Amtran Technology Co WB116C BT V4.0 LE Dual Mode Bluetooth Stereo Audio Module User Manual LiteOn Technology Corp

Download:
Mirror Download [FCC.gov]
Document ID	1998694
Application ID	+FeaTX9Fo8XAAVx0UkgEBg==
Document Description	user manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	32.94kB (411718 bits)
Date Submitted	2013-06-24 00:00:00
Date Available	2013-06-24 00:00:00
Creation Date	2013-06-24 09:29:57
Producing Software	Microsoft® Office Word 2007
Document Lastmod	2013-06-24 09:29:57
Document Title	LiteOn Technology Corp.
Document Creator	Microsoft® Office Word 2007
Document Author:	Tracy Chang

USER MANUAL
BT V4.0 LE Dual Mode Bluetooth Stereo Audio Module
WB116C
CSR 8640
Version 1.2
Networking B.U.
Lite-on Technology Corporation
4F, No. 90, Chien I Rd.,
Chung Ho, New Taipei City 235, Taiwan, R.O.C.
Phone: +886-2-2222-6181
Fax: +886-2-2221-5288
Contact: Product Marketing
Mr. ML Wu #8266
E-mail: ml.wu@liteon.com
Customer Approval:
(Signature)
(Title)
(Company)
(Date)
Page 1/6
PRODUCT FEATURES

Bluetooth V4.0 specification compliant Backwards compatible with BT version
of 1.1, 1.2, 2.0, 2.1+EDR





Dual-mode Bluetooth low energy radio
80MHz RISC MCU and 80MIPS Kalimba DSP
BT using SPI interface
Multipoint HFP connection to 2 phones for voice
Multipoint A2DP connection enables a headset(A2DP) connection to 2 A2DP
source devices for music playback

Secure simple paring, CSR’s proximity pairing and CSR’s proximity connection




SBC, MP3 and AAC decoder support
Fast AGC for enhanced dynamic range
RoHS compliance
Low Halogen compliance
Page 2/6
PRODUCT SPECIFICATIONS
MAIN CHIPSET
CSR 8640
FUNCTIONAL SPECIFICATIONS
BT Function
Standard
Bluetooth V4.0 LE
Bus Interface
SPI
Data Rate
1 Mbps, 2Mbps and Up to 3Mbps
Modulation Scheme
GFSK, π/4-DQPSK and 8-DPSK
Frequency Range
2.402~2.480 GHz
Transmit Output Power 0 ≤ Output Power ≤ +4 ; Class 2 Device
Receiver Sensitivity
< 0.1% BER at -82dBm
Operating Voltage
3.3 V ±9% I/O supply voltage
Power Consumption
Stereo high quality SBC:
15 mA
Idle Mode:
280 uA
Antenna Type
Metal Antenna
Page 3/6
FCC Statement:
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one of the following measures:
● Reorient or relocate the receiving antenna.
● Increase the separation between the equipment and receiver.
● Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
● Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may cause
undesired operation
LABEL OF THE END PRODUCT:
The final end product must be labeled in a visible area with the following " Contains
TX FCC ID: MDZ-WB116C
The OEM integrator is still responsible for the FCC compliance requirement of the end
product, which integrates this module.
Appropriate measurements (e.g. 15 B compliance) and if applicable additional equipment
authorizations (e.g. Verification , Doc) of the host device to be addressed by the
integrator/manufacturer.
Page 4/6
Baseband and Software
■ Internal ROM
■ Memory protection unit supporting accelerated VM
■ 56KB internal RAM, enables full-speed data
transfer, mixed voice/data and full piconet support
■ Logic for forward error correction, header error
control, access code correlation, CRC,
demodulation, encryption bit stream generation,
whitening and transmit pulse shaping
■ Transcoders for A-law, μ-law and linear voice from
host and A-law, μ-law and CVSD voice over air
CSR8600 ROM Series Configuration Tool
Configures the CSR8640 stereo ROM solution software
features:
■ Bluetooth v4.0 specification features
■ Reconnection policies, e.g. reconnect on power-on
■ Audio features, including default volumes
■ Button events: configuring button presses and
durations for certain events, e.g. double press on
PIO for last number redial
■ LED indications for states, e.g. headset connected,
and events, power on etc.
■ Indication tones for events and ringtones
■ HFP v1.6 supported features
■ Battery divider ratios and thresholds, e.g.
thresholds for battery low indication, full battery etc.
■ Advanced Multipoint settings
CSR8640 Stereo ROM Solution Development Kit
■ CSR8640 stereo ROM solution demonstrator board
(DB-8640-10085-1A)
■ Interface adapters and cables are available
■ Works in conjunction with the CSR8600 ROM
Series Configuration Tool and other supporting
Utilities
Page 5/6
Proximity Pairing
Proximity pairing is headset-initiated pairing and it simplifies the out-of-box pairing process. Proximity pairing
enables
the headset to find the closest discoverable phone. The headset then initiates the pairing activity and the user
simply
has to accept the incoming pairing invitation on the phone.
This means that the phone-user does not have to hunt through phone menus to pair with the new headset.
Depending on the phone UI:
■ For a Bluetooth v2.0 phone the headset pairing is with a PIN code
■ For a Bluetooth v2.1 (or above) phone the headset pairing is without a PIN code
Proximity pairing is based on finding and pairing with the closest phone. To do this, the headset finds the loudest
phone by carrying out RSSI power threshold measurements. The loudest phone is the one with the largest RSSI
power threshold measurement, and it is defined as the closest device. The headset then attempts to pair with
and
connect to this device.
Proximity pairing is configurable using the Headset Configurator tool available from www.csrsupport.com.
Page 6/6

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 6
Language                        : zh-TW
Tagged PDF                      : Yes
Title                           : LiteOn Technology Corp.
Author                          : Tracy Chang
Creator                         : Microsoft® Office Word 2007
Create Date                     : 2013:06:24 09:29:57+08:00
Modify Date                     : 2013:06:24 09:29:57+08:00
Producer                        : Microsoft® Office Word 2007

EXIF Metadata provided by EXIF.tools