Amx Modero Nxd Cv5 Users Manual 0362932

2015-02-05

• Modero CV5 Operation/Reference Guide
  • Introduction
    • CV5 Specifications
    • CV5 Panels - Connector Layout
  • CV5 Touch Panel Accessories
    • NXA-AVB/ETHERNET Breakout Box (FG2254-10)
      • Product Specifications
      • Installing the NXA-AVB/ETHERNET
      • Wiring the NXA-AVB/ETHERNET connectors and cables
      • Wiring the NXA-AVB/ETHERNET for Unbalanced Audio
      • Wiring the NXA-AVB/ETHERNET for Balanced Audio
  • Installation
    • Unpacking the Panel
    • Installing the No-Button Trim Ring
    • Installing the Button Trim Ring
    • Installing the Optional NXA-BEZ Colored Trim Ring Kits
    • Pre-Wall Installation of the Rough-In Box
    • Installation of an NXD Touch Panel
      • Installing the NXD panel within a Rough-In Box
      • Installing the NXD into drywall using Expansion Clips
      • Installing the NXD into a Flat Surface using #4 screws
      • Installing an NXD-CV5 into a Rack Mount Kit (NXA-RK5)
    • Wiring Guidelines for the CV5 Panels
      • Preparing captive wires
      • Wiring a power connection
    • Audio/Video Port: Connections and Wiring
    • Ethernet/RJ-45 Port: Connections and Wiring
    • USB Port: Connecting and Using Input Devices
  • Panel Calibration
    • Calibrating the Modero Panel
      • Testing your Calibration
  • Configuring Communication
    • Modero Setup and System Connection
    • Configuring and Using USB with a Virtual Master
      • Step 1: Setup the Panel and PC for USB Communication
      • Step 2: Confirm the Installation of the USB Driver on the PC
      • Step 3: Confirm and View the current AMX USB device connections
      • Step 4: Use the USB to Configure a Virtual Master (using NetLinx Studio)
      • Step 5: Confirm and View the current AMX USB device connections
    • Configuring a Wired Ethernet Connection
    • Step 1: Configure the Panel’s Wired IP Settings
      • IP Settings section - Configuring a DHCP Address over Ethernet
      • IP Settings section - Configuring a Static IP Address over Ethernet
    • Step 2: Choose a Master Connection Mode Setting
    • Step 3: Configure an Ethernet Connection Type
      • Master Connection section - Virtual Master communication over Ethernet
      • Master Connection section - NetLinx Master Ethernet IP Address - URL Mode
      • Master Connection section - NetLinx Master Ethernet IP Address - Listen Mode
      • Master Connection section - NetLinx Master Ethernet IP Address - Auto Mode
    • Using G4 Web Control to Interact with a G4 Panel
    • Using your NetLinx Master to control the G4 panel
  • Upgrading Modero Firmware
    • Upgrading the Modero Firmware via the USB port
      • Step 1: Configure the panel for a USB Connection Type
      • Step 2: Prepare NetLinx Studio for communication via the USB port
      • Step 3: Confirm and Upgrade the firmware via the USB port
    • Upgrading the Modero Firmware via Ethernet (IP Address)
      • Step 1: Prepare the Master for communication via an IP
      • Step 2: Prepare the panel for communication via an IP
      • Step 3: Verify and Upgrade the panel firmware via an IP
  • Firmware Pages and Descriptions
    • Setup Navigation Buttons
    • Protected Setup
    • Setup Page
    • Information
      • Project Information Page
      • Panel Information Page
      • Time & Date Setup Page
      • Audio Settings Page
      • Supported sampling rates for WAV
      • Video Adjustment Page
    • Protected Setup Navigation Buttons
    • Protected Setup Page
      • System Settings Page
      • Calibration Page
      • G4 Web Control Page
      • Sensor Setup
      • Making the most of the Automated Brightness Control feature (DIM Mode)
    • Other Settings
      • Image Caching Page
      • Setting the image cache
      • Clearing the image cache
      • Checking image cache status
      • Password Settings Page
    • Tools
      • Panel Logs Page
      • Checking the Panel Connection Logs
      • Refreshing the Panel Connections Log
      • Clearing the Panel Connections Log
      • Panel Statistics Page
      • Checking the Panel Statistics
      • Refreshing the Panel Statistics
      • Clearing the Panel Statistics
      • Connection Utility Page
      • Using the Connection Utility
      • Secondary Connection Page
  • Programming
    • Button Assignments
    • Page Commands
    • Programming Numbers
      • RGB triplets and names for basic 88 colors
      • Font styles and ID numbers
      • Border styles and Programming numbers
    • "^" Button Commands
    • Text Effect Names
    • Button Query Commands
    • Panel Runtime Operations
    • Input Commands
    • Embedded codes
    • Panel Setup Commands
    • Dynamic Image Commands
  • Troubleshooting
  • Appendix A
    • Text Formatting Codes for Bargraphs/Joysticks
    • Text Area Input Masking
      • Input mask character types
      • Input mask ranges
      • Input mask next field characters
      • Input mask operations
      • Input mask literals
      • Input mask output examples
    • URL Resources
      • Special escape sequences