Andersen CB00010522402 INTRUSION DETECTOR SENSOR User Manual Users Guide

Andersen Corporation INTRUSION DETECTOR SENSOR Users Guide

Users Guide

Download: Andersen CB00010522402 INTRUSION DETECTOR SENSOR User Manual Users Guide
Mirror Download [FCC.gov]Andersen CB00010522402 INTRUSION DETECTOR SENSOR User Manual Users Guide
Document ID1696936
Application IDcQMZqVNLRuvoQ12GTRT+0A==
Document DescriptionUsers Guide
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize220.8kB (2760057 bits)
Date Submitted2012-05-14 00:00:00
Date Available2012-05-14 00:00:00
Creation Date2010-10-27 14:14:02
Producing SoftwareAdobe PDF Library 8.0
Document Lastmod2011-01-21 13:03:32
Document TitleUsers Guide
Document CreatorAdobe InDesign CS3 (5.0.4)

User’s Guide
User’s Guide
for Eagle VeriLock™ Integrated Security Sensors
VeriLock
TM
Limited Publication Release
Eagle Window & Door is proud to introduce VeriLock™ integrated security sensors, an innovative security option
that integrates wireless security sensors into Eagle® window and door products. The sensors, when ordered, are
embedded within our windows and doors and can detect when the product is open or closed. The sensors also
detect whether the product is locked or unlocked, something other security sensors are not able to do. This
enables a simplified “check the windows and doors routine” at bedtime or departure. Additionally, all Eagle
sensors, when used with a third party security and monitoring system, can be monitored and armed, even when
you’re not home.
With integrated sensors, the beauty of Eagle products is maintained without unsightly wires, sensors or holes.
Plus, the product warranty is maintained. Generally, third party security systems can void the manufacturer’s
warranty with the installation of sensors and wires on windows and doors.
Eagle windows and doors with VeriLock integrated security sensors are designed to work in conjunction with a
security system that is compatible with Honeywell® 5800 Series transmitters installed and monitored by a
reputable security dealer.
When properly integrated into a third party security
system, Eagle’s VeriLock sensors are designed to:
To experience the full benefits of VeriLock sensors,
an experienced security system dealer is required to:
• 		 Detect whether your Eagle window or door is open
		 or closed
•		 Select and install a security system compatible with
		 Honeywell 5800 Series transmitters
•		 Detect whether your Eagle window or door is
		 locked or unlocked
•		 Specify a system to accommodate the number of
		 Eagle windows and doors in the dwelling
•		 Communicate changes in open/close and lock/
		 unlock wirelessly in a format compatible with
		 Honeywell 5800 Series transmitters
•		 Configure each VeriLock sensor into the specified
		 security system, as each sensor has its own unique
		 identification code permanently assigned
•		 Monitor sensor battery level and communicate low
		 battery state in a format compatible with
		 Honeywell 5800 Series transmitters
•		 Program the security system using Eagle’s
		 recommended zone descriptors
•		
•		
Deliver comparable range to other wireless
sensors based on Federal Communications
Commission (FCC) regulations that limit RF
transmit power levels
Adjust the system for wireless range deficiencies
due to size or layout of home through the use of
wireless repeaters and/or additional wireless
receivers
Eagle Window & Door is not affiliated with Honeywell. Eagle’s VeriLock sensors are independent of the security
system, yet communicate with it to provide added features and benefits for windows and doors that only Eagle can
offer.
“Eagle” and all other marks denoted are trademarks of Eagle Window & Door Manufacturing, Inc. and its parent company. “Honeywell” is a registered trademark of
Honeywell International Inc. ©2010 Eagle Window & Door Manufacturing, Inc. All rights reserved.
User’s Guide
Table of Contents
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  1
Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2
General Safety Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2
Operating Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3
How Sensors Work . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3
Locking Windows and Doors  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3
Keypad and Control Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3
Verification Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4
Battery Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  5
Battery Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  5
Battery Size and Quantity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  5
Battery Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  5
Battery Availability  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  5
Battery Life . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  5
Battery Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  5
Battery Replacement Instructions  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 - 9
Tools Needed for Battery Replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  6
Casement and Awning Windows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Double-Hung and Single-Hung Windows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7
Monumental Single-Hung Windows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  8
Hinged French Doors  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  9
Sliding Door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  10
Finishing and General Care  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 12
Finishing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  10
Cleaning Hardware and Sensors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  12
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 - 14
Frequently Asked Questions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  13
Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  15
Regulatory Statements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  16
Federal Communications Commission (FCC) Part 15 Statement  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  16
Limitations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  16
Limited Warranty for Eagle® Windows and Doors with VeriLock™ Integrated Security Sensors . . . . . . . . . . . . . 17 - 20
General Safety Warnings
Do not leave openings unattended
when small children are present.
Falling from an opening may result in
serious injury or death.
Follow manufacturer’s instructions for
hand or power tools. Always wear
safety glasses. Failure to do so may
result in injury and/or product damage.
User’s Guide
Double-Hung, Single-Hung
and Monumental Single-Hung Windows
Operating Instructions
How Sensors Work
Lock Lever
Sensors are integrated within the locking
mechanisms. When properly configured into the
security system, a sensor within the lock signals when
the window is in the closed position. When the
locking mechanism is engaged, a second signal is
sent to the control panel indicating that the window or
door is locked.
WASH
WASH
Locked
Unlocked
Hinged French Doors – To lock the door, first move
the door panel to the closed position and allow the
multi-point locking mechanism to engage at top,
center and bottom. Then turn the thumb turn latch to
the horizontal position.
Locking Windows and Doors
Casement and Awning Windows – To lock the
window, first close the window sash. Then push the
sash lock lever(s) on the side jamb(s) from the upper
position to the lower position.
Hinged French Doors
Thumb Turn
Latch
Casement and Awning Windows
Lock Lever
Side Jamb
Unlocked
Unlocked
Locked
Sliding Doors – To lock the door, first slide
the door panel to the closed position. Then turn the
thumb turn latch to the horizontal position.
Lever Up
Sliding Doors
Side Jamb
Thumb Turn
Latch
Lock Lever
Locked
Lever Down
Unlocked
Double-Hung, Single-Hung and Monumental SingleHung Windows – To lock the window, first make sure
that both window sash are in the closed position.
Then rotate each lock lever toward its respective side
jamb (left sash lock illustrated above right).
Locked
Keypad and Control Panel
For limited warranty information and details regarding
operation and limitations of your third party security
system, please refer to the User’s Guide included with
your compatible security system. Contact your
security system dealer for troubleshooting and
concerns regarding the keypad and control panel.
User’s Guide
Verification Instructions
1.		 Open window/door and look for a “FAULT”
		 message associated with window/door open on
		 keypad.
FAULT 10 KITCHEN
WINDOW OPEN
ARMED
OFF
AWAY
STAY
READY
MAX
TEST
BYPASS
INSTANT
CODE
CHIME
READY
Example of Keypad Monitoring Device
2.		 Close window/door and look for a “FAULT”
		 message associated with window/door unlocked
		 on keypad.
FAULT 11 KITCHEN
WINDOW UNLOCKED
ARMED
OFF
AWAY
STAY
READY
MAX
TEST
BYPASS
INSTANT
CODE
CHIME
READY
Example of Keypad Monitoring Device
3.		 Lock window/door and verify that no message
		 associated with window/door appears on
		 keypad.
****DISARMED ****
READY TO ARM
		 If all other window/doors are closed and locked
		 the message should read:
****DISARMED****
READY TO ARM
ARMED
OFF
AWAY
STAY
READY
MAX
TEST
BYPASS
INSTANT
CODE
CHIME
READY
Example of Keypad Monitoring Device
Note 1: “FAULT” messages associated with other windows/doors may be present on keypad during verification
process. It may be helpful to close and lock all other windows that are part of the security system to avoid
confusion.
Note 2: Example messages provided above are accurate only if security system dealer follows Eagle’s
recommended zone descriptors during system configuration.
User’s Guide
Battery Information
Battery Type:
provided by the Eagle limited warranty for VeriLock™
integrated security sensors.
Lithium Coin Cell Battery
Battery Size and Quantity:
Batteries carry the risk of fire, explosion and burns.
Do not recharge, disassemble, heat above 212
degrees F (100 degrees C) or incinerate. Dispose of
used batteries promptly and properly. Keep away
from children.
For Casement Window: CR-1632 (2 per window)
For Double-Hung Window: CR-2032 (1 per window)
For Single-Hung Window: CR-2032 (1 per window)
For Monumental Single-Hung Window: CR-2032
(1 per window)
For Hinged French Door: CR-1632 (2 per door)
For Sliding Door: CR-1632 (2 per door)
Lithium Coin Cell Batteries
Battery Specifications:
Size: CR1632
Classification: Lithium Coin Cell
Chemical System: Lithium/Manganese Dioxide
(Li/MnO2)
Nominal Voltage: 3.0 Volts
Typical Capacity: 130 mAh (to 2.0 volts)
Size: CR2032
Classification: Lithium Coin Cell
Chemical System: Lithium/Manganese Dioxide
(Li/MnO2)
Nominal Voltage: 3.0 Volts
Typical Capacity: 240 mAh (to 2.0 volts)
Battery Disposal:
Battery Availability:
Lithium/Manganese Dioxide batteries are United
States Resource Conservation and Recovery Act
(RCRA) non-hazardous waste. However, it’s always a
best practice to dispose of your batteries at your local
Home Chemical Collection Center.
3.0 Volt lithium batteries are readily available at most
department, hardware or drug stores in a variety of
brands.
Battery Life:
California Only: Perchlorate Material – special handling
may apply. See www.dtsc.ca.gov/hazardouswaste/
perchlorate.
Most 3.0 Volt lithium batteries will provide years of
operation. Actual battery life is dependent upon the
environment in which the sensor is used and the
number of signals the sensor has had to send. Other
factors such as humidity, temperature extremes or
large fluctuations, may all lead to reduction of battery
life. Batteries are not included in the coverage
User’s Guide
Battery Replacement Instructions
Batteries are small parts and, if swallowed, could
pose a choking hazard to young children.
the battery tray is facing upward. Continue to fully
push the battery tray in. The battery tray will
encounter several points of light resistance as the
batteries contact the sensor.
When replacing the battery, do not touch any of
the circuitry on the sensor. Static from your
body could damage the sensor.
8.		
Verify the proper battery polarity by observing the
L.E.D. light illumination during the battery
insertion. If the L.E.D. does not illuminate, check
to make sure Steps 6 and 7 were followed
correctly and insert the battery tray in sensor.
9.		 Replace the lock bezel.
When a low battery is detected in a wireless sensor, a low
10.
battery message will display on your keypad when properly 11.
configured with your security system.
Tools Needed for Battery Replacement:
The tools needed are dependent upon the product in
which the batteries are being replaced.
• Safety glasses
• Flashlight
• Small needle nose pliers
• Phillips screwdriver
Close and lock the window unit.
Verify that the sensor is communicating with the
security control panel by unlocking the window
and checking the keypad for the window unlock
message and then opening the window and
checking the keypad for the window open
message. See page 4 for verification instructions.
Casement and Awning Windows
• Small flat head screwdriver
Lock
Lever
Lock
Lever
Casement and Awning Windows
1. Move the window lock lever(s) from the lower locked
			 position to the center position. The sash can be
			 opened or closed.
2.		
Remove the lock bezel using a small flat head
screwdriver, taking care not to scratch the wood or
lock bezel (right-hand lock for awning windows).
Removal of the lock lever is not necessary.
3.		
Below the lock lever in the lock bezel opening, locate
the battery tray tab. Due to the recessed location of
this tab, the use of a flashlight may be necessary to
illuminate the work area.
Arrow Up
4.		 Using a small needle nose pliers, carefully pull on the
			 tab to remove the battery tray.
Battery
Battery
Tray
Tab
Tray
Arrow
Side
Jamb
5.		 Remove the discharged batteries (see battery disposal
			 information on page 5).
6.		
Replace the batteries with two fresh CR-1632 lithium
coin cell batteries. Take care to properly position the
“+” terminals of both batteries to correspond with the
“+” marking on the battery tray for proper battery
polarity.
7.		 Again using a small needle nose pliers, insert the
			 battery tray making sure the arrow on the face of
Battery Tray
Lock
Bezel
Interior View
User’s Guide
Battery Replacement Instructions - continued
Double-Hung and Single-Hung Windows
Before you begin battery replacement, place a
freestanding object, such as a chair, under the window to
support the lower sash while tilted.
1.		 Unlock the lower sash by rotating the lock levers
			 partially toward the center (to the “unlock” position on
			 each sash lock cover).
2.		 Lift the sash about 3 inches.
Double-Hung and Single-Hung Windows
Exterior Side Up
Lower
Sash
Battery Tray
3.		 Push both lock levers fully toward the center (to the
			 “wash” position marked on each sash lock cover).
4.		 Once the sash is released, tilt it 90 degrees toward
			 you. Rest the sash on a chair or other object.
5.		 Locate the battery compartment on the exterior of the
			 right sash lock.
6.		 Using a small flat head screwdriver, carefully pry the
			 battery tray from the sensor.
Sash
Lock
Cover
Battery
Tray
7.		 Remove the discharged battery (see battery disposal
			 information on page 5).
8.		
Replace the battery with a fresh CR-2032 lithium coin
cell battery into the tray, with the positive (+) terminal
on top, as indicated by the “+” marking on the battery
tray for proper battery polarity.
To
Wash
9.		 Insert the battery tray into sensor with the “+”
			 marking toward the top of the sash lock. Push in the
			 battery tray so that it is flush with the sash lock cover.
10. Return the sash to the opening. Tilt the lower sash
			 upward into the window frame until it engages with
			 the jamb liner.
Wash Position
11. Lower the sash to the closed position and lock the
			 unit.
12.
Lock
Lever
Right
Sash
Lock
WASH
Verify that the sensor is communicating with the
security control panel by unlocking the window and
checking the keypad for the window unlock
message and then opening the window and checking
the keypad for the open message. See page 4 for
verification instructions.
Interior View
with Sash
Tilted Inward
User’s Guide
Battery Replacement Instructions - continued
Monumental Single-Hung Windows
Monumental Single-Hung Windows
1.		 Close the unit (upper and lower sash) and lock the left
			 sash lock.
2.		
Battery
Tray
Remove the plastic/metal screw cap on the right lock
lever using a small flat head screwdriver. Take care
not to scratch the finish of the plastic/metal screw
cap.
Phillips
Screwdriver
3.		 Using a Phillips screwdriver, loosen and remove the
			 right lock lever screw.
Screw Cap
Lock Lever Screw
4.		 Remove the right lock lever and washer and keep with
			 the lock lever screw for reassembly later.
Lock Lever
Sash
Lock Cover
Washer
5.		 Remove the right sash lock cover to expose the
			 sensor.
Battery
Tray
6.		 Carefully remove the battery tray from the sensor.
			 The sensor is tethered to the sash by an antenna wire.
Sensor
Significant movement of the sensor could cause
damage to the antenna solder joint, resulting in poor
sensor operation.
Right
Sash
Lock
7.		 Remove the discharged battery (see battery disposal
			 information on page 5).
8.		
Replace the battery with a fresh CR-2032 lithium coin
cell battery. Take care to properly position the “+”
terminal of the battery to correspond with the “+”
marking on the battery tray for proper polarity.
9.		 Insert the battery tray half way back into the sensor.
			 Look for the L.E.D. light adjacent to the battery
			 opening to illuminate to verify proper battery polarity.
Lower
Sash
10. If the L.E.D. light does not illuminate, remove the
			 battery tray and verify for proper battery polarity.
11. Upon successful illumination of the L.E.D. light,
			 carefully seat the battery tray fully into the sensor.
12.
Place the right lock lever and sash lock cover over the
sensor and fasten using the lock lever screw. Note: To
help protect the lock mechanism, hand tightening is
recommended.
13.
Prior to replacing the plastic/metal screw cap, verify
the sash lock is functioning properly by unlocking
both sash locks, opening the window, closing the
window and locking both the sash locks.
Interior View
15.
14. Replace the plastic/metal screw cap.
Verify that the sensor is communicating with
the security control panel by unlocking the
window and checking the keypad for the window
unlock message and then opening the window
and checking the keypad for the window open
message. See page 4 for verification
instructions.
User’s Guide
Battery Replacement Instructions - continued
Hinged French Doors
Hinged French Doors
1.		 Unlock and open the door panel. Secure the door
			 panel in the open position (e.g. chair).
2.		 Locate the battery tray at the top of the center
			 strike plate in the door jamb.
3.		 Using a small needle nose pliers, grip the center
			 of the battery tray to remove. Take care to avoid
			 scratching the center strike plate finish.
Battery
Tray
4.		 Remove the discharged batteries (see battery
			 disposal information on page 5).
5.		
Replace the batteries with two fresh CR-1632
lithium coin cell batteries. Take care to properly
position the “+” terminals of both batteries to
correspond with the “+” marking on the battery
tray for proper battery polarity.
6.		
Insert the battery tray back into the sensor
through the opening in the center strike plate. The
tray may encounter light resistance during
insertion. Continue until the outside edge of the
battery tray is flush with center strike plate.
Battery
Tray
7.		 Close and lock the door unit.
8.		
Center
Strike
Plate
Verify that the sensor is communicating with the
security control panel by unlocking the door and
checking the keypad for the door unlock message
and then opening the door and checking the
keypad for the door open message. See page 4
for verification instructions.
Small
Needle Nose Pliers
Door
Jamb
Interior View
User’s Guide
Battery Replacement Instructions - continued
Sliding Doors
Sliding Doors
1.		 Unlock and open the door panel.
2.		 Locate the battery tray above the keeper on the
			 door jamb.
3.		 Using a small needle nose pliers, grip the center of
			 the battery tray to remove from the sensor cover
			 plate.
4.		 Remove the discharged batteries (see battery
			 disposal information on page 5).
5.		
Replace the batteries with two fresh CR-1632
lithium coin cell batteries. Take care to properly
position the “+” terminals of both batteries to
correspond with the “+” marking on the battery
tray for proper battery polarity.
6.		
Insert the battery tray back into the sensor cover
plate. The tray may encounter light resistance
during insertion. Continue until the outside edge
of the battery tray is flush with the plate.
Sensor
Cover
Plate
Battery
Tray
Battery
Tray
7.		 Close and lock the door unit.
8.		
Verify that the sensor is communicating with the
security control panel by unlocking the door and
checking the keypad for the door unlock message
and then opening the door and checking the
keypad for the door open message. See page 4
for verification instructions.
Small
Needle Nose Pliers
Interior View
Keeper
Door
Jamb
Finishing and General Care
Finishing
•		 Read and follow the care and maintenance
			 instructions for you Eagle® windows and doors
			 available online at EagleWindow.com.
•		
Mask the hardware to make sure that no paint and
finishing products are allowed to come in contact
with the hardware during the finishing processes.
If you need to remove the lock bezel and lock lever
from casement or awning windows, insert a
protective mask over the bezel opening to protect
the sensor.
In lieu of removing double-hung hardware during
the finishing process, simply mask the sash lock
assemblies with painter’s tape to protect them and
the sensor. Also mask off the locking
mechanisms on the outside edge of the sash.
Hinged door center strike plates can be easily
masked with painter’s tape to protect the center
strike plate and sensor. Carefully set any removed
hardware aside.
			 The sliding door keeper and sensor cover plate is
			 easily masked with painter’s tape to protect all
			 components.
When applying casing on the strike jamb side of
doors, make sure fasterners are located above and
below the strike or keeper, so as not to damage the
security components.
10
User’s Guide
Finishing and General Care - continued
Masking Casement and Awning Window Sensors
Masking Hinged French Door Strike and Sensor
If the lock bezel and lock lever are removed prior
to finishing, fill the bezel opening with a protective
mask such as painter’s tape,
paper towel or
foam.
Mask the hinged door center strike plate and sensor
on the side jamb with painter’s tape prior to finishing.
Painter’s
Tape
Side
Jamb
Side Stop
Center
Strike Plate
Interior View
Interior View
Masking Double-Hung and Single-Hung Window
Locks and Sensors
Masking Sliding Door Keeper
and Sensor Cover Plate
Mask the entire sash lock assembly including
the locking mechanism on the outside edge with
painter’s tape prior to finishing.
Painter’s
Tape
Mask the sliding door keeper and sensor plate on the
side jamb with painter’s tape prior to finishing.
Locking
Mechanism
Painter’s
Tape
Sensor
Cover
Plate
Keeper
Side
Jamb
Sash
Lock
Assembly
Interior View
Interior View
Sanding, staining, painting, varnishing and other
finishing procedures should always be done in wellventilated areas. Follow all manufacturer’s
instructions. Failure to do so may result in injury or
illness.
Finish wood surfaces immediately after installation.
Unfinished wood will deteriorate, discolor, and/or
may bow and split. Do not stain or paint hardware or
its components. Product damage may occur.
11
User’s Guide
Finishing and General Care - continued
•		 When reassembling the hardware, note that casement and awning lock levers are handed and the magnets
			 should always be located to the bottom of the lock lever (see illustration below).
			 In the instance the sash locks were removed on double-hung or single-hung windows, make sure they get
			 installed back to the correct location. The double-hung and single-hung sash lock covers are handed (see
			 illustration below). The sensor is always located in the right sash lock.
Reassembling Casement
and Awning Window Hardware
Reassembling Double-Hung, Single-Hung and
Monumental Single-Hung Window Hardware
Note: The locked, unlocked and tilt markings on the
sash lock covers are handed.
Lock Lever
Left Sash Lock
WASH
Correct
Magnet
Location
Lock Lever
Sash Lock
Cover
Incorrect
Magnet
Location
Right Sash Lock
WASH
Lock Lever
Sensor is always
located in right
sash lock.
Unlocked position
as viewed from interior
Cleaning Hardware and Sensors
Do not spray water or any other cleaning fluids on the
sensors or batteries. Product damage may occur.
•		 Treat the components of your system as you
			 would any other electrical equipment. Do not
			 slam sensor-protected doors or windows.
Interior View
12
•		
Maintain the operating hardware on windows and
doors. Keep operating devices, locks, keepers,
sensors and other parts free of dirt and debris.
Use a small, soft bristled brush or soft, clean, dry
cloth for cleaning.
•		
After cleaning, lubrication of moving hardware
parts can be done with a dry silicone spray. Do
not use heavy oil lubricants that may collect
corrosive particles.
User’s Guide
Troubleshooting
Frequently Asked Questions
Questions
Answers
1. How long will the VeriLock™ sensor batteries last?
1.		
2.		 Who do I call for help?
2.		 For questions regarding your security system itself
		 or monitoring services, contact your security
		 system dealer.
3.		 What if the VeriLock™ sensors do not work?
Most 3.0 Volt lithium batteries will provide years
of operation. Actual battery life is dependent upon
the environment in which the sensor is used and
the number of signals the sensor has had to send.
Other factors such as humidity, temperature
extremes or large fluctuations, may all lead to
reduction of battery life. Batteries are not covered
under the limited warranty.
For questions regarding your Eagle® windows and
doors with VeriLock integrated security, contact
your Eagle window and door dealer. For the dealer
nearest you, visit “Where to Buy” at
EagleWindow.com.
3.		 Pull out the battery tray and make sure the battery
		 is positioned correctly with the positive (+)
		 terminal on top.
4.		 What does the message “LO BAT” mean?
See battery replacement instructions on pages
5 - 8. Then follow the verification steps noted on
page 4. If the problem still exists, contact your
Eagle® window and door dealer.
4. Indicates that there is a low battery condition
		 detected in a sensor. This is followed by a
		 numbered zone descriptor.
		 Replace the battery following the battery
		 replacement instructions on pages 5 - 8.
LO BAT 19 KITCHEN
WINDOW
ARMED
OFF
AWAY
STAY
READY
MAX
TEST
BYPASS
INSTANT
CODE
CHIME
READY
Example of Keypad Monitoring Device
13
User’s Guide
Troubleshooting - continued
Frequently Asked Questions
Questions
Answers
5.		 What does the message “CHECK” mean?
5. A “CHECK” message will appear on the system
		 keypad when a sensor is identified as
		 inoperative.
CHECK 19 KITCHEN
WINDOW OPEN
ARMED
OFF
AWAY
STAY
READY
MAX
TEST
BYPASS
INSTANT
CODE
CHIME
READY
The “CHECK” message may also be caused by a
change in the environment that prevents the
wireless receiver from receiving messages from a
particular sensor.
Check to make sure the battery is good. See
battery replacement instructions on pages 5 - 8.
Then follow the verification steps noted on page 4.
If the problem still exists, contact your Eagle
window and door dealer.
Example of Keypad Monitoring Device
For all other keypad message questions, please review the user’s guide for your security system or contact your
security system dealer.
14
User’s Guide
Glossary
Awning window: Hinged at the top, this window has a
single sash that opens outward from the bottom.
Lock bezel: The trim component of casement sash lock
hardware.
Battery tray: A small plastic enclosure that holds the
battery for each sensor.
Lock lever: The operating lever component of casement
and/or double-hung sash lock hardware.
Casement: A window with side hinges that opens
outward from either the right or left.
Meeting rail (also lock rail): One of the two horizontal
members of a double-hung sash that come together. A
check rail.
Casement operator: A hardware device used to operate a
casement window to any open position.
Panel: Framework of stiles and rails in which the glass
of a sliding or hinged door is set.
CHECK: Message indicating an inoperative sensor.
READY TO ARM: Message indicating that the security
system is ready to be activated.
Check rail: On a double-hung window, the bottom rail of
the upper sash and the upper rail of the lower sash,
where the lock is mounted.
RF transmit power levels: The power levels in which
radio frequencies are transmitted and regulated by the
Federal Communications Commission (FCC).
Control panel: The central security system monitoring
device in which the sensors communicate.
Sash: Framework of stiles and rails in which the glass of
a window is set.
Crank handle: A handle that attaches to an awning or
casement operator, used to open the venting window.
Sash lock: A lock applied to the window to pull the sash
tightly against the frame (casement) or to pull the check
rails together (double-hung) in order to seal the sash
from weather and for security.
DISARMED: Message indicating that the security system
has been deactivated.
Double-hung window: A window with two vertically
moving sashes, each closing a different part of the
window.
Sash lock cover: The trim component of double-hung
hardware that covers the sensor.
FAULT: Message indicating an event a sensor is
monitoring is detected such as the opening or unlocking
of a window.
Sensors: A security device embedded within windows
and doors to monitor events, and when detected, report
the events back to the security system control panel.
Frame: An enclosure or combination of parts that
surround a window sash or door panel.
Side jamb (also jamb): The vertical members at the side
of the window or door frame.
Head jamb (also head): All of the horizontal members
that make up the top of the window or door frame.
Side stop: A wood side trim member attached to a
window frame to hold, position or separate window
parts.
Hinged French doors: Hinged door(s) that have wider
panel members around the glass.
Single-hung window: Window similar to double-hung
window, except the top sash is stationary.
Integrated security: Security sensor technology
embedded in Eagle® windows and doors that
communicates when the window or door is open/closed
and locked/unlocked.
Sliding doors: Operating panel(s) slide, eliminating the
need for the additional room space that a hinged door
requires. Available with narrow or wide panel members.
Keypad: A security system monitoring device which
displays transmitted information and allows the user to
control all system functions of the security system.
Strike plate: The protective metal plate installed in the
door jamb that receives the latch or dead bolt lock when
the door is closed.
Lithium coin cell battery: A small low-voltage battery
designed for use in watches, calculators and similar
compact portable electronics products.
Transmitter: An electronic device, which usually with the
aid of an antenna, propagates an electromagnetic signal.
Zone descriptors: The description programmed into the
security system control panel that identifies (1) sensor
location (e.g., kitchen), (2) sensor type (e.g., window)
and (3) sensor status (e.g., open).
L.E.D.: Light-emitting diode - An electronic light source
emitting low-intensity light.
LO BAT: Message referring to a low battery detected in a
sensor.
15
User’s Guide
Regulatory Statements
Federal Communications Commission (FCC) Part 15 Statement
This device complies with FCC Rules Part 15. Operation is subject to the following two conditions:
1.		 This device may not cause harmful interference.
2.		 This device must accept any interference that may be received, including interference that may cause undesired
			 operation.
Changes or modifications not expressly approved by Eagle Window & Door, an Andersen Company, may void the
user’s authority to operate the equipment.
Limitations
VeriLock™ sensors are designed to work with a third party security system. They do not offer guaranteed
protection against burglary, fire or other emergencies. Any security system, whether commercial or residential, is
subject to compromise or failure to warn for a variety of reasons. For example:
•		 Intruders may gain access through unprotected openings or have the technical sophistication to bypass a
			 sensor or disconnect an alarm-warning device.
•		 Battery operated devices will not work without batteries, with dead batteries, or if the batteries are not put in
			 properly.
•		 Signals sent by wireless transmitters may be blocked or reflected by metal before they reach the alarm
			 receiver. Even if the signal path has been recently checked during a weekly test, blockage can occur if a
			 metal object is moved into the path.
The most common cause of a security system failing to detect when an intrusion occurs is inadequate
maintenance. Your alarm system should be tested weekly according to your security system instructions to make
sure all sensors are transmitting properly.
16
User’s Guide
Limited Warranty for Eagle® Windows and Doors with Verilock™ Integrated Security Sensors
Limited Warranty
Eagle warrants VeriLock™ integrated security sensors in its window and door products against defects in
manufacturing, workmanship and materials for a period of two (2) years from the date of manufacture. In the
event the VeriLock integrated security sensor or components of the integrated security sensor fail as a result of a
defect in manufacturing, materials or workmanship within the limited warranty period, Eagle will, at its option,
without charge, replace or repair the VeriLock integrated security sensor or component of the device that fails to
conform to the foregoing warranties. Replacement product will be delivered to the original point of purchase.
Labor for reprogramming or for the installation and any painting, finishing, or similar activities involved in the
installation, removal or disposal of the integrated security technology device or its components is not included.
Exclusions
This limited warranty is the only express warranty (either written or oral) provided by Eagle for VeriLock integrated
security sensors in its window and door products. No dealer, employee, representative or agent of Eagle, nor any
other person, has authority to assume or include on behalf of Eagle any liability, obligation or responsibility in place
of or in addition to the terms of this limited warranty. Any product description (whether in writing or made orally
by Eagle or a third party), specifications, samples, drawings, engineering sheets, user’s manuals, or similar
materials used in connection with the customer’s order are for the sole purpose of identifying Eagle’s product and
shall not be construed as an express warranty or condition. Any suggestions by Eagle or a third party regarding
use, applications or suitability of the product shall not be construed as an express warranty or condition unless
confirmed to be such in writing by Eagle. Eagle does not represent that the integrated security sensors it sells in
its windows and doors may not be circumvented or overcome; that the integrated security sensors will prevent any
personal injury or property loss or damage by burglary, robbery or otherwise, or that the integrated security
sensors will in all cases provide adequate warning or protection. Eagle® products with VeriLock integrated security
sensors are designed to work in conjunction with Honeywell® 5800 Series transmitters installed and monitored by
a reputable security dealer. A properly installed, maintained and configured VeriLock integrated security sensors
used in conjunction with a reputable third party security and monitoring system may only reduce the risk of a
burglary, robbery or similar event by giving warning, but is not insurance or a guarantee that such events will not
occur or will not cause or lead to personal injury or property loss or damage. All warranty claims must be made
during the applicable warranty period.
EAGLE MAKES NO GUARANTEE OR WARRANTY, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE, THAT THE VERILOCK INTEGRATED SECURITY SENSOR IN ITS
WINDOW AND DOOR PRODUCTS WILL PREVENT A BURGLARY, ROBBERY OR OTHER SECURITY BREACH OR
THE CONSEQUENCES OF A BURGLARY, ROBBERY OR OTHER SECURITY BREACH THAT THE INTEGRATED
SECURITY DEVICE WAS DESIGNED TO DETECT AND/OR ALERT.
THE FOREGOING WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING,
BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE. EAGLE EXCLUDES AND SHALL IN NO EVENT BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL
DAMAGES OF ANY NATURE, INCLUDING, WITHOUT LIMITATION, DAMAGES FOR PERSONAL INJURY OR
DAMAGE OR LOSS TO PROPERTY, BASED ON ANY OCCURRENCE OR CLAIM, WHETHER ALLEGED AS
RESULTING FROM BREACH OF WARRANTY, NEGLIGENCE OF EAGLE OR OTHERWISE. THE EXCLUSIVE REMEDY
WITH RESPECT TO ANY AND ALL LOSSES OR DAMAGES RESULTING FROM ANY CAUSE WHATSOEVER,
INCLUDING EAGLE’S NEGLIGENCE, SHALL BE REPAIR, REPLACEMENT OR REFUND OF THE PURCHASE PRICE
OF THE VERILOCK INTEGRATED SECURITY SENSOR OR ITS COMPONENTS AS SPECIFIED ABOVE.
17
User’s Guide
Limited Warranty - continued
Some states do not allow the exclusion or limitation of incidental or consequential damages or limitation of the
duration of an implied warranty, so the above limitations or exclusions may not apply to you. If Eagle is held liable,
whether directly or indirectly for any injury, loss or damage with respect to the VeriLock integrated security sensor
in its window and door products, regardless of cause or origin, its maximum liability shall not in any case exceed
the purchase price of the integrated security technology device, which shall be fixed as liquidated damages and not
as a penalty and shall be the complete and exclusive remedy against Eagle.
This limited warranty is only applicable in the United States (i.e., the fifty states and the District of Columbia). This
limited warranty gives you specific legal rights, and you may also have other rights which may vary from state to
state. If any specific term of this limited warranty is prohibited by any such law, it shall be null and void, but the
remainder of this limited warranty shall remain in full force and effect. Notwithstanding anything to the contrary,
the terms of the limited warranty shall apply unless the parties have jointly executed a separate written agreement
on this topic, in which case the terms of such agreement shall prevail in the event of any conflict with the terms of
the limited warranty.
What is Not Covered by this Limited Warranty
Eagle shall have no obligation under the limited warranty or otherwise for product failure or damage due to:
		 •		 Improper installation, maintenance or use
		 •		 Failure due to the application of non Eagle hardware (e.g. locksets, trim sets, etc.)
		 •		 Failure to properly install Eagle® hardware
		 •		 Installation outside the stated operating parameters
		 •		 Batteries; failures related to batteries of any type used in connection with devices
		 •		 Product alternation or modification, alteration of several numbers
		 •		 Improper service
		 •		 Others (e.g. use of razor blades, use of sealants, painting, sanding or improper washing)
		 •		 Accidents
		 •		 Outside natural occurrences, such as lightning, power surges, fire, floods, wind, wind borne objects, Acts of
				 God, or the like
		 •		 Normal wear and tear
		 •		 Corrosion
		 •		 Condensation
		 •		 Chemicals or air pollutants, such as salt or acid rain
		 •		 Delivery by others
Additional items excluded:
		 •		 Products not manufactured by Eagle Window & Door
		 •		 Labor to replace sensors or other components
		 •		 Labor for reprogramming
		 •		 Labor and costs related to the removal and disposal of defective product
		 •		 Service trips to provide instruction on product use
		 •		 Applicable taxes and freight
18
User’s Guide
Limited Warranty - continued
		 •		 Eagle® windows and doors have their own limited warranties and are not covered by this limited warranty
Returns/Repairs/Reimbursement
Subject to the terms and conditions listed above, during the applicable limited warranty period, Eagle will repair,
replace or reimburse you, at its sole option, free of charge for any defect in VeriLock™ integrated security sensors
or its components. In the event you have a problem with the integrated security sensors in your Eagle window or
door product, please follow the claim procedure outlined below.
Claim Procedure
Each window and door must be inspected upon receipt of delivery and before installation and finishing. To initiate
a claim under this limited warranty, the customer must contact:
		 Warranty Service
		 Eagle Window & Door, LLC
		 2045 Kerper Blvd.
		 Dubuque, Iowa 52001
		 1-800-324-5354
Eagle must receive each claim within the applicable limited warranty period and also within thirty (30) days after
the date the defect is first discovered or reasonably could have been discovered. The claim must contain the
following information:
		 1. The customer’s name, address and telephone number.
		 2. A description of the product.
		 3. Proof of the date of purchase (an invoice will suffice).
		 4. The name of the dealer from which the product was purchased (if known).
		 5. A description of the defect and any further pertinent information.
Eagle will reply within a reasonable period of time after receipt of the claim. For a claim to be honored, the
customer must cooperate with Eagle by providing any other information and evidence reasonably required to
resolve the claim, and if requested, the customer must permit Eagle to inspect the product within a reasonable
period of time after the claim is made. This limited warranty will be void if the product is removed or modified
without first providing Eagle with notice and the opportunity to inspect the product as installed. If, after
investigation, Eagle determines that the claim is valid, the remedy will be in accordance with the terms and
conditions of this limited warranty.
Eagle reserves the right to perform all limited warranty work or arrange for another party to perform the limited
warranty work at the consumer’s cost.
The applicable limited warranty period will be extended by the period of performance of any limited warranty work,
but thereafter the remaining original limited warranty period will continue in effect and be applicable to the limited
warranty work performed under the terms and conditions of this limited warranty. Eagle reserves the right, at its
discretion, to discontinue or modify part or all of any of its products or components. If an identical Eagle® product
19
User’s Guide
Limited Warranty - continued
or component is not available for replacement purposes, Eagle reserves the right, at its discretion, to substitute a
similar Eagle window or door product or component of equivalent value or to refund the original purchase price of
the defective product or component.
Non-Warranty Repair/Replacement
Customer will be charged for repairs or replacement of out of warranty product. For all non-warranty repairs or
replacement product, customer will be billed for all parts, labor and shipping costs.
Transfer of Warranty
This limited warranty and all claims and rights hereunder shall transfer to any new property owner upon sale or
legal transfer of ownership of the property within which the warranty product has been installed.
Please carefully read the VeriLock™ Integrated Security Sensors User’s Guide which contains important
information about properly operating and maintaining integrated security sensors in your Eagle window and door
products.
“Eagle” and all other marks where denoted are trademarks of Eagle Window & Door Manufacturing, Inc. , its parent company.
©2010 Eagle Window & Door Manufacturing, Inc. All rights reserved. Printed and effective as of September 2009.
20
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
XMP Toolkit                     : 3.1-702
Create Date                     : 2010:10:27 14:14:02-05:00
Modify Date                     : 2011:01:21 13:03:32-06:00
Metadata Date                   : 2011:01:21 13:03:32-06:00
Creator Tool                    : Adobe InDesign CS3 (5.0.4)
Thumbnail Format                : JPEG
Thumbnail Width                 : 256
Thumbnail Height                : 256
Thumbnail Image                 : (Binary data 13527 bytes, use -b option to extract)
Version ID                      : 1
Instance ID                     : uuid:40bcc7fc-6970-422d-b92a-aee807985de1
Document ID                     : adobe:docid:indd:c309952b-9f71-11de-9732-af92929a0b88
Rendition Class                 : proof:pdf
Derived From Instance ID        : 2f2b23a9-953e-11de-bf1a-ebdfb0c24a57
Derived From Document ID        : adobe:docid:indd:b84ae317-7e90-11de-9294-93973fae20be
Derived From Version ID         : 1
Manifest Link Form              : ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream
Manifest Placed X Resolution    : 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00
Manifest Placed Y Resolution    : 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00
Manifest Placed Resolution Unit : Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches
Manifest Reference Instance ID  : uuid:C2C291F44343DF118FEEF5821748F077, uuid:0C6EAD016B7FDE11AB15859A4501CD32, uuid:38214884707FDE11AB15859A4501CD32, uuid:FF7ABB6634A0DE11ADC98DFDDB09A757, uuid:007BBB6634A0DE11ADC98DFDDB09A757, uuid:4E9029BE667FDE11AB15859A4501CD32, uuid:509029BE667FDE11AB15859A4501CD32, uuid:0A6EAD016B7FDE11AB15859A4501CD32, uuid:0B6EAD016B7FDE11AB15859A4501CD32, uuid:017BBB6634A0DE11ADC98DFDDB09A757, uuid:0A61DAFD1842DF118883D97E68AB9EFC, uuid:F7BF07789EA2DE11B32B9C582557D1AB, uuid:804AD3F50DA8DE1191EEFF8B7F9C20A2, uuid:F6BF07789EA2DE11B32B9C582557D1AB, uuid:5E653EE97A7EDE11A3A5D91C51F27F49, uuid:5F653EE97A7EDE11A3A5D91C51F27F49, uuid:4F8A551E3FA0DE1196E2B53FBE39D9FE, uuid:568A551E3FA0DE1196E2B53FBE39D9FE, uuid:E0ED4CCE9F8CDE1194D6D63EA83DA6CC, uuid:529EB3B6AE8FDE1198B0B5E4DDE43508, uuid:027BBB6634A0DE11ADC98DFDDB09A757, uuid:864AD3F50DA8DE1191EEFF8B7F9C20A2, uuid:EE73A0AF59A0DE11ADC98DFDDB09A757, uuid:874AD3F50DA8DE1191EEFF8B7F9C20A2, uuid:047BBB6634A0DE11ADC98DFDDB09A757, uuid:7D24CDF697ADDE11A64BBF000576CCAF, uuid:7524CDF697ADDE11A64BBF000576CCAF, uuid:7624CDF697ADDE11A64BBF000576CCAF, uuid:EE73A0AF59A0DE11ADC98DFDDB09A757, uuid:56044CD16F8DDE119BF7F0A413071390, uuid:52044CD16F8DDE119BF7F0A413071390, uuid:0961DAFD1842DF118883D97E68AB9EFC, uuid:9597E097013FDF1195E7C734EDC76A06, uuid:9697E097013FDF1195E7C734EDC76A06, uuid:0961DAFD1842DF118883D97E68AB9EFC, uuid:108706121B43DF118FEEF5821748F077, uuid:D043FE132E43DF118FEEF5821748F077, uuid:D143FE132E43DF118FEEF5821748F077, uuid:0E8706121B43DF118FEEF5821748F077, uuid:6AC22ED8DD8FDE1198B0B5E4DDE43508, uuid:F173A0AF59A0DE11ADC98DFDDB09A757, uuid:6EC22ED8DD8FDE1198B0B5E4DDE43508, uuid:F273A0AF59A0DE11ADC98DFDDB09A757, uuid:F9BF07789EA2DE11B32B9C582557D1AB, uuid:FABF07789EA2DE11B32B9C582557D1AB, uuid:9749CB58163411DE886DB5D336ED147F
Manifest Reference Document ID  : uuid:AAE27A41002A11DF94FEAF491C836DF4, uuid:813773ED617FDE11AB15859A4501CD32, uuid:853773ED617FDE11AB15859A4501CD32, uuid:833773ED617FDE11AB15859A4501CD32, uuid:7F3773ED617FDE11AB15859A4501CD32, uuid:873773ED617FDE11AB15859A4501CD32, uuid:4F9029BE667FDE11AB15859A4501CD32, uuid:539029BE667FDE11AB15859A4501CD32, uuid:559029BE667FDE11AB15859A4501CD32, uuid:E3ED4CCE9F8CDE1194D6D63EA83DA6CC, uuid:E5ED4CCE9F8CDE1194D6D63EA83DA6CC, uuid:FF2295ED8C94DE11B398BFC7B9263187, uuid:012395ED8C94DE11B398BFC7B9263187, uuid:042395ED8C94DE11B398BFC7B9263187, uuid:5A653EE97A7EDE11A3A5D91C51F27F49, uuid:5C653EE97A7EDE11A3A5D91C51F27F49, adobe:docid:photoshop:954b5c5d-d378-11d9-a055-949ffc6012eb, adobe:docid:photoshop:75ad80a2-d380-11d9-a055-949ffc6012eb, uuid:C01DBFF3988CDE1194D6D63EA83DA6CC, uuid:BE1DBFF3988CDE1194D6D63EA83DA6CC, uuid:4D044CD16F8DDE119BF7F0A413071390, uuid:844AD3F50DA8DE1191EEFF8B7F9C20A2, uuid:076EAD016B7FDE11AB15859A4501CD32, uuid:814AD3F50DA8DE1191EEFF8B7F9C20A2, uuid:037BBB6634A0DE11ADC98DFDDB09A757, uuid:7C24CDF697ADDE11A64BBF000576CCAF, uuid:B71DBFF3988CDE1194D6D63EA83DA6CC, uuid:BA1DBFF3988CDE1194D6D63EA83DA6CC, uuid:076EAD016B7FDE11AB15859A4501CD32, uuid:4F044CD16F8DDE119BF7F0A413071390, uuid:51044CD16F8DDE119BF7F0A413071390, uuid:E3F27344AC8CDE1194D6D63EA83DA6CC, uuid:9397E097013FDF1195E7C734EDC76A06, uuid:E0F27344AC8CDE1194D6D63EA83DA6CC, uuid:E3F27344AC8CDE1194D6D63EA83DA6CC, uuid:4D9EB3B6AE8FDE1198B0B5E4DDE43508, uuid:098706121B43DF118FEEF5821748F077, uuid:0B61DAFD1842DF118883D97E68AB9EFC, uuid:539EB3B6AE8FDE1198B0B5E4DDE43508, uuid:569EB3B6AE8FDE1198B0B5E4DDE43508, uuid:67C22ED8DD8FDE1198B0B5E4DDE43508, uuid:6DC22ED8DD8FDE1198B0B5E4DDE43508, uuid:6FC22ED8DD8FDE1198B0B5E4DDE43508, uuid:A7CF1E193792DE11B37B9A796D6236C4, uuid:A5CF1E193792DE11B37B9A796D6236C4, uuid:9749CB57163411DE886DB5D336ED147F
Format                          : application/pdf
Producer                        : Adobe PDF Library 8.0
Trapped                         : False
Page Count                      : 20
Creator                         : Adobe InDesign CS3 (5.0.4)
EXIF Metadata provided by EXIF.tools
FCC ID Filing: WVJ-CB00010522402

Navigation menu