American Standard Cadet Elongated 14 Rough In Toilet 2898 014 Users Manual

: American-Standard American-Standard-Cadet-Elongated-14-Rough-In-Toilet-2898-014-Users-Manual-415877 american-standard-cadet-elongated-14-rough-in-toilet-2898-014-users-manual-415877 american-standard pdf

Open the PDF directly: View PDF .
Page Count: 1

K86

© 2008 AS America Inc.

NOTES:

THIS COMBINATION IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION

OF 356MM (14") FROM FINISHED WALL TO C/L OF OUTLET.

* DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.

SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED

SEPARATELY.

IMPORTANT: Dimensions of xtures are nominal and may vary within the range

of tolerance established by ANSI Standard A112.19.2

These measurements are subject to change or cancellation. No responsibility is

assumed for use of superseded or voided pages.

356mm

(14)

800mm

(31-1/2)

C/L OF OUTLET

133mm

(5-1/4)

FINISHED WALL

279mm

(11)

19mm ± 6mm

(3/4 ± 1/4)

381mm

(15)

470mm

(18-1/2)

C/L OF SEAT POST HOLES

140mm (5-1/2 CENTERS)

305mm

(12)

178mm

(7)

16mm

(5/8) FINISHED

FLOOR

762mm

(30)

241mm

(9-1/2)

152mm

(6)

495mm

(19-1/2)

222mm

(8-3/4)

SUPPLY

AS

REQ'D

381mm

(15)

*

To Be Specied:

❏ Color: ❏ White ❏ Bone ❏ Linen ❏ Silver

❏ Fawn Beige ❏ Black

❏ Seat: American Standard #5324.019 “Rise and

Shine” solid plastic closed front, seat with cover.

❏ Seat: American Standard #5311.012 “Laurel”

molded closed front seat with cover.

❏ Alternate Seat:

❏ Supply with stop:

CADET™

ELONGATED 14" ROUGH-IN TOILET

VITREOUS CHINA

CADET™ ELONGATED 14" ROUGH-IN TOILET

❑ 2898.014

• Vitreous china

• Low-consumption (6.0 Lpf/1.6 gpf)

• 14" roughing-in

• Elongated siphon action jetted bowl

• Fully glazed 2" trapway

• AquaForce ushing technology

• Close-coupled tank with raised lip detail on

tank cover

• Color-matched trip lever

• Speed Connect® tank/bowl coupling system

• Sanitary bar on bowl

• 2 bolt caps

• 100% factory ush tested

❑ 3459.016 Bowl

❑ 4114.016 Tank

Nominal Dimensions:

800 x 495 x 762mm

(31-1/2" x 19-1/2" x 30")

Fixture only, seat and supply by others

Alternate Tank Congurations Available:

❑ 4114.600 Tank complete with tank cover

locking device

❑ 4114.800 Tank complete with trip lever located

on right hand side

Compliance Certications -

Meets or Exceeds the Following Specications:

• ASME A112.19.2M for Vitreous China Fixtures -

includes Flush Performance, Ball Pass Diameter,

Trap Seal Depth and all Dimensions

Revised 2/08