Andrew Wireless System CAPL7817E19 ION-E Remote Unit for cellular systems User Manual installation instruction

Download:
Mirror Download [FCC.gov]
Document ID	3655130
Application ID	yVcAGE2ii4gyowHnE7iLjQ==
Document Description	installation instruction
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	12.85kB (160656 bits)
Date Submitted	2017-11-28 00:00:00
Date Available	2018-03-15 00:00:00
Creation Date	2017-10-09 13:22:05
Producing Software	Acrobat Distiller 9.5.5 (Windows)
Document Lastmod	2017-10-09 13:22:05
Document Title	Microsoft Word - Installation Instruction ION-E CAP L.doc
Document Creator	PScript5.dll Version 5.2.2
Document Author:	FRFUTTER

COMMSCGPE®
Installation Instruction
Equipment Symbols and Compliance
Table 3 identifies markings used on ION-E hardware and defines what these markings mean, including
required user compliance. Please observe the meanings of the listed symbols and compliance warnings.
Table 3. Compliance Labels
For industrial [Part 20) signal booster
WARNING. ThIS is NOT a CONSUMER device. It is designed for installation by FCC LICENSEES arid
— rcc QUAUFIED INSTALLERS. You MUST have an FCC LICENSE or express consent ofan FCC Licensee to
operate this device. Unauthorized use may result in significant forfeiture penalties, including
penalties in excess orsmopoo iar eacri continuing violation.
WARNING. This IS NOTa CONSUMER device It is designed [or installation by an Installerapprovea
— ISED byanlSEDlicensee.‘/ou MUSThaveanlsED LICENCE ortheexpress consentofanlSEDIicenseeto
operate this device.
To be sold exclusively to mobile opeiators or authorized installers - no harmonized frequency
C 5 CE bands, operation requires license Intended use- EU and EFI'A countries.
indicates (unformltv with the RED directive 2014/sa/Eu and/or RaHS directive 2011/5s/eu,
C E 0100 CE Indicates chVarmity with the RED directive 2014/53/EU and ROHS diremve ZOll/ES/EU unified
bv the notified body no. 0700.
Health and Safety Precautions
Observe all cautions and warnings listed in this section
A high leakage current ground (earth) connection to the Power Supply Unit (PSU) is essential before
making any other connections to the PSU.
Laser radiation. Risk of eye injury in operation. Do not stare into file laser beam; do not view the laser
beam directly or with optical instruments.
High frequency radiation in operation. Risk of health hazards associated with radiation from the
antenna(s) connected to the unit. Implement prevention measures to avoid the pos rty of close
proximity to the antenna(s) while in operation.
The unit is to be used only with Commstope (NEE Class 2) or Limited Power Sorce ION-E subrack.
or eq uivalent.
55>)
COMMSCGPE®
Property Damage Warnings
Keep operating instructions within easy reach and make them available to all users.
Only license holders for the respective frequency range are allowed to operate this unit.
Read and obey all the warning labels attached to the unit. Make sure that all warning labels are kept in a
legible condition. Replace any missing or damaged labels.
Make sure the unit's settings are correct for the intended use (refer to the manufacturer product
information) and regulatory requirements are met. no not carry out any modifications or fit any spare
parts, which are not sold or recommended by the manufacturer.
Db Db
General Installation Safety Requirements
Wet conditions increase the potential for receiving an electrical shock when installing or using electrically
powered equipment. To prevent electrical shock. never install or use electrical equipment in a wet
location or during a lightning storm.
This system is a RF Transmitter and continuously emits RF energy. Maintain a minimum Mnch (20 cm)
clearance from the antenna while the system is operating. Whenever possible, shut down the RAN before
servicing the antenna.
Do not remove caps from any of the connectors until instructed to doso.
A CAP L with a Copper Interface is not designed for outdoor installations—it is not lightning protected.
However. the antenna to which the Copper Interface units attach can be outdoors if suitable
lightning-protection devices are used at the antenna site.
>55)
Guard Against Damage from Electra-Static Discharge
Electrostatic Discharge (ESD) can damage electronic components. To prevent ESD damage, always wear
“A an ESD wrist strap when working with ION—E hardware components. Not all IONvE hardware requires
grounding. For those ION—E hardware components for which grounding is required, connect the ground
wire on the ESD wrist strap to an earth ground source before touching the ION-E component. Wear the
wrist strap the entire time that you work with the IONAE hardware.
COM PLIANCE AN D STANDARDS CERTIFICATION
. This is class A equipment. This equipment can cause radio interference in domestic areas. In this case the
operator can be asked to start preventive action.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : FRFUTTER
Create Date                     : 2017:10:09 13:22:05+02:00
Modify Date                     : 2017:10:09 13:22:05+02:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Creator Tool                    : PScript5.dll Version 5.2.2
Producer                        : Acrobat Distiller 9.5.5 (Windows)
Format                          : application/pdf
Title                           : Microsoft Word - Installation Instruction ION-E CAP L.doc
Creator                         : FRFUTTER
Document ID                     : uuid:a3946c4f-856c-4413-8860-cc4bb6bc851e
Instance ID                     : uuid:b2b9793d-c326-42d8-a3f1-c3ddaa6cd001
Page Count                      : 2

EXIF Metadata provided by EXIF.tools