Amazon com Services 1731 HDMI Digital Media Receiver User Manual
Gillon UK LLC HDMI Digital Media Receiver
User Manual
User Manual
Device Setup
1. Connect your device
Connect one end of the USB cable into your device and the other end into the power adapter.
Plug your device into the HDMI port on your TV, then plug the power adapter into a nearby
outlet. Turn on your TV, then select the appropriate HDMI input.
2. Complete the on-screen setup
Using your Remote, follow the on-screen instructions.
• Choose a language from the list.
• Select your Wi-Fi network from the networks displayed on the screen.
Note: If your Wi-Fi network is password protected, have your Wi-Fi network password handy to
connect your device to the Internet. If your network is hidden, select the “Join Other Network”
tile from the list. If required, enter your network password using the on-screen keyboard.
Registering your device
If you purchased your device online using your account, it is already registered to you.
If you received your device as a gift or it is not yet registered, please follow the on-screen
instructions to register your device.
Product Specifications
Model Number: LDC9WZ
Electrical Rating: 5.0V ⎓ 1.8A
Operating Temperature: 0-35°C
FCC Compliance
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications that are not expressly approved by the party responsible for
compliance could make the device no longer comply with the FCC Rules.
The output power of the radio technology used in the Products is below the radio frequency
exposure limits set by the FCC. This device should be installed and operated with at least 20cm
between the radiator and your body.
Information on your Device is on file with the FCC and can be found under the Display Grant
section of http://transition.fcc.gov/oet/ea/ after searching on the FCC ID for your Devices, which
can be found on the side of the device and the battery compartment of the remote.