Ambient Ambient Weather WS01T Wireless Night Light Thermometer User Manual WS 01T

Ambient, LLC dba Ambient Weather Wireless Night Light Thermometer WS 01T

User manual

Version 1.0 ©Copyright 2015, Ambient LLC. All Rights Reserved. Page 1 Ambient Weather WS-01T Color Changing Wireless Temperature Night Light with Ambient Backlight User Manual Table of Contents 1Introduction...............................................................................................................................22Getting Started ..........................................................................................................................22.1Parts List...........................................................................................................................22.2Recommend Tools............................................................................................................22.3Thermometer Sensor Set Up ............................................................................................32.4Night Light Power Up......................................................................................................52.5Battery Replacement ........................................................................................................62.6Display Console Layout...................................................................................................73Night Light Operation...............................................................................................................83.1Quick Display Mode ........................................................................................................83.2Set (Program) Mode.........................................................................................................83.4Sensor Search Mode.......................................................................................................123.5Best Practices for Wireless Communication ..................................................................123.6Min/Max Mode ..............................................................................................................133.7Manually Turn the Backlight On and Off.......................................................................133.8Adjustment or Calibration..............................................................................................143.9Temperature Calibration.................................................................................................144Personalizing Color Ranges....................................................................................................145Glossary of Terms ...................................................................................................................156Specifications..........................................................................................................................156.1Wireless Specifications ..................................................................................................156.2Measurement Specifications...........................................................................................156.3Power..............................................................................................................................157Troubleshooting Guide............................................................................................................168Liability Disclaimer ................................................................................................................179FCC Statement........................................................................................................................1710Warranty Information .........................................................................................................1811Battery Safety Information.................................................................................................19
Version 1.0 ©Copyright 2015, Ambient LLC. All Rights Reserved. Page 2 1 IntroductionThank you for your purchase of the Ambient Weather WS-01T Color Changing Wireless Temperature Night Light with Ambient Backlight. The following user guide provides step by step instructions for installation, operation and troubleshooting. To download the latest manual and additional troubleshooting tips, please visit: http://ambientweather.wikispaces.com/ws01t 2 GettingStartedNote: The power up sequence must be performed in the order shown in this section (insert batteries in the remote transmitter(s) first, power up the night light second). The unit consists of a display console (receiver), and a thermometer (remote transmitter). 2.1 PartsList1 Night Light Frame Dimensions (LxHxW): 2.6 x 2.3 x 2.4 in LCD Dimensions (LxW): 1.9 x 1.9 in 1 Thermometer transmitter (FT007T) Dimensions (LxHxW): 4.5 x 2.0 x 0.75in 1 CR2032 Battery 1 Manual 2.2 RecommendToolsHammer and nail for hanging remote thermometer transmitter.
Version 1.0 ©Copyright 2015, Ambient LLC. All Rights Reserved. Page 3 2.3 ThermometerSensorSetUp1. Remove the battery door on the back of the sensor by removing the set screw, as shown in Figure 1. Figure 1 2. BEFORE inserting the batteries, locate the dip switches on the inside cover of the lid of the transmitter. Figure 2 displays all four switches in the OFF position (factory default setting). Figure 2 3. Channel Number: The WS-01T supports up to eight transmitters. To set each channel number (the default is Channel 1), change Dip Switches 1, 2 and 3, as referenced in Table 1. 4. Temperature Units of Measure: To change the transmitter display units of measure (°F vs. °C), change Dip Switch 4, as referenced in Table 1.
Version 1.0 ©Copyright 2015, Ambient LLC. All Rights Reserved. Page 4 DIP SWITCH 1 2 3 4 FUNCTION DOWN DOWN DOWN --- Channel 1 DOWN DOWN UP --- Channel 2 DOWN UP DOWN --- Channel 3 DOWN UP UP --- Channel 4 UP DOWN DOWN --- Channel 5 UP DOWN UP --- Channel 6 UP UP DOWN --- Channel 7 UP UP UP --- Channel 8 --- --- --- DOWN °F --- --- --- UP °C Table 1 5. Insert two AAA batteries. 6. After inserting the batteries, the remote sensor LED indicator will light for 4 seconds, and then flash once per 60 seconds thereafter. Each time it flashes, the sensor is transmitting data. 7. Verify the correct channel number (CH) and temperature units of measure (°F vs. °C) are on the display, as shown in Figure 3. Figure 3 (1) temperature (2) temperature units (°F vs. °C) (3) channel number 8. Close the battery door. Make sure the gasket (around the battery compartment) is properly seated in its trace prior to closing the door. Tighten the set screw.
Version 1.0 ©Copyright 2015, Ambient LLC. All Rights Reserved. Page 5 2.4 NightLightPowerUp1. Move the remote thermometer(s) about 5 to 10’ away from the night light (if the sensor is too close, it may not be received by the night light). If you have more than one transmitter, make sure they are all powered up and transmitting on different channels. 2. Plug the night light into the wall outlet. Watch for the backlight to change colors. Indoor Temperature will be displayed after AC ON is displayed temporarily in the time field. 3. Release the Pull Tab to energize the back-up battery, as shown in Figure 4. 4. The console will instantly display indoor temperature. The remote temperature will update on the display within a few minutes on the appropriate channel. While in the search mode, the remote search icon will be constantly displayed. If you have more than once remote sensor (up to eight remotes are supported), the display will automatically toggle between sensors until all sensors have reported in. Do not touch any buttons until the remote sensor has reported in, or the radio search icon is no longer on, otherwise the remote sensor search mode will be terminated. When the remote sensor temperature has been received, the console will automatically switch to the normal mode, and all further settings can be performed.
Version 1.0 ©Copyright 2015, Ambient LLC. All Rights Reserved. Page 6 Figure 4 2.5 BatteryReplacementTo replace the battery, push the battery release tab with one finger and pull the battery holder with a second finger, as shown in Figure 5 A and B. Insert the new battery (+ terminal up, as shown in Figure 5 C). Push the battery holder into the night light. Note: The battery door mechanism prevents small children from accessing the battery compartment. Warning: Keep the battery away from children. If infant happens to swallow the battery, consult a doctor immediately.
Version 1.0 ©Copyright 2015, Ambient LLC. All Rights Reserved. Page 7 A B C Figure 5 2.6 DisplayConsoleLayoutNote: The following illustration shows the full segment LCD display for description purposes
Version 1.0 ©Copyright 2015, Ambient LLC. All Rights Reserved. Page 8 only and will not appear like this during normal operation. 1. Indoor temperature icon 2. Outdoor temperature icon (CH 1-8) 3. Min/Max reset (clears daily) 4. Temperature units (°F or °C) 5. Temperature display 6. Time alarm icon 7. Time display 8. TIM icon (backlight timer option) 9. CNT icon (backlight control option) 10. Transmitter Low power indicator 11. Scroll mode (CH 1-8) Figure 6 3 NightLightOperationNote: The night light has three keys for easy operation: SET key, CH/+ key and MIN/MAX/- key. 3.1 QuickDisplayModeWhile in Normal Mode, press (do not hold) the SET key to enter the Quick Display Mode as follows: • Once for time/week • Twice for date. • Three times for time alarm • Four times for time/second 3.2 Set(Program)ModeWhile in Normal Mode, press and hold the SET key for at least three seconds to enter the Set
Version 1.0 ©Copyright 2015, Ambient LLC. All Rights Reserved. Page 9 Mode. The first setting will begin flashing. You can press the SET key again to skip any step, as defined below. Note: In the Set mode, press the [CH/+] key or [MINMAX/-] key to change or scroll the value. Hold the [CH/+] key or [MINMAX/-] key for three seconds to increase/decrease rapidly. Note: In Set mode, to enter the normal mode, complete all set mode operations or wait 30 seconds for timeout. 1. 12/24 Hour Format (default: 12h):. Press the [CH/+] key to change between 12 hour and 24 hour format. 2. Change Hour. Press the SET key again to set the hour. Press the [CH/+] key or [MINMAX/-] key to adjust the hour up or down. Note the PM icon is present during afternoon hours. 3. Change Minute. Press the SET key again to set the minute. Press the [CH/+] key or [MINMAX/-] key to adjust the minute up or down. 4. Date Format (default: MM-DD): Press the SET key again to enter the day/month format mode. Press the [CH/+] key to switch between DD-MM-YY and MM-DD-YY. 5. Change Month. Press the SET key again to set the calendar month. Press the [CH/+] key or [MINMAX/-] key to adjust the calendar month. 6. Change Day. Press the SET key again to set the calendar day. Press the [CH/+] key or [MINMAX/-] key to adjust the calendar day. 7. Change Year. Press the SET key again to set the calendar year. Press the [CH/+] key or [MINMAX/-] key to adjust the calendar year. 8. Time Alarm Hour. Press the SET key again to set time alarm hour. Press the [CH/+] key or [MINMAX/-] key to adjust the hour up or down. While the alarm value is flashing, press and hold the SET button for three seconds to turn the alarm on and off. The time alarm icon will appear when set, and disappear when disabled. Press (do not hold) the SET key to advance to the next setting. 9. Time Alarm Minute. Press the SET key again to set time alarm minute. Press the [CH/+] key or [MINMAX/-] key to adjust the minute up or down. While the alarm value is flashing, press and hold the SET button for three seconds to turn the alarm on and off. The time alarm icon will appear when set, and disappear when disabled. Press (do not hold) the SET key to advance to the next setting. 10. Temperature Units of Measure (default: °F):. Press the SET key again to change the temperature units of measure (the UNITSET icon will be displayed). Press the [CH/+] key to switch between °F and °C units of measure. 11. Max/Min Clearing. Press the SET key again to set the max/min clearing mode (CLR ON/OFF). The Max/Min can be programmed to clear daily (at midnight) or manually. Press the [CH/+] key to switch between “Clears Daily” and Clears Manually. 12. Backlight Color Setting (default: Outdoor or CH1). Press the SET key again to set the backlight color defined parameter (the LED icon will be displayed). Press [CH/+] key or [MINMAX/+] key to toggle between OUT (uses the channel 1 temperature to automatically
Version 1.0 ©Copyright 2015, Ambient LLC. All Rights Reserved. Page 10 display backlight color), IN (uses the indoor temperature to automatically display backlight color) or USE (manually set your own backlight color to one of 11 choices). The following section is based on the OUT, IN or USE setting selected. 12.1 OUT Backlight Color Setting (reference Figure 7). 12.2 Outdoor Backlight Color Low (OUT default: 10): Press the SET key again to change the lower range of the color changing backlight spectrum (the LOWER icon will be displayed). Press the [CH/+] key or [MINMAX/+] key to adjust the low temperature limit. 12.3 Indoor Backlight Color High (default: 100): Press the SET key again to change the upper range of the color changing backlight spectrum (the UPPER icon will be displayed). 12.4 IN Backlight Color Setting (reference Figure 7). 12.5 Indoor Backlight Color Low (IN default: 58): Press the SET key again to change the lower range of the color changing backlight spectrum (the LOWER icon will be displayed). Press the [CH/+] key or [MINMAX/+] key to adjust the low temperature limit. 12.6 Indoor Backlight Color High (default: 85): Press the SET key again to change the upper range of the color changing backlight spectrum (the UPPER icon will be displayed). 12.7 USE Backlight Color Setting (reference Figure 7). 12.8 Backlight Color (USE): Press the SET key again to manually select the backlight color (the COLOR icon will be displayed). Press [CH/+] key or [MINMAX/+] key to choose among 11 different colors.
Version 1.0 ©Copyright 2015, Ambient LLC. All Rights Reserved. Page 11 The following table provides 11 different backlight colors for reference: No. Color (USE) Colors OUT Temp (°F) IN Temp (°F) Comments (Manually set maximum and minimum values) 0 Cold Purple <10 <58 LOW 1 Fuchsia 10‐20 58‐61 2 Purple 20‐30 61‐64 3 Blue 30‐40 64‐67 4 Aqua 40‐50 67‐70 5 Dark Green 50‐60 70‐73 6 Light Green 60‐70 73‐76 7 Yellow 70‐80 76‐79 8 Orange 80‐90 79‐82 9 Red 90‐100 82‐85 Color Increment = (HI-LOW)/9 10 Red Hot >100 >85 HI Note: This manual is not printed in color. To view the actual color chart, visit: http://site.ambientweatherstore.com/Manuals/ws01t.pdf to view the actual color. Note: Reference Section 4 Personalizing Color Ranges to modify the color changes to best suit your comfort level and location. Figure 7 13. Backlight Control Setting (default: ON). Press the SET key again to set the backlight color control option. Press [CH/+] key or [MINMAX/-] key to toggle between CNT (automatic light control sensing), TIM (manually set your own defined light time) or ON (light permanently ON). The following section is based on the CNT, ON or TIM setting selected. 13.1 In CNT mode, the icon will be displayed, and the backlight will automatically turn on when it is dark. The backlight will automatically turn off when it is light. 13.2 In TIM mode, the icon will be displayed, and the backlight will turn on at a specific
Version 1.0 ©Copyright 2015, Ambient LLC. All Rights Reserved. Page 12 time of day, and turn off after a time period has elapsed. (Default time: 5:00 PM, Default time period: 12h). 13.2.1 Press the SET key again to set the hour of the day the backlight will turn on . Press the [CH/+] key or [MINMAX/-] key to adjust the hour up or down. 13.2.2 Press the SET key again to set the minute of the day the backlight will turn on. Press the [CH/+] key or [MINMAX/-] key to adjust the minute up or down. 13.2.3 Press the SET key again to set the time period or length of time the backlight will be turned on. Press the [CH/+] key or [MINMAX/-] key to adjust the time period between 1 hour to 24 hours. 13.3 In ON mode, the backlight will light permanently. 14. Backlight Contrast: Press the SET key again to change the backlight brightness (the BRIGHT icon will be displayed). Press the [CH/+] key or [MINMAX/-] key to adjust the backlight contrast from 1 (dim) to 8 (bright). 3.3 ChannelSelectionPress the CH/+ button to switch the display between in, remote sensors 1 through 8, and scroll mode . In scroll mode, all of the indoor and detected outdoor sensors will be displayed in five second intervals. 3.4 SensorSearchModeIf any of the sensor communication is lost, dashes (--.-) will be displayed on the screen. To reacquire the signal: • If a specific channel is lost, press the CH/+ button to display this channel, then Press and hold the CH/+ button for 3 seconds, and the remote search icon will be constantly displayed for up to 3 minutes. Once the signal is reacquired, the remote search icon will turn off, and the current values will be displayed. • If new sensors are added, subtracted, or multiple sensor channels are lost, press the CH/+ button to display the IN Channel, then Press and hold the CH/+ button for 3 seconds, and the remote search icon will be constantly displayed for up to 10 minutes. Once the signal is reacquired, the remote search icon will turn off, and the current values will be displayed. 3.5 Best Practices for Wireless CommunicationWireless communication is susceptible to interference, distance, walls and metal barriers. We recommend the following best practices for trouble free wireless communication. 1. Electro-Magnetic Interference (EMI). Keep the console several feet away from computer monitors and TVs.
Version 1.0 ©Copyright 2015, Ambient LLC. All Rights Reserved. Page 13 2. Radio Frequency Interference (RFI). If you have other 433 MHz devices and communication is intermittent, try turning off these other devices for troubleshooting purposes. You may need to relocate the transmitters or receivers to avoid intermittent communication. 3. Line of Sight Rating. This device is rated at 300 feet line of sight (no interference, barriers or walls) but typically you will get 100 feet maximum under most real-world installations, which include passing through barriers or walls. 4. Metal Barriers. Radio frequency will not pass through metal barriers such as aluminum siding. If you have metal siding, align the remote and console through a window to get a clear line of sight. 3.6 Min/MaxModeThe Min/Max mode displays the minimum and maximum temperature (since reset of the unit) for the indoor temperature, and remote channels 1 through 8. Prior to entering the MIN/MAX mode, press the CHANNEL/+ button to select the temperature value you wish to view. 1. Display Maximum. Press the MIN/MAX/- key once to display the maximum. The MAX icon will be displayed. 2. Clear Maximum. To reset the maximum values to the current values, press and hold the CLEAR button for 3 seconds. 3. Display Minimum. Press the MIN/MAX/- key again to display the minimum. The MIN icon will be displayed. 4. Clear Minimum. To reset the minimum values to the current values, press and hold the CLEAR button for 3 seconds. To return to normal mode, press the MIN/MAX/- key again. 3.7 ManuallyTurntheBacklightOnandOffIn normal mode, press and hold MIN/MAX/- key for 3 seconds to turn on the backlight. LED ON will be displayed. Press and hold the MIN/MAX/- key again to turn off the backlight. LED OFF will be displayed. Depending on the backlight control mode, if the backlight is turned off manually, it will turn on again based on the following criteria: 1. In the LED CNT mode (automatic light control sensing), the light will turn on again when darkness is sensed. 2. In the LED TIM mode (manually set your own defined light time), the light will turn on again at the programmed time of day. 433.92MHz
Version 1.0 ©Copyright 2015, Ambient LLC. All Rights Reserved. Page 14 3.8 AdjustmentorCalibrationNote: The calibrated value can only be adjusted on the console. The remote sensor(s) always displays the un-calibrated or measured value. The purpose of calibration is to fine tune or correct for any sensor error associated with the devices margin of error. The measurement can be adjusted from the console to calibrate to a known source. Calibration is only useful if you have a known calibrated source you can compare it against, and is optional. This section discusses practices, procedures and sources for sensor calibration to reduce manufacturing and degradation errors. Do not compare your readings obtained from sources such as the internet, radio, television or newspapers. They are in a different location and typically update once per hour. The purpose of your weather station is to measure conditions of your surroundings, which vary significantly from location to location. The WS-01T supports up to eight remote sensors. Each of the eight sensors can be calibrated. 3.9 TemperatureCalibrationPrior to entering the calibration mode, press the CH/+ key to select the temperature you wish to adjust. To enter the temperature calibration mode, press and hold the SET and CH/+ keys at the same time for five seconds, and the temperature value will begin flashing. Press the CH/+ key to increase the temperature and the MIN/MAX/- key to decrease the temperature reading in 0.1° increments. To rapidly increase (or decrease) the temperature reading, press and hold the CH/+ or MIN/MAX/- key. To return the temperature to the actual or uncalibrated measurement, press the SET button. Once the displayed temperature equals the calibrated source, press and hold the SET button for three seconds, or wait 30 seconds for timeout, and the temperature value will stop flashing. 4 PersonalizingColorRangesYou can customize your background color ranges to suit your location, or personal preferences. For example, if you live in Alaska, your definition of hot and cold may be very different if you live in Arizona.
Version 1.0 ©Copyright 2015, Ambient LLC. All Rights Reserved. Page 15 Likewise, if you track your indoor comfort level, your comfort range may be very different than someone else. Example 1: I live in Arizona, and the temperature ranges from 20 °F to 110 °F. Color Increment = (HI-LOW)/9 = (110 – 20)/9 = 10 °F. Example 2: I live in Alaska, and the temperature ranges from -20°F to 70°F. Color Increments = (HI-LOW)/9 = (70 – (-20))/9 = 10 °F. 5 GlossaryofTerms Term Definition Accuracy Accuracy is defined as the ability of a measurement to match the actual value of the quantity being measured. Range Range is defined as the amount or extent a value can be measured. 6 Specifications6.1 WirelessSpecifications• Line of sight wireless transmission (in open air): 100m, 30m under most conditions. • Frequency: 433 MHz • Update Rate: 60 seconds 6.2 MeasurementSpecificationsThe following table provides specifications for the measured parameters. Measurement Range Accuracy Resolution Indoor Temperature -40 to 140 °F ± 1 °F 0.1 °F Outdoor Temperature -40 to 140 °F ± 1 °F 0.1 °F 6.3 Power• AC Voltage: 110 – 240V, 50 / 60 Hz • Console Power Consumption: 0.2 W (add 0.1 W for each sensor) • CR2032 Button Battery (200 mAh / 3V) • Remote sensor : 2 x AAA 1.5V Alkaline or Lithium batteries (not included) 433.92MHz
Version 1.0 ©Copyright 2015, Ambient LLC. All Rights Reserved. Page 16 • Battery life: Minimum 12 months for thermometer sensor (use lithium batteries in cold weather climates less than -4 °F) 7 TroubleshootingGuide Problem Solution The nightlight does not turn on. Check the night light control mode settings (Section 3.2)Wireless remote (thermometer) not reporting in to console. There are dashes (--.-) on the display console. If any of the sensor communication is lost, dashes (--.-) will be displayed on the screen. To reacquire the signal, press and hold the + button for 3 seconds, and the remote search icon will be constantly displayed. Once the signal is reacquired, the remote search icon will turn off, and the current values will be displayed. The maximum line of sight communication range is 300 feet and 100 feet under most conditions. Move the sensor assembly closer to the display console. If the sensor assembly is too close (less than 5 feet), move the sensor assembly away from the display console. Make sure the remote sensor LCD display is working and the transmitter light is flashing once per 60 seconds. Install a fresh set of batteries in the remote thermometer. For cold weather environments, install lithium batteries. Make sure the remote sensors are not transmitting through solid metal (acts as an RF shield), or earth barrier (down a hill). Move the display console around electrical noise generating devices, such as computers, TVs and other wireless transmitters or receivers. Move the remote sensor to a higher location. Move the remote sensor to a closer location. Temperature sensor reads too high in the day time. Make sure the thermometer is mounted in a shaded area. The pre preferred location is a north facing wall because it is in the shade most of the day. Indoor and Outdoor Temperature do not agree Allow up to one hour for the sensors to stabilize due to signal filtering. The indoor and outdoor temperature
Version 1.0 ©Copyright 2015, Ambient LLC. All Rights Reserved. Page 17 Problem Solution sensors should agree within 2 °F (the sensor accuracy is ± 1 °F). Use the calibration feature to match the indoor and outdoor temperature to a known source. Outdoor color does not change as expected. Make sure the outdoor sensor is assigned to Channel 1. 8 LiabilityDisclaimerPlease help in the preservation of the environment and return used batteries to an authorized depot. The electrical and electronic wastes contain hazardous substances. Disposal of electronic waste in wild country and/or in unauthorized grounds strongly damages the environment. Reading the “User manual” is highly recommended. The manufacturer and supplier cannot accept any responsibility for any incorrect readings and any consequences that occur should an inaccurate reading take place. This product is designed for use in the home only as indication of weather conditions. This product is not to be used for medical purposes or for public information. The specifications of this product may change without prior notice. This product is not a toy. Keep out of the reach of children. No part of this manual may be reproduced without written authorization of the manufacturer. Ambient, LLC WILL NOT ASSUME LIABILITY FOR INCIDENTAL, CONSEQUENTIAL, PUNITIVE, OR OTHER SIMILAR DAMAGES ASSOCIATED WITH THE OPERATION OR MALFUNCTION OF THIS PRODUCT. 9 FCCStatementStatement according to FCC part 15.19: This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. Statement according to FCC part 15.21: Modifications not expressly approved by this company could void the user's authority to operate the equipment.
Version 1.0 ©Copyright 2015, Ambient LLC. All Rights Reserved. Page 18 Statement according to FCC part 15.105: NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. 10 WarrantyInformationAmbient, LLC provides a 1-year limited warranty on this product against manufacturing defects in materials and workmanship. This limited warranty begins on the original date of purchase, is valid only on products purchased and only to the original purchaser of this product. To receive warranty service, the purchaser must contact Ambient, LLC for problem determination and service procedures. Warranty service can only be performed by a Ambient, LLC. The original dated bill of sale must be presented upon request as proof of purchase to Ambient, LLC. Your Ambient, LLC warranty covers all defects in material and workmanship with the following specified exceptions: (1) damage caused by accident, unreasonable use or neglect (lack of reasonable and necessary maintenance); (2) damage resulting from failure to follow instructions contained in your owner’s manual; (3) damage resulting from the performance of repairs or alterations by someone other than an authorized Ambient, LLC authorized service center; (4) units used for other than home use (5) applications and uses that this product was not intended (6) the products inability to receive a signal due to any source of interference or metal obstructions and (7) extreme acts of nature, such as lightning strikes or floods. This warranty covers only actual defects within the product itself, and does not cover the cost of installation or removal from a fixed installation, normal set-up or adjustments, claims based on misrepresentation by the seller or performance variations resulting from installation-related circumstances.
Version 1.0 ©Copyright 2015, Ambient LLC. All Rights Reserved. Page 19 11 BatterySafetyInformationWarning: Keep batteries away from children. If infant happens to swallow batteries, consult a doctor immediately. Never charge batteries. Charging batteries may cause battery electrolyte to seethe or battery internal pressure to rise. Leakage, heating, explosion or ignition of batteries may result. Do not heat or dispose of batteries in fire. Do not modify nor disassemble batteries. This may damage gaskets, and may cause ignition, heating, leakage or explosion. Insert batteries (+) (-) correctly. Erroneous insertion of batteries may result in battery short-circuiting depending on types of devices. Leakage, heating, explosion or ignition of batteries may result. In case of eye contact with battery electrolyte, immediately flush eyes thoroughly with water, do not rub the eyes, and consult a doctor. In case battery electrolyte comes into contact with the mouth, gargle and rinse thoroughly and consult a doctor immediately. Do not connect (+) and (-) of batteries by wire. Do not carry nor store batteries with metallic necklace or hairpin.

Navigation menu