Andrew NBPCS-9002W Channelized Paging Repeater User Manual Exh D Appendix A

Andrew Corporation Channelized Paging Repeater Exh D Appendix A

Exh D Appendix A

AE02B-A3659 Rev -- APPENDIX ADocument use is restricted to that described on cover A-1APPENDIX AEQUIPMENT LIST AND INSTALLATION1. List of Material•Qty 1 - SelectAmp NBPCS-900-3 Paging Repeater•Qty 1 - User’s Guide (AE02B-A3659)•Qty 1 - Programming Cable (ECABA-20058)•Qty 1 - Adapter, DB-9 (M) to DB-25 (F) (ECNND-95003)•Qty 1 - Power Cable, 6 ft. (ECABL-31111)•Qty 1 - Diskettes (3) containing control software (AE04R-A5949-001)2. InstallationSet the amplifier on a suitable shelf or attach the slides and mount in a 19” rack mountcabinet. Connect the coaxial cable that is attached to the roof antenna (or other device intended tocommunicate with the base station) to the FWD IN / REV OUT port on the back of theamplifier. Connect the coaxial cable that is attached to the interior antenna (or other device intended tocommunicate with the pagers) to the REV IN / FWD OUT port on the back of the amplifier. Attach the supplied power cord to the power entry module at the rear of the amplifier and thenplug the power cable into an appropriate outlet.Turn the main power switch on (located at the rear of the amplifier).Refer to Appendix B for loading the control software and programming the amplifier foroperation.It is recommended to turn down (counter clockwise) the gain adjustment pots on any unusedchannels.

Navigation menu