Amped Wireless AEX1900L Whole Home Smart Wi-Fi Range Extender User Manual ALLY19B SetupGuide 2017 03 17c 568x159mm
Amped Wireless Whole Home Smart Wi-Fi Range Extender ALLY19B SetupGuide 2017 03 17c 568x159mm
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3358323 |
| Application ID | wLRtl0TVTDcLqqSw2tvnYA== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 111.03kB (1387827 bits) |
| Date Submitted | 2017-04-14 00:00:00 |
| Date Available | 2017-10-15 00:00:00 |
| Creation Date | 2017-03-17 10:50:12 |
| Producing Software | Adobe PDF library 9.00 |
| Document Lastmod | 2017-04-13 17:47:13 |
| Document Title | ALLY19B_SetupGuide_2017-03-17c_568x159mm |
| Document Creator | Adobe Illustrator CS4 |
Let’s Get Started AR1900L/ART19B/AEX1900L/AEXT19B 1 Download the App 4 Create Your Wi-Fi Network 6 Set Up Your ALLY Extender Download the Amped Wireless ALLY app on your Android or iOS device. Search for ALLY Whole Home Wi-Fi System on the Google Play or Apple Store, or visit ampedwireless.com/allyapp. We support Android 4.4+ and iOS 9+. At the end of the setup, you will be asked to create a name and password for your new Wi-Fi networks. 1. Find a spot halfway between your ALLY Router and the far end of your home. If you have a two story home, it is recommended that your ALLY Router and ALLY Extender are on opposite floors. Tip: The 5GHz network is faster than the 2.4GHz network, but a 2.4GHz will have more range. Not in the box: Android or iOS device with Internet Broadband Modem 3. Wait about 3 minutes, or until the LED stops blinking and turns a solid green, orange or red. If the light is green or orange, then you've found a good spot. If the light turns solid or blinking red, then the ALLY Extender is too far from the ALLY Router. Move it closer and try again until the light turns solid green or orange. 5 Connect Devices & Explore the App 2 Create Your Account Your Wi-Fi is now up and running. Connect devices to your new network and add User Profiles. Also, check out ALLY's security and parental control features. Open the App and create your account. The account allows you to securely manage your ALLY from anywhere and from any device. Do This Settings What You Need ALLY Router ALLY Extender Ethernet Cable Power Adapters 2. Power on the ALLY Extender using the included power adapter with the yellow sticker. Check for updates, change Wi-Fi passwords and more Users See and create user profiles 3 Set Up Your ALLY Devices Follow the steps in the app to get your ALLY up and running. Once ALLY is on, go to your phone’s Wi-Fi settings and connect to Amped_ALLY_XXXX. This will allow the app to verify and prepare ALLY for the next step. Return to the ALLY app after you’ve connected. Activity View and block connecting devices Get a glance of recent network activities When the LED is solid green, the Extender is placed in a good spot. Orange is sufficient, but green will perform better. Network Settings Internet AVG Protection Guests Modem ALLY Extender Create a guest network Updates Not This Check for app or firmware updates When the LED is red, the Extender is too far from Router and will not work. Move it closer. Internet Modem © 2017 Amped Wireless / Newo Corporation. All rights reserved. ALLY Router ALLY Router ALLY Extender Buttons & Ports Status Lights ALLY Router ALLY Extender ALLY Router PWR Solid - Internet Connection OK Solid - No Internet Connection Slow Blinking - Loading new firmware, booting up, or Sync/WPS connection initiated Fast Blinking - Resetting to default factory settings Get Answers Power Port Use the power adapter with the white sticker Solid - 70 to 100% Connection strength with the ALLY Router Solid - 60 to 69% Connection strength with the ALLY Router During setup on the ALLY app, I get an error message that says: "No Internet Detected" and I cannot finish the setup. MODEM Modem Port WPS / SYNC Wired Ports ALLY Extender PWR Reset your modem by holding down the Reset button located on the back of the modem for approximately five seconds. Try the automatic configuration again. b) Static IP: Your Internet connection may require a static IP setting. Check with your ISP to obtain the IP settings. You can set Static IP using the ALLY app by running through the setup process and tapping "Manually configure your ALLY" when the Connection Error page appears. c) DSL Connections: Your Internet connection may require login information. If you are using PPPoE mode, you will need to manually configure your Internet connection settings and obtain your username and password. You can set a PPPoE connection using the ALLY app by running through the setup process and tapping "Manually configure your ALLY" when the Connection Error page appears. NETWORK a) WPS / SYNC Slow Blinking - No connection to the Router has been established Power Port Use the power adapter with the yellow sticker Slow Blinking - Loading new firmware, booting up, or Sync connection initiated a) Wired Port a) Fast Blinking - Resetting to default factory settings If the ALLY Extender LED is flashing red, this means it does not have a connection to the ALLY Router. Check that the ALLY Router is powered on. If it is, reboot the ALLY Extender by powering it off and back on. If the LED remains flashing red, move the ALLY Extender closer to the ALLY Router and check again until the LED turns green or orange. c) If your LED remains flashing red after trying (a) and (b), please contact Elite Support. I see an error "No Connection to ALLY" when using the ALLY app. a) To access the advanced settings menu, connect to the ALLY’s Wi-Fi network. Open a web browser and go to: http://setup.ampedwireless.com. You will be prompted for a password which can be found on the ALLY app by going to Settings (icon on the top right corner of the status page) and then going to Advanced settings. Some features on the Web Menu will be disabled when the Router is in use with the ALLY app. I wish to use the ALLY Router and Extender without the app. How do I do this? Power on the ALLY Extender and check that the status LED is either green or orange. If the color is red this means the ALLY Extender is too far from the ALLY Router. Power off the ALLY Extender and move it to a location closer to the ALLY Router and power it on again. Check that the ALLY Extender LED is green or orange. If it is still red repeat the above steps. b) Go to the ALLY app and tap on the settings icon on the top right corner of the home screen. From the settings screen tap "Erase all data & disconnect ALLY". This will remove your ALLY Router and allow you to set the ALLY Router to a new account or an existing account. I wish to configure advanced settings on the Router, such as changing Wi-Fi channels, configuring port forwarding, USB storage, etc. My Wi-Fi coverage is poor or my Wi-Fi speeds seem slow. It doesn’t seem like my ALLY Extender is working. Solid - 0 to 59% Connection strength with the ALLY Router a) How can I remove my ALLY Router from my ALLY app account? a) If you have never set the ALLY Router up using the ALLY app follow these steps: Power on the ALLY Router and connect to the ALLY’s Wi-Fi network. Open a web browser and go to: http://setup.ampedwireless.com to access the web menu and web based setup wizard. Follow the steps to configure your ALLY Router. b) If you have previously configured the ALLY Router using the ALLY app and you wish to no longer use the ALLY app with the Router follow these steps: While the ALLY Router is powered on, reset the ALLY Router by pressing the Reset button on the bottom of the Router for 10 seconds. The status light should blink rapidly when the Router has been reset. Once this is done, follow the steps in (a) to configure the Router using the Web Menu. If you are experiencing problems with your ALLY setup, please contact our Elite Support. The ALLY Router and the ALLY app can no longer communicate. Check that the ALLY Router is connected to the modem correctly. Reboot your modem or the ALLY Router if necessary. 1-800-573-8820 or 1-909-217-3168 | techsupport@ampedwireless.com | www.ampedwireless.com/support © 2017 Amped Wireless / Newo Corporation. All rights reserved. ALLY12B / ALLY19B v031717 Regulatory & Legal TM 1900 Whole Home Smart Wi-Fi System ® AR1900L & AEX1900L Regulatory Information FCC Statement and Declaration: Amped Wireless declares that this device complies with Part 15 of the FCC Rules and Regulations. Operation of this device is subject to the following two (2) conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. FCC Notice: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. - Increase the distance between the equipment and the receiver. Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution and Safety Notices: Any changes or modifications (including the antennas) made to this device that are not expressly approved by the manufacturer may void the user’s authority to operate the equipment. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. Avoid use of this product near water or during an electrical storm as there may be a remote risk of electrical shock from lighting. This product may contain lead, known to the State of California to cause cancer, and birth defects or other reproductive harm. Wash hands after handling. This device must always be used with a Listed Computer or device. For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible. This device is restricted to indoor use when operated in the 5.15 to 5.25 GHz frequency range. FCC requires this product to be used indoors for the frequency range 5.15 to 5.25 GHz to reduce the potential for harmful interference to co-channel Mobile Satellite systems. FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator & your body. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Industry Canada Statement: This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Radiation Exposure Statement: This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator and your body. The transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible. The device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems. Déclaration d’Industrie Canada : Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. Déclaration d’exposition à la radiation : Cet équipement respecte les limites d’exposition aux rayonnements IC définies pour un environnement non contrôlé. Cet équipement doit être installé et mis en marche à une distance minimale de 20 cm qui sépare l’élément rayonnant de votre corps. L’émetteur ne doit ni être utilisé avec une autre antenne ou un autre émetteur ni se trouver à leur proximité. Pour les produits disponibles aux Etats-Unis / Canada du marche, seul le canal 1 a 11 peuvent etre exploites. Selection d'autres canaux n'est pas possible. Les dispositifs fonctionnant dans la bande 5150-5250 MHz sont reserves uniquement pour une utilisation a l’interieur afin de reduire les risques de brouillage prejudiciable aux systemes de satellites mobiles utilisant les memes canaux. LEGAL NOTICES & DISCLAIMERS Copyright Information and Trademark Usage Guidelines © 2017 Amped Wireless / Newo Corporation. All rights reserved. Amped Wireless, Newo Corporation, and the Amped Wireless logo are registered trademarks or trademarks of Newo Corporation. All non-Amped Wireless trademarks, logos, brands and products are trademarks or registered trademarks of their respective owners. Amped Wireless does not claim any relation. Mention of non-Amped Wireless products and brands are for information purposes only and does not constitute an endorsement or affiliation. Amped Wireless authorizes you to copy materials published by Amped Wireless solely for non-commercial use within your organization in support of Amped Wireless products. No other use of this information is authorized. Any copy of these materials which you make shall retain all copyright and other proprietary notices in the same form and manner as on the original. Except as specified above, nothing contained herein shall be construed as conferring by implication, estoppel or otherwise any license or right under any patent, trademark or copyright of Amped Wireless or any third party. All contents of this product, including Software, are protected by copyright, except as permitted herein. No portion of the information may be reproduced without prior written permission from Amped Wireless. The distribution, modification, publication and transmission of any content of this product for public or commercial purposes is strictly prohibited. The Amped Wireless logo requires permission for use. For use of the Amped Wireless logo, please email legal@ampedwireless.com. Use of Amped Wireless' trademarks requires the use of the proper trademark symbol in all usage cases. The guidelines for trademark usage apply to all Amped Wireless customers, employees, vendors, consultants, licensees and any other third party. Disclaimers Amped Wireless makes all attempts in providing accurate information on all media. However, Amped Wireless makes no warranty as to the accuracy of the information, including representations and warranties about the accuracy of product specifications, marketing material, product availability, new product launch dates and all other content herein. Amped Wireless reserves the right to update and change information without prior notice. All information provided is provided "AS IS" with all faults without warranty of any kind. Either expressed or implied. Amped Wireless and its suppliers disclaim all warranties, expressed or implied including, without limitation. Amped Wireless and its suppliers shall not be liable for any indirect, special, consequential, or incidental damages including, without limitation, lost profits or revenues, cost of replacement goods, loss or damage to data arising out of the use or inability to use any Amped Wireless product, damages resulting from use of or reliance on information present, even with prior notice to Amped Wireless. All non-Amped Wireless trademarks, logos, brands and products are trademarks or registered trademarks of their respective owners. Amped Wireless does not claim any relation. Mention of non-Amped Wireless products and brands are for information purposes only and does not constitute an endorsement or affiliation. Product wireless range specifications are based on performance test results. Actual performance may vary due to differences in operating environments, building materials and wireless obstructions. Performance may increase or decrease over the stated specification. Wireless coverage claims are used only as a reference and are not guaranteed as each wireless network is uniquely different. Maximum wireless signal rates are derived from IEEE 802.11 standard specifications. Actual data throughput may vary as a result of network conditions and environmental factors. Wi-Fi Range Extenders may not work with non-standard Wi-Fi routers or routers with altered firmware or proprietary firmware, such as those from third party sources or some Internet service providers. May not work with routers that do not comply with IEEE or Wi-Fi standards. Software Licenses / Disclaimers This product contains Software (including firmware), licensed to you, the purchaser, by Amped Wireless. This also includes Software downloaded from an authorized website, such as www.ampedwireless.com or from an authorized application market such as Google Play or Apple’s App Store. This license allows you to operate the Software in the manner described in the user’s manual for the purchased product. You can make as many copies of the Software as needed for your personal use. Modifying of or tampering of the Software, including but not limited to any Open Source Software, is solely at your own risk. Amped Wireless is not responsible for any such modification or tampering. Amped Wireless will not support or warrant any product in which you have or have attempted to modify the Software provided by Amped Wireless. You may not lease, sublicense, resell, redistribute or otherwise transfer the Software without written consent from Amped Wireless. The Software is provided to you “as is” with all faults and without warranties of any kind. In particular, Amped Wireless does not guarantee that the Software will be error-free or that the Software will be free from system threats or attacks from viruses. Amped Wireless does not warrant that the Software will meet your expectations or that the software will be suitable for your particular situation. Amped Wireless warrants that any media (such as an included CD) on which the Software is provided to be free from defects. If you have an eligible warranty claim for defective media, Amped Wireless will replace the Software media. IT IS YOUR RESPONSIBILITY TO BACK UP YOUR SYSTEM INCLUDING, WITHOUT LIMITATION, ANY DATA THAT YOU MAY USE OR POSSESS IN CONNECTION WITH THE PRODUCT. ANY MATERIAL, INFORMATION OR DATA DOWNLOADED OR OTHERWISE OBTAINED IS ACCESSED AT YOUR OWN DISCRETION AND RISK, AND YOU WILL BE RESPONSIBLE FOR ANY DAMAGE TO YOUR COMPUTER SYSTEM OR PRODUCT, OR LOSS OF DATA THAT RESULTS FROM THE DOWNLOAD OF SUCH MATERIAL, INFORMATION OR DATA. AMPED WIRELESS IS NOT RESPONSIBLE FOR ANY DAMAGE TO THE PURCHASER’S COMPUTER SYSTEM OR DATA. All title and copyrights in and to the Software and any copies thereof are owned by Amped Wireless or its partners/suppliers. All title and intellectual property rights in and to the content which may be accessed through use of the Software is the property of the respective content owner and may be protected by applicable copyright or other intellectual property laws and treaties. This license grants you no rights to use such content. You may not delete any copyright, trademark or other proprietary notices from the Software or documentation. Dispute Resolution / Arbitration This section describes how you agree to resolve any disputes with Amped Wireless regarding these Terms of Use or your purchase of any product from Amped Wireless and your use of that product. You and Amped Wireless agree to the following resolution process. To begin with, you agree that any claim that you might have against us regarding these Terms of Use or your purchase of any Amped Wireless product or use of that product must be resolved through binding arbitration before the American Arbitration Association using its Commercial Arbitration Rules. The arbitrator shall have exclusive authority to the extent permitted by law to resolve all disputes arising out of or relating to the interpretation, applicability, enforceability, or formation of our agreement, including, but not limited to, any claim that all or part of this agreement is void or voidable. The arbitrator shall also have exclusive authority to the extent permitted by law to decide the arbitrability of any claim or dispute between you and Amped Wireless. Because we prefer to resolve our issues with you directly, you agree to arbitrate with Amped Wireless only in your individual capacity, not as a representative or member of a class. As such, your claims may not be joined with any other claims and there shall be no authority for any dispute to be arbitrated on a class-action basis or brought by a purported class representative. It is important that you understand that the arbitrator’s decision will be binding and may be entered as a judgment in any court of competent jurisdiction. If the arbitrator rules against Amped Wireless, in addition to accepting whatever responsibility is ordered by the arbitrator, we will reimburse your reasonable attorneys' fees and costs. It's important to us that we address any issues you might have promptly. To help us do that, you agree to begin any arbitration within one year after your claim arose; otherwise, your claim is waived. Unless you and Amped Wireless agree otherwise, any arbitration hearings will take place in the county where you reside. If your claim is for $10,000 or less, you may choose whether the arbitration will be conducted solely on the basis of documents submitted to the arbitrator, through a telephonic hearing, or by an in-person hearing as established by the AAA Rules. If your claim exceeds $10,000, the right to a hearing will be determined by the AAA Rules. If your claim against Amped Wireless is for less than $10,000, Amped Wireless will pay all arbitration fees. If your claim against Amped Wireless is for $10,000 or more, you are responsible for paying your own portion of the fees set forth in the AAA’s fee schedule for consumer disputes, and Amped Wireless will pay all remaining arbitration fees. If you believe you cannot afford the AAA’s fee, you may apply to the AAA for a waiver. As an exception to this arbitration agreement, Amped Wireless is happy to give you the right to pursue in small claims court any claim that is within that court's jurisdiction as long as you proceed only on an individual basis. We would hope that our customer service agents could resolve any disputes you have with us without resorting to arbitration. Before initiating any arbitration proceeding, you agree to first discuss the matter informally with Amped Wireless for at least 30 days. To do that, please send your full name and contact information, your concern and your proposed solution to the contact listed below. This Agreement and the rights of the parties hereunder shall be governed by and construed in accordance with the laws of the State of California, exclusive of conflict or choice of law rules. The parties acknowledge that this Agreement evidences a transaction involving interstate commerce. Notwithstanding the provision in the preceding paragraph with respect to applicable substantive law, any arbitration conducted pursuant to the terms of this Agreement shall be governed by the Federal Arbitration Act (9 U.S.C., Secs. 1-16). Contact: Email: legal@ampedwireless.com tech support e-mail web 888-573-8820 techsupport@ampedwireless.com www.ampedwireless.com Amped Wireless A Division of Newo Corporation Copyright © 2017 Amped Wireless / Newo Corporation. All rights reserved. Amped Wireless, Newo Corporation, and the Amped Wireless Logo are registered trademarks or trademarks of Newo Corporation.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Create Date : 2017:03:17 10:50:12-07:00 Creator : Adobe Illustrator CS4 Modify Date : 2017:04:13 17:47:13+08:00 XMP Toolkit : Adobe XMP Core 5.6-c015 84.159810, 2016/09/10-02:41:30 Format : application/pdf Title : ALLY19B_SetupGuide_2017-03-17c_568x159mm Metadata Date : 2017:04:13 17:47:13+08:00 Creator Tool : Adobe Illustrator CS4 Thumbnail Width : 220 Thumbnail Height : 256 Thumbnail Format : JPEG Thumbnail Image : (Binary data 11483 bytes, use -b option to extract) Instance ID : uuid:a9f22022-74aa-4ccc-a451-51ba397d6fef Document ID : xmp.did:E27220B4320BE71193D386EB8ED5E4B4 Original Document ID : uuid:5D20892493BFDB11914A8590D31508C8 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:E07220B4320BE71193D386EB8ED5E4B4 Derived From Document ID : xmp.did:E07220B4320BE71193D386EB8ED5E4B4 Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8 Derived From Rendition Class : proof:pdf History Action : converted, saved, converted, converted, saved, saved, saved, saved, saved, converted, saved, converted, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, converted, saved, converted, saved, converted, saved, converted, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved History Instance ID : xmp.iid:D27F11740720681191099C3B601C4548, xmp.iid:F97F1174072068118D4ED246B3ADB1C6, xmp.iid:FA7F1174072068118D4ED246B3ADB1C6, xmp.iid:EF7F117407206811A46CA4519D24356B, xmp.iid:F07F117407206811A46CA4519D24356B, xmp.iid:F77F117407206811BDDDFD38D0CF24DD, xmp.iid:F97F117407206811BDDDFD38D0CF24DD, xmp.iid:FA7F117407206811BDDDFD38D0CF24DD, xmp.iid:FB7F117407206811BDDDFD38D0CF24DD, xmp.iid:FC7F117407206811BDDDFD38D0CF24DD, xmp.iid:FD7F117407206811BDDDFD38D0CF24DD, xmp.iid:FE7F117407206811BDDDFD38D0CF24DD, xmp.iid:B233668C16206811BDDDFD38D0CF24DD, xmp.iid:B333668C16206811BDDDFD38D0CF24DD, xmp.iid:B433668C16206811BDDDFD38D0CF24DD, xmp.iid:F77F11740720681197C1BF14D1759E83, xmp.iid:F87F11740720681197C1BF14D1759E83, xmp.iid:F97F11740720681197C1BF14D1759E83, xmp.iid:FA7F117407206811B628E3BF27C8C41B, xmp.iid:FF7F117407206811B628E3BF27C8C41B, xmp.iid:07C3BD25102DDD1181B594070CEB88D9, xmp.iid:F87F1174072068119098B097FDA39BEF, xmp.iid:F77F117407206811BB1DBF8F242B6F84, xmp.iid:F97F117407206811ACAFB8DA80854E76, xmp.iid:0180117407206811834383CD3A8D2303, xmp.iid:F77F117407206811818C85DF6A1A75C3, xmp.iid:3B6462C0436DE51198CCD0E75BEC5D51, xmp.iid:82149B607877E5118C0AD8727E788FAC, xmp.iid:C7730A7EC27CE5118BFEC097CAAF3AA9, xmp.iid:B98B76A6AD81E511A223BFC39D0F3CEC, xmp.iid:BDE6BAEC96A2E511A208BC77725D138C, xmp.iid:28D1AF8B8CAEE511AD13A510BD8485E8, xmp.iid:DD9AB50167B9E5119BA5DE078DCFA829, xmp.iid:DE9AB50167B9E5119BA5DE078DCFA829, xmp.iid:DF9AB50167B9E5119BA5DE078DCFA829, xmp.iid:E09AB50167B9E5119BA5DE078DCFA829, xmp.iid:E19AB50167B9E5119BA5DE078DCFA829, xmp.iid:E29AB50167B9E5119BA5DE078DCFA829, xmp.iid:301AAB06E160E6118B02C48A0C615113, xmp.iid:311AAB06E160E6118B02C48A0C615113, xmp.iid:321AAB06E160E6118B02C48A0C615113, xmp.iid:331AAB06E160E6118B02C48A0C615113, xmp.iid:2EED67512063E61189659A11BFFAF319, xmp.iid:A644F5394763E6118677C8AA589DE618, xmp.iid:9F02B2244A63E611AEB6875C7D59F417, xmp.iid:6808B651CC63E611AB5E892EC4846666, xmp.iid:6908B651CC63E611AB5E892EC4846666, xmp.iid:6A08B651CC63E611AB5E892EC4846666, xmp.iid:959EED65F363E611B968D52E12EAE62C, xmp.iid:D6558D7C0964E611B7F7CEACAE509E08, xmp.iid:E07220B4320BE71193D386EB8ED5E4B4, xmp.iid:E27220B4320BE71193D386EB8ED5E4B4 History When : 2008:04:17 14:19:15+05:30, 2008:05:15 16:23:06-07:00, 2008:05:15 17:10:45-07:00, 2008:05:15 22:53:33-07:00, 2008:05:15 23:07:07-07:00, 2008:05:16 10:35:43-07:00, 2008:05:16 10:40:59-07:00, 2008:05:16 11:26:55-07:00, 2008:05:16 11:29:01-07:00, 2008:05:16 11:29:20-07:00, 2008:05:16 11:30:54-07:00, 2008:05:16 11:31:22-07:00, 2008:05:16 12:23:46-07:00, 2008:05:16 13:27:54-07:00, 2008:05:16 13:46:13-07:00, 2008:05:16 15:47:57-07:00, 2008:05:16 15:51:06-07:00, 2008:05:16 15:52:22-07:00, 2008:05:22 13:28:01-07:00, 2008:05:22 16:23:53-07:00, 2008:05:28 16:45:26-07:00, 2008:06:02 13:25:25-07:00, 2008:06:09 14:58:36-07:00, 2008:06:11 14:31:27-07:00, 2008:06:11 22:37:35-07:00, 2008:06:27 14:40:42-07:00, 2015:10:07 15:35:46-07:00, 2015:10:20 15:17:40-07:00, 2015:10:27 08:50:48-07:00, 2015:11:02 14:04:12-08:00, 2015:12:14 14:19:34-08:00, 2015:12:29 16:45:12-08:00, 2016:01:12 14:05:38-08:00, 2016:01:12 15:00:35-08:00, 2016:01:12 15:04:55-08:00, 2016:01:12 16:06:15-08:00, 2016:01:12 16:23:38-08:00, 2016:01:12 16:53:42-08:00, 2016:08:12 16:03:47-07:00, 2016:08:12 16:11:13-07:00, 2016:08:12 16:15:04-07:00, 2016:08:12 16:34:47-07:00, 2016:08:15 12:41:53-07:00, 2016:08:15 17:20:24-07:00, 2016:08:15 18:06:19-07:00, 2016:08:16 09:13:07-07:00, 2016:08:16 09:30:16-07:00, 2016:08:16 10:24:25-07:00, 2016:08:16 13:52:51-07:00, 2016:08:16 16:30:58-07:00, 2017:03:17 09:56:45-07:00, 2017:03:17 10:50:10-07:00 History Software Agent : Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4 History Changed : /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, / History Params : from application/vnd.adobe.illustrator to application/vnd.adobe.illustrator Manifest Link Form : EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference Manifest Reference File Path : \\192.168.10.198\Amped\PM Folder\PRODUCTS\a - HomeKit\Mobile\02_APP\00_screenshots\00_archive\v3\14.PNG, \\192.168.10.198\Amped\PM Folder\PRODUCTS\a - HomeKit\Mobile\02_APP\00_screenshots\00_archive\v3\capture4.PNG, \\192.168.10.198\Amped\PM Folder\PRODUCTS\a - HomeKit\ProductImages\v2_ROUTER_ALLY-R1900\02_main_front\ally_main_front_3000.png, \\192.168.10.198\Amped\PM Folder\PRODUCTS\a - HomeKit\ProductImages\v2_ROUTER_ALLY-R1900\02_main_front\ally_main_front_3000.png, \\192.168.10.198\Amped\PM Folder\PRODUCTS\a - HomeKit\Mobile\02_APP\00_screenshots\00_archive\v3\13.PNG, \\192.168.10.198\Amped\PM Folder\PRODUCTS\a - HomeKit\Mobile\02_APP\00_screenshots\00_archive\v4\home_screen.png, \\192.168.10.198\Amped\PM Folder\PRODUCTS\a - HomeKit\Mobile\02_APP\00_screenshots\00_archive\v3\capture4.PNG, \\192.168.10.198\Amped\PM Folder\PRODUCTS\LRC100\Art Files\Amped Wireless\01_iOS\kalayvsaas_graphs_ios\slice\btn_tb_cloud_h@3x.png Startup Profile : Print Has Visible Overprint : False Has Visible Transparency : True N Pages : 1 Max Page Size W : 26.000000 Max Page Size H : 6.500000 Max Page Size Unit : Inches Font Name : HelveticaNeueLTStd-Lt, HelveticaNeueLTPro-BdEx, HelveticaNeueLTPro-Lt, HelveticaNeue-Roman, MyriadPro-Regular Font Family : Helvetica Neue LT Std, Helvetica Neue LT Pro, Helvetica Neue LT Pro, Helvetica Neue, Myriad Pro Font Face : 45 Light, 73 Bold Extended, 45 Light, 55 Roman, Regular Font Type : Open Type, Open Type, Open Type, Type 1, Open Type Font Version : OTF 1.029;PS 001.002;Core 1.0.33;makeotf.lib1.4.1585, Version 1.000;PS 001.000;Core 1.0.38, Version 1.000;PS 001.000;Core 1.0.38, 001.102, Version 2.037;PS 2.000;hotconv 1.0.51;makeotf.lib2.0.18671 Font Composite : False, False, False, False, False Font File Name : HelveticaNeueLTStd-Lt.otf, HelveticaNeueLTPro-BdEx.otf, HelveticaNeueLTPro-Lt.otf, hlr.PFB; hlr.pfm, MyriadPro-Regular.otf Plate Names : Cyan, Magenta, Yellow, Black, PANTONE Yellow C Swatch Groups Colorants Tint : 100.000000 Swatch Groups Group Name : Brights Swatch Groups Group Type : 1 Swatch Groups Colorants Swatch Name: C=60 M=90 Y=0 K=0 Swatch Groups Colorants Mode : CMYK Swatch Groups Colorants Type : PROCESS Swatch Groups Colorants Cyan : 60.000002 Swatch Groups Colorants Magenta : 90.000004 Swatch Groups Colorants Yellow : 0.003099 Swatch Groups Colorants Black : 0.003099 Producer : Adobe PDF library 9.00 Page Count : 17EXIF Metadata provided by EXIF.tools