Andersen CA00010519901 Anderson Transmitter Model # 0105199 User Manual CERTIFICATE OF COMPLIANCE

Download:
Mirror Download [FCC.gov]
Document ID	1159635
Application ID	3w5yko2WY7GiWv9HZ98T2g==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	1.28kB (16005 bits)
Date Submitted	2009-08-26 00:00:00
Date Available	2009-08-26 00:00:00
Creation Date	2009-08-24 16:15:36
Producing Software	Adobe PDF Library 9.0
Document Lastmod	2009-08-24 16:15:55
Document Title	CERTIFICATE OF COMPLIANCE
Document Creator	Acrobat PDFMaker 9.1 for Word
Document Author:	Systems Administrator

Rhein Tech Laboratories, Inc.
360 Herndon Parkway
Suite 1400
Herndon, VA 20170
http://www.rheintech.com
Ap p e n d ix G:
Ma n u a l
Please see the following page.
Client:
Model:
Standard:
FCC ID:
Report #:
Andersen Corporation
0105199
FCC 15.231
WVJ-CA00010519901
2009233
User Manual
1. Unlock the lower sash by rotating the lock handles
partially toward the center (to the “unlock” position on
each lock bezel).
2. Lift the sash about 3 in.
3. Push both lock handles fully toward the center (to the
“wash” position on each lock bezel).
4. Once the sash is released, tilt it 90 degrees toward you.
Rest the sash on the chair or other object.
5. Locate the battery compartment on the exterior of the
right hand sash lock.
6. Using a small flat screwdriver, pry the battery tray from
the sensor.
7. Remove the discharged battery (see battery disposal
information).
8. Replace battery with a fresh CR-2032 lithium coin-cell
battery into the tray, with the positive (+) terminal on top,
as indicated by the “+” marking on the battery tray.
9. Reinsert the battery tray halfway into the opening on the
sash lock.
10. Upon successful verification of battery polarity, fully push
the battery tray into the sensor so that it is flush with the
lock bezel.
11. Return sash to the opening. Tilt the lower sash upward
into the window frame until it re-engages with the jamb
liner.
12. Lower the sash to the closed position and lock the unit.
13. Verify that the sensor is communicating with the security
control panel by unlocking the window and checking the
control panel for the window unlock message and then
open the window and check the control panel for the
window open message.
Changes or modifications not expressly approved by Andersen Corporation could void the user’s
authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
FCC ID: WVJ-CA00010519901

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Author                          : Systems Administrator
Create Date                     : 2009:08:24 16:15:36-07:00
Modify Date                     : 2009:08:24 16:15:55-07:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Metadata Date                   : 2009:08:24 16:15:55-07:00
Creator Tool                    : Acrobat PDFMaker 9.1 for Word
Format                          : application/pdf
Title                           : CERTIFICATE OF COMPLIANCE
Creator                         : Systems Administrator
Document ID                     : uuid:32b8d0e1-bc26-40fa-ab82-6e2eaeea51cc
Instance ID                     : uuid:2ab1c93c-9596-46ae-8bff-0008e526aa93
Producer                        : Adobe PDF Library 9.0
Page Count                      : 2

EXIF Metadata provided by EXIF.tools