Alvarion Technologies PC-DS11 PCMCIA WLAN User Manual Revised users guide

Download:
Mirror Download [FCC.gov]
Document ID	62075
Application ID	UiqidrDRZ/h/s8eNUMBB6g==
Document Description	Revised users guide
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	2.16kB (26941 bits)
Date Submitted	1999-10-05 00:00:00
Date Available	1999-10-07 00:00:00
Creation Date	2001-05-22 14:49:28
Producing Software	Acrobat Distiller 4.0 for Windows
Document Lastmod	2001-05-22 14:49:29
Document Title	Revised users guide

2.
3.
To check which version of Windows 95 do the
following:
•
Select icon My Computer from the
desktop.
•
Press the right button of the mouse.
•
Select Properties from the pop-up
menu.
•
Under the title System will appear
the version of Windows. If appears
4.00.950B then you have Windows
95B otherwise Windows 95A.
While Windows is running, insert the PCDS.11 card into the PCMCIA slot.
Continue to par. 3.1 for Windows 95A
Continue to par. 3.2 for Windows 95 B
Continue to par. 3.3 for Windows 98
Continue to par. 3.4 for Windows NT4
3.1 Windows 95A
1. Windows 95 detects the adapter and displays
the dialog box "New Hardware Found".
2. Select "Driver from disk provided by hardware
manufacturer", and then click OK.
3. In the "Install from disk " dialog box:
Type "A:\", insert diskette provided by
BreezeCOM, then click OK.
The PC copies the necessary files from the
diskette
4.
The dialog box "Please insert disk labeled
Windows 95 CD-ROM" appears then click OK.
5. The installation of the drivers is now complete.
NOTE: If it is the first time a network card is installed,
usual network setup dialog will sometimes be displayed
(Machine name, workgroup name, etc).
3.2 Windows 95 B (OSR2)
1. Windows 95 detects the adapter and displays
briefly the dialog box "New Hardware Found".
2. Windows then displays the "Update Device
Driver Wizard" dialog box.
3. Insert the disk provided by BreezeCOM.
4. Click "Next"
7. When the dialog box notifying that Windows
found the driver " BreezeCOM Wireless LAN
Adapter", click "Finish".
8. Windows will ask for the CAB files if it didn’t
find them itself. Enter the path where the cab
files can be found. The installation of the drivers
is now complete.
3.3 Windows 98
1. Windows 98 detects the adapter and displays
briefly the dialog box "New Hardware Found".
2. Windows then displays the "Add New Hardware
Wizard" dialog box. Click "Next"
3. Select option "Search for best driver." and
press "Next"
4. Insert the disk provided by BreezeCOM.
5. Select option "Floppy disk drives" and press
"Next"
6. Wizard notifies that the driver for PC-DS.11
Wireless LAN Adapter is located. Click "Next"
When the dialog box notifying that Windows finished
installing the driver for " BreezeCOM Wireless LAN
Adapter", click "Finish".
3.4 Windows NT 4
1. Open Control Panel and double click on the
Network icon.
2. If message is displayed, "The Windows NT
Networking is not installed. Do you want to
install it now?” click Yes, choose "Wired to the
network", and click Have Disk. If message is
not displayed, go to Adapters tab, click Add,
and click "Have" Disk.
3. Enter location of the driver files (for example,
"A:"). Click OK.
4. Choose from the displayed list "PC-DS.11
Wireless LAN PC Card". Click OK.
5. Specify the hardware resources for the PC
Card:
Address of memory window
IRQ number
(Use Windows NT Diagnostic WINMSD to
see which resources are already taken)
6. Click on Close.
7. Click on Close.
Configuration dialogs for other network components may
appear. Enter information required for these dialogs. The
installation is complete.
Restart Windows NT.
3.5 Troubleshooting
If the card does not function properly, check Device
Manager for conflicts with other devices and drivers.
1. Right click my computer, Properties then
Device Manager Tab. Click the Network
Adapters to verify the status of the
BreezeCOM DS.11 PC card wireless LAN
adapter. An exclamation mark next to the card
indicates a conflict.
In the event you have a Resource Conflict do the
following:
1. Double click on the BreezeCOM Wireless LAN
adapter.
2. Select Resources tab.
3. In the event that conflicting resources are
listed in "Conflicting device list", edit the
Memory Range and Interrupt to values that do
not cause conflicts.
If you don't have resource conflict and the card still
doesn't work there might be a conflict with DOS drivers
that Windows doesn't recognize.
1. Look for device drivers or lines containing
device or call commands in either
autoexec.bat or config.sys.
2. Disable the conflicting drivers and devices and
un-install and then reinstall the card.
If you have bad performance with the NT driver, try using
a different IRQ, even if the IRQ does not appear in the
conflicting list.
4. Link Status ICON
No Link with AP.
Link and association with an AP.
5. The Control Panel Utility
The control panel utility will install with the driver
installation.
6. Un-installing in Windows95/98/NT4
1. To stop the PC card (if it is running) Select
Start=>Setting=>Control Panel=>PC Card icon
Then the PC Card Properties window will
appear. Select "PC-DS.11 Wireless LAN PC
Card" and press Stop.
2. Wait for the message "You may safely remove
this device" and then remove the PC-DS.11
from your computer.
3. Close all active applications.
4. Select Start=>Setting=>
Control Panel=>Network, select the
BreezeCOM Wireless LAN adapter, and press
the REMOVE button and then press OK.
5. Select Yes when asked to restart your
computer
6. Restart the computer.
7. Running the Control Panel Utility
1. To start the utility, double click on the Link
Status Icon on the Icon bar or double click on
the CON1100 Icon in the control panel. Click
on ‘Join’ after highlighting the network to
attach to.
Manufacturers Federal Communication Commission
Declaration of Conformity Statement
Manufacturer:
BreezeCOM, Ltd.
Atidim Technological Park
Bldg 1
Tel Aviv 61131, Israel
Model: PC-DS.11
This device complies with part 15 of the FCC rules. Operation
is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received,
including interference that may caused undesired
operation.
This equipment has been tested and found to comply with the
limits of a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is
operated in a residential environment. This equipment
generates, uses, and radiates radio frequency energy, and if not
installed and used in accordance with the instructions, may
cause harmful interference. However, there is no guarantee that
interference will not occur. If this equipment does cause
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to correct the interference by one of the following
measures: 1) Reorient or relocate the receiving antenna, 2)
Increase separation between the equipment and receiver, 3)
Connect the equipment into an outlet on a circuit different from
which the receiver is connected, 4) Consult the dealer or an
experienced radio/TV technician.
Other BreezeNet DS.11 Series Products…
AP-DS.11 802.11, 11Mbps DS Access Point
SA-DS.11, 802.11, 11Mbps DS Station Adapter
Supports 4 MAC address (1 physical port)
1.1 Package Contents
When you first open the PC-DS.11, the package
contains the following:
ISA-DS.11, 802.11, 11Mpbs DS ISA Adapter Card
1. PC-DS.11 PC Card
WBS-DS.11, 802.11, 11Mbps DS Wireless Base Station
For long range Point to Point or Multi-point.
2. Quick Installation and Operation Guide
3. PC-DS.11 Drivers and Utility Disk
WBC-DS.11, 802.11, 11Mbps DS Wireless Bridge Client
Cat. No. PCDS080399 Rev. B
HTTP://www.breezecom.com
BreezeNET PC-DS.11 Drivers
Quick Installation & Operation Guide
1. Introduction
2. General Information
The PC-DS.11 will work only with the DS.11 series
Access Point (AP) or Wireless Base Station (WBS).
Your DS.11 PC Card is also compatible with other AP’s
as long as they are 802.11 DS compliant.
3. Installation for Windows 95/98/NT4
IMPORTANT: Make sure that you have access to the
Windows CAB files (Installation CD or copy on local
hard disk usually found in
c:\Windows\Options\Cabs). Please note that
Windows requires your cab files to be in a directory
whose name must NOT exceed 8 letters. It is
advisable to restart windows when the installation is
completed.
1. Installation of PC cards is different for different
versions of Windows. Before starting to install
the card check which version of Windows you
are running.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : Yes
Create Date                     : 2001:05:22 14:49:28
Producer                        : Acrobat Distiller 4.0 for Windows
Modify Date                     : 2001:05:22 14:49:29-04:00
Page Count                      : 2

EXIF Metadata provided by EXIF.tools