Amcc 3Ware 9500S Users Manual CLI_Guide_Apache

2015-02-05

• Title Page
• Table of Contents
• Introduction to the 3ware Command Line Interface
  • Features of the CLI
  • Supported Operating Systems
  • Terminology
  • Installing the 3ware CLI
    • Installing the 3ware CLI on Windows
      • Permissions Required to Run CLI
    • Installing the 3ware CLI on Linux and FreeBSD
  • Working with 3ware CLI
    • Using the command interface interactively
    • Using a single command with output
    • Using an input file to execute a script
      • Scripting example
    • Outputting the CLI to a Text File
    • Conventions
  • Understanding RAID Levels and Concepts
    • RAID Concepts
    • Available RAID Configurations
      • RAID 0
      • RAID 1
      • RAID 5
      • RAID 6
      • RAID 10
      • RAID 50
      • Single Disk
      • JBOD
      • Hot Spare
    • Determining What RAID Level to Use
      • Using Drive Capacity Efficiently
      • Support for Over 2 Terabytes
• CLI Syntax Reference
  • Common Tasks Mapped to CLI Commands
  • Syntax Overview
  • Shell Object Commands
    • focus Object
    • show
    • show ver
    • show alarms [reverse]
    • show diag
    • show rebuild
    • show verify
    • show selftest
    • flush
    • rescan
    • commit
    • update fw=filename_with_path [force]
  • Controller Object Commands
    • /cx show
    • /cx show attribute [attribute ...]
    • /cx show driver
    • /cx show model
    • /cx show firmware
    • /cx show bios
    • /cx show monitor
    • /cx show serial
    • /cx show pcb
    • /cx show pchip
    • /cx show achip
    • /cx show numdrives
    • /cx show numports
    • /cx show numunits
    • /cx show ctlbus
    • /cx show exportjbod
    • /cx show spinup
    • /cx show stagger
    • /cx show ondegrade
    • /cx show autocarve
    • /cx show carvesize
    • /cx show memory
    • /cx show autorebuild
    • /cx show unitstatus
    • /cx show allunitstatus
    • /cx show drivestatus
    • /cx show all
    • /cx add type=<RaidType> disk=<p:-p> [stripe=Stripe] [noscan] [group=<3|4|5|6|7|8>] [nocache] [autoverify] [noqpolicy][ignoreECC] [name=string] [storsave=<protect|balance|perform>]
    • /cx rescan [noscan]
    • /cx commit
    • /cx flush
    • /cx update fw=filename_with_path [force]
    • /cx show alarms [reverse]
    • /cx show diag
    • /cx show rebuild
    • /cx show verify
    • /cx show selftest
    • /cx add rebuild=ddd:hh:duration
      • Setting Up a Rebuild Schedule
    • /cx add verify=ddd:hh:duration
      • Setting Up a Verify Schedule
    • /cx add selftest=ddd:hh
      • Setting Up a Selftest Schedule
    • /cx del rebuild=slot_id
    • /cx del verify=slot_id
    • /cx del selftest=slot_id
    • /cx set rebuild=enable|disable|1..5
    • /cx set verify=enable|disable|1..5
    • /cx set selftest=enable|disable [task=UDMA|SMART]
    • /cx set exportjbod=on|off
    • /cx set ondegrade=cacheoff|follow
    • /cx set spinup=nn
    • /cx set stagger=nn
    • /cx set autocarve=on|off
    • /cx set carvesize=[1024..2048]
    • /cx set autorebuild=on|off
    • /cx set autodetect=on|off disk=<p:-p>|all
    • /cx start mediascan
    • /cx stop mediascan
  • Unit Object Commands
    • /cx/ux show
    • /cx/ux show attribute [attribute ...]
    • /cx/ux show status
    • /cx/ux show rebuildstatus
    • /cx/ux show verifystatus
    • /cx/ux show initializestatus
    • /cx/ux show name
    • /cx/ux show serial
    • /cx/ux show qpolicy
    • /cx/ux show storsave
    • /cx/ux show identify
    • /cx/ux show autoverify
    • /cx/ux show cache
    • /cx/ux show ignoreECC
    • /cx/ux show volumes
    • /cx/ux show all
    • /cx/ux remove [noscan] [quiet]
    • /cx/ux del [noscan] [quiet]
    • /cx/ux start rebuild disk=p<p:-p...> [ignoreECC]
    • /cx/ux start verify
    • /cx/ux pause rebuild
    • /cx/ux resume rebuild
    • /cx/ux stop verify
    • /cx/ux flush
    • /cx/ux set autoverify=on|off
    • /cx/ux set cache=on|off [quiet]
    • /cx/ux set identify=on|off
    • /cx/ux set ignoreECC=on|off
    • /cx/ux set name=string
    • /cx/ux set qpolicy=on|off
    • /cx/ux set storsave=protect|balance|perform [quiet]
    • /cx/ux migrate type=RaidType [disk=p:-p] [group=3|4|5|6|7|8] [stripe=Stripe] [noscan] [nocache] [autoverify]
      • Migration Process
      • Example of splitting a mirror
      • Example of capacity expansion
      • Example of migrate output
  • Port Object Commands
    • /cx/px show
    • /cx/px show attribute [attribute ...]
    • /cx/px show status
    • /cx/px show model
    • /cx/px show serial
    • /cx/px show firmware
    • /cx/px show identify
    • /cx/px show ncq
    • /cx/px show lspeed
    • /cx/px show capacity
    • /cx/px show smart
    • /cx/px show all
    • /cx/px remove [noscan] [quiet]
    • /cx/px set identify=on|off
  • BBU Object Commands
    • /cx/bbu show
    • /cx/bbu show attribute [attribute ...]
    • /cx/bbu show status
    • /cx/bbu show batinst
    • /cx/bbu show lasttest
    • /cx/bbu show volt
    • /cx/bbu show temp
    • /cx/bbu show cap
    • /cx/bbu show serial
    • /cx/bbu show fw
    • /cx/bbu show pcb
    • /cx/bbu show bootloader
    • /cx/bbu show all
    • /cx/bbu test [quiet]
    • /cx/bbu enable
    • /cx/bbu disable [quiet]
  • Enclosure Object Commands
    • /ex show
    • /ex show attribute [attribute ...]
    • /ex show controllers
    • /ex show slots
    • /ex show fans
    • /ex show temp
    • /ex show all
    • /ex/slotx show
    • /ex/slotx show identify
    • /ex/slotx set identify=on|off
    • /ex/fanx show
    • /ex/tempx show
  • Help Commands
    • Help with specific commands
    • Help with attributes
    • help
    • help show
    • help flush
    • help rescan
    • help update
    • help commit
    • help focus
    • help /cx
    • help /cx/ux
    • help /cx/px
    • help /cx/bbu
    • help /ex
    • help /ex/slotx
    • help /ex/fanx
    • help /ex/tempx
  • Command Logging
  • Return Code