Amtran Technology Co WN4631R 802.11n, 2.4G 1T1R Wireless LAN USB Module User Manual LiteOn Technology Corp
Amtran Technology Co Ltd 802.11n, 2.4G 1T1R Wireless LAN USB Module LiteOn Technology Corp
Users Manual
USER MANUAL 802.11n, 2.4G 1T1R Wireless LAN USB Module WN4631R MediaTek MT7601U Version 1.1 * This document contains confidential proprietary information and is property of LTC. The contents of this document should not be disclosed to unauthorized persons without the written consent of LTC Page 1/7 CONTENT PRODUCT FEATURES .................................................................................................................... 3 PRODUCT SPECIFICATIONS ........................................................................................................ 4 MAIN CHIPSET ....................................................................................................................................... 4 FUNCTIONAL SPECIFICATIONS ............................................................................................................... 4 FCC STATEMENT: ........................................................................................................................... 6 Page 2/7 PRODUCT FEATURES Operate at ISM frequency Band (2.4GHz) IEEE Standards Support, 802.11b, 802.11g and 802.11n Fully comply with USB 2.0 high speed mode Enterprise level security supporting: WPA, WPA2, WPS, WAPI One-stream IEEE 802.11n support for 20MHz and 40MHz bandwidth channels provides PHY layer rates up to 150Mbps Support Wi-Fi Direct RoHS compliance Low Halogen compliance Page 3/7 PRODUCT SPECIFICATIONS MAIN CHIPSET MAC/ Baseband/ RF: MediaTek MT7601U FUNCTIONAL SPECIFICATIONS Wi-Fi Function Standard IEEE802.11b; IEEE 802.11g; IEEE 802.11n Bus Interface USB2.0 Data Rate 802.11b: 11, 5.5, 2, 1 Mbps 802.11g: 54, 48, 36, 24, 18, 12, 9, 6 Mbps 802.11n: MCS 0 to 7 for HT20MHz MCS 0 to 7 for HT40MHz Media Access Control CSMA/CA with ACK 802.11b: CCK, DQPSK, DBPSK 802.11g: Modulation Techniques 64QAM, 16QAM, QPSK, BPSK 802.11n: 64QAM, 16QAM, QPSK, BPSK Ad-hoc mode (Peer-to-Peer) Network Architecture Infrastructure mode 2.4GHz 11: (Ch. 1-11) – United States Operation Channel 13: (Ch. 1-13) – Europe 14: (Ch. 1-14) – Japan 802.11bg Frequency Range 2.412 ~ 2.4835 GHz 802.11b: 16 dBm@11Mbps 802.11g: Transmit Output Power – 14 dBm@54Mbps 1x1 802.11n: (Tolerance: ±1.5dBm) 20MHz: 14 dBm@MCS7 40MHz: 12 dBm@MCS7 802.11b: -84 dBm@11Mbps 802.11g: -71 dBm@54Mbps Receiver Sensitivity 802.11n: 20MHz -70 dBm@MCS7 40MHz -67 dBm@MCS7 Page 4/7 Security WPA, WPA2, WPS, WEP 64b&128bit, IEEE 802.1X, IEEE 802.11i Operating Voltage 3.3V ± 5% I/O supply voltage OS Supported Microsoft Windows Win7/Win8; Linux based Power Consumption TX Mode: 802.11b 11Mbps : 285 mA 802.11g 54Mbps : 205mA 802.11n HT20 MCS7: 200mA 802.11n HT40 MCS7 : 185mA RX Mode: 148 mA Idle Mode: 130 mA Antenna Type Metal Antenna Page 5/7 FCC Statement: Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: ● Reorient or relocate the receiving antenna. ● Increase the separation between the equipment and receiver. ● Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ● Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation LABEL OF THE END PRODUCT: The final end product must be labeled in a visible area with the following "Contains TX FCC ID: MDZ-WN4631R The OEM integrator is still responsible for the FCC compliance requirement of the end product, which integrates this module. Appropriate measurements (e.g. 15 B compliance) and if applicable additional equipment authorizations (e.g. Verification, Doc) of the host device to be addressed by the integrator/manufacturer. Page 6/7 Page 7/7
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V4.4 (128-bit) User Access : Print, Extract Author : Tracy Chang Create Date : 2013:08:27 17:53:27+08:00 Modify Date : 2013:09:05 16:00:51+08:00 Language : zh-TW Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Format : application/pdf Creator : Tracy Chang Title : LiteOn Technology Corp. Creator Tool : Microsoft® Word 2010 Metadata Date : 2013:09:05 16:00:51+08:00 Producer : Microsoft® Word 2010 Document ID : uuid:b463bb91-342f-44a8-9a59-5e6d10da0885 Instance ID : uuid:51c377a1-b78c-4655-9ac6-b25ee9423a3c Page Count : 7EXIF Metadata provided by EXIF.tools