Amtran Technology Co VF552XVT-WL WLAN USB CARD WN8522B 1-LF-MT User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1163760
Application ID	V2xpVD+hegT8Bx1HblCnLw==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	12.08kB (150990 bits)
Date Submitted	2009-09-03 00:00:00
Date Available	2009-09-03 00:00:00
Creation Date	2009-09-03 13:41:47
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2009-09-03 13:49:14
Document Title	Microsoft Word - WN8522B-LF-MT Spec_04-27-2009_V0 3_Add FCC statement_增加OEM整合警語_0903-2009.doc
Document Creator	PScript5.dll Version 5.2
Document Author:	Gia

Product Specification
Product Specification
WN8522B 1-LF-MT
IEEE Dual Band 802.11n USB2.0 module for DTV
v.03 draft
WN8522B 1
Product Specification
Table of Contents
Chapter 1
Introduction _____________________________________________________ 4
1. Introduction ________________________________________________________ 4
1.1 Product Features____________________________________________________ 4
1.2 Applications _______________________________________________________ 4
Chapter 2
Hardware _______________________________________________________ 5
2.1 General Overview __________________________________________________ 5
2.2 Hardware Architecture _______________________________________________ 5
2.3 Main Chipset Information ____________________________________________ 5
2.4 PCB dimension ______________________________________________________ 5
2.5 Antenna features _____________________________________________________ 5
2.6 Antenna dimension ___________________________________________________ 6
Chapter 3 Specifications ____________________________________________________ 7
References ________________________________________________________________ 10
WN8522B 1
Product Specification
Revision History
Edition #
Reason for revision
Issue date
Written by
V 01
♦
Initial Document
April 7, 2009
Katherine Hsieh
V 02
♦
Data Transfer Rate added
April 27, 2009
Andre Lin
V 03
♦
Antenna spec. added
June 15 2009
Andre Lin
WN8522B 1
Product Specification
Chapter 1
Introduction
1. Introduction
WN8522B 1 is a dual band wireless 802.11n USB module for DTV, Bluray Players, etc..
which enables consumer devices to support wireless connectivity over 802.11a/b/g/n WLAN .
1.1
Product Features
♦
High speed for wireless LAN connection, RX up at 300 Mbps data rate.
♦
♦
Backward compatible to the existing IEEE 802.11a/b/g WLAN infrastructure.
Support USB v2.0
1.2
Applications
♦ Module for Connected TV
WN8522B 1
Product Specification
Chapter 2
2.1
General Overview
♦
♦
USB 2.0 Interface
2 * antenna connectors
Hardware
2.2 Hardware Architecture
Broadcom 4323 single chip USB2.0
2.3
Main Chipset Information
BCM4323: MIMO MAC + Baseband processor and RF with fully forward compatible with IEEE 802.11n
draft2.0 standard.
2.4 PCB dimension
2.5 Antenna Features
Antenna VSWR is < 2.5.
Antenna Average Gain in the Main Cut is > -6dBi.
WN8522B 1
Product Specification
2.6 Antenna dimension
WN8522B 1
Product Specification
Chapter 3 Specifications
♦
Frequency Band:
Draft 802.11n Radio: 2.4 GHz
802.11g Radio: 2.4 GHz
802.11b Radio: 2.4 GHz
USA – FCC
Canada – IC
Europe – ETSI
France
Japan – STD-T66/STD-33
2412~2462MHz (Ch1~Ch11)
2412~2462MHz (Ch1~Ch11)
2412~2472MHz (Ch1~Ch13)
2457~2472MHz (Ch10~Ch13)
2412~2484MHz (Ch1~Ch14)
802.11a Radio : 5 GHz
5.150~5.250GHz
5.250~5.350 GHz
5.470~5.725 GHz
5.725~5.850GHz
♦
Operating Channels:
IEEE 802.11b/g/n compliant:
11 channels (US, Canada)
13 channels (ETSI)
4 channels (France)
14 channels (Japan)
♦
Transmit Power and Sensitivity:
TX Output Power:(Typical)
11b
18.5 +/- 1 dBm
11g
14.5 +/- 1 dBm@54Mbps
11n
14.5 +/- 1 dBm
Rx Sensitivity:(Typical)
-84 dBm @11 Mbps
-72 dBm @54 Mbps
-64 dBm @64-QAM, 20MHz channel spacing
-61 dBm @64-QAM, 40MHz channel spacing
WN8522B 1
Product Specification
♦ Data transfer rate
for 802.11a are (6, 9, 12, 18, 24, 36, 48, 54)
for 802.11b are (1, 2, 5.5, 11)
for 802.11g are (6, 9, 11, 12, 18, 24, 36, 48, 54)
for 11n ht20
MCS15
130M
MCS14
117M
MCS13
104M
MCS12
78M
MCS11
52M
MCS10
39M
MCS9
26M
MCS8
13M
MCS7
65M
MCS6
58.5M
MCS5
52M
MCS4
39M
MCS3
26M
MCS2
19.5M
MCS1
13M
MCS0
6.5M
MCS14
243M
MCS13
216M
MCS12
162M
MCS11
108M
MCS10
81M
MCS9
54M
MCS8
27M
MCS7
135M
MCS6
121.5M
MCS5
108M
MCS4
81M
MCS3
54M
MCS2
40.5M
MCS1
27M
MCS0
13.5M
for 11n ht40
MCS15
270M
♦
Modulation
DBPSK @1Mbps
DQPSK@2Mbp
CCK@5.5/11Mbps
BPSK@6/9 Mbps
QPSK@12/18Mbps
16-QAM@24Mbps
64-QAM@48/54Mpb and above, RX up to 300Mbps
♦
Current consumption(5V DC):
TX: mA Max,
WN8522B 1
@MCS7, 40MHz
Product Specification
RX:  mA Max,
@MCS15, 40MHz
Power Saving:  mA
Radio OFF mode:  mA
♦
♦
♦
♦
Operating Temperature: 0 ~ 40 oC ambient
Storage Temperature: -10 ~ 70 oC ambient
Humidity: 5 ~ 90% and must be non-condensing
Regulation and certification compliance available:
♦WHQL
♦ETSI/CE
♦ESD: EN61000-4-2, which specifies 4kV contact and 8kV air discharge.
WN8522B 1
Product Specification
References
♦
♦
♦
♦
Ralink Reference Design Functional Specification
IEEE 802.11b Standard Specification
IEEE 802.11g Standard Specification
IEEE 802.11n draft Standard Specification
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
FCC Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate this equipment.
For operation within 5.15 ~ 5.25GHz frequency range, it is restricted to indoor use
only.
WN8522B 1
10
Product Specification
IMPORTANT NOTE:
This module is intended for OEM integrator. The OEM integrator is still
responsible for the FCC compliance requirement of the end product, which
integrates this module.
20cm minimum distance has to be able to be maintained between the
antenna and the users for the host this module is integrated into. Under such
configuration, the FCC radiation exposure limits set forth for an
population/uncontrolled environment can be satisfied.
Any changes or modifications not expressly approved by the manufacturer
could void the user's authority to operate this equipment.
USERS MANUAL OF THE END PRODUCT:
In the users manual of the end product, the end user has to be informed to
keep at least 20cm separation with the antenna while this end product is
installed and operated. The end user has to be informed that the FCC
radio-frequency exposure guidelines for an uncontrolled environment can be
satisfied. The end user has to also be informed that any changes or
modifications not expressly approved by the manufacturer could void the
user's authority to operate this equipment. If the size of the end product is
smaller than 8x10cm, then additional FCC part 15.19 statement is required to
be available in the users manual: This device complies with Part 15 of FCC
rules. Operation is subject to the following two conditions: (1) this device may
not cause harmful interference and (2) this device must accept any
interference received, including interference that may cause undesired
operation.
LABEL OF THE END PRODUCT:
The final end product must be labeled in a visible area with the following " Contains
TX FCC ID: MDZVF552XVT-WL ". If the size of the end product is larger than 8x10cm,
then the following FCC part 15.19 statement has to also be available on the
WN8522B 1
11
Product Specification
label: This device complies with Part 15 of FCC rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
2.4GHz operation of this product in the U.S.A. is firmware-limited to channels 1
through 11.
The drawings, specifications and the data contain herein are the exclusive property of Arcadyan
Technology Corp. issued in strict confidence and shall not, without the prior written permission of
Arcadyan Technology Corp., be reproduced, copied or used, in parts or as a whole, for any purpose
whatsoever, except the manufacture of articles for Arcadyan Technology Corp.
Arcadyan makes no warranties with respect to the correctness, accuracy or wholeness of this
specification.
The information in this document is subject to change without notice.
Arcadyan
reserves the right to make revisions to this document and the product described herein without
obligation to notify any person or entity of any such changes.
WN8522B 1
12
Product Specification
WN8522B 1
13

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Extract, Print high-res
XMP Toolkit                     : 3.1-702
Producer                        : Acrobat Distiller 7.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2009:09:03 13:49:14+08:00
Create Date                     : 2009:09:03 13:41:47+08:00
Metadata Date                   : 2009:09:03 13:49:14+08:00
Format                          : application/pdf
Title                           : Microsoft Word - WN8522B-LF-MT Spec_04-27-2009_V0 3_Add FCC statement_增加OEM整合警語_0903-2009.doc
Creator                         : Gia
Document ID                     : uuid:a88f92c1-3e02-4319-bb4a-0053eb2d6d7b
Instance ID                     : uuid:7597ed65-f9b0-42cd-965a-0afc83066b61
Page Count                      : 13
Author                          : Gia

EXIF Metadata provided by EXIF.tools