Amtran Technology Co WN4608L 802.11n, 2.4G 1T1R Wireless LAN USB Module User Manual LiteOn Technology Corp
Amtran Technology Co Ltd 802.11n, 2.4G 1T1R Wireless LAN USB Module LiteOn Technology Corp
Users Manual
USER MANUAL 802.11n, 2.4G 1T1R Wireless LAN USB Module WN4608L Realtek RTL8188ETV Version 1.2 Networking B.U. Lite-on Technology Corporation 4F, No. 90, Chien I Rd., Chung Ho, New Taipei City 235, Taiwan, R.O.C. Phone: +886-2-2222-6181 Fax: +886-2-2221-5288 Contact: Product Marketing Mr. ML Wu #8266 E-mail: ml.wu@liteon.com (Signature) Customer Approval: (Title) (Company) (Date) Page 1/6 PRODUCT FEATURES Wi-Fi Feature Operate at ISM frequency Band (2.4GHz) IEEE Standards Support, 802.11b, 802.11g and 802.11n CMOS MAC, Baseband PHY, and RF in a single chip for IEEE 802.11b/g/n compatible WLAN Complies with USB Specification 2.0, support Full-speed(12Mbps) and High-Speed(480Mbps) Enterprise level security supporting: WPA, WPA2 Support 1 transmission and 1 receiving, transmission rate can up to 150Mbps (Physical Rate) in downstream and upstream RoHS compliance Low Halogen compliance Page 2/6 PRODUCT SPECIFICATIONS MAIN CHIPSET Realtek RTL8188ETV FUNCTIONAL SPECIFICATIONS Wi-Fi Function Standard IEEE802.11b; IEEE 802.11g; IEEE 802.11n Bus Interface USB 2.0 Data Rate 802.11b: 11, 5.5, 2, 1 Mbps 802.11g: 54, 48, 36, 24, 18, 12, 9, 6 Mbps 802.11n: MCS 0 to 7 for HT20MHz MCS 0 to 7 for HT40MHz Media Access Control CSMA/CA with ACK 802.11b: CCK, DQPSK, DBPSK 802.11g: Modulation Techniques 64QAM, 16QAM, QPSK, BPSK 802.11n: BPSK, QPSK, 16QAM, 64QAM Ad-hoc mode (Peer-to-Peer) Network Architecture Infrastructure mode 2.4GHz 11: (Ch. 1-11) – United States Operation Channel 13: (Ch. 1-13) – Europe 14: (Ch. 1-14) – Japan 802.11bg Frequency Range 2.412 ~ 2.4835 GHz 802.11b: 16 dBm@1Mbps 16 dBm@11Mbps 802.11g: 16 dBm@6Mbps 14 dBm@54Mbps Transmit Output Power – 1x1 802.11n: (Tolerance: ±1.5dBm) 20MHz: 16 dBm@MCS0 13 dBm@MCS7 40MHz: 13 dBm@MCS0 13 dBm@MCS7 802.11b: -82 dBm@11Mbps 802.11g: Receiver Sensitivity -70 dBm@54Mbps 802.11n: 20MHz Page 3/6 Security -68 dBm@MCS7 40MHz -65dBm@MCS7 WEP 64&128 bit, WPA, WPA-PSK, WPA2, WPA2-PSK, WPS, IEEE 802.1X, IEEE 802.11i Operating Voltage 3.3 V ±5% I/O supply voltage OS Supported Microsoft Windows Win7/Win8; Linux based Power Consumption Test Condition: - Operate at HT40 - File Transmission - Record MAX value Antenna Type TX Mode: 234 mA RX Mode: 162 mA Standby Mode: 147 mA Metal Antenna Page 4/6 FCC Statement: Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: ● Reorient or relocate the receiving antenna. ● Increase the separation between the equipment and receiver. ● Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ● Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation IMPORTANT NOTE: FCC Radiation Exposure Statement: This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provide with antenna installation instructions and consider removing the no-collocation statement. Page 5/6 LABEL OF THE END PRODUCT: The final end product must be labeled in a visible area with the following " Contains TX FCC ID: MDZ-WN4608L The OEM integrator is still responsible for the FCC compliance requirement of the end product, which integrates this module. Appropriate measurements (e.g. 15 B compliance) and if applicable additional equipment authorizations (e.g. Verification , Doc) of the host device to be addressed by the integrator/manufacturer. Page 6/6
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V4.4 (128-bit) User Access : Print, Extract Author : Tracy Chang Create Date : 2013:07:24 13:57:49+08:00 Modify Date : 2013:07:25 15:58:38+08:00 Language : zh-TW Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Format : application/pdf Creator : Tracy Chang Title : LiteOn Technology Corp. Creator Tool : Microsoft® Word 2010 Metadata Date : 2013:07:25 15:58:38+08:00 Producer : Microsoft® Word 2010 Document ID : uuid:5939c9dd-7734-439c-9fed-ac0af3c6be11 Instance ID : uuid:e2aecd2a-46cd-42db-a467-76c31a14f9ec Page Count : 6EXIF Metadata provided by EXIF.tools