Amazon com Services 4639 Tablet PC User Manual
Blancopage LLC Tablet PC
User Manual
User Guide
Quick Start Guide
WHAT’S IN THE BOX
• Device
• Power adapter
• USB Cable
CONNECTING DEVICE
1. To turn on your Device, press and release the power button. To put it in sleep mode, press
and release the power button.
2. To turn off your Device, press and hold the power button until a message displays asking if
you want to shut down.
3. Your Device will be partially charged when you receive it. To charge your Device, connect
one end of the USB cable into your and the other end into the power supply (included).
4. Connect the power supply into a nearby power outlet.
CONNECTING DEVICE TO YOUR HOME NETWORK
Tap the Quick Settings icon located on the Status bar to display settings for the most commonly
performed tasks
Select Wireless Network to toggle wireless on or off, display a list of detected Wi-Fi networks, add a
network, and access advanced wireless settings.
REGISTERING YOUR DEVICE
To use many of the Device features, you must register it to your account. If you have not yet registered,
please do so now. Prior to registering, connect to a Wi-Fi network by tapping the Quick Settings icon at
the top of the Device, then Wi-Fi. Select the network you want to use. Once you are connected, tap the
Quick Settings icon, then More, and select the My Account option to register.
IMPORTANT PRODUCT INFORMATION
For safety, compliance, recycling, and other important information regarding your Device, please refer
to the Legal & Compliance section on the Settings menu of your Device.
Product Information
Safety and Compliance Information
Using Your Device Around Other Electronic Devices
The Device, uses, and can radiate radio frequency (RF) energy and, if not used in accordance with its
instructions, may cause interference to radio communications and electronic equipment. External RF
signals may affect improperly installed or inadequately shielded electronic operating systems,
entertainment systems, and personal medical devices.
While most modern electronic equipment is shielded from external RF signals, if in doubt, check with
the manufacturer. For personal medical devices (such as pacemakers and hearing aids), consult with
your physician or the manufacturer to determine if they are adequately shielded from external RF
signals.
There are some places where RF signals could constitute a hazard, such as health care facilities, and
construction sites. If you are not sure, look around for signs indicating that two-way radios or mobile
phones should be turned off.
FCC Compliance Information
Radio Frequency Information
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications that are not expressly approved by the party responsible for compliance could
make the device no longer comply with the FCC Rules.
Information on your device is on file with the FCC and can be found by inputting your device’s FCC ID,
which can be found on the back of Device, into the FCC ID Search form available at
transition.fcc.gov/oet/ea/fccid.
Information Regarding Exposure to Radio Frequency Energy
The output power of the radio technology used in the Device is below the radio frequency exposure
limits set by the FCC. Nevertheless, it is advised to use the Device in such a manner that minimizes the
potential for human contact during normal operations.
Recycling Product Properly
In some areas, the disposal of certain electronic devices is regulated. Make sure you dispose of or
recycle the Products in accordance with your local laws and regulations.
Product Specifications
Model #: SX034QT
Ports: Micro-USB, Audio port
Power — 5V 1A output power adapter (sold in-box)
Connectivity — Dual Band Wi-Fi (2.4/5 GHz); 802.11 a/b/g/n; BT 3.0, BT 4.1LE
Operating temperature — 0 °C to 35 °C