Andersen CB00011072401 Intrusion Detector-400-DH Sensor User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2992395
Application ID	cX9FpAaTVltV2y+nLR4baA==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	394.1kB (4926283 bits)
Date Submitted	2016-05-16 00:00:00
Date Available	2016-05-16 00:00:00
Creation Date	2016-02-26 09:07:17
Producing Software	Adobe PDF Library 11.0
Document Lastmod	2016-02-26 09:08:09
Document Title	Users Manual
Document Creator	Adobe InDesign CC 2014 (Macintosh)

VeriLock® Security Sensor Application
VeriLock® Security Sensor Application
for Andersen® A-Series Frenchwood Hinged Inswing & Outswing, 400 Series Frenchwood® Hinged Inswing &
Outswing and Hinged Inswing & Outswing Entry Doors
for Andersen® A-Series Frenchwood Hinged Inswing & Outswing, 400 Series Frenchwood® Hinged Inswing &
Outswing and Hinged Inswing & Outswing Entry Doors
Thank you for choosing Andersen. / Gracias por elegir Andersen.
For questions call 1-888-888-7020. For more information and/or guides visit andersenwindows.com.
Please leave this guide with building owner.
Si tiene alguna pregunta llame al 1-888-888-7020. Para obtener más información y/o guías, visite andersenwindows.com.
Deje esta guía con el dueño de la construcción.
▶▶ Read guide from beginning to end before starting installation. Read all warnings and cautions during unit installation.
Lea completamente la guía antes de comenzar la instalación. Lea y respete todas las advertencias y precauciones durante la instalación de la unidad.
▶▶ Check with your local building code official to identify and confirm compliance with local building code requirements.
Consulte los códigos locales de construcción para identificar y confirmar que se cumplan los requisitos del código de construcción.
Parts Included / Partes Incluidas
(1)
(4)
(1)
(1)
(2)
(1)
(1)
(2)
(2)
(2)
(1)
(4)
Instruction Guide / Instruction Guide
VeriLock Face Plate / VeriLock Face Plate
VeriLock Sensor / VeriLock Sensor
Actuator / Actuator
CR-2032 Battery / CR-2032 Battery
Cylinder Magnet / Cylinder Magnet
Block Magnet / Block Magnet
Cylinder Magnet Cap/ Cylinder Magnet Cap
Block Magnet Cap/ Block Magnet Cap
Screw Standoff / Screw Standoff
4-1/4" Spindle / 4-1/4" Spindle
#8 x 1-3/4" Bolt (2 white, 2 stone) 		
(Tribeca® Hardware Only) /
#8 x 1-3/4" Bolt (2 white, 2 stone) 		
(Tribeca® Hardware Only)
Additional Parts Required for
Entry Doors Only (Ordered Seperately)
Additional Parts Required for
Entry Doors Only (Ordered Seperately)
(1) Extended Lock Actuator /
		Extended Accionador del cerrojo
Tools Needed / Herramientas Necesarias
∙∙ Safety Glasses / Lentes de seguridad
∙∙ Phillips Screwdriver / Destornillador Phillips
∙∙ 1/8" Hex Key / Hex Key de 1/8"
∙∙ Drill/Driver / Taladro/destornillador
∙∙ 5/16" Drill Bit / Broca para taladro de 5/16"
∙∙ Tape Measure / Tape Measure
∙∙ Drop Cloth / Drop Cloth
VeriLock®
Face Plate
VeriLock®
Face Plate
Cylinder
Magnet
Cylinder
Magnet
Actuator
Actuator
VeriLock®
Sensor
VeriLock®
Sensor
Cylinder
Magnet Cap
Cylinder
Magnet Cap
CR-2032
Battery
CR-2032
Battery
#8 x 1-3/4" Bolt
(Tribeca Hardware Only)
#8 x 1-3/4" Bolt
Screw Standoff
Screw Standoff
(Tribeca Hardware Only)
Block
Magnet
Block
Magnet
Block
Magnet Cap
Block
Magnet Cap
4-1/4"
Spindle
4-1/4"
Spindle
Depending on individual installation requirements, some parts may not be used.
Depending on individual installation requirements, some parts may not be used.
“Andersen” and all other marks where denoted are trademarks of Andersen Corporation and its subsidiary. © 2016 Andersen Corporation. All rights reserved.
“Andersen” y todas las demás marcas que aparezcan son marcas registradas de Andersen Corporation y su subsidiaria © 2016 Andersen Corporation. Todos los derechos reservados.
9 1 3 9 8 3 1 BA - 0 1
Revised 02/21/16
Use caution when working at elevated heights and around unit openings.
Follow manufacturers’ instructions for ladders and/or scaffolding. Failure
to do so may result in injury or death.
Sea cauteloso al trabajar en lugares elevados y cerca de las aberturas de
la unidad. Siga las instrucciones del fabricante para el uso de escaleras
y/o andamios. Si no lo hiciera, podrían producirse lesiones o la muerte.
Follow manufacturers’ instructions for hand or power tools. Always
wear safety glasses. Failure to do so may result in injury and/or
product damage.
Siga las instrucciones del fabricante para el uso de herramientas
eléctricas o manuales. Utilice siempre gafas de seguridad. Si no lo
hiciera, podrían producirse lesiones y/o daños al producto.
Batteries carry the risk of fire, explosion and burns. Do not recharge,
disassemble, heat above 212 degrees F (100 degrees C) or
incinerate. Dispose of used batteries promptly and properly. Keep
away from children.
Les piles représentent un risque d’incendie, d’explosion et de
brûlures. Ne pas recharger, démonter, chauffer à une température
excédant 100 degrés C (212 degrés F) ou incinérer. Éliminer les piles
rapidement et de manière appropriée. Garder à l’écart des enfants.
Magnetic field can be harmful to implanted medical device wearers.
Keep magnets away from devices.
Magnetic field can be harmful to implanted medical device wearers.
Keep magnets away from devices.
Batteries are small parts and, if swallowed, could pose a choking
hazard to young children.
Magnets are small parts and, if swallowed, could pose a choking
hazard to young children.
Los imanes son partes pequeñas que, en caso de ingesta, pueden
representar un riesgo de asfixia para niños pequeños.
Las baterías son partes pequeñas que, en caso de ingesta, pueden
representar un riesgo de asfixia para niños pequeños.
9139831
1
Exterior Handle
Manija exterior
Interior
Interior
Set Screw
Tornillo de fijación
1/8" Hex Key
Hex Key de 1/8"
Interior Active
Escutcheon
Escudete con
apertura interior
Bushing
Casquillo
Escutcheon
Bolt
Perno de
escudete
Interior Handle
Manija interior
Bushing
Casquillo
Spindle
Husillo
Lay a drop cloth down to prevent losing parts. Unlock and open active door panel. Loosen set
screw on exterior handle using 1/8" hex key. Remove handles and set aside for reuse.
Lay a drop cloth down to prevent losing parts. Unlock and open active door panel. Loosen set
screw on exterior handle using 1/8" hex key. Remove handles and set aside for reuse.
Remove escutcheon bolts and interior active
escutcheon. Set aside for reuse.
Remove escutcheon bolts and interior active
escutcheon. Set aside for reuse.
Support exterior components when loosening cylinder mounting bolts.
Support exterior components when loosening cylinder mounting bolts.
Interior
Entry Doors Only /Entry Doors Only
Dummy Cylinder
Falso cilindro
Lock Actuator
Lock Actuator
Cylinder
Mounting Bolts
(do not fully remove)
Pernos de montaje
del cilindro
(do not fully remove)
Limiting Plate
Placa limitadora
Cylinder Mounting Bolts
Pernos de montaje del cilindro
Exterior Active
Escutcheon
Escudete
con apertura
exterior
Gasket
Junta
Lock Mechanism
Mecanismo del
cerrojo
Extended
Lock Actuator
Extended
Lock Actuator
Existing
Lock Actuator
Existing
Lock Actuator
Loosen cylinder mounting bolts until exterior components can
be removed. Set exterior components aside for reuse.
Loosen cylinder mounting bolts until exterior components can
be removed. Set exterior components aside for reuse.
For Entry Doors only, remove cylinder mounting bolts, limiting plate and
lock actuator. Replace existing lock actuator with extended lock actuator.
Reapply parts as shown, do not fully tighten bolts.
For Entry Doors only, remove cylinder mounting bolts, limiting plate and
lock actuator. Replace existing lock actuator with extended lock actuator
and reapply parts as shown, do not fully tighten bolts.
9139831
4
Interior
Tribeca® Hardware Only
Tribeca® Hardware Only
Mounting Stud
Mounting Stud
Removable
Mounting Stud
Removable
Mounting Stud
Screw Standoff
Screw Standoff
Exterior Active
Escutcheon
Escudete
con apertura
exterior
Verify gasket is
seated properly.
Verify gasket is
seated properly.
Screw Standoff
Screw Standoff
Exterior Active
Escutcheon
Escudete
con apertura
exterior
Verify gasket is
seated properly.
Verify gasket is
seated properly.
Mounting Stud
Mounting Stud
Screw Standoff
Screw Standoff
Removable
Mounting Stud
Removable
Mounting Stud
Apply screw standoffs to mounting studs on back side of exterior
escutcheon as shown.
Apply screw standoffs to mounting studs on back side of exterior
escutcheon as shown.
For Tribeca hardware only, apply removable mounting studs as shown,
then apply screw standoffs to mounting studs on back side of exterior
escutcheon as shown.
For Tribeca hardware only, apply removable mounting studs as shown,
then apply screw standoffs to mounting studs on back side of exterior
escutcheon as shown.
Interior
Interior
Dummy Cylinder
Falso cilindro
VeriLock® Assembly
VeriLock® Assembly
VeriLock
Face Plate
VeriLock
Face Plate
Cylinder
Mounting
Bolts
Pernos de
montaje del
cilindro
Exterior Active
Escutcheon
Escudete
con apertura
exterior
Re-apply exterior components and tighten cylinder
mounting bolts.
Re-apply exterior components and tighten cylinder
mounting bolts.
9139831
Screw Standoff
Screw Standoff
Indicator
Light
Indicator
Light
VeriLock Sensor
VeriLock Sensor
CR-2032
Batteries
CR-2032
Batteries
(back views)
(back views)
(front view)
(front view)
Select preferred color VeriLock face plate. Press sensor into back side of face plate and
install batteries with (+) facing out as shown. Indicator light will illuminate for one (1)
second when batteries are installed correctly.
Select preferred color VeriLock face plate. Press sensor into back side of face plate and
install batteries with (+) facing out as shown. Indicator light will illuminate for one second
when batteries are installed correctly.
7
Interior
VeriLock assembly can be rotated for use on either
left handed (LH) or right handed (RH) panels.
VeriLock assembly can be rotated for use on either
left handed (LH) or right handed (RH) panels.
Alignment Tabs
(will fit in only
one orientation)
Alignment Tabs
(will fit in only
one orientation)
Top Hole
Top Hole
VeriLock® Assembly
(back view)
VeriLock® Assmbly
(back view)
Actuator
(in top
hole only)
Actuator
(in top
hole only)
Tab
Tab
VeriLock® Assembly
(tab must point toward
latch side of panel)
VeriLock® Assmbly
(tab must point toward
latch side of panel)
(Verify arrows
align on the tab
side as shown)
(Verify arrows are
aligned as shown
on the tab side)
Latch
Latch
Tab side as
viewed from
back.
Tab side as
viewed from
back.
Rotate VeriLock assembly to the correct orientation (tab side must point toward the latch side of panel). Insert actuator into top hole of VeriLock
assembly from back side as shown.
Rotate VeriLock assembly to the correct orientation. (tab side must point toward the latch side of panel).
Interior
Sensor contains an anti-tamper switch.
Do not apply sensor over wet finish or
rough/dirty surface. Improper switch
function may result.
Sensor contains an anti-tamper switch.
Do not apply sensor over wet finish or
rough/dirty surface. Improper switch
function may result.
Lock Actuator
Accionador del
cerrojo
VeriLock Assembly
VeriLock Assembly
Actuator
Accionador
VeriLock Sensor
(anti-tamper switch)
VeriLock Sensor
(anti-tamper switch)
Indicator Light
Indicator Light
Verify panel surface is clean and dry. Position VeriLock assembly on the panel over the lock actuator as shown. The indicator will illuminate for one (1)
second when the sensor is applied to the panel as the anti-tamper switch is depressed.
Verify panel surface is clean and dry. Position assembly on the panel over the lock actuator as shown. The indicator will illuminate for one (1) second
when the sensor is applied to the panel as the anti-tamper switch is depressed.
9139831
9
Interior
Tribeca® Hardware Only
Tribeca® Hardware Only
Interior Active
Escutcheon
Escudete con
apertura interior
#8 x 1-3/4" Bolt
#8 x 1-3/4" Bolt
Replace existing bolts
with #8 x 1-3/4" bolts.
Replace existing bolts
with #8 x 1-3/4" bolts.
Escutcheon
Bolt
Perno de
escudete
Position interior escutcheon on panel as shown and fasten bolts (do not fully tighten until handles have been installed).
Position interior escutcheon on panel as shown and fasten bolts (do not fully tighten until handles have been installed).
10
4-1/4" Spindle
4-1/4" Spindle
Set Screw
Tornillo de fijación
Hex Key
Hex Key
Interior
Spindle (V-Slot)
Husillo (ranura en
forma de V)
Spindle
Husillo
Line up v-slot
with set screw
Alinee la ranura
en forma de V
con el tornillo de
fijación
Existing Spindle
Existing Spindle
Bottom View/
Vista inferior
Loosen set screw on handle and remove spindle. Replace existing spindle with 4-1/4"spindle and tighten set screw. Set screw must enter v-slot in
spindle when securing the handle.
Loosen set screw on handle and remove spindle. Replace existing spindle with extended spindle and tighten set screw. Set screw must enter v-slot in
spindle when securing the handle.
11
Exterior Handle
Manija exterior
Interior
Handles must point
toward the glass with set
screw on the bottom.
Las manijas deben
apuntar hacia el vidrio
con el tornillo de fijación
en la parte inferior.
Set Screw
Tornillo de
fijación
Hex Key
Hex Key
Bushing
Casquillo
Interior Handle
Manija interior
Bushing
Casquillo
Spindle
Husillo
Slide handles and bushings together tightly. Insert set screw in exterior handle and tighten using hex key. Finish tightening escutcheon bolts.
Slide handles and bushings together tightly. Insert set screw in exterior handle and tighten using hex key. Finish tightening escutcheon bolts.
9139831
Magnet Application/ Magnet Application
Magnets are small parts and, if swallowed, could pose a choking hazard to young children.
Los imanes son partes pequeñas que, en caso de ingesta, pueden representar un riesgo de asfixia para niños pequeños.
12
Selection of the correct door configuration is critial for magnet application. Wrong configuration selection will result in
improper magent application and product damage.
Selection of the correct door configuration is critial for magnet application. Wrong configuration selection will result in
improper magent application and product damage.
As viewed from
the exterior.
As viewed from
the exterior.
▶▶ For DOUBLE operating, OUTSWING doors, go to Step 12a.
For DOUBLE operating, OUTSWING doors, go to Step 12a.
Or
Or
▶▶ For DOUBLE operating, INSWING doors, go to Step 12b.
For DOUBLE operating, INSWING doors, go to Step 12b.
As viewed from
the exterior.
As viewed from
the exterior.
Or
Or
▶▶ For SINGLE operating, OUTSWING doors, go to Step 12c.
For SINGLE operating, OUTSWING doors, go to Step 12c.
As viewed from
the exterior.
As viewed from
the exterior.
Or
Or
Stationary Panels
Stationary Panels
Stationary Panel
Stationary Panel
▶▶ For SINGLE operating, INSWING doors,
go to Step 12d.
For SINGLE operating, INSWING doors,
go to Step 12d.
As viewed from
the exterior.
As viewed from
the exterior.
Determine door your configuration and proceed to appropriate section for magnet installation.
Determine door your configuration and proceed to appropriate section for magnet installation.
9139831
Viewed from the exterior.
For DOUBLE Operating, OUTSWING Doors Only
For DOUBLE Operating, OUTSWING Doors Only
12a
As viewed from
the exterior.
As viewed from
the exterior.
Cylinder
Magnet Cap
Cylinder
Magnet Cap
Cylinder Magnet
Cylinder Magnet
Press cylinder magnet firmly into
preferred color cylinder magnet cap.
Press cylinder magnet firmly into
preferred color cylinder magnet cap.
nged
right)
FWO
Passive Panel
Active Panel
Passive Panel
Passive Panel
(operating panel with
(operating panel
attached astragal)
used
most
often)
Active Panel
Close doors and lightly mark
6068magnet
A locationPacross from
L R
bottom arrow on VeriLock face
plate, as shown.
Close doors and lightly mark
magnet
location across Left
from
Active
Panel
bottomused
arrow on VeriLock face
(panel
Hinged
plate,often)
as shown.
most
Frenchwood®
Hinged Outswing
Patio Door
Door Rough
Opening
Active Panel
Interior View
Interior View
Passive
Panel
Astragal
Astragal
Open active panel and drill 5/16"
hole at marked location in center
of astragal side, as shown.
Open active door and drill 5/16"
hole at marked location in center
of side surface, as shown.
Astragal
Astragal
5/16" Drill Bit
5/16" Drill Bit
Center of
astragal side.
Center of
astragal side.
Interior View
Interior View
Insert cylinder magnet with
cap into drilled hole.
Insert cylinder magnet with
cap into drilled hole.
Install magnet on your DOUBLE operating, OUTSWING, door as shown.
Install magnet on your DOUBLE operating, OUTSWING, door as shown.
9139831
Right
Hinged
For DOUBLE Operating, INSWING Doors Only
For DOUBLE Operating, INSWING Doors Only
12b
As viewed from
the exterior.
As viewed from
the exterior.
FWH
6068 A
FWH
9068 S
Remove adhesive liner from one side of
block magnet and press firmly into
®
cap.
Frenchwood
Left preferred color block magnet
adhesive liner from one side of
Hinged
HingedRemove
block magnet and press firmly
into Inswing
preferred color block magnet
cap. Door
Patio
Block Magnet Cap
Block Magnet
Cap
®
Frenchwood
Active Panel
(panel used
Hinged Inswing
most often)
Patio Door
Passive
Door Rough
Right
Panel
Opening
Hinged
Block Magnet
Stationary
Panel
Door Rough
Opening
Stationary
Panel
Active
Panel
Right
Hinged
Block Magnet
Bottom Arrow
Bottom Arrow
Edge of Passive Panel
Edge of Passive Panel
Remove second adhesive liner
from block magnet with cap.
Remove second adhesive liner
from block magnet with cap.
Passive Panel
Passive Panel
Active Panel
Active Panel
Position block magnet with cap to front
surface of passive panel, flush to edge, and
centered across from bottom arrow on
VeriLock face plate.
Position block magnet with cap to front
surface of passive panel, flush to edge, and
centered across from bottom arrow on
VeriLock face plate.
Interior View
Interior View
Order Designation Description
Viewed from the exterior.
Install magnet on your DOUBLE operating, INSWING, door as shown.
Install magnet on your DOUBLE operating, INSWING, door as shown.
9139831
Viewed from the exterior.
For SINGLE Operating, OUTSWING Doors Only
For SINGLE Operating, OUTSWING Doors Only
12c
As viewed from
the exterior.
As viewed from
the exterior.
Cylinder
Magnet Cap
Cylinder
Magnet Cap
Cylinder Magnet
Cylinder Magnet
Press cylinder magnet firmly
into preferred color cylinder
magnet cap.
Press cylinder magnet firmly
into preferred color cylinder
magnet cap.
ary
g panel)
Left Hinged
(hinges on left)
BottomHinged
Arrow
Right
Bottomon
Arrow
(hinges
right)
Panel Stop
Panel Stop
Active Panel
(operating panel
used most often)
Interior View
Interior View
Interior View
Interior View
Passive
Lightly markPanel
magnet location on panel
stop across
fromwith
bottom arrow on
(operating
panel
VeriLock face
plate, as shown.
attached
astragal)
Lightly mark magnet location on panel
stop across from bottom arrow on
VeriLock face plate, as shown.
Open door and drill 5/16"
hole, 1" deep, 1/4" from panel
stop edge.
Open door and drill 5/16"
hole, 1" deep, 1/4" from panel
stop edge.
1/4"
5/16" Drill Bit
5/16" Drill Bit
Insert cylinder magnet with
cap into drilled hole.
Insert cylinder magnet with
cap into drilled hole.
Install magnet on your SINGLE operating, OUTSWING, door as shown.
Install magnet on your SINGLE operating, OUTSWING, door as shown.
9139831
10
FWO
Frenchw
Hinged
Patio D
Order Designation Description
12d
Viewed from the exterior. For SINGLE Operating, INSWING Doors Only
For SINGLE Operating, INSWING Doors Only
As viewed from
the exterior.
As viewed from
the exterior.
SMagnetA FWH
6068Cylinder
A FWH
P L 6068
RCylinder
Magnet Cap
Cylinder Magnet
Cylinder
MagnetFrenchwood
Cap
®
FWH S 6068
9068
A SA
Press cylinder magnet firmly
® Frenchwood®
Left
Panel
Right
Stationary
ood
Frenchwood
Left
Stationary Active
Stationary
Active Panel
into
preferred color
cylinder
(panel used
Hinged
Hinged Inswing
Hinged
Panel
cap.
nswing
Hinged
InswingHinged Inswing
Hinged magnet
Panel
Panel
most often)
Patio Door
or
Patiofirmly
Door Patio Door
Press cylinderActive
magnet
Rough
Rough Stationary
Passive DoorRight
Door Rough
Door Rough Door
Active
Right
into preferred color cylinder
Opening
Panel
Opening
Panel
Panel
Opening
Hinged
Opening
Panel
Hinged
magnet cap.
®
Strike Plate
Strike Plate
Interior View
Interior View
Jamb
Jamb
6068 A
between the strike plate and
jamb edge).
Open door and mark magnet
location on jamb (even with
bottom strike plate screw
and centered in the area
between the strike plate and
jamb edge).
Drill 5/16" hole, 1" deep, at
marked location.
Drill 5/16" hole, 1" deep, at
marked location.
5/16" Drill Bit
5/16" Drill Bit
Order Designation Description
Viewedfrom
fromthe
theexterior.
exterior.
Viewed
Insert cylinder magnet with
cap into drilled hole.
Insert cylinder magnet with
cap into drilled hole.
ve Panel
ng panel with
ed astragal)
Stationary6068 ALeft Hinged
FWO
P L
(hinges on left)
(non-operating panel)
Hinged
R Right
(hinges on right)
Frenchwood®
Left
Active Panel
(panel used
Hinged Outswing
Hinged
most often)
Patio Door
Door
Rough
Right
Install magnet on your SINGLE operating, INSWING, door asPassive
shown.
Opening door as Panel
Hinged
Install magnet on your SINGLE operating, INSWING,
shown.
9139831
11
Frenchwood®
Active Panel
(panel used
Hinged Inswing
Open door and mark magnet most often)
Patio
Door
location on jamb (even
withRough
Passiv
Door
bottom strike plate screw
Pane
Opening
and centered in the area
Edge of jamb.
Edge of jamb.
FWH Frenchwood Hinged Patio Doors - Outswing
Interior View
Interior View
FWH
RS R
Active Panel
(operating panel
used most often)
Passive Panel
(operating panel with
attached astragal)
Verify VeriLock Sensor Function / Verify VeriLock Sensor Function
13
Thumb Turn Latch
Thumb Turn Latch
Interior
Indicator Light
Indicator Light
Unlocked
Unlocked
Locked
Locked
1. Close door without locking. Indicator light will illuminate for one (1) second.
2. Engage all upper, middle and lower hooks and lock door with dead bolt. Indicator light will illuminate for one (1) second.
Verify door is locked.
3. Unlock door with dead bolt. Indicator light will illuminate for one (1) second.
4. Open door. Indicator light will illuminate for one (1) second.
1. Close door without locking. Indicator light will illuminate for one (1) second.
2. Engage all upper, middle and lower hooks and lock door with dead bolt. Indicator light will illuminate for one (1) second.
Verify door is locked.
3. Unlock door with dead bolt. Indicator light will illuminate for one (1) second.
4. Open door. Indicator light will illuminate for one (1) second.
Verify VeriLock® sensor function. If indicator light does not respond as described, verify sensor application and magnet placement.
Verify VeriLock® sensor function. If indicator light does not respond as described, verify sensor application and magnet placement.
▶▶ Procedure is complete.
Procedure is complete.
Refer to monitoring system of your choice for sensor enrollment. /
Refer to monitoring system of your choice for sensor enrollment.
For maintenance information, please visit http://www.andersenwindows.com/verilock and consult with the VeriLock user guide.
For maintenance information, please visit http://www.andersenwindows.com/verilock and consult with the VeriLock user guide.
9139831
12
Regulatory Statements / Regulatory Statements
Federal Communications Commission (FCC)
Part 15 Statement
Federal Communications Commission (FCC)
Part 15 Statement
This device complies with FCC Rules Part 15. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference. (2) This device must accept any
interference that may be received, including interference that
may cause undesired operation.
This device complies with FCC Rules Part 15. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference. (2) This device must accept any
interference that may be received, including interference that
may cause undesired operation.
Industry Canada (IC) RSS Statement
Industry Canada (IC) RSS Statement
Le présent appareil est conforme aux CNR d'Industrie Canada
applicables aux appareils radio exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes: (1)
I'appareil ne doit pas produire de brouillage; (2) I'utilisateur de
I'appareil doit accepter tout brouillage radioélectrique subi,
méme si le brouillage est susceptible d'en compromettre le
fonctionnement.
Le présent appareil est conforme aux CNR d'Industrie Canada
applicables aux appareils radio exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes: (1)
I'appareil ne doit pas produire de brouillage; (2) I'utilisateur de
I'appareil doit accepter tout brouillage radioélectrique subi,
méme si le brouillage est susceptible d'en compromettre le
fonctionnement.
Changes or modifications not expressly approved by Andersen
may void the user's authority to operate the equipment.
Changes or modifications not expressly approved by Andersen
may void the user's authority to operate the equipment.
This device complies with Industry Canada license-exempt RSS
standard(s). Operation is subject to the following two conditions:
(1) This device may not cause interference, and (2) This device
must accept any interference, including interference that may
cause undesired operation of the device.
9139831
This device complies with Industry Canada license-exempt RSS
standard(s). Operation is subject to the following two conditions:
(1) This device may not cause interference, and (2) This device
must accept any interference, including interference that may
cause undesired operation of the device.
13

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Instance ID                     : uuid:79387716-b0ea-ec46-84c0-7d5334bcfb8d
Original Document ID            : adobe:docid:indd:d0717119-dfee-11de-8e34-9beae8c19d6b
Document ID                     : xmp.id:e7818682-3022-4bb7-b46e-ce8639cec9d6
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:4c7e2ccb-5757-4c75-bdb7-6ad800372b59
Derived From Document ID        : xmp.did:d9899c16-313d-4c8f-80dc-8248163896c5
Derived From Original Document ID: adobe:docid:indd:d0717119-dfee-11de-8e34-9beae8c19d6b
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CC 2014 (Macintosh)
History Changed                 : /
History When                    : 2016:02:26 09:07:17-06:00
Create Date                     : 2016:02:26 09:07:17-06:00
Modify Date                     : 2016:02:26 09:08:09-06:00
Metadata Date                   : 2016:02:26 09:08:09-06:00
Creator Tool                    : Adobe InDesign CC 2014 (Macintosh)
Format                          : application/pdf
Producer                        : Adobe PDF Library 11.0
Trapped                         : False
Slug Family                     : Helvetica
Slug Version                    : 001.004
Slug Outline File Size          : 30185
Slug Kerning Checksum           : 55007
Slug Foundry                    : Adobe Systems
Slug Font Kind                  : PostScript
Slug Checksum                   : 3285313313
Slug Post Script Name           : Helvetica-Condensed
Slug Font Sense 12 Checksum     : 3285313313
Page Layout                     : SinglePage
Page Mode                       : UseThumbs
Page Count                      : 13
Creator                         : Adobe InDesign CC 2014 (Macintosh)

EXIF Metadata provided by EXIF.tools