Amana Quiet Zone 18M23Tb Users Manual
7M11TA-P1214602R 7M11TA-P1214602R AMANA 7,000 BTU ROOM AIR CONDITIONER - Manuals and Guides L0807341 View the owners manual for your AMANA 7,000 BTU ROOM AIR CONDITIONER #7M11TAP1214602R. Home:Heating & Cooling Parts:Amana Parts:Amana 7,000 BTU ROOM AIR CONDITIONER Manual
AMANA Air Conditioner Room (42) Manual L0807341 AMANA Air Conditioner Room (42) Owner's Manual, AMANA Air Conditioner Room (42) installation guides
18M23TB to the manual 6715d49d-60a6-4013-8b59-44ff9539efbf
2015-02-04
: Amana Amana-Quiet-Zone-18M23Tb-Users-Manual-361087 amana-quiet-zone-18m23tb-users-manual-361087 amana pdf
Open the PDF directly: View PDF 
.
Page Count: 8
| Download | |
| Open PDF In Browser | View PDF |
Quiet Zone
Room Air Conditioner
Use And Care
Manual
Contents
Electrical
Requirements
........................................
2
Electrical Grounding Instructions.................................. 2
Safety Features
......................................................
2
Compressor Lockout ..................................................... 2
Low Voltage Protection .................................................. 2
Advantages
of Amana's
Electronic
Controls
....... 2
Operation
................................................................
3
Vent Control ................................................................... 3
Unit Control .................................................................... 3
General
Information
..............................................
6
Changing Air Flow Direction .......................................... 6
Air Flow Around Unit ...................................................... 6
Care and Maintenance
..........................................
6
Air Filter ......................................................................... 6
Before Calling For Service
...................................
7
Fan Motor ....................................................................... 7
Slide out Chassis ........................................................... 7
Model
Identification
..............................................
8
Any Questions?
......................................................
8
As an ENERGY STAR ® partner, AMANA
APPLIANCES has determined that models
5M 11TA, 5M 11TB, 7M 11TA, and 18M23TB meet the ENERGY STAR ®
guidelines
Please read this Use and Care Manual thoroughly. This
manual provides proper maintenance information for maximum benefit of the features selected.
for energy
efficiency.
WARNING
To avoid death,
personal
injury or
property damage due to overheating, do
not leave this room air conditioner
unattended when used as cooling or life
support for persons or animals unable to
reactto unit failure. Take precautions to
warn
or guard
against
such
an
occurrence.
_
RECOGNIZE
THIS SYMBOL
AS A SAFETY
PRECAUTION
April 2000
Electrical
Requirements
Safety Features
This room air conditioner is equipped with an electronic
control to improve comfort and ensure reliability.
Electrical Grounding Instructions
This appliance is equipped with a three-pro ng grounding plug
fer protection against possible shock hazards. Ifatwe-prong
wall receptacle is encountered, the customer is required to
contact a qualified electrician and have the two-prong wall
receptacle replaced with a properly grounded three-prong
wall receptacle in accordance with the National Electrical
Code.
Compressor Lockout
To extend the life of the compressor a three minute time
delay will occur when:
Electrical power is first supplied to the unit
The thermostat is turned down immediately after the
compressor stops running,
Room air conditioners are designed to operate according to
requirements on the nameplate and as shown in Table 1.
Fuse or circuit breaker ratings must be according to the fuse
instruction label and as shown in Table 1. Do not plug
models marked "Use on Single Outlet Circuit Only" into a
circuit with another appliance or light fixture.
i
The Fan Control is quickly turned from FAN ONLY to
COOLING mode or vice versa.
Low Voltage Protection
This unit is equipped with "brownout" protection. In case
of an extreme brownout, the Amana control will interrupt
power to the unit to prevent compressor failure. When the
line voltage reaches at least 100 VAC, the control will reenergize your unit.
_i
WARNING
To avoid death, personal injury or property
damage due to electrical shock, this unit
must be grounded.
Do not under any
circumstances
cut or remove the round
Note: A compressor lockout will occur after the unit is reenergized.
grounding prong from the plug. Do not use
a two-prong adapter.
WARNING
To avoid death, personal inju ry or property
damage due to electrical shock, do not use
an extension
cord. Do not pinch the power
cord. Do not remove the warning tag from
the power cord.
,Digital Temperature Setting
Unit Plug Type
Receptacle
Required
Circuit Rating,
Breaker or
Time
Delay
Voltage Rating
On Unit Nameplate
- Temperature
increments
can be set from 60°F to 90°F in I°F
Fuse
,Digital Temperature
(_
NEMA No 5-15P
125V-15AMP
115V
230/208V rated
NEMA No 6-15R
250V-20AMP
NEMA No 6-20R
-
Shows desired temperature setting in other modes
12 amperes but not more
than 16 ampf_res
230/208V rated
at 24 amperes or Eess
NEMA No 6-30P
in FAN ONLY
,TempAsure ®Thermostat
-
250V=30AMP
room temperature
- The unit remembers the last settings used when
last turned on.
230/208V rated over
NEMA No 6-20P
Shows indoor
mode
,Computer Memory that Remembers
at 12 amperes or less
NEMA No 6-15P
-
NEMA No 5=15R
250V-15AMP
Display
Maintains set temperature
mum comfort
within 1.5°F for maxi-
,Smart Cool
NEMA No 6-30R
,Energy Saver with TempAsure ®air sampling
,Delay Timer
Table 1
2
Operation
Vent Control
ENERGY
SAVER (HIGH,
mode provides
mostENERGY SAVER
MED andthe
LOW)
energy efficient use of your room air conditioner. In ENERGYSAVERmode,
thefanstopswhenthe
compressor stops cooling. This feature can be used with
SMART COOL or cooling with any fan speed.
O pen or close the vent by sliding the vent control lever to the
appropriate setting.
EXHAUST - This setting opens the vent to move indoor air
out.
Note: To conserve energy, the unit should be set to the
FAN ONLY mode when using this setting.
CLOSED - In this position the vent is closed and room air is
recirculated and filtered. This position should be used for all
normal cooling operations (see underlined cooling options
on control panel).
Unit Control
Control
[_
Amana's new air sampling system works to maintain set
temperature within 1.5°F while in ENERGY SAVER mode.
Approximately every 5 minutes the fan will turn on and
"sample" the room air to determine if cooling is needed. If the
room is cool enough, the fan will cycle off. If the room needs
further cooling, the corn pressor will start along with the fan
until the set temperature is reached.
ENERGY SAVER has a soft start fan feature. This feature
starts the fan in low speed to reduce noise.
FANset
ONLYFANwithout
ONLY circulates
room
air at
the
fan speed
cooling. This
feature
can be turned off by pressing the FAN ONLY,
the SMART COOL, or the ENERGY SAVER button. Indoor
temperature is displayed in FAN ONLY mode.
Panel
OFF - Completely shuts off the unit.
SMART COOL-
SET Temperature
crease
or decrease the
- These
set temperature.
key pads in-
SMART COOL adjusts the
temperature.
Theunit
SMART
COOL the
feature
uses
fan speed of the
to achieve
selected
computer logic to cool the room quickly and
quietly. The fan speed starts on high, automatically switches
to medium, and finally goes to low as the room temperature
nears the set temperature.
-LOW
These
three
buttons
used
to
FAN,
MED
FAN, are
HIGH
FAN
select either a low, medium or high
fan speed to cool. If FAN ONLY is selected these buttons
change fan speed without cooling. Selecting the fan speed
starts normal cooling.
of
delaying
the start
or shut
down of
the air
DELAY
TIMERThisup
button
provides
a means
conditioner from 1 to 24 hours from the present
time. After setting the delay timer, the displayed time will
countdown to unit start or stop, See next page for details,
__
[_
_
_sriogmhetnme:dAsdlU_stiFp/atybeght.
ness can be changed using the "up" or "down" keypad. To
decrease brightness, simultaneously press and hold OFF
pad with "down" arrow. To increase brightness, simultaneously press and hold OFF pad with "up" arrow.
DELAY START OPERATION
Note: Changes can be made only while display is flashing.
You wilt have 5 seconds between each temperature,
operating mode, and fan speed setection. If a setecdon is not made dudng this time frame, the unit will setect the default
and proceed to the next step: Setting the delay time. If you wish to reset a missed selection, press the DELAY TIMER
button and begin again.
Procedure
1 Turn
the unit off.
Button
_FF
Display Indicator
_
'_1 Press the DELAY
L, TIMER button.
/i/
t
The current temp{ rature setting will flash,
3Select
the desired
temperature,
V SET/k1
r
=
• Display and selected setting lights will flash.
The display will show the current temperature
setting.
operating mode, and
fan speed.
Press the DELAY
TIMER button.
l/ME°'
TIM
ELAY_
• The current delay time will flash.
5Change
the delay
time, if desired.
Note:
Gs_A
1
The minimum setting for the timer is 1 hour
Press the DELAY
TIMER button to start
the time or select
TIM_
DELAY\
nothing and the unit
will start automati-
• The display will show the countdown time to
activation.
cally.
4
DELAY STOP OPERATION **
Procedure
1 With
unit
Button
Display Indicator
running,
press button.*
the DELAY
TIMER
X\
BE_
1
_//I
/ /ill//'
iF
Display flashes.
.\
Change
the delay
time, if desired.
\,/,/./
\\/,/i_
/,/,i-\
/,/,i-\
V s_
Press the DELAY
_,_TIMER button to start
the time or select
nothing and the unit
will start automatically.
The display shows the countdown hours.
70 cancel,
press the
DELAY TIMER or
OFF button
*A setting must be selected within a 5-second tim e period, while flashing, or the unit will select the default as the new setting.
**If there is no loss of power, the unit will keep the last setting.
Note: If a power failure occurs, the last delay settings will be lost and the default setting will be active.
3. If using concentrated
water first.
General
liquid detergent, dilute in warm
4. Do not use abrasive cleaners such as Comet TM, Ajax TM,
etc. These items can scratch, crack, and discolor surfaces.
Information
Changing Air Flow Direction
Adjust horizontal baffles for directing air up or down
Oceanside or Corrosive Environment
Adjust vertical baffles with handle to direct air left or
right
Salt air or a corrosive environment maygreatly reduce the life
of the unit. After cleaning, sand and repaint any scratches
or blisters on painted surfaces. In humid areas where algae
formation is common, place an algaecide tablet in outdoor
side of unit base pan.
VERTICAL BAFFLE
CONTROL
Air Filter
The front contains a removable grille that provides easy
access to the air filter. Thefilter can be removed twoways:
Air Flow Around Unit
Check indoor grille and outdoor louvers for air flow obstructions. Do not block airflow to and from unit. The outdoorcoil
should be checked and periodically cleaned for debris that
METHOD ONE:
Grasp the filter handle and slide the filter to the left until
it clears the unit.
INDOOR
GRILLE
may collect and block unit air flow. If air flow is obstructed or
deflected back into unit, the compressor may cycle on and
off rapidly, causing early compressor failure.
Care
--
_k
and Maintenance
WARNING
To avoid death or personal injury due to
electrical shock, turn fan control off and
unplug power cord before cleaning
or
performing maintenance.
After cleaning or
performing maintenance, reconnect power.
Note: The unit should be inspected by an authorized servicer
once a year to ensure proper function of the unit.
1. Once a year, remove chassis from outer case and
thoroughly clean air conditioner.
2. Wash air conditioner with warm, soapywater as needed.
Rinse and dry thoroughly.
6
METHOD
TWO:
NOTE: A charcoal air purification filter accessory is available that reduces smoke, odor, pollen, and fine dust particles. See your store dealer for details or call Amana at 1800-843-0304.
1.Removethefrontgrille.
Slidethegrilletotheleftuntilitclearstheunitclipsand
pullout,
2.Graspthefilterhandleandslidethefiltertotheleftuntil
it clearsthe unitclipsandpullout.
IMPORTANT NOTE: A dirty air filter reduces operating
efficiency. Inspect filter at least once every week during
operation.
Clean filter with a vacuum cleaner or warm,
soapy water. Thoreughly dry filter before replacing. Do net
operate unit without filter.
Fan Motor
Fan motor is permanently lubricated so there is no need to
oil motor.
Slide out Chassis
Some models feature a slide out chassis for easier installation. Refer to Installation Instructions provided with unit
for details on removing chassis from outer case,
Reinstall air filter by reversing above procedure.
II
II
II
II
II
II
II
II
II
II
II
II
II
II
II
II
II
II II
II
O O e
O O O e
O O e
O O e
O O O e
Before Calling
Difficulty
Possible
O O e
O O O e
O O e
O O O e
O O e
O O O e
O O e
O O e O
For Service
Cause
Air conditioner will not operate. No power to unit.
Suggested
Solution
Set fan control to position other than off.
Confirm power cord is plugged in,
Check fuse or circuit breaker.
Little or no cooling.
Compressor lockout on initial plug-in
Wait 3 to 4 minutes and recheck compressor.
Dirty air filter,
Air conditioner undersized for
Clean air filter,
application,
Check with dealer to determine proper unit
sapacity for application,
Power interruption or changing unit
settings.
Let fan run, Compressor will automatically
"estart in approximately 3 to 4 minutes.
Loose parts,
Tighten any loose parts.
Weak building construction.
_rovide additional support.
Water hitting fan blade.
Normal in high humidity.
Mounting support cannot be
installed.
Storm window frame has been
installed into window.
Some models require the window sill to be
adapted to accept the mounting support.
Refer to Installation Instructions provided with
he unit for details.
Odors in cooling.
Mold, mildew or algae formation on
wet surfaces.
_lace algaecide tablet in base pan.
Water in base pan.
Water in base pan is picked up by
lhe fan blade and thrown onto the
warm outdoor coil where the water
Normal in high humidity
Noisy unit.
lhen evaporates.
7
O
Model
Identification
Any Questions?
Complete enclosed registration card and promptly return
card to Amana's Product Registration department. If registration card is missing, call Amana's Consumer Information Line, (1-800-843-0304).
Most of your questions can be answered by your local
Amana dealer. Check with your dealer first if you need any
further information regarding the operation, maintenance,
or service of your unit. Then, if you should have any matters
which are not resolved locally, or if you would like information on other heating and cooling products or kitchen
appliances offered by Amana - please call us:
When contacting Amana, provide product information. Locate product information on the nameplate, found underneath front grille. Record the following information:
Model Number:
Manufacturing Number:
Amana Toll-Free
Serial or S/N Number:
1-800-843-0304
INFORMATION LINE
_
CONSUMER
Date of purchase:
(Not a technical assistance line for dealers.)
Dealer's name and address:
Asure _r_Extended Service Plan
Keep a copy of sales receipt for future reference or in case
warranty service is required. If something is operating
incorrectly, read "Before Calling for Service" section.
EXTEND_
SERVICE
PLAN
Amana is pleased to offer long-term service protection on
this new room air conditioner. Asure TM Extended Service
Plan is specially designed to supplement Amana's strong
warranty. Asure TM provides budget-protecting coverage
on room air conditioner for up to five full years and includes
parts, labor, and travel charges.
A participating Amana dealer has details or contact:
Amana Appliances
ConsumerAffairs
Department
Amana, lA 52204
1-800-528-2682
Part No.20058004(1)
Pnntedin U.S.A.
8
©2000Amana
2800 220th Trail
Amana, Iowa 52204
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.2 Linearized : No Page Count : 8 Page Layout : SinglePage Page Mode : UseNone Producer : Goby Monitor Application version 4, 0, 0, 13 Create Date : Wed Jul 30 04:14:24 2008 Author : Title : Subject :EXIF Metadata provided by EXIF.tools