Andrew Base Station Subsystems Group RRH800L1 800MHz 2x50W RRH RF101017 User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1539935
Application ID	btFC/GAE9ycmugJEFbhGfA==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	2.98kB (37218 bits)
Date Submitted	2011-09-10 00:00:00
Date Available	2011-09-10 00:00:00
Creation Date	2011-08-11 19:35:23
Producing Software	Acrobat Distiller 5.0 (Windows)
Document Lastmod	2011-08-11 19:35:23
Document Title	User Manual

800MHz 2x50W RRH – Installation & Operation
The 800MHz 2x50W RRH is installed by hanging and securing the RRH to a wall-mounted or pole-mounted bracket. Once
secured to the mounting bracket, connections are made to the bottom and top interfaces.
The key interfaces that must be used for normal operation are:
1)Primary CPRI input/output port (Interface 1): Connect using weatherproof optical fiber cable(fiber pair) terminated with LC
optical connectors.
2)-48VDC Input (Interface 12): Connect with 2-wire industry standard weatherproof cable. Wires are secured into UL approved
terminal block. (Gauge sized appropriately for length of cable run.)
3)Main duplex port, Tx1/Rx1 (Interface 18): Use low-loss weatherproof RF cable with 7/16DIN connector to connect this port to
base-station main antenna.
4)Diversity duplex port, Tx2/Rx2 (Interface 19): Use low-loss weatherproof RF cable with 7/16DIN connector to connect this port
to base-station diversity antenna.
Mounting Bracket
Can be mounted to wall or pole.
Pole mounting requires additional
hardware (not shown).
PT-104220-EN
PRIVATE AND CONFIDENTIAL
© 2010 CommScope, Inc
12
800MHz 2x50W RRH – FCC Label and Location
FCC Statement on Label located on Right-Side of RRH heatsink fin
FCC
This device complies with Parts 2, 15, & 90 of the FCC Title 47 Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference and (2) This device must accept any interference
received, including interference that may cause undesired operation.
Warning
Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate
the equipment.
FCC Label
Location
Right Side-View
PT-104220-EN
PRIVATE AND CONFIDENTIAL
© 2010 CommScope, Inc
13

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Page Count                      : 2
Creation Date                   : 2011:08:11 23:35:23Z
Mod Date                        : 2011:08:11 23:35:23Z
Producer                        : Acrobat Distiller 5.0 (Windows)
Create Date                     : 2011:08:11 23:35:23Z
Modify Date                     : 2011:08:11 23:35:23Z
Metadata Date                   : 2011:08:11 23:35:23Z

EXIF Metadata provided by EXIF.tools