Andrew Base Station Subsystems Group 100595HPRM HPRM850 Amplifier RF100595/NTN065JA User Manual v2 HPRM850 Users Manual 1 0

Download:
Mirror Download [FCC.gov]
Document ID	762011
Application ID	kLVMjodSclR/g4pwnsQJsA==
Document Description	Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	9.49kB (118598 bits)
Date Submitted	2007-02-23 00:00:00
Date Available	2007-02-23 00:00:00
Creation Date	2007-02-06 17:40:12
Producing Software	Acrobat Distiller 5.0 (Windows)
Document Lastmod	2007-02-06 17:40:12
Document Title	Microsoft Word - v2 HPRM850 Users Manual 1 0.doc
Document Creator	PScript5.dll Version 5.2.2
Document Author:	Wei

RF Power Amplifiers
High Power Radio Module
Model: HPRM850
Operation Instruction
Date: January 29, 2007
Version. 1.0
Ref#: FCC ID: S8L-100595HPRM
Industry Canada: IC: 2237F-RF100595
Andrew Corporation – Power Amplifier Group
Propriety – Use pursuant to Company Instruction
1 of 3
RF Power Amplifiers
Introduction
This document presents description of the Andrew Corporation 850 Band HPRM (High
Power Radio Module) amplifiers. The HPRMA850 amplifier is a high power, RF
amplifier intended to provide signal amplification and conditioning. The HPRM850
amplifier is compatible with GSM and EDGE air interfaces operating in U.S. domestic
cell sites where FCC compliance is mandatory.
The Cell band (869 MHz to 894 MHz) HPRM850 RF power amplifier is capable of
amplifying a single carrier of different modulation types to a composite power level of
60Watts.
HPRM850 Specifications
The HPRM850 provide linear amplification of single-carrier signals in the cellular
frequency band. The 850 Band HPRM850 has the following specifications:
Parameter
Specification
Operating RF Band
In band RF gain
Input signal types
Operational Bandwidth
Input / Output Impedances
Input DC Power
DC voltage input range
Rated Output Power
@ +26.5 to +27.5VDC input
DC-RF Efficiency
Physical dimensions
Weight
869-894MHz
44dB
GSM or EDGE single carrier
25 MHz (38MHz for-20dB bandwidth, nominal)
50 Ohms
+27 VDC, nominal
+26.5 to +27.5VDC
Cooling technique
Temperature Range
60W average GSM or 45W EDGE
33%, rated output power, nominal input voltage
7.5” x 4” x 1.4”
< 2lbs
The HPRM is a module to be mounted onto the
customer heat sink within his frame. The module
provides a copper pallet interface for thermal cooling
by conduction.
0°C to +60°C meeting specifications.
Table 1 HPRM850 Specifications
Installation and Operation Set-Up
The HPRM850 is easy to operate and use, only requiring a special cables for DC power
and a multipoint connector to provide the ON/OFF state and biasing points to the module
and report the monitoring to the system. RF input and output connections are done with
industry standard MCX and QN connectors.
Andrew Corporation – Power Amplifier Group
Propriety – Use pursuant to Company Instruction
2 of 3
RF Power Amplifiers
FCC Statements:
FCC ID: S8L-100595HPRM
This device complies with Part 2, 15, & 22 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference and (2) this
device must accept any interference received, including interference that may cause
undesired operation.
Warning
Changes of modifications not expressly approved by the manufacturer could void the
user’s authority to operate the equipments.
Industry Canada Statements:
Industry Canada ID: IC: 2237F-RF100595
1. Quality Norms: The testing of the equipment is carried out as the norms stated in IC
standards.
2. Labeling: HPRM850 when sold in Canada will have:
(a) The certification number, prefixed by the term "IC: ", i.e. IC: 2237F-RF100595
(b) The manufacturer's name, trade name or brand name, i.e. Andrew Corporation
(c) A model name or number. Model Name = RF100595/NTN065JA
(d) This device complies with RSS-131, RSS-102 of the IC Rules.
3. External Control
The HPRM850 does not have any external controls accessible to the user for any
adjustments, to operate in violation of the limits prescribed in this Standard. Furthermore,
information on internal adjustments, reconfiguration or programmability of the device
shall only be made available to service depots and agents of the equipment supplier and
NOT to the public.
4. Exposure of Humans to RF Field: The equipment conforms to RSS-102. RF
Exposure compliance is also addressed at the time of licensing.
Andrew Corporation – Power Amplifier Group
Propriety – Use pursuant to Company Instruction
3 of 3

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Create Date                     : 2007:02:06 17:40:12-05:00
Modify Date                     : 2007:02:06 17:40:12-05:00
Page Count                      : 3
Creation Date                   : 2007:02:06 22:40:12Z
Mod Date                        : 2007:02:06 22:40:12Z
Producer                        : Acrobat Distiller 5.0 (Windows)
Author                          : Wei
Metadata Date                   : 2007:02:06 22:40:12Z
Creator                         : Wei
Title                           : Microsoft Word - v2 HPRM850 Users Manual 1 0.doc

EXIF Metadata provided by EXIF.tools