Amino Communications 50-0100-MC-20 High Definition IP TV receiver User Manual Amulet 650m

Amino Communications Ltd High Definition IP TV receiver Users Manual Amulet 650m

Contents

Users Manual (Amulet 650m)

Amulet 6mediA RecoRdeRQuick Start Guide
QUICK START GUIDEAMULET MEDIA RECORDER1COPYRIGHT©2016 Amino Communications Ltd. All rights reserved. This document contains proprietary information protected by copyright. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise, without the prior written consent of Amino Communications Ltd, Buckingway Business Park, Anderson Road, Swavesey, Cambridge, CB24 4UQ, United Kingdom.DISCLAIMERIF THIS PRODUCT DIRECTS YOU TO COPY MATERIALS, YOU MUST HAVE PERMISSION FROM THE COPY-RIGHT OWNER OF THE MATERIALS TO AVOID VIOLATING THE LAW WHICH COULD RESULT IN DAMAGES OR OTHER REMEDIES.TRADEMARKSAmino and connecting the home are trademarks of Amino Communications Ltd. All other trademarks or registered trademarks belong to their respective owners.This item incorporates copy protection technology that is protected by U.S. patents and other intellec-tual property rights of Rovi Corporation. Reverse engineering and disassembly are prohibited.CHANGESThe material in this document is for information only and is subject to change without notice. While reasonable eorts have been made in the preparation of this document to assure its accuracy, Amino Communications Ltd. assumes no liability resulting from the use of the information contained herein. Amino Communications Ltd. reserves the right to make changes in the product design without reserva-tion and without notication to its users.P/N: 99-708004-15 - V1.0Table of ContentsOVERVIEW2 Safety Instructions4 What’s Included6 Front Panel7 Rear PanelCONNECTING VIDEO8 High-Denition TVs9 Standard-Denition TVsCONNECTING AUDIO10 Stereo11 Surround SoundCONNECTING NETWORK12 Ethernet or MoCAPOWERING UP14 Setting up Remote Control14 Using IR Extender Receiver15 Connecting to Power Source 16 Declaration of Conformity
QUICK START GUIDEQUICK START GUIDEAMULET MEDIA RECORDERAMULET MEDIA RECORDER32Important Safety Instructions• WARNING: To reduce the risk of re or electric shock, do not expose this ap-paratus to rain or moisture.• The apparatus shall not be exposed to dripping or splashing and that no ob-jects lled with liquids, such as vases, shall be placed on the apparatus.• Read these instructions. • Keep these instructions. • Heed all warnings. • Follow all instructions. • Do not use this apparatus near water. • Clean only with dry cloth. • Do not block any ventilation openings. Install in accordance with the manu-facturer’s instructions. • Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prongs are provided for your safety. If the provided plug does not t into your outlet, consult an electrician for replacement of the obsolete outlet. • Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. • Only use attachments/accessories specied by the manufacturer. • Unplug this apparatus during lightning storms or when unused for long peri-ods of time. • Refer all servicing to qualied service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the ap-paratus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.• To reduce the risk of electric shock, DO NOT remove cover or back panel. No user serviceable parts inside. Refer servicing to qualied personnel.Important Safety Instructions (Continued)• To help prevent electric shock, plug the power cable into properly grounded sources. Use only properly grounded extension cords and adaptors, if they are needed.• The AC main plug is used as the disconnect device, the disconnect device shall remain readily operable.• Make sure nothing is lying on any of the cables.• Be sure the cables are located where they will not be stepped on or tripped over.• Do not spill food or liquids onto the unit.• Do not push any objects into the free slots. Doing so will damage the unit, can cause re or electrical shock, and can short out interior components.• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampliers) that produce heat.• Do not block cooling vents.• Do not place the equipment in a closed-in wall unit.• When you disconnect a cable, pull on its connector or on its strain relief loop, not on the cable itself. Some cables have a connector with locking tabs; if you are disconnecting this type of cable, press in on the locking tabs before disconnecting the cables.• When you connect a cable, make sure both connectors are correctly oriented and aligned before connecting to avoid bending connector pins.• For PLUGGABLE EQUIPMENT, the socket-outlet should be installed near the equipment for easy access.• Changes or modications not expressly approved by the party responsible could void the user’s authority to operate this device.Operating InformationOperating Temperature: 0 °C (32 °F) to 35 °C (95 °F)
QUICK START GUIDEQUICK START GUIDEAMULET MEDIA RECORDERAMULET MEDIA RECORDER54What’s Included2 Batteries forRemote ControlAmulet Quick Start Guide Remote Control Guide*Amulet Media RecorderEthernet Cable (Optional)HDMI Cable (Optional)Additional items that may be required (not included):• Ethernet Cable• HDMI Cable• Digital Audio Cable• Network Router• MoCA BridgeAC Power AdapterDIN-to-RCA Cable*The Remote Control may vary and is dependent on your service provider.IR Extender Receiver (Optional)IR Remote Control*
QUICK START GUIDEQUICK START GUIDEAMULET MEDIA RECORDERAMULET MEDIA RECORDER76Amulet — Front PanelName Description1Power LED Solid blue indicates the unit is onSolid red indicates the unit is in standby modeFlashing blue indicates the unit is starting up2MoCA Indicator Blue dot indicates MoCA network is connected3Network LED Solid green indicates network is connected4Clock Displays current time set by your service provider. May not display time while device is booting up. 5Record Indicator Blue dot indicates a TV program is currently recording6HD Indicator Blue dot indicates current program is playing in HD (720p or higher) resolutionAmulet — Rear PanelName Description1MoCA IN Port for connecting to MoCA network2A/V OUT 9-Pin DIN conector for connecting to video output us-ing DIN-to-RCA cable3Digital Audio S/PDIF digital optical audio TOSLINK output4Reset Reset the device factory settings with a thin metal probe5HDMI Digital video and audio port for connecting to a high-denition TV (HDTV)6IR Extender Jack To connect IR Extender Receiver7USB To connect USB 3.0 devices such as USB Flash Drive and External Hard Drive(max 900mA load)8Ethernet Plug for wired network connection9Power DC power jack (100-240V, Output 12V/3A)Availability of certain features is dependent on your service provider. Availability of certain features is dependent on your service provider.27412536531648 9
QUICK START GUIDEQUICK START GUIDEAMULET MEDIA RECORDERAMULET MEDIA RECORDER98STEP 1: CONNECTING VIDEOAmulet provides two video options for connecting to your TV: HDMI and Composite Video.Select a video option then proceed to Step 2.Make sure your TV is turned on and the correct video input is selected.Option 1: HDMI (Recommended)If your TV has an HDMI connection, use an HDMI cable (may not be included) and connect Amulet to the HDMI IN port on your TV. This connection provides both video and audio so you do not need a separate audio connection. Proceed to “Connecting Network” on page 12”.Delivers the best video & audio quality via a single cableS-VIDEOCable is optional and may not be includedOption 2: Composite VideoUse the DIN-to-RCA cable provided and connect the yellow cable to the yellow VIDEO IN port on your TV. Then proceed to the next step (“Connecting Audio”) to con-nect the red/white cables.If you have already selected HDMI or Component Video as your video connection, then do not use this cable.Composite VideoDelivers good picture qualityCable includedS-VIDEO
QUICK START GUIDEQUICK START GUIDEAMULET MEDIA RECORDERAMULET MEDIA RECORDER1110STEP 2: CONNECTING AUDIOAmulet has two audio options: Stereo or Surround Sound. Select an audio option and proceed accordingly.NOTE: If you have already selected HDMI as your video con-nection, then skip this audio section and proceed to “Connect-ing Network” on page 12.Option 1: StereoUse the DIN-toRCAx6 cable provided and connect the 3.5mm jack to the Amulet A/V Out port and the red and white cables to the AUDIO IN port on your TV.S-VIDEOCable included Cable not includedOption 2: Surround SoundIf your TV is connected to an A/V Receiver that supports Dolby Digital 5.1 Surround Sound, use a digital audio cable (sold separately) to connect Amulet to the OPTICAL AUDIO IN port on your A/V Receiver.
QUICK START GUIDEQUICK START GUIDEAMULET MEDIA RECORDERAMULET MEDIA RECORDER1312STEP 3: CONNECTING NETWORKSelect from one of the following networking options.Option 1Connect an Ethernet cable (sold separately) from Amulet to a cable/DSL modem or Network Router.Router not includedCable is optional and may not be includedOption 2Connect your Amulet to a MoCA Network.NOTE: Contact your service provider for more details and instructions about the MoCA network conguration.Cable not included
QUICK START GUIDEQUICK START GUIDEAMULET MEDIA RECORDERAMULET MEDIA RECORDER1514STEP 4: POWERING UPSetting Up Remote Control1. Open the battery cover by pressing down on the battery cover latch and sliding it o.2. Insert the batteries, matching the “+” and “-” marks on the batteries with the interior of the remote control.3. Snap on the battery cover to close.NOTE: Refer to the Remote Control Guide for more details about other remote control features.Using IR Extender ReceiverThe remote control uses InfraRed (IR) light signals to control the Amulet. IR signals cannot go through walls or other solid objects. If the line of sight of your Amulet is blocked, then you can use the IR Extender Receiver provided to extend the reach of IR signals from the remote control.Connecting to Power Source1. Connect the power cord to the POWER port on the back of the Amulet.2. Plug the AC power adapter to a power outlet.3. Follow the on-screen instructions.NOTE: Make sure your TV is turned on and the correct video input is selected.
QUICK START GUIDEQUICK START GUIDEAMULET MEDIA RECORDERAMULET MEDIA RECORDER1716Declaration of ConformityTo ensure proper use of this product, please read this manual carefully and retain it for fu-ture reference. Should the unit require maintenance, contact an authorized service location.WARNING: This symbol indicates the presence of uninsulated dangerous voltage within the product’s enclosure that constitutes a risk of electric shock. Do not open the product’s case.CAUTION: This symbol indicates you must take care; there is risk of damage to the equip-ment or to yourself.Declaration of Conformity (Europe Only)This product is in conformity with the Council Directives:•EMCDirective2004/108/EC•LowvoltageDirective2006/95/ECIndustry Canada statement:This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Ce dispositif est conforme à la norme CNR-210 d’Industrie Canada applicable aux appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage préjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de provoquer un fonc-tionnement indésirable. Radiation Exposure Statement:This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.Déclaration d’exposition aux radiations:Cet équipement est conforme aux limites d’exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un mini-mum de 20 cm de distance entre la source de rayonnement et votre corps.Declaration of Conformity (Continued)To prevent re or shock hazard, do not expose this product to rain or moisture. To reduce the risk of electric shock, DO NOT remove the cover or back. No user serviceable parts are inside. For servicing refer to qualied personnel.Declaration of Conformity (United States Only)This device complies with Part 15 of the FCC Rules. Operation is subject to the following conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired opera-tion. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the Federal Communication Commission (FCC) Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harm-ful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment OFF and ON, the user is encouraged to try to correct the interference by one or more of the following measures: •Reorientorrelocatethereceivingantenna.•Increasetheseparationbetweentheequipmentandthereceiver.•Connecttheequipmenttoadierentcircuitfromthattowhichthereceiveriscon-nected.•Consultthedealeroranexperiencedradio/TVtechnicianforhelp.FCC Caution: Any changes or modications not expressly approved by the party responsi-ble for compliance could void the user’s authority to operate this equipment.This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.Radiation Exposure Statement:This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.®The terms HDMI and HDMI High-Denition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.Manufactured under licence from DolbyLaboratories. Dolby and the double D symbol are trademarks of Dolby Laboratories.CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AND INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS
©2016 Amino Communications Ltd. Amino and connecting the home are trademarks of Amino Communications Ltd. Other company, product, and service names may be trademarks or service marks of others. All information contained in this document is subject to change without notice. Information contained in this document is provided on an as is basis. In no event will Amino be liable for damages arising directly or indirectly from any use of the information contained in this document. Subject to change without notice.

Navigation menu