -12:00 up to +13:00 in 30 minutes resolution. The format must be either -XX:YY or +XX:YY where YY is either 00 or 30.The default is +00:00.

Chapter 4 - Operation and Administration GPS MenuBreezeMAX Extreme 162 System Manual4.11.2.1.6 Daylight SavingThe Daylight Saving parameter is used to enable or disable the daylight saving feature using the following Start Date, End Date and Advance Hour Factor parameters. The default is Disable4.11.2.1.7 Start DateWhen Daylight Saving is enabled, this parameter defines the date for starting the daylight saving feature. At the beginning of this date (midnight at the beginning of this date), the clock will be advanced by the amount of hours specified by the Daylight Saving Advance Factor (see below).Use the format dd:mm to define the date and month at which to start activating the Daylight Saving feature.4.11.2.1.8 End DateWhen Daylight Saving is enabled, this parameter defines the date for ending the daylight saving feature (at “Daylight Saving Advance Factor” hours after midnight at the end of this date).Use the format dd:mm to define the date and month at which to end activating the Daylight Saving feature.4.11.2.1.9 Advance Hour FactorThis parameter enables configuring the amount of time by which the clock should be advanced during the daylight saving period.The range is from 0 to 4:45 (hours) in steps of 15 minutes.4.11.2.2 Clock ParametersIn the current release Clock Parameters are not configurable. The Show option for Clock Parameters displays the hard-coded Clock Mode (Master) and the sources for the main clocks in the system according to the Clock Mode.The Clock Parameters submenu includes the following:Clock ModeExternal 1PPS ClockExternal 10MHz Clock

Chapter 4 - Operation and Administration GPS MenuBreezeMAX Extreme 163 System Manual4.11.2.2.1 Clock Mode The Clock Mode parameters defines the location of the unit in the chain. The available options (not applicable for the current release) are:MasterSlave#1 (the first Slave unit in the chain, connected to the Master unit)Slave#2 (the second Slave unit in the chain, connected to Slave#1)Slave#3 (the third Slave unit in the chain, connected to Slave#2) Slave#4 (the fourth Slave unit in the chain, connected to Slave#3)Slave#5 (the fifth Slave unit in the chain, connected to Slave#4)The default is Master.Under normal conditions, the clocks are supplied by the Master unit to the Slave units. If Slave#1 will detect that it does not receive clocks for a certain period of time, it will assume that the Master unit has failed and will start using its internal 10 MHz clock, supplying the clocks also to the other slave units (if exist). Slave#2 will wait for a longer period of time before assuming that both the Master and Slave#1 have failed, and so on.The functionality and operation mode of the main clocks is:4.11.2.2.2 External 1PPS ClockThe 1PPS (Pulse Per Second) clock is used to determine the air-frame start time. Assuming that all systems use the same air-frame size and DL/UL Ratio, then, when the 1PPS clock is received from a GPS system, this mechanism ensures inter-site and intra-site synchronization among all sectors, preventing cross interference and saturation problems. When using the internal 1PPS clock (derived from the 10MHz clock source), only intra-site synchronization among sectors can be achieved.For a Master unit the default External 1PPS Clock is Disable (use internal 1PPS clock source derived from either the built-in GPS receiver or from the 10MHz clock).For Slave units the default External 1PPS Clock is Enable (derived from the previous unit in the chain).

Chapter 4 - Operation and Administration GPS MenuBreezeMAX Extreme 164 System Manual4.11.2.2.3 External 10MHz ClockThe 10MHz clock source is used for generation of all main clocking signals in the system, including the internal 1PPS clock when GPS Type is set to None or when the GPS receiver does not function properly. For a Master unit the default External 10MHz Clock is Disable (use internal clock source).For Slave units the default External 10MHz Clock is Enable (derived from the previous unit in the chain).

Chapter 4 - Operation and Administration MS MenuBreezeMAX Extreme 165 System Manual4.12 MS MenuThe MS menu enables viewing general details on MSs that exist in the database. It also enables resetting (de-registering) a connected MS. In Embedded Distributed ASN-GW Not Authenticated working mode it also enables adding/deleting MSs to/from the database.The MS menu includes the following options:Show SummaryShow Concise SummaryShow Summary by BSShow Concise Summary by BSSelect By MACAdd4.12.1 Show SummarySelect this option to view summary information and main details for all connected and pre-configured MSs. For each MS, the following information is displayed:MS MAC AddressMS IP Address: The MS Management IP addressBS ID: The BS to which the MS is connected (1 or 2), or 0 if the MS is not connected to any BS.

Chapter 4 - Operation and Administration MS MenuBreezeMAX Extreme 166 System ManualOperational Status (the current state in the network entry process):»Service Defined Not In Use»Radio Up»Authorized»In ServiceUL RSSI (dBm)UL CINR (dB)In addition, the following summary information is provided:Total Number of MSs: The total number of SUs in the database (including connected and pre-configured MSs)Total Number of MSs Connected to BS1Total Number of MSs Connected to BS24.12.2 Show Concise SummarySelect this option to view the summary information for all MSs:Total Number of MSs: The total number of SUs in the database (including connected and pre-configured MSs)Total Number of MSs Connected to BS1Total Number of MSs Connected to BS24.12.3 Show Summary by BSSelect this option to view the total number of MSs connected to a specific BS as well as main details on these MSs, as described in Section 4.12.1. You will be prompted to select the required BS ID.

Chapter 4 - Operation and Administration MS MenuBreezeMAX Extreme 167 System Manual4.12.4 Show Concise Summary by BSSelect this option to view the total number of MSs connected to a specific BS. You will be prompted to select the required BS ID.4.12.5 Select By MACSelect this option to select a specific MS by its MAC address. The menu for the selected MS includes the following options:ShowShow Allocated IP AddressesPerform and Show MS Frequency Shift MeasurementCountersDe-Register MSDelete4.12.5.1 ShowSelect this option to view the general details of the selected MS: MS IP Address:BS IDOperational Status 4.12.5.2 Show Allocated IP AddressesSelect this option to view the IP addresses allocated to the MS. For each allocated IP address the Connectivity Type (Data, Voice, or Management) will be indicated.4.12.5.3 Perform and Show MS Frequency Shift MeasurementSelect this option to measure the average frequency error of the uplink bursts transmitted by the MS. The measured frequency shift in Hz will be displayed.If the frequency error is too high, the MS generates interference limiting the ability of the BS to properly process received bursts and the maximum rate that can be used is limited. If the measured frequency shift is higher than 100 Hz it is

Chapter 4 - Operation and Administration MS MenuBreezeMAX Extreme 168 System Manualrecommended to check the MS and try to correct the situation, since the use of rates that are lower than expected may reduce also the overall throughput of the entire cell. 4.12.5.4 CountersSelect this option to view or reset the counters of the MS:UL RSSI (dBm)UL CINR (dB)UL RateUL Total Received BytesUL Total Received PacketsUL Total Lost PacketsUL Total Received BurstsUL HARQ ACK Bursts*UL HARQ NACK Bursts*UL HARQ Dropped Bursts*DL RSSI (dBm)DL CINR (dB)DL RateDL Total Transmitted BytesDL Total Transmitted PacketsDL Total Lost PacketsDL Total Transmitted BurstsDL HARQ ACK Bursts*

Chapter 4 - Operation and Administration MS MenuBreezeMAX Extreme 169 System ManualDL HARQ NACK Bursts*DL HARQ Dropped Bursts*4.12.5.5 De-Register MSSelect this option to force de-registration (link disconnection) of the MS by sending a De-Registration message from the BTS to the MS. The MS will initiate try initiating network entry again.4.12.5.6 DeleteSelect this option to delete the selected MS from the database. Applicable only in Embedded Distributed ASN-GW Not Authenticated working mode.4.12.6 AddSelect this option to Add an MS to the database. You will be prompted to enter the MAC address. Applicable only in Embedded Distributed ASN-GW Not Authenticated working mode.NOTEDL/UL HARQ counters are not supported in current releaase.

Chapter 4 - Operation and Administration Parameters SummaryBreezeMAX Extreme 170 System Manual4.13 Parameters SummaryTable 4-21: BTS Parameters SummaryParameter Range Default Run-Time UpdatedBTS - Configuration - General ParameterBTS Number 1-999999 0 NoBTS Name Up to 32 printable characters Null YesBTS Location Up to 64 printable characters Null YesBTS Contact Up to 64 printable characters Null YesBTS - Configuration - Working ModeBTS Working Mode Embedded Distributed ASN-GW AuthenticatedEmbedded Distributed ASN-GW Not AuthenticatedExternal ASN-GW (not supported in current release)Embedded Distributed ASN-GW AuthenticatedNoBTS - Configuration - ConnectivityIP Address IP address 10.0.0.1 NoSubnet Mask subnet mask 255.255.255.0 NoDefault Gateway IP address 0.0.0.0 (none) NoVLAN ID 1-4094 or 4096 for No VLAN 4096 NoVLAN Priority 0-7 NoBTS - Configuration - Authorized ManagersAuthorized Manager IP AddressIP address YesAuthorized Manager Read CommunityUp to 32 printable characters, case sensitivepublic YesAuthorized Manager Write CommunityUp to 32 printable characters, case sensitiveprivate YesTraps Distribution Enabled Disable Enable Enable YesBTS - Configuration - Radio Parameters

Chapter 4 - Operation and Administration Parameters SummaryBreezeMAX Extreme 171 System ManualOperator ID x.y.z, where x, y, z are in the range 0 to 2550.0.0 (must be changed)NoOperator Name Up to 32 printable characters Null YesService Zone ID 0-2047 0 (must be changed) NoService Zone Name Up to 32 printable characters Null YesOperation Mode Single Sector Single BS no DiversitySingle Sector Single BS no DiversityAccording to supplied hardwareNoDL/UL Ratio In current release only DL = 60% : UL = 40% is supportedDL = 60% : UL = 40% NoBand Name Applicable only for 5 GHz units. Available options depend on HW type4.9 GHz units: 4.9 GHz Universal.5.4 GHz units: 4.9 GHz Universal.NoFrequencies Management Level (if DFS supported by Band Name)Sector LevelBTS LevelSector Level NoBTS - Unit Control - Change PasswordAdministrator Password 1 to 16 printable characters, case sensitiveadmin YesInstaller Password 1 to 16 printable characters, case sensitiveinstaller YesMonitor Password 1 to 16 printable characters, case sensitivemonitor YesBTS - Unit Control - SW Version Control - Load to ShadowTFTP Server IP Address IP address YesFile Name up to 80 printable characters YesBTS-Unit Control-Configuration File Control-Upload Configuration File-Activate Upload OperationFile Type Full ConfigurationServices (SP & MSF) File (not applicable in External ASN-GW working mode)YesTFTP Server IP Address IP address YesTable 4-21: BTS Parameters SummaryParameter Range Default Run-Time Updated

Chapter 4 - Operation and Administration Parameters SummaryBreezeMAX Extreme 172 System ManualFile Name up to 80 printable characters Full Configuration: backup.resServices: profiles_srvc.resYesBTS-Unit Control-Configuration File Control-Download Configuration File-Activate Upload OperationFile Type Full ConfigurationServices (SP & MSF) File (not applicable in External ASN-GW working mode)Frequency FileYesTFTP Server IP Address IP address YesFile Name up to 80 printable characters Full Configuration: backup.resServices: profiles_srvc.resFrequency File: Rfu.dbYesBTS-Unit Control-Monitor Inactivity TimeoutMonitor Inactivity Timeout (min)0-60 minutes. 0 means no timeout. 10 minutes YesBTS-Fault Management-Trap Configuration-Distribution Enabled-UpdateTrap ID Trap ID YesTrap Distribution Enabled Disable Enable Enable YesBTS-Fault Management-Trap Configuration-Alarm Severity-UpdateTrap ID Alarm Trap ID YesTrap Severity IndeterminateCriticalMajorMinorWarningDepends on trap YesTable 4-21: BTS Parameters SummaryParameter Range Default Run-Time Updated

Chapter 4 - Operation and Administration Parameters SummaryBreezeMAX Extreme 173 System ManualBTS-Fault Management-Trap Configuration-Suppression Interval-UpdateTrap ID Trap ID YesTrap Suppression Interval (sec)0-86400 seconds. 0 means no suppression.0YesBTS-Fault Management-Event Log Selection CriterisMinimum Severity ClearIndeterminateCriticalMajorMinorWarningClear YesLast Days 1-31 days 1 day YesManaged Object Type AllBTSASN GWSectorBSRadio ChannelGPSAntennaMSAll YesSpecific Event Category AllAlarmState ChangeConfiguration ChangeSystem EventAll YesTable 4-21: BTS Parameters SummaryParameter Range Default Run-Time Updated

Chapter 4 - Operation and Administration Parameters SummaryBreezeMAX Extreme 175 System ManualUplink QoS Type BENRTYesUplink CP 0-2BE: only 0 is supported.NRT: 1-2 are supported.YesUplink CIR (NRT QoS) 32-54000 Kbps YesUplink CIR (BE&NRT QoS) 32-54000 Kbps (in NRT cannot be lower than Uplink CIR)YesDownlink QoS Type BENRTYesDownlink CP 0-2BE: only 0 is supported.NRT: 1-2 are supported.YesDownlink CIR (NRT QoS) 32-54000 Kbps YesDownlink CIR (BE&NRT QoS)32-54000 Kbps (in NRT cannot be lower than Downlink CIR)YesASN-GW - Services - Multiple Service FlowsMultiple Service Flow Name 1-32 printable characters YesService Group Name A Service Group Name that exists in database.YesService Operation Mode BridgeRouterYesASN-GW - Services - Multiple Service Flows - Selected Multiple Service Flow - Service RulesService Interface Name A Service Interface Name that exists in database.YesASN-GW - Services - Multiple Service Flows - Selected Multiple Service Flow - Service Rules - Selected Service Rule - ClassifiersUplink Classifier Type AnyDSCPUplink Classifier Parameter 1 0-63 YesTable 4-21: BTS Parameters SummaryParameter Range Default Run-Time Updated

Chapter 4 - Operation and Administration Parameters SummaryBreezeMAX Extreme 176 System ManualUplink Classifier Parameter 2 0-63 (cannot be lower than Uplink Classifier Parameter 1)YesDownlink Classifier Type AnyDSCPDownlink Classifier Parameter 10-63 YesDownlink Classifier Parameter 20-63 (cannot be lower than Downlink Classifier Parameter 1)YesASN-GW - Services - Service GroupsService Group Name 1-32 printable characters YesDHCP Type Transparent (in current release only Transparent mode is supported)YesNomadic Mode EnableDisableDisable YesAttribute 31 NoneCPE MAC AddressCPE Fully Qualified Domain NameCPE MAC Address YesAttribute 32 NoneBTS MAC AddressGIADDRService Interface VLANManagement IP AddressBS IDBTS NameFree TextAttribute 32 Free Text 1-32 printable characters YesASN-GW - Services - Service InterfacesService Interface Name 1-32 printable characters YesTable 4-21: BTS Parameters SummaryParameter Range Default Run-Time Updated

Chapter 4 - Operation and Administration Parameters SummaryBreezeMAX Extreme 177 System ManualForwarding Rule Name A Forwarding Rule Name that exists in database.YesCS Type Ethernet CSIP CSIn current release only IP CS is supportedIP CS YesVLAN Interface EnableDisableEnable YesVLAN ID 1-4094 or null for No VLAN YesVLAN Priority 0-7 YesInner DSCP Marking EnableDisableYesInner DSCP 0-63 YesASN-GW - Services - Forwarding RulesForwarding Rule Name 1-32 printable characters YesRelay Mode EnableDisableYesUnknown Address Forwarding ModeForwardDiscardYesQoS Type BENRTYesCP 0-2BE: only 0 is supported.NRT: 1-2 are supported.YesCIR (NRT QoS) 32-54000 Kbps YesCIR (BE&NRT QoS) 32-54000 Kbps (in NRT cannot be lower than CIR)YesSector - General ParameterSector Name Up to 32 printable characters null YesTable 4-21: BTS Parameters SummaryParameter Range Default Run-Time Updated

Chapter 4 - Operation and Administration Parameters SummaryBreezeMAX Extreme 178 System ManualSector Location Up to 64 printable characters Null YesSector Heading 0-359 (degrees) 0 YesBandwidth 5 MHz (not supported by some 5.4 GHz Band Names)10 MHz10 MHz NoFrequency Depends on supported frequency band and configured Bandwidth. In 5 GHz units depend also on Band Name.Depends on supported frequency band. In 5 GHz units depend also on Band Name.NoTx Power Depends on unit type. In 5 GHz units depend also on Band Name and Antenna Gain.Depends on unit type. In 5 GHz units depend also on Band Name and Antenna Gain.NoDFS (5 GHz units using a Band Name supporting DFS)DFS Support EnableDisableEnable NoChannel Availability Check Time0-600 seconds 60 seconds NoChannel Non Occupancy Period0-60 minutes 30 minutes NoStartup Test Valid Period 0-48 hours 6 hours NoRadar Detection Threshold -36 to -70 dBm EIRP>30 dBm: -67EIRP=23-30 dBm:-64EIRP<23 dBm: -62NoBS - General ParametersBS Name Up to 32 printable characters Null YesBS - MACSegment Number 0-3 0 NoCell Number 0-31. For cells with 4 sectors the range is 0-17.0NoTable 4-21: BTS Parameters SummaryParameter Range Default Run-Time Updated

Chapter 4 - Operation and Administration Parameters SummaryBreezeMAX Extreme 179 System ManualCell Radius 8000-40000 (meter)In current release only 8000 and 40000 are supported40000 NoMap Repetition 1, 2, 4. 1 NoBS - PHYDiversity SISOMIMO Matrix ASingle Sector Single BS no Diversity: SISOSingle Sector Single BS with Diversity: MIMO Matrix ANoUL Thermal Noise Level -130 to -100 (dBm) -128 NoBS - Multi RateUL Minimum Sub-Channels 5 MHz BW: 1-1710 MHz BW: 1-354YesUplink Multi Rate Support EnableDisableEnable NoUplink Basic Rate QPSK-CTC-1/2 REP4QPSK-CTC-1/2 REP2QPSK-CTC-1/2QPSK-CTC-3/4QAM16-CTC-1/2QAM16-CTC-3/4QAM64-CTC-2/3QAM64-CTC-3/4QAM64-CTC-5/6QAM64-CTC-1/2 NoUplink Fade Margin 0-15 (dB) 2 (dB) NoDownlink Multi Rate Support EnableDisableEnable NoTable 4-21: BTS Parameters SummaryParameter Range Default Run-Time Updated

Chapter 4 - Operation and Administration Parameters SummaryBreezeMAX Extreme 180 System ManualDownlink Basic Rate QPSK-CTC-1/2 REP4QPSK-CTC-1/2 REP2QPSK-CTC-1/2QPSK-CTC-3/4QAM16-CTC-1/2QAM16-CTC-3/4QAM64-CTC-2/3QAM64-CTC-3/4QAM64-CTC-5/6QAM64-CTC-1/2 NoUplink Fade Margin 0-15 (dB) 2 (dB) NoBS - ChannelizationDL Permutation Base FixVariableRotatedIn current release only Fix is supportedFix NoDL Permutation Base Value 0-31 0 NoUL Permutation Base FixVariableRotatedIn current release only Fix is supportedFix NoUL Permutation Base Value 0-69 0 NoMajor Group 0-63. In current release only the default is supported (63 for BS BW 10 MHz, 21 for BS BW 5 MHz).)63 for BS bandwidth of 10 MHz.21 for BS bandwidth of 5 MHz.NoBS - R6 Interface - ConnectivityBS IP Address IP address NoTable 4-21: BTS Parameters SummaryParameter Range Default Run-Time Updated

Chapter 4 - Operation and Administration Parameters SummaryBreezeMAX Extreme 181 System ManualBS Subnet Mask subnet mask NoBS Default Gateway IP address NoASN-GW IP Address IP address NoASN-GW Subnet Mask subnet mask NoASN-GW Default Gateway IP address NoASN-GW Default VLAN ID 1-4094 or 4096 for No VLAN 4096 NoASN-GW Default VLAN Priority0-7 NoASN-GW DSCP 0-63 0 NoBS - R6 Interface - DSCP QoS MarkingNRT DSCP Marking Mode TransparentMarkingTransparent YesNRT DSCP Value 0-63 0 YesBE DSCP Marking Mode TransparentMarkingTransparent YesBE DSCP Value 0-63 0 YesBS - R6 Interface - VLAN Priority QoS MarkingNRT VLAN Priority Marking ModeNone SpecificTransparent (not supported in current release)MarkingNone Specific YesNRT VLAN Priority Value 0-7 0 YesBE VLAN Priority Marking ModeNone SpecificTransparent (not supported in current release)MarkingNone Specific YesBE VLAN Priority Value 0-7 0 YesBS - R6 Interface - BS and ASN-GW Keep AliveTable 4-21: BTS Parameters SummaryParameter Range Default Run-Time Updated

Chapter 4 - Operation and Administration Parameters SummaryBreezeMAX Extreme 182 System ManualKeep Alive Support EnableDisableDisable YesKeep Alive Timer (sec) 60-180 seconds 60 YesKeep Alive Interval (sec) 1-30 seconds 5 YesMaximum Number of Keep Alive Failures1-10 3 YesRadio Channel - GeneralAdmin Status EnableDisableDisable YesAntenna (configurable only for external antenna)Antenna Gain 0-40 dBi 14 NoBeam Width 60, 90, 120 or 360 degrees YesAntenna Polarization Vertical, Horizontal, Dual Slant or Omni YesGPS - Chain ParametersChain Number 1 - 1500 0 (means not defined yet-must be defined)NoGPS Type NoneTrimbleTrimble YesHold Over Passed Timeout 0 - 2880 (minutes) 30 (minutes) NoStop Tx After Hold Over TimeoutDisable EnableDisable NoTime Zone Offset From UTC -12:00 to +13:00 in steps of 30 minutes +00:00 NoDaylight Saving Disable EnableDisable NoDaylight Saving Start Date dd.mm YesDaylight Saving End Date dd.mm 9 YesDaylight Saving Advance Factor0 to 4:45 hours in 15 minutes steps +00:00 YesGPS - Clock ParametersTable 4-21: BTS Parameters SummaryParameter Range Default Run-Time Updated

Chapter 4 - Operation and Administration Parameters SummaryBreezeMAX Extreme 183 System ManualClock Mode MasterSlave#1Slave#2 Slave#3Slave#4Slave#5Not configurable in the current release: only Master is supported (no chaining).Master NoExternal 1 PPS Clock EnableDisableNot configurable in the current release.Master: DisableSlave: EnableNoExternal 10 MHz Clock EnableDisableNot configurable in the current release.Master: DisableSlave: EnableNoMS - Add (applicable only in Embedded Distributed ASN-GW Not Authenticated working mode)Select MS MAC MAC address YesTable 4-21: BTS Parameters SummaryParameter Range Default Run-Time Updated

ChapterGlossary

BreezeMAX Extreme 185 System ManualAAA Authentication, Authorization, and Accounting (pronounced "triple a."). A system (or several systems) that controls what resources users have access to, and keeps track of the activity of users over the network. AAS Adaptive Antenna System, also called Advanced Antenna System, is a technology to enable the network operators to increase the wireless network capacity. In addition, adaptive antenna systems offer the potential of increased spectrum efficiency, extended range of coverage and higher rate of frequency reuse. Adaptive antenna systems consist of multiple antenna elements at the transmitting and/or receiving side of the communication link, whose signals are processed adaptively in order to exploit the spatial dimension of the mobile radio channel. Depending on whether the processing is performed at the transmitter, receiver, or both ends of the communication link, the adaptive antenna technique is defined as multiple-input single-output (MISO), single-input multiple-output (SIMO), or multiple-input multiple-output (MIMO).ASCII American Standard Code for Information Interchange. A code for representing English characters as numbers, with each letter assigned a number from 0 to 127.ASN Access Service Network. An ASN is defined as a complete set of network functions needed to provide radio access to a WiMAX subscriber. An ASN is comprised of network elements such as one or more Base Stations (BS) and one or more ASN gateways (ASN-GW). An ASN may be shared by more than one Connectivity Service Network (CSN).ASN-GW Access Service Network Gateway. The ASN-GW is a network entity that acts as a gateway between the ASN and CSN. The ASN functions hosted in an ASN-GW may be viewed as consisting of two groups - the decision point (DP) that provides control functionality and enforcement point (EP) that provides bearer transport.AU Access UnitAWG An electronics industry acronym for American Wire Gauge. AWG is a measure of the thickness of copper, aluminum and other wiring.BTS Base Transceiver Station. A wireless network element that provides the radio interface of the network. The BTS comprises the radio transmission and reception devices, and also manages the signal processing related to the air interface.BW BandwidthCINR Carrier-to-Interference plus Noise Ratio (expressed in dB)CIR Committed Information Rate. The rate (in bits per second) at which a network guarantees to transfer information under normal conditions, averaged over a minimum increment of time.CLI Command Line Interface. A user interface that accepts typed commands to instruct the managed device on the task to perform.CPU Central Processing Unit.CS Convergence Sublayer. Particular protocols that are responsible for gathering and formatting higher layer information so it can be processed by the lower layers.

BreezeMAX Extreme 186 System ManualCSMA/CD Carrier Sense Multiple Access with Collision Detection. Media-access mechanisms wherein devices ready to transmit data first check the channel for a carrier. If no carrier is sensed for a specific period of time, a device can transmit. If two devices transmit at once, a collision occurs and is detected by all colliding devices. This collision subsequently delays retransmissions from those devices for some random length of time. Ethernet and IEEE 802.3 use CSMA/CD access.CSN Connectivity Service Network. A CSN is defined as a set of network functions that provide IP connectivity services to WiMAX subscribers and all the IP core network functions. A CSN is comprised of network elements such as routers, proxy/servers, user databases, and inter-working gateway devices.CTC Convolutional Turbo Code is a type of turbo codes with some of the convolutional schemes used. For its high-performance error correction nature, CTC is the iterative decoding scheme of choice as evidenced by their wide adoption in standards bodies.DCD Downlink Channel Descriptor.DHCP Dynamic Host Configuration Protocol. A protocol for dynamically assigning IP addresses from a pre-defined list to nodes on a network. Using DHCP to manage IP addresses simplifies client configuration and efficiently utilizes IP addresses. DL Down LinkDSCP Differentiated Service Code Point, AKA DiffServ: An alternate use for the ToS byte in IP packets. Six bits of this byte are being reallocated for use as the DSCP field where each DSCP specifies a particular per-hop behavior that is applied to the packet.DNS Domain Naming System. A system that stores information about hostnames and domain names. DNS provides an IP address for each hostname, and lists the e-mail exchange servers accepting e-mail addresses for each domain. DSL Digital Subscriber Line. A technology that exploits unused frequencies on copper telephone lines to transmit traffic typically at multi-megabit speeds. DSL can allow voice and high-speed data to be sent simultaneously over the same line. Because the service is 'always available,' end-users don't need to dial in or wait for call set-up.EAP Extensible Authentication Protocol, A protocol used between a user station and an authenticator or authentication server. It acts as a transport for authentication methods or types. It, in turn may be encapsulated in other protocols, such as 802.1x and RADIUS. EAP is defined by RFC 2284.EDT Electrical Down-TiltEIRP Equavalent Isotropic Radiated Power. The apparent power transmitted towards the receiver, if it is assumed that the signal is radiated equally in all directions. The EIRP is equal to the power (in dBm) at the antenna port, plus the power gained from the directivity of the antenna (in dBi).EMC Electro-Magnetic Compatibility. The capability of equipment or systems to be used in their intended environment within designed efficiency levels without causing or receiving degradation due to unintentional EMI (Electro Magnetic Interference). EMC generally encompasses all of the electromagnetic disciplines.

BreezeMAX Extreme 187 System ManualETS European Telecommunications StandardETSI European Telecommunications Standards Institute. A non-profit organization producing voluntary telecommunications standards used throughout Europe, some of which have been adopted by the EC as the technical base for Directives or Regulations. GPS Global Positioning System. A system that uses satellites, receivers and software to allow users to determine their precise geographic position.GRE General Routing Encapsulation. A method or technique of adding an IP standard header and trailer to a message that does not follow IP protocols. The encapsulated message is sent over a public network while received messages are stripped of the wrapper and processed. This permits non-standard data and totally encrypted messages to use the Internet. The technology is an important element in Virtual Private Network (VPN) offerings.HP High Power.IEEE Institute of Electrical and Electronics Engineers. IEEE (pronounced I-triple-E) is an organization of engineers, scientists, and students. The IEEE is best known for developing standards for the computer and electronics industry. In particular, the IEEE 802 standards for local-area networks are widely followed.IEEE 802.16 Also known as WIMAX. A group of broadband wireless communications standards for metropolitan area networks (MANs) developed by a working group of the IEEE.IEEE 802.16e 802.16e, also known as 802.16-2005, is an IEEE standard addressing mobility of wireless broadband (WiMax). IEEE 802.16e is sometimes called Mobile WiMAX, after the WiMAX forum for interoperability. 802.16e, based on an existing WiMAX standard 802.16a, adds WiMAX mobility in the 2-to-6 GHz-licensed bands. 802.16e allows for fixed wireless and mobile Non Line of Sight (NLOS) applications primarily by enhancing the OFDMA (Orthogonal Frequency Division Multiple Access).IEEE 802.1p A QoS method - A three-bit value that can be placed inside an 802.1Q frame tag. IEEE 802.1q The IEEE 802.1q standard defines the operation of VLAN Bridges that permit the definition, operation and administration of Virtual LAN topologies within a Bridged LAN infrastructure. The 802.1q specification establishes a standard method for inserting VLAN membership information into Ethernet frames. A tag field containing VLAN (and/or 802.1p priority) information can be inserted into an Ethernet frame, carrying VLAN membership information.IEEE 802.3 A Local Area Network protocol suite commonly known as Ethernet. Ethernet uses Carrier Sense Multiple Access bus with Collision Detection CSMA/CD. This method allows users to share the network cable. However, only one station can use the cable at a time. A variety of physical medium dependent protocols are supported.IF Intermediate Frequency. Radio communications systems modulate a carrier frequency with a baseband signal in order to achieve radio transmission. In many cases, the carrier is not modulated directly. Instead, a lower IF signal is modulated and processed. At a later circuit stage, the IF signal is converted up to the transmission frequency band.

BreezeMAX Extreme 188 System ManualIGMP Internet Group Membership Protocol) is protocol used by IP hosts to report their host group memberships to any immediately neighboring multicast routers.The use of IP multicasting in TCP/IP networks is defined as a TCP/IP standard in RFC 1112. In addition to defining address and host extensions for how IP hosts support multicasting, this RFC also defines the IGMP version 1. Version 2 of IGMP is defined in RFC 2236. Both versions of IGMP provide a protocol to exchange and update information about host membership in specific multicast groups.IP Internet Protocol. The standard that defines how data is transmitted over the Internet. IP bundles data, including e-mail, faxes, voice calls and messages, and other types, into "packets", in order to transmit it over public and private networks.LED Light Emitting Diode.MAC Media Access Control. The lower of the two sub-layers of the data link layer defined by the IEEE. The MAC sub-layer handles access to shared media, such as whether token passing or contention will be used.MAC Address Standardized data link layer address that is required for every port or device that connects to a LAN. Other devices in the network use these addresses to locate specific ports in the network and to create and update routing tables and data structures. MAC addresses are 6bytes long and are controlled by the IEEE. MDT Mechanical Down-TiltMIB Management Information Base. A database of objects that can be monitored by a network management system. SNMP uses standardized MIB formats that allow any SNMP tools to monitor any device defined by a MIB.MIMO Multiple Input, Multiple Output. A technique for faster wireless communication. MIMO allows for the use of multiple transmitter and receiver antennas to increase throughput and range.MIP Mobile IP. A protocol used to provide IP mobility to IPv4-based nodes, defined in RFC-2002.MIR Maximum Information Rate. Specifies the maximum rate of information that can be available to a user. The MIR is used by the traffic policing mechanism to prevent users from sending excess traffic to the network.MTU Maximum Transmission Unit. This is the greatest amount of data that can be transferred in one physical frame on the network. If a packet that has a smaller MTU than the packet's frame length is sent, fragmentation will occur. For TCP, MTU can range from 68 to 1500 bytes. Larger MTUs provide for lower overhead (fewer headers).MS Mobile Station. The equipment used by the end user to access the WiMAX network.NAP Network Access Provider. A NAP is a business entity that provides WiMAX radio access infrastructure to one or more Network Service Providers (NSPs). An NAP implements this infrastructure using one or more ASNs.

BreezeMAX Extreme 189 System ManualNMS Network Management System. A system responsible for managing at least part of a network. An NMS is generally a reasonably powerful and well-equipped computer, such as an engineering workstation. NMSs communicate with agents to help keep track of network statistics and resources.NSP Network Service Provider. An NSP is a business entity that provides IP connectivity and WiMAX services to WiMAX subscribers compliant with the established service level agreement. The NSP concept is an extension of the Internet service provider (ISP) concept, providing network services beyond Internet access. To provide these services, an NSP establishes contractual agreements with one or more NAPs. An NSP may also establish roaming agreements with other NSPs and contractual agreements with third-party application providers (e.g. ASP, ISP) for the delivery of WiMAX services to subscribers. From a WiMAX subscriber standpoint, an NSP may be classified as a home or visited NSP.OFDM Orthogonal Frequency Division Multiplexing: A method for multiplexing signals, which divides the available bandwidth into a series of frequencies known as tones. Orthogonal tones do not interfere with each other when the peak of one tone corresponds with the null. The rapid switching, frequency-hopping technique is intended to allow more robust data service.OFDMA Orthogonal Frequency Division Multiple Access. It’s a logical extension of OFDM and a modulation/multiple access technique. OFDMA divides a signal into sub-channels (i.e. groups of carriers), with each sub-channel (or several sub-channels) being allocated to a different subscriber. PER Packet Error Rate. In a digital transmission, PER is the percentage of packets with errors divided by the total number of packets that have been transmitted, received or processed over a given time period.PHY PHYsical Layer. The physical, or lowest, layer of the OSI Network Model. In a wireless network, the PHY defines parameters such as data rates, modulation method, signaling parameters, transmitter/receiver synchronization, etc. Within an actual radio implementation, the PHY corresponds to the radio front end and baseband signal processing sections.PS Power SupplyQoS Quality of Service. Measure of performance for a transmission system that reflects its transmission quality and service availability.QPSK Quadrature Phase Shift Keying. A data transfer technique used in coaxial cable networks that sends data using modulating signals. Four different phases represent data, with each signal's information determined by the signal before it. For example, if a phase stays the same from one signal to the other, the information has not changed.RADIUS Remote Authentication Dial-In User Service, an authentication and accounting system used by many Internet Service Providers (ISPs). When you connect to the system you must enter your username and password. This information is passed to a RADIUS server, which checks that the information is correct, and then authorizes access to the system.

BreezeMAX Extreme 190 System ManualRF Radio frequency. An AC signal of high enough frequency to be used for wireless communications. RFC Request For Comments. The name of the result and the process for creating a standard on the Internet. New standards are proposed and published on the Internet, as a Request For Comments. The proposal is reviewed by the Internet Engineering Task Force.RoHS Restriction of the use of certain Hazardous Substances in electrical and electronic equipment, reference EC Directive 2002/95/EC of 27 January 2003.RSSI Received Signal Strength Indicator. A signal or circuit that indicates the strength of the incoming (received) signal in a receiver.Rx ReceiveSNMP Simple Network Management Protocol. A network management protocol that provides a means to monitor and control network devices, and to manage configurations, statistics collection, performance, and security. SNMP works by sending messages, called protocol data units (PDUs), to different parts of a network. SNMP-compliant devices, called agents, store data about themselves in Management Information Bases (MIBs) and return this data to the SNMP requesters.SSH Secure Shell is a protocol for secure remote login and other secure network services over an insecure network.TCP Transmission Control Protocol. Connection-oriented transport layer protocol that provides reliable full-duplex data transmission. TCP is the part of the TCP/IP suite of protocols that is responsible for forming data connections between nodes that are reliable, as opposed to IP, which is connectionless and unreliable. TFTP Trivial File Transfer Protocol. Simplified version of FTP that allows files to be transferred from one computer to another over a network, usually without the use of client authentication.Tx TransmitUAbbreviation for "Unit" or standard height measurement which defines the vertical height for plug-in modules in the 19” construction system. One U equals 44.5 mm.UCD Uplink Channel Descriptor.UDP User Datagram Protocol. Connectionless transport layer protocol in the TCP/IP protocol stack. UDP is a simple protocol that exchanges datagrams without acknowledgments or guaranteed delivery, requiring that error processing and retransmission be handled by other protocols. UDP is defined in RFC 768. UL Up LinkVLAN Virtual Local Area Network. A group of devices on one or more LANs that are configured with the same VLAN ID so that they can communicate as if they were attached to the same wire, when in fact they are located on a number of different LAN segments. Used also to create separation between different user groups.

BreezeMAX Extreme 191 System ManualVoIP Voice over Internet Protocol. Provides an advanced digital communications network that bypasses the traditional public switched telephone system and uses the Internet to transmit voice communication. VoIP enables people to use the Internet as the transmission medium for telephone calls by sending voice data in packets using IP rather than by traditional circuit switched transmissions of the PSTN.WCS Wireless Communications Service is defined by the Federal Communications Commission as radio communications that may provide fixed, mobile, radio location, or satellite communication services to individuals and businesses within their assigned spectrum block and geographical area. The WCS is in the 2.3 GHz band from 2,305 to 2,320 MHz and 2,345 to 2,360 MHz..WEEE Waste Electronic and Electrical Equipment. The purpose of Directive 2002/96/EC on waste electrical and electronic equipment (WEEE) is, as a first priority, the prevention of waste electrical and electronic equipment (WEEE), and in addition, the reuse, recycling and other forms of recovery of such wastes so as to reduce the disposal of waste. It also seeks to improve the environmental performance of all operators involved in the life cycle of electrical and electronic equipment, e.g. producers, distributors and consumers and in particular those operators directly involved in the treatment of waste electrical and electronic equipment.Wi-Fi Wi-Fi (short for wireless fidelity and pronounced 'why-fye') is a term for certain types of wireless local area network that use specifications in the IEEE 802.11 family. The term Wi-Fi was created by an organization called the Wi-Fi Alliance, which oversees tests that certify product interoperability.WiMAX WiMAX is an acronym that stands for Worldwide Interoperability for Microwave Access. WiMAX is a standards-based technology enabling the delivery of last mile wireless broadband access as an alternative to cable and DSL. WiMAX provides fixed, nomadic, portable, and mobile wireless broadband connectivity without the need for direct line-of-sight to a base station.XML Extensible Markup Language. Language used for defining a set of markers, called tags, that define the function and hierarchical relationships of the parts of a document or data set. It is a flexible way to create common information formats and share both the format and the data, most commonly on the web. It generally similar to HTML and helps share information in a consistent way. XML is "extensible" because, unlike HTML, the markup symbols are unlimited and self-defining.

Navigation menu