AmRoad Technology 00100AMROAD ZigBee server User Manual
AmRoad Technology Inc. ZigBee server
manual
ZigBee Server User Guide
1
ZigBee Server
USER GUIDE
Version: 1.0
Issued Date:
For Models: ZS211H / ZS212H / UBIQ520
ZigBee Server User Guide
1
Contents
Chapter 1: Introduction 1
Welcome 1
Chapter 2: Installing 2
Chapter 3: Using the ZigBee Server 3
3.1 Internet Protocol (TCP/IP) setting 3
3.2 Setting IE 7
3.3 Log in ZS211H Web 10
3.4 Web UI 13
3.5 Features 14
3.6 Hardware rest 23
Appendix A: Limited Use of Radio Frequency 24
ZigBee Server User Guide
1
Chapter 1 : Introduction
Welcome
The ZS211H ZigBee Gateway is a stand alone device that allows one to configure and control their ZigBee mesh network using a
network-connected computer. The ZS211H can be accessed from anywhere on the IP networks, Ethernet or Internet, allowing one to
control their ZigBee devices from home, office or on the road where Internet connectivity is available. This document defines the
specifications of this product. It covers setting hardware, software and mechanism, most of all it defines the user interface and
configuring of this gateway.
This product provides many extraordinary features:
Bridging IP network and ZigBee mesh network.
Web User Interface for managing and configure ZigBee devices from IP networks.
Create and control scenes (group multiple devices and control by one command).
Act as the coordinator of ZigBee mesh network.
Assign or release routers.
Include and exclude ZigBee devices.
Configure, group and name ZigBee devices
Scheduling control of ZigBee devices
Set wake-up interval on battery-operated devices
Administrator ID and password for security
Socket API and “cgi” command interfaces
ZigBee Server User Guide
2
Chapter 2 : Installing
Package Contents
The following items are included in your ZigBee Server package. Check this list before installation to ensure that
you have received all items.
n ZigBee Server
o Power Adapter
p Ethernet Cable
q Phenix Connecter
r Installation CD
Please contact your dealer immediately
in case you are missing items.
ZigBee Server User Guide
3
Chapter 3 : Using the ZigBee Server
ZS211H default IP is 192.168.0.100:3000，default data address of return destination is 192.168.0.200:2000。
3.1 Internet Protocol (TCP/IP) setting：
a. On PC home page of Microsoft Windows. Click “right key” of mouse upon 「My Network Place」, select 「Properties」.
b. Select 「Local Area Connection」， click right key at 「Properties」
ZigBee Server User Guide
4
c. Select「Internet Protocol(TCP/IP) 」，click「Properties」.
ZigBee Server User Guide
5
ZigBee Server User Guide
6
d. in「using the following IP address」 key in IP address： 192.168.0.200，subnet mask：255.255.255.0，click 「ok」。
Just remind you to set the IP section to meet your current network section after set this device !
ZigBee Server User Guide
7
3.2 Setting IE：
a. click「Internet Explorer」browser。
b. click 「Tools」，then 「Internet Options」。
c. select「Connections」，keep blank at「Dial-up and Virtual Private network settings」, then click「LAN Settings」.
ZigBee Server User Guide
8
ZigBee Server User Guide
9
d. Make sure this page is blank and click「ok」. Once more「ok」to escape.
ZigBee Server User Guide
10
3.3 Log in ZS211H Web：
a. Open Internet Explorer , key in address 192.168.0.100 then「Enter」.
b. When you see ZS211H home page，select「Setup Server」.
Login ID : admin，Password：admin，click「Login」，you will enter ZS211H setting page.
。
ZigBee Server User Guide
11
ZigBee Server User Guide
12
c. ZS211H setting page。
ZigBee Server User Guide
13
3.4 Web UI :
a. Main mannual : Setting、MESH Network、I/O Ports、Alert、Maintenance
b. Sub mannual : You may key in or select proper features.
ZigBee Server User Guide
14
3.5 Features
a. Setting
System : Setting ZS211H device name，date & time，etc…
ZigBee Server User Guide
15
Network : Ethernet setting，IP，DNS，HTTP Port etc…
ZigBee Server User Guide
16
Users :
Update or modify administrator ID & Password。
Register new User and password to joint.
b. MESH Network
ZigBee Server User Guide
17
PAN Setting : input or modify ZigBee network setting.
ZigBee Server User Guide
18
Node Setting :
Update or modify ZigBee Node setting。
Update or modify ZigBee Node Service setting。
c. I/O Ports
ZigBee Server User Guide
19
GPIO :
GPIO :
Input Pin Alert’s input level setting。
Output Pin Alert’s input level setting。
ZigBee Server User Guide
20
RS485 : RS485 interface setting, and settings of Baud Rate，Work Mode，Data Bit，Stop Bit，Parity Check，Terminator。
d. Alert
ZigBee Server User Guide
21
Setting triggering devices for Service Alert.
e. Maintenance
ZigBee Server User Guide
22
Display hardware version of ZS211H .
Provide update input of system program and coordinator’s firmware
Operation Mode
ZigBee Server User Guide
23
Show all Services which are set Enable. User can operate them from display panel.
3.6 Hardware rest
At rear panel of ZH211H, there is a hardware reset key. Short press once will enforce ZH211H back to default IP address, IP
(192.168.0.100). Press longer than 3 seconds, ZH211H will retrieve all system default settings and restart automatically.
ZigBee Server User Guide
24
Appendix
Federal Communications Commission (FCC) Statement
You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s
authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
Operation is subject to the following two conditions:
1) this device may not cause interference and
2) this device must accept any interference, including interference that may cause undesired operation of the device.