American Standard Lucerne Wall Hung Lavatory 0356 066 Users Manual
0356.439 to the manual 97befc5b-5e98-46c5-9683-d1563fa7fb4a
2015-02-02
: American-Standard American-Standard-Lucerne-Wall-Hung-Lavatory-0356-066-Users-Manual-416538 american-standard-lucerne-wall-hung-lavatory-0356-066-users-manual-416538 american-standard pdf
Open the PDF directly: View PDF 
.
Page Count: 2
M23
© 2008 AS America Inc. Revised 8/05
To Be Specied:
❏ Colors: ❏ White ❏ Black
❏ Faucet*:
❏ Gooseneck Spout: 7522.055
❏ Faucet Finish:
❏ Knee Action Mixer: 7676.029
❏ Double Pedal Valve: 7679.012 (wall mounted)
❏ Grid Drain: 2411.015
❏ Trap:
❏ Nipple:
❏ Bracket Support (by others):
❏ Flex Tempered Supply (by others):
❏ Concealed Arms Support (by others):
❏ 6065161.002 Selectronic Valve (1.6 GPF Toilet)
* See faucet section for additional models available
LUCERNE™
WALL-HUNG LAVATORY
VITREOUS CHINA
LUCERNE™ WALL-HUNG LAVATORY
• Wall-hung sink
• Vitreous china
• Front overow
• “D” shaped bowl
• Self-draining deck area with contoured back
and side splash shields
• Faucet ledge
Both shown with 1340.000 metering faucet
(not included)
Single faucet hole on right:
❏ 0356.066 For exposed bracket support
❏ 0356.439 For wall hanger (included) or
concealed arms support
Nominal Dimensions:
521 x 464mm
(20-1/2" x 18-1/4")
Bowl sizes:
381mm (15") wide
254mm (10") front to back
171mm (6-3/4") deep
Compliance Certications -
Meets or Exceeds the Following Specications:
• ASME A112.19.2 for Vitreous China Fixtures
SEE REVERSE FOR ROUGHING-IN DIMENSIONS
MEETS THE AMERICANS WITH DISABILITIES ACT GUIDE-
LINES AND ANSI A117.1 ACCESSIBLE AND USABLE
BUILDINGS AND FACILITIES - CHECK LOCAL CODES.
Top of front rim mounted 864mm (34") from finished floor.
BARRIER FREE
M24
© 2008 AS America Inc.
LUCERNE™
WALL-HUNG LAVATORY
VITREOUS CHINA
114 mm
(4-1/2)
86 mm
(3-3/8)
203 mm
(8)
8 mm
(5/16)
464 mm
(18-1/4)
521 mm
(20-1/2)
13 mm
(1/2)
FINISHED
WALL
425 mm
(16-3/4)
102 mm
(4)
13mm x 51mm BRACKET
(1/2 x 2) SLOTS
349mm
(13-3/4)
57mm
(2-1/4)
44mm (1-3/4) DIA.
STD. OUTLET
25mm (1) DIA.
HOLES
35mm (1-3/8) DIA.
PUNCHING
102 mm
(4)
79 mm
(3-1/8)
425 mm
(16-3/4)
44 mm
(1-3/4)
38 mm
(1-1/2)
10mm (3/8)
DIA. ANCHOR
SCREW HOLES
206 mm
(8-1/8)
787mm (31)
864mm (34)
FINISHED
FLOOR
54mm (2-1/8) DIA.
HOLES FOR
CONCEALED ARMS
25 mm
(1)
267 mm
(10-1/2)
114 mm
(4-1/2)
27mm X 14mm
(1-1/16 x 5/16) SLOTS
S-9 HANGER
MEETS THE AMERICANS WITH DISABILITIES ACT GUIDE-
LINES AND ANSI A117.1 ACCESSIBLE AND USABLE
BUILDINGS AND FACILITIES - CHECK LOCAL CODES.
Top of front rim mounted 864mm (34") from finished floor.
NOTES:
PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS.
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
CONCEALED ARMS SUPPORT AND EXPOSED BRACKET SUPPORT AS
REQUIRED TO BE FURNISHED BY OTHERS.
IMPORTANT: Dimensions of xtures are nominal and may vary within
the range of tolerances established by ANSI Standard A112.19.2. These
measurements are subject to change or cancellation. No responsibility is
assumed for use of superseded or voided pages.
Revised 8/05
BARRIER FREE
