Amtran Technology Co UW-011 U-Wake Brainwave Detection Device User Manual
Amtran Technology Co Ltd U-Wake Brainwave Detection Device
User Guide Rev.02 (150529)
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2630169 |
| Application ID | 11Ti8DtERwCB7OI0RdGklg== |
| Document Description | User Guide Rev.02 (150529) |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 28.69kB (358586 bits) |
| Date Submitted | 2015-05-30 00:00:00 |
| Date Available | 2015-06-02 00:00:00 |
| Creation Date | 2015-05-29 11:26:42 |
| Producing Software | Acrobat Distiller 7.0.5 (Windows) |
| Document Lastmod | 2015-05-29 11:26:42 |
| Document Title | untitled |
1. Introdu uction Your U-Wake is designed to help yo ou keep awake from driving fatiigue. Via the U--Wake applicatio on on your Andro oid™/IOS devicce, you can syncchronise data with w your U-Wake e headband to see s the brainwa ave status in real time. The Apps can also make noise / vib bration in order to t alert you , be esides , the call-help message w will also send to o your friend d that you selecct via social-med dia . To wear U--Wake device and use U-Wake e application , it will try best to keep you falling asleep wh hen you were driving. 2. Hardw ware ov verview 1 Se ensor plate 2 He eadband 3 Ea ar Clip 4 Po ower button 5 No otification light A 6 Notification light B 7 Notification light C 8 Micro USB port 9 Reset hole 10 Insulation hole 11 Clip 12 Strap hole 3. Charging your U-Weak Before using your U-Weak for the first time, you need to charge it for approximately 12 Hours. Chargers are recommended. (Low battery Red is flashed / Charging red is continuously light / Charging full red light is off) To charge your U-Weak 1. Plug one end of the USB cable into the USB charger. 2. Plug the other end of the cable into the Micro USB port of your U-Weak Battery notification light status Notification light red continuously : The battery is charging and is not yet fully charged Notification light red is off : The battery is fully charged Low battery level notification When your U-Weak is on and the battery level is less than 10%, your U-Weak Red light is flashed. To check the battery level of your U-Weak 1. From the Home screen of your Android™ device Note : The battery of this device cannot not be changed 4. Assembly 1 1. To hold the e U-Wake in ho orizontal posittion, slide the device backw wards so that th he sensor can contact you ur forehead so o closely 2. Clip the earr sensor onto your ear lobe.. 4. FIX YOUR CONTROL BOX 1. To fix the control box in any place of cloth that you prefer . 2. To Push the power key over 1 second to turn the power on . 5.Turning your U-Weak on and off To turn on your U-Weak Press and hold down the power key until your When your U-Weak is on (Green light continuously on, Blue light is flashes). To turn off your U-Weak Press and hold down the power key until all LED light is off 6. Preparing to use your U-Wake For your U-Wake to work it must be connected to your Android™ / IOS™ device and the latest versions of the following applications must be installed on the Android™ / IOS™ device. To set up your U-Wake using Bluetooth® 1. Make sure that your U-Wake has been charged for at least 3 hours. 2. Android™/ IOS™device: Make sure you have installed or updated the U-Wake application to the latest version from Google Play™ / Apple Store™. 3. Turn on your U-Wake (Press the power key over 3~5 second). After U-Wake is power on. (Green light continuously on, Blue light is flashes, Blue light is Bluetooth status indication). 4. Wearing your U-Wake. Headband on the forehead head and main box can be clipped anywhere that you preferred. 5. Please make sure headband sensor and ear clip is contacted closely to your forehead / ear. 6. Android™ /IOS device: Turn on the Bluetooth® function. 7. Run the U-Wake application , then scan for Bluetooth® devices and select U-Wake in the list 8. When Bluetooth is connection Blue light is continued on PS: When Bluetooth connection 3 minute Green light will be turn off / Blue light is always on. 7.Resetting your U-Wake Reset your U-Wake if it behaves unexpectedly. To reset your U-Wake 1. If it behaves unexpectedly U-weak can’t turn on, please press the needle button 1~2 sec for reset 8.Trouble shooting 1. If press and hold down the power key but can’t turn onÎ (1) Please charge again (2)Use needle to press the reset key in order to do the hardware reset . 2. If LED light work abnormal Î Please use needle to press the reset key then turn on again. 3. If brainwave signal is poor,Î a. Please clean up your headband sensor & ear clip sensor b. Please make sure headband sensor and ear clip is contacted closely to your forehead / ear. c. Please don’t use the U-Wake when U-Wake device is in charge 9.Using the U‐Wake application You can view and change settings for your U-Wake from the U-Wake application . Menu Zone selection ( 50/60 Hz) Battery status indication Drowsiness Score ( 0 ~ 100 ) Detection Status Real time brainwave form Brainwave form history 10.Product spec Model Name Features Brainwave Brainwave Patterns Specification Wearing Style Transmission type BT Spec Headset Battery Spec Battery average operating time Contact pressure Button I/O interface Charging interface U‐Wake UW‐011 • Direct connect to dry electrode • One EEG channel + Reference + Ground • Extremely low‐level signal detection • Advanced filter with high noise immunity • Fatigue • Low Attention • 256Hz sampling rate • 3‐25Hz frequency range • Max Power Consumption: 45mA @ 3.3V • Operating voltage 3.0V ~4.2V (TBD) • Headband • BLE ( Support above android 4.3 & IOS) • IC compatible for BLE • Output：Bluetooth power 0.5mW • Transmission Distance：~ 30 feet • Frequency Range ：2.4GHz (2.4000GHz‐2.4835GHz) • Interface：GATT profile • 4.2V/600mA ~ 20 hours ~ 7 N (± 0,3 N) Power Key •Micro USB ; Brainwave Sensor ; Ear Clip • By Micro USB Dimension : 164.3mm(L)*165mm(W)*25mm(H) Carton Size : 12pcs / Ctn , 1147(D)*162(W)*210(H)mm Net Weight : 210 g Container Load : 4,200 pcs / 20" 11.Safety Label Information FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ‐‐ Reorient or relocate the receiving antenna. ‐‐ Increase the separation between the equipment and receiver. ‐‐ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ‐‐ Consult the dealer or an experienced radio/TV technician for help. CAUTION: To assure continued FCC compliance: Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co‐located or operating in conjunction with any other antenna or transmitter. IC This device complies with Industry Canada license‐exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co‐located or operating in conjunction with any other antenna or transmitter. Cet appareil radio est conforme au CNR‐210 d’Industrie Canada. L’utilisation de ce dispositif est autorisée seulement aux deux conditions suivantes : (1) il ne doit pas produire de brouillage, et (2) l’utilisateur du dispositif doit être prêt à accepter tout brouillage radioélectrique reçu, même si ce brouillage est susceptible de compromettre le fonctionnement du dispositif. Cet équipement est conforme aux limites d’exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet émetteur ne doit pas être co‐localisées ou opérant en conjonction avec tout autre antenne ou transmetteur.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes XMP Toolkit : 3.1-701 Producer : Acrobat Distiller 7.0.5 (Windows) Modify Date : 2015:05:29 11:26:42+08:00 Create Date : 2015:05:29 11:26:42+08:00 Format : application/pdf Title : untitled Document ID : uuid:10905029-6cf5-4018-a009-ece0d18fddde Instance ID : uuid:bfa3ee71-c0f2-4b7e-bfa1-2ff68065fdc8 Page Count : 8EXIF Metadata provided by EXIF.tools